N-Doped Nonalternant Nanoribbons with Excellent Nonlinear Optical Performance

Two novel N-doped nonalternant nanoribbons ( NNNR-1 and NNNR-2 ) featuring multiple fused N-heterocycles and bulky solubilizing groups were prepared via bottom-up solution synthesis. NNNR-2 achieves a total molecular length of 33.8 Å, which represents the longest soluble N-doped nonalternant nanoribbon reported to date. The pentagon subunits and doping of N atoms in NNNR-1 and NNNR-2 have successfully regulated their electronic properties, achieving high electron affinity and good chemical stability enabled by the nonalternant conjugation and electronic effects. When applied a laser pulse of 532 nm, the 13-rings nanoribbon NNNR-2 shows outstanding nonlinear optical (NLO) responses, with the nonlinear extinction coefficient of 374 cm GW⁻¹, much higher than those of NNNR-1 (96 cm GW⁻¹) and the well-known NLO material C₆₀ (153 cm GW⁻¹). Our findings indicate that the N-doping of nonalternant nanoribbons is an effective strategy to access another type of excellent material system for high-performance NLO applications, which can be extended to construct numerous heteroatom-doped nonalternant nanoribbons with fine-tunable electronic properties.     

Femtosecond Spectroscopy and Nonlinear Optical Properties of aza-BODIPY Derivatives in Solution

The fast relaxation processes in the excited electronic states of functionalized aza-boron-dipyrromethene (aza-BODIPY) derivatives ( 1 – 4 ) were investigated in liquid media at room temperature, including the linear photophysical, photochemical, and nonlinear optical (NLO) properties. Optical gain was revealed for nonfluorescent derivatives 3 and 4 in the near infrared (NIR) spectral range under femtosecond excitation. The values of two-photon absorption (2PA) and excited-state absorption (ESA) cross-sections were obtained for 1–4 in dichloromethane using femtosecond Z-scans, and the role of bromine substituents in the molecular structures of 2 and 4 is discussed. The nature of the excited states involved in electronic transitions of these dyes was investigated using quantum-chemical TD-DFT calculations, and the obtained spectral parameters are in reasonable agreement with the experimental data. Significant 2PA (maxima cross-sections ∼2000 GM), and large ESA cross-sections ∼10⁻²⁰ m² of these new aza-BODIPY derivatives 1–4 along with their measured high photostability reveal their potential for photonic applications in general and optical limiting in particular.     

Thin films of MAPbI3 and MA0.15FA0.75Cs0.1PbI3 perovskites under femtosecond laser irradiation: nonlinear optical absorption and kinetics of photodegradation

The thin MAPbI₃ and MA_0.15FA_0.75Cs_0.1PbI₃ perovskite films have strong nonlinear absorption with coefficients of 443 ± 20 and 830 ± 50 cm GW^–1, respectively, due to two-photon absorption at 1064 nm. The photochemical degradation of perovskite films was observed upon irradiation with femtosecond pulses at 532 nm, and the depth of photodegradation decreased in perovskite films protected with a PMMA polymer layer.     

N=8 Armchair Graphene Nanoribbons: Solution Synthesis and High Charge Carrier Mobility**

Structurally defined graphene nanoribbons (GNRs) have emerged as promising candidates for nanoelectronic devices. Low band gap (<1 eV) GNRs are particularly important when considering the Schottky barrier in device performance. Here, we demonstrate the first solution synthesis of 8-AGNRs through a carefully designed arylated polynaphthalene precursor. The efficiency of the oxidative cyclodehydrogenation of the tailor-made polymer precursor into 8-AGNRs was validated by FT-IR, Raman, and UV/Vis-near-infrared (NIR) absorption spectroscopy, and further supported by the synthesis of naphtho[1,2,3,4-ghi]perylene derivatives ( 1 and 2 ) as subunits of 8-AGNR , with a width of 0.86 nm as suggested by the X-ray single crystal analysis. Low-temperature scanning tunneling microscopy (STM) and solid-state NMR analyses provided further structural support for 8-AGNR . The resulting 8-AGNR exhibited a remarkable NIR absorption extending up to ∼2400 nm, corresponding to an optical band gap as low as ∼0.52 eV. Moreover, optical-pump TeraHertz-probe spectroscopy revealed charge-carrier mobility in the dc limit of ∼270 cm² V⁻¹ s⁻¹ for the 8-AGNR .     

