Membranes with Fast and Selective Gas‐Transport Channels of Laminar Graphene Oxide for Efficient CO2 Capture

Graphene oxide (GO) nanosheets were engineered to be assembled into laminar structures having fast and selective transport channels for gas separation. With molecular‐sieving interlayer spaces and straight diffusion pathways, the GO laminates endowed as‐prepared membranes with excellent preferential CO₂ permeation performance (CO₂ permeability: 100 Barrer, CO₂/N₂ selectivity: 91) and extraordinary operational stability (>6000 min), which are attractive for implementation of practical CO₂ capture.     

Graphene Oxide Membranes with Heterogeneous Nanodomains for Efficient CO2 Separations

Achieving high membrane performance in terms of gas permeance and carbon dioxide selectivity is an important target in carbon capture. Aiming to manipulate the channel affinity towards CO₂ to implement efficient separations, gas separation membranes containing CO₂‐philic and non‐CO₂‐philic nanodomains in the interlayer channels of graphene oxide (GO) were formed by intercalating poly(ethylene glycol) diamines (PEGDA). PEGDA reacts with epoxy groups on the GO surface, constructing CO₂‐philic nanodomains and rendering a high sorption capacity, whereas unreacted GO surfaces give non‐CO₂‐philic nanodomains, rendering low‐friction diffusion. Owing to the orderly stacking of nanochannels through cross‐linking and the heterogeneous nanodomains with moderate CO₂ affinity, a GO‐PEGDA500 membrane exhibits a high CO₂ permeance of 175.5 GPU and a CO₂/CH₄ selectivity of 69.5, which is the highest performance reported for dry‐state GO‐stacking membranes.     

Structure Regulation of MOF Nanosheet Membrane for Accurate H2/CO2 Separation

High-purity H₂ production accompanied with a precise decarbonization opens an avenue to approach a carbon-neutral society. Metal–organic framework nanosheet membranes provide great opportunities for an accurate and fast H₂/CO₂ separation, CO₂ leakage through the membrane interlayer galleries decided the ultimate separation accuracy. Here we introduce low dose amino side groups into the Zn₂(benzimidazolate)₄ conformation. Physisorbed CO₂ served as interlayer linkers, gently regulated and stabilized the interlayer spacing. These evoked a synergistic effect of CO₂ adsorption-assisted molecular sieving and steric hinderance, whilst exquisitely preserving apertures for high-speed H₂ transport. The optimized amino membranes set a new record for ultrathin nanosheet membranes in H₂/CO₂ separation (mixture separation factor: 1158, H₂ permeance: 1417 gas permeation unit). This strategy provides an effective way to customize ultrathin nanosheet membranes with desirable molecular sieving ability.     

Cross-Linking between Sodalite Nanoparticles and Graphene Oxide in Composite Membranes to Trigger High Gas Permeance,Selectivity, and Stability in Hydrogen Separation

Thin membranes (900 nm) were prepared by direct transformation of infiltrated amorphous precursor nanoparticles, impregnated in a graphene oxide (GO) matrix, into hydroxy sodalite (SOD) nanocrystals. The amorphous precursor particles rich in silanols (Si−OH) enhanced the interactions with the GO, thus leading to the formation of highly adhesive and stable SOD/GO membranes via strong bonding. The cross-linking of SOD nanoparticles with the GO in the membranes promoted both the high gas permeance and enhanced selectivity towards H₂ from a mixture containing CO₂ and H₂O. The SOD/GO membranes are moisture resistance and exhibit steady separation performance (H₂ permeance of about 4900 GPU and H₂/CO₂ selectivity of 56, with no degradation in performance during the test of 50 h) at high temperature (200 °C) under water vapor (4 mol %).     

Cross‐Linking between Sodalite Nanoparticles and Graphene Oxide in Composite Membranes to Trigger High Gas Permeance,Selectivity, and Stability in Hydrogen Separation

Thin membranes (900 nm) were prepared by direct transformation of infiltrated amorphous precursor nanoparticles, impregnated in a graphene oxide (GO) matrix, into hydroxy sodalite (SOD) nanocrystals. The amorphous precursor particles rich in silanols (Si?OH) enhanced the interactions with the GO, thus leading to the formation of highly adhesive and stable SOD/GO membranes via strong bonding. The cross‐linking of SOD nanoparticles with the GO in the membranes promoted both the high gas permeance and enhanced selectivity towards H₂ from a mixture containing CO₂ and H₂O. The SOD/GO membranes are moisture resistance and exhibit steady separation performance (H₂ permeance of about 4900 GPU and H₂/CO₂ selectivity of 56, with no degradation in performance during the test of 50 h) at high temperature (200 °C) under water vapor (4 mol %).     

Continuous Porous Aromatic Framework Membranes with Modifiable Sites for Optimized Gas Separation

Continuous microporous membranes are widely studied for gas separation, due to their low energy premium and strong molecular specificity. Porous aromatic frameworks (PAFs) with their exceptional stability and structural flexibility are suited to a wide range of separations. Main-stream PAF-based membranes are usually prepared with polymeric matrices, but their discrete entities and boundary defects weaken their selectivity and permeability. The synthesis of continuous PAF membranes is still a major challenge because PAFs are insoluble. Herein, we successfully synthesized a continuous PAF membrane for gas separation. Both pore size and chemistry of the PAF membrane were modified by ion-exchange, resulting in good selectivity and permeance for the gas mixtures H₂/N₂ and CO₂/N₂. The membrane with Br^? as a counter ion in the framework exhibited a H₂/N₂ selectivity of 72.7 with a H₂ permeance of 51844 gas permeation units (GPU). When the counter ions were replaced by BF₄^?, the membrane showed a CO₂ permeance of 23058 GPU, and an optimized CO₂/N₂ selectivity of 60.0. Our results show that continuous PAF membranes with modifiable pores are promising for various gas separation situations.     

CO2在氨基改性MIL-101(Cr)中吸附的分子模拟

采用实验与分子模拟结合的方法研究298 K下CO_2在氨基改性得到的MIL-101(Cr)-NH_2和MIL-101(Cr)-ED(ED:乙二胺)上的吸附性能。比较MIL-101(Cr)、MIL-101(Cr)-NH_2和MIL-101(Cr)-ED的吸附等温线与吸附热的结果,表明采用直接合成改性法得到的MIL-101(Cr)-NH_2比采用合成后再改性得到的MIL-101(Cr)-ED有更高的CO_2吸附容量。进一步比较密度分布图和径向密度分布曲线,分析CO_2在氨基改性MIL-101(Cr)中的吸附位,表明在低压下CO_2首先吸附在MIL-101(Cr)微孔的超级四面体中,随着吸附压力的增大逐渐填充到更大的孔中。氨基的存在增加了CO_2的吸附位点,使MIL-101(Cr)-NH_2具有较高CO_2吸附容量;同时MIL-101(Cr)-ED中的ED分子的存在增加了CO_2的吸附位点,使MIL-101(Cr)-ED也具有较高CO_2吸附容量;但是MIL-101(Cr)-ED中的ED分子占据了MIL-101(Cr)中Cr的吸附位点,使Cr对CO_2的吸附强度减弱,同时可吸附位点少于MIL-101(Cr)-NH_2,导致其对CO_2的吸附容量少于MIL-101(Cr)-NH_2。     

CO2在氨基改性MIL-101(Cr)中吸附的分子模拟

采用实验与分子模拟结合的方法研究298 K下CO₂在氨基改性得到的MIL-101（Cr）-NH₂和MIL-101（Cr）-ED（ED：乙二胺）上的吸附性能。比较MIL-101（Cr）、MIL-101（Cr）-NH₂和MIL-101（Cr）-ED的吸附等温线与吸附热的结果,表明采用直接合成改性法得到的MIL-101（Cr）-NH₂比采用合成后再改性得到的MIL-101（Cr）-ED有更高的CO₂吸附容量。进一步比较密度分布图和径向密度分布曲线,分析CO₂在氨基改性MIL-101（Cr）中的吸附位,表明在低压下CO₂首先吸附在MIL-101（Cr）微孔的超级四面体中,随着吸附压力的增大逐渐填充到更大的孔中。氨基的存在增加了CO₂的吸附位点,使MIL-101（Cr）-NH₂具有较高CO₂吸附容量;同时MIL-101（Cr）-ED中的ED分子的存在增加了CO₂的吸附位点,使MIL-101（Cr）-ED也具有较高CO₂吸附容量;但是MIL-101（Cr）-ED中的ED分子占据了MIL-101（Cr）中Cr的吸附位点,使Cr对CO₂的吸附强度减弱,同时可吸附位点少于MIL-101（Cr）-NH₂,导致其对CO₂的吸附容量少于MIL-101（Cr）-NH₂。     