A New Nonlinear Optical Material with N(CN)2− Anion

Discovering new functional genes and developing high-performance materials are the goals being pursued by scientists. In this work, we successfully obtained a second-order nonlinear optical (NLO) material via the aqueous solution method, Y[N(CN)₂]₄[NH(C₂H₅)₃] ⋅ 3H₂O, which is the first NLO material with the anionic group N(CN)₂⁻. Remarkably, this material is not only strongly NLO-active at 1064 nm with a response of about 2.8 × KH₂PO₄, but also possesses a short UV absorption edge of 250 nm. In-depth first-principles calculations illustrate well that the optical properties are mainly from the strong interaction of N, C and Y atoms. This result indicates that the N(CN)₂⁻ anion may be a new NLO functional gene. This work enriches the diversity of NLO functional genes and materials.     

Study of Linear and Nonlinear Optical Properties of Four Derivatives of Substituted Aryl Hydrazones of 1,8‐Naphthalimide

Four 1,8‐naphthalimide hydrazone molecules with different electron‐donating groups have been applied in the study of linear and nonlinear optical (NLO) properties. These compounds showed strong green emission in solution. Their NLO properties such as two‐photon absorption (TPA) behavior with femtosecond laser pulses ca. 800 nm and excited‐state absorption (ESA) behavior with nanosecond laser pulses at 532 nm were investigated. Compound 4 presented the largest two‐photon cross section (550 GM) among them due to two factors: the conjugated length of compound 4 is the longest and the electron‐donating ability of compound 4 is the strongest. Different from TPA behavior, compound 2 showed the best nonlinear absorption properties at 532 nm and its nonlinear absorption coefficient and third‐order nonlinear optical susceptibilities χ ⁽³⁾ were up to 1.41×10^?10 MKS and 4.65×10^?12 esu, respectively. Through the modification of the structure, the nonlinear optical properties of these compounds at different wavelengths (532 and 800 nm) were well tuned. The great broad‐band nonlinear optical properties indicate hydrazones are good candidates for organic nonlinear optical absorption materials.     

Covalent Modification of MoS2 with Poly(N‐vinylcarbazole) for Solid‐State Broadband Optical Limiters

New soluble MoS₂ nanosheets covalently functionalized with poly(N‐vinylcarbazole) (MoS₂–PVK) were in situ synthesized for the first time. In contrast to MoS₂ and MoS₂/PVK blends, both the solution of MoS₂–PVK in DMF and MoS₂–PVK/poly(methyl methacrylate) (PMMA) film show superior nonlinear optical and optical limiting responses. The MoS₂–PVK/PMMA film shows the largest nonlinear coefficients (β_eff) of about 917 cm GW^?1 at λ=532 nm (cf. 100.69 cm GW^?1 for MoS₂/PMMA and 125.12 cm GW^?1 for MoS₂/PVK/PMMA) and about 461 cm GW^?1 at λ=1064 nm (cf. ?48.92 cm GW^?1 for MoS₂/PMMA and 147.56 cm GW^?1 for MoS₂/PVK/PMMA). A larger optical limiting effect, with thresholds of about 0.3 GW cm^?2 at λ=532 nm and about 0.5 GW cm^?2 at λ=1064 nm, was also achieved from the MoS₂–PVK/PMMA film. These values are among the highest reported for MoS₂‐based nonlinear optical materials. These results show that covalent functionalization of MoS₂ with polymers is an effective way to improve nonlinear optical responses for efficient optical limiting devices.     

Enhanced third‐order nonlinear optical properties determined in thin films using the Z‐scan technique: bis(μ‐4,4′‐oxydibenzoato)bis[(4′‐phenyl‐2,2′:6′,2′′‐terpyridine)cobalt(II)]

π‐Conjugated organic materials exhibit high and tunable nonlinear optical (NLO) properties, and fast response times. 4′‐Phenyl‐2,2′:6′,2′′‐terpyridine (PTP) is an important N‐heterocyclic ligand involving π‐conjugated systems, however, studies concerning the third‐order NLO properties of terpyridine transition metal complexes are limited. The title binuclear terpyridine Co^II complex, bis(μ‐4,4′‐oxydibenzoato)‐κ³O,O′:O′′;κ³O′′:O,O′‐bis[(4′‐phenyl‐2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)cobalt(II)], [Co₂(C₁₄H₈O₅)₂(C₂₁H₁₅N₃)₂], (1), has been synthesized under hydrothermal conditions. In the crystal structure, each Co^II cation is surrounded by three N atoms of a PTP ligand and three O atoms, two from a bidentate and one from a symmetry‐related monodentate 4,4′‐oxydibenzoate (ODA²⁻) ligand, completing a distorted octahedral coordination geometry. Neighbouring [Co(PTP)]²⁺ units are bridged by ODA²⁻ ligands to form a ring‐like structure. The third‐order nonlinear optical (NLO) properties of (1) and PTP were determined in thin films using the Z‐scan technique. The title compound shows a strong third‐order NLO saturable absorption (SA), while PTP exhibits a third‐order NLO reverse saturable absorption (RSA). The absorptive coefficient β of (1) is −37.3 × 10⁻⁷ m W⁻¹, which is larger than that (8.96 × 10⁻⁷ m W⁻¹) of PTP. The third‐order NLO susceptibility χ⁽³⁾ values are calculated as 6.01 × 10⁻⁸ e.s.u. for (1) and 1.44 × 10⁻⁸ e.s.u. for PTP.     

N‐Annulated Perylene‐Substituted and Fused Porphyrin Dimers with Intense Near‐Infrared One‐Photon and Two‐Photon Absorption

Fusion of two N‐annulated perylene (NP) units with a fused porphyrin dimer along the S₀–S₁ electronic transition moment axis has resulted in new near‐infrared (NIR) dyes 1 a / 1 b with very intense absorption (ε>1.3×10⁵ M ^?1 cm^?1) beyond 1250 nm. Both compounds displayed moderate NIR fluorescence with fluorescence quantum yields of 4.4×10^?6 and 6.0×10^?6 for 1 a and 1 b , respectively. The NP‐substituted porphyrin dimers 2 a / 2 b have also been obtained by controlled oxidative coupling and cyclodehydrogenation, and they showed superimposed absorptions of the fused porphyrin dimer and the NP chromophore. The excited‐state dynamics of all of these compounds have been studied by femtosecond transient absorption measurements, which revealed porphyrin dimer‐like behaviour. These new chromophores also exhibited good nonlinear optical susceptibility with large two‐photon absorption cross‐sections in the NIR region due to extended π‐conjugation. Time‐dependent density functional theory calculations have been performed to aid our understanding of their electronic structures and absorption spectra.     

trans/cis‐Isomerization of Fluorene‐Bridged Azo Chromophore with Significant Two‐Photon Absorbability at Near‐Infrared Wavelength

Azo‐containing materials have been proven to possess second‐order nonlinear optical (NLO) properties, but their third‐order NLO properties, which involves two‐photon absorption (2PA), has rarely been reported. In this study, we demonstrate a significant 2PA behavior of the novel azo chromophore incorporated with bilateral diphenylaminofluorenes (DPAFs) as a π framework. The electron‐donating DPAF moieties cause a redshifted π–π* absorption band centered at 470 nm, thus allowing efficient blue‐light‐induced trans‐to‐cis photoisomerization with a rate constant of 2.04×10^?1 min^?1 at the photostationary state (PSS). The open‐aperture Z‐scan technique that adopted a femtosecond (fs) pulse laser as excitation source shows an appreciably higher 2PA cross‐section for the fluorene‐derived azo chromophore than that for common azobenzene dyes at near‐infrared wavelength (λ_ex=800 nm). Furthermore, the fs 2PA response is quite uniform regardless of the molecular geometry. On the basis of the computational modeling, the intramolecular charge‐transfer (ICT) process from peripheral diphenylamines to the central azo group through a fluorene π bridge is crucial to this remarkable 2PA behavior.     

Promoting near-infrared photocatalytic activity of carbon-doped carbon nitride via solid alkali activation

Ultrabroad spectral absorption is required for semiconductor photocatalysts utilized for solar-to-chemical energy conversion. The light response range can be extended by element doping, but the photocatalytic performance is generally not enhanced correspondingly. Here we present a solid alkali activation strategy to synthesize near-infrared (NIR) light-activated carbon-doped polymeric carbon nitride (A-cPCN) by combining the copolymerization of melamine and 1,3,5-trimesic acid. The prepared A-cPCN is highly crystalline with a narrowed bandgap and enhanced efficiency in the separation of photogenerated electrons and holes. Under irradiation with NIR light (780 nm ≥ λ ≥ 700 nm), A-cPCN shows an excellent photocatalytic activity for H₂ generation from water with rate of 165 µmol g⁻¹ h⁻¹, and the photo-redox activity for H₂O₂ production (109 µmol g⁻¹ h⁻¹) from H₂O and O₂, whereas no observed photocatalytic activity over pure PCN. The NIR photocatalytic activity is due to carbon doping, which leads to the formation of an interband level, and the alkali activation that achieved shrinking the transfer distance of photocarriers. The current synergistic strategy may open insights to fabricate other carbon-nitrogen-based photocatalysts for enhanced solar energy capture and conversion.     

Gold(III) Complexes of Asymmetrically Aryl‐Substituted 1,2‐Dithiolene Ligands Featuring Potential‐Controlled Spectroscopic Properties: An Insight into the Electronic Properties of bis(Pyren‐1‐yl‐ethylene‐1,2‐dithiolato)Gold(III)

The electrochemical, UV/Vis–NIR absorption, and emission‐spectroscopic features of (TBA⁺)( 1 ⁻) and the corresponding neutral complex 1 were investigated (TBA⁺=tetrabutylammonium; 1 ⁻=[Au^III(Pyr,H‐edt)₂]⁻; Pyr,H‐edt²⁻=pyren‐1‐yl‐ethylene‐1,2‐dithiolato). The intense electrochromic NIR absorption (λ_max=1432 nm; ε=13000 M ⁻¹ cm⁻¹ in CH₂Cl₂) and the potential‐controlled visible emission in the range 400–500 nm, the energy of which depends on the charge of the complex, were interpreted on the grounds of time‐dependent DFT calculations carried out on the cis and trans isomers of 1 , 1 ⁻, and 1 ²⁻. In addition, to evaluate the nonlinear optical properties of 1 ^x− (x=0, 1), first static hyperpolarizability values β_tot were calculated (β_tot=78×10⁻³⁰ and 212×10⁻³⁰ esu for the cis isomer of 1 ⁻ and 1 , respectively) and compared to those of differently substituted [Au(Ar,H‐edt)₂]^x− gold dithiolenes [Ar=naphth‐2‐yl ( 2 ), phenyl ( 3 ); x=0, 1].     

Acid-Modulated Synthesis of Novel π-Conjugated Microporous Polymers for Efficient Metal-Free Photocatalytic Hydrogen Evolution

Simple synthetic modifications that tune the molecular structures, thereby the properties of the molecules, are of topical interest. Herein, we report the synthesis of two novel cationic rosaniline-based conjugated microporous polymers (CMPs) from identical monomers via simple acid modulation (Acetic acid and BF₃ ⋅ Et₂O). The condensation reaction of rosaniline with 2,4,6-triformylphloroglucinol in acetic acid renders β-ketoenamine-linked CMP ( CMP-A ) while changing the acid to BF₃ ⋅ Et₂O, the linkages transform to enol and undergoes BF₂-complexation, leading to boranil CMP ( CMP-B ). BF₂-functionalities in boranil CMP significantly modified the optical and functional properties compared to β-ketoenamine-linked CMP. The cationic-delocalization along with the extended π-delocalization supported by chromophoric BF₂-groups allow CMP-B to exhibit broad absorption spanning the visible to Near-Infrared region (NIR). The absorption red-edge of CMP-B appears around 1277 nm (optical band gap ∼1.58 eV) while CMP-A displays at 981 nm (optical band gap ∼1.83 eV). Most interestingly, as a photocatalyst, CMP-B catalyzes hydrogen evolution with a superior rate of 252 μmol g⁻¹ over CMP-A (100 μmol g⁻¹). It is about 2.5 times higher performance. The transient photocurrent measurements, electrochemical impedance data, and in-depth mott-Schottky analysis demonstrate that the BF₂-group in CMP-B generates photoinduced charge carriers and their migration towards the active sites for photocatalysis. These polymers show significant photocatalytic H₂ generation without any supportive metal co-catalyst. The BF₂ complexed building blocks are a unique class of metal-free photocatalysts for hydrogen evolution through green and cost-effective approach.     

B←N-Incorporated Dibenzo-azaacene with Selective Near-Infrared Absorption and Visible Transparency

Organic compounds with selective near-infrared absorption and visible transparency are very desirable for fabrication of transparent/semitransparent optoelectronic devices. Herein, we develop a molecule with selective near-infrared absorption property, QBNA-O , in which four B←N units are incorporated to the core and two benzodioxin groups are introduced at the termini of the dibenzo-azaacene skeleton. QBNA-O exhibits a small optical gap of 1.39 eV due to the strong electron-donating benzodioxin groups and the strong electron-withdrawing B←N units. In toluene solution, QBNA-O shows a strong absorption peak at 856 nm with the full width at half maximum (FWHM) of only 41 nm as well as very weak absorption in the visible range from 380 nm to 760 nm. Thin films of QBNA-O exhibit the average visible transparency (AVT) of 78 % at the thickness of 205 nm and 90 % at the thickness of 45 nm. Solution-processed organic field-effect transistors (OFETs) of QBNA-O display ambipolar transporting behavior with the electron mobility of 0.52 cm² V⁻¹ s⁻¹ and the hole mobility of 0.013 cm² V⁻¹ s⁻¹ together with excellent air-stability. The selective NIR absorbing property and excellent charge transporting property imply that QBNA-O can be used to fabricate transparent organic optoelectronic devices.     

meso-Cumulenic 2H-Corroles from meso-Ethynyl-3H-corroles

Alkynyl-substituted 3H-corrole 9 a was converted to [3]cumulenic 2H-corrole 10 a by treatment with trimethylsilyl chloride (TMSCl), and 1,3-butadiyne-bridged 3H-corrole dimer 11 b was transformed into [5]cumulene-bridged 2H-corrole dimer 12 b by oxidation with PbO₂. Both 10 a and 12 b were metalated to form Zn^II complexes 10 a-Zn and 12 b-Zn . The structures of 10 a-Zn and 12 b-Zn show planar conformations with bond-length alternations that are analogous to those of tetraaryl [n]cumulenes. The cumulenic corrole dimers 12 b and 12 b-Zn display large NIR absorption bands in the range of 700–1400 nm (maximum ϵ≈1.0×10⁵ m ⁻¹ cm⁻¹) owing to the effective π-conjugation between the two corrole units through the [5]cumulene bridge.     

Optoelectronic and nonlinear optical properties of tBu4PcTiO/polymer composite materials

The optoelectronic and nonlinear optical (NLO) properties of a soluble 2,(3)-(tetra-tert-butylphthalocyaninato)titanium(IV) oxide (tBu₄PcTiO) in solutions and in the solid states have been described. The nonlinear response demonstrated that tBu₄PcTiO exhibited strong RSA at 532 nm for both solution and solid-state based experiments. The decrease in the effective intensity dependent nonlinear absorption coefficient with increasing input intensities possibly results from high order triple state transitions of the excited-state population. No evidence of film fatigue or degradation was observed in the PMMA/tBu₄PcTiO film, after numerous scans at varying laser intensity. The doping of tBu₄PcTiO into poly[2-methoxy-5-(2′-ethylhexyloxy)-p-phenylene-vinylene] (MEH-PPV) results in the apparent increases of the open circuit voltage (Voc) and the short circuit photocurrent density under illumination with 40 mW cm⁻² white-light. The light absorption of tBu₄PcTiO incorporated into polymer represents the dominant contribution to the enhancement of the photocurrent. The dependence of the short circuit photocurrent in an ITO/tBu₄PcTiO-doped MEH-PPV/Al cell on the incident light intensity (I_in) between 30 and 200 mW cm⁻² was also investigated.     

A Near‐Infrared Dye That Undergoes Multiple Interconversions through Acid–Base Equilibrium and Reversible Redox Processes

A near‐infrared (NIR) polymethine dye ( 1 ), consisting of a cyclohepta[1,2‐b ;4,3‐b′ ]dithiophene and two phenol moieties, was synthesized. This dye exhibited pH‐responsive changes in its photophysical properties due to a two‐step acid–base equilibrium that produced a protonated cation ( 1H⁺ ) and an anion ( 1⁻ ). While 1H⁺ showed an intense fluorescence in the red region of the visible spectrum, 1⁻ exhibited a strong absorption in the NIR region. The tropylium ion character in 1H⁺ induces high pK _a1 and pK _a2 values for 1 . Moreover, a stable radical ( 1^. ) was prepared, which showed a NIR absorption band with a maximum at circa 1600 nm. The cyclic voltammogram of 1^. revealed a two‐step reversible redox process that produced 1⁻ and the cation 1⁺ , which is different from 1H⁺ . These redox processes accompany drastic electrochromic changes in the vis–NIR region. Overall, 1 is susceptible to multiple interconversions between five forms, due to the multifaceted character of the cycloheptadithiophene skeleton.     

A Near-Infrared Dye That Undergoes Multiple Interconversions through Acid–Base Equilibrium and Reversible Redox Processes

A near-infrared (NIR) polymethine dye ( 1 ), consisting of a cyclohepta[1,2-b;4,3-b′]dithiophene and two phenol moieties, was synthesized. This dye exhibited pH-responsive changes in its photophysical properties due to a two-step acid–base equilibrium that produced a protonated cation ( 1H⁺ ) and an anion ( 1⁻ ). While 1H⁺ showed an intense fluorescence in the red region of the visible spectrum, 1⁻ exhibited a strong absorption in the NIR region. The tropylium ion character in 1H⁺ induces high pK_a1 and pK_a2 values for 1 . Moreover, a stable radical ( 1^. ) was prepared, which showed a NIR absorption band with a maximum at circa 1600 nm. The cyclic voltammogram of 1^. revealed a two-step reversible redox process that produced 1⁻ and the cation 1⁺ , which is different from 1H⁺ . These redox processes accompany drastic electrochromic changes in the vis–NIR region. Overall, 1 is susceptible to multiple interconversions between five forms, due to the multifaceted character of the cycloheptadithiophene skeleton.     

Cooperation of Three Chromophores Generates the Water‐Resistant Nitrate Nonlinear Optical Material Bi3TeO6OH(NO3)2

Nitrates have long been ignored for practical uses as nonlinear optical (NLO) materials because they are usually very easy to dissolve in water; despite this, the π‐conjugated [NO₃]⁻ is among the most desirable NLO‐active structural units. The cooperation of three structural chromophores, namely, Bi₃O₆OH short chains with 6s² lone pair electrons, distorted TeO₆ octahedra with d¹⁰ electrons, and π‐conjugated [NO₃]⁻ triangles, generates a new nitrate NLO material, Bi₃TeO₆OH(NO₃)₂, which exhibits an enhanced phase‐matchable NLO response of three times that of KH₂PO₄ (3×KH₂PO₄), exceeding those of most nitrate NLO materials. Remarkably, the new material did not show obvious weight loss and degeneration of NLO response after being dipped in de‐ionized water for 24 h, indicating that it is highly resistant to water. Theoretical calculations reveal that foreign water molecules cannot stably stay in the crystal lattice of Bi₃TeO₆OH(NO₃)₂. These findings highlight the introduction of diverse chromophores into the nitrate systems as an effective approach for developing practical nitrate NLO materials that are of high water‐resistance and good optical performance.     

Deep‐Ultraviolet Nonlinear Optics in a Borate Framework with 21‐Ring Channels

A new borate LiBa₃(OH)[B₉O₁₆][B(OH)₄], which combines the uniform porosity of open‐frameworks with the extraordinary NLO properties of borates, has been obtained under hydrothermal conditions by using mixed lithium and barium ions as templates. The framework displays an acs‐type net with large 21‐ring channels. The second harmonic generation (SHG) measurement shows that it is a type I phase‐matchable material with a strong SHG signal intensity about 3.1 times that of KDP (KH₂PO₄). UV/Vis–NIR diffuse reflectance analysis indicates that the compound has a wide transparency range with the short‐wavelength absorption edge below 200 nm. These characteristics reveal that the compound is a promising deep‐UV nonlinear optical material.