Characterization of SAPO-34 membranes by water adsorption

The effects of humidity on gas permeation were studied for five SAPO-34 membranes with different fractions of permeation through non-SAPO pores. Membranes with high CO₂/CH₄ separation selectivities (>20) were stable in humidified gases, but degradation was seen for some membranes after months of exposure to the laboratory atmosphere. Once the membranes started to degrade, the rate of degradation appeared to accelerate. The degradation created non-SAPO pores that were larger than the SAPO-34 pores, as indicated by i-C₄H₁₀ permeance, CO₂/CH₄ selectivity, and CO₂ flux dependence on pressure. The effect of humidity on gas permeance correlated with these indicators of non-SAPO pores. Adsorbed water appeared to completely block the SAPO pores, but permeation through non-SAPO pores increased with humidity. Therefore, water adsorption can be used to determine membrane quality and the fraction of transport through non-SAPO pores.     

A Highly Permeable Aligned Montmorillonite Mixed‐Matrix Membrane for CO2 Separation

Highly permeable montmorillonite layers bonded and aligned with the chain stretching orientation of polyvinylamineacid are immobilized onto a porous polysulfone substrate to fabricate aligned montmorillonite/polysulfone mixed‐matrix membranes for CO₂ separation. High‐speed gas‐transport channels are formed by the aligned interlayer gaps of the modified montmorillonite, through which CO₂ transport primarily occurs. High CO₂ permeance of about 800 GPU is achieved combined with a high mixed‐gas selectivity for CO₂ that is stable over a period of 600 h and independent of the water content in the feed.     

Tuning the Stacking Modes of Ultrathin Two-Dimensional Metal–Organic Framework Nanosheet Membranes for Highly Efficient Hydrogen Separation

Two-dimensional (2D) metal–organic framework (MOF) membranes are considered potential gas separation membranes of the next generation due to their structural diversity and geometrical functionality. However, achieving a rational structure design for a 2D MOF membrane and understanding the impact of MOF nanosheet stacking modes on membrane separation performance remain challenging tasks. Here, we report a novel kind of 2D MOF membrane based on [Cu₂Br(IN)₂]_n (IN=isonicotinato) nanosheets and propose that synergetic stacking modes of nanosheets have a significant influence on gas separation performance. The stacking of the 2D MOF nanosheets is controlled by solvent droplet dynamic behaviors at different temperatures of drop coating. Our 2D MOF nanosheet membranes exhibit high gas separation performances for H₂/CH₄ (selectivity >290 with H₂ permeance >520 GPU) and H₂/CO₂ (selectivity >190 with H₂ permeance >590 GPU) surpassing the Robeson upper bounds, paving a potential way for eco-friendly H₂ separation.     

Fabrication of Crystalline Microporous Membrane from 2D MOF Nanosheets for Gas Separation

Metal‐organic frameworks (MOFs)‐based membranes have shown great potentials as applications in gas separation. In this work, a uniform membrane based on 2D MOF Ni₃(HITP)₂ (HITP=2,3,6,7,10,11‐hexaaminotriphenylene) was fabricated on ordered macroporous AAO via the filtration method. To fabricate the membrane, we obtained the Ni₃(HITP)₂ nanosheets as building blocks via a soft‐physical exfoliation method successfully that were confirmed by AFM and TEM. We also studied the H₂, CO₂ and N₂ adsorption isotherms of Ni₃(HITP)₂ powder at room temperature, which shows Ni₃(HITP)₂ has high heats of adsorption for CO₂ and high selectivity of CO₂ over N₂. Gas permeation tests indicate that the Ni₃(HITP)₂ membrane shows high permeance and selectivity of CO₂ over N₂, as well as good selectivity of H₂ over N₂. The ideal separation factors of CO₂/N₂ and H₂/N₂ from sing‐gas permeances are 13.6 and 7.8 respectively, with CO₂ permeance of 3.15×10^?6 mol?m^?2?s^?1?Pa^?1. The membrane also showed good stability, durability and reproducibility, which are of potential interest for practical applications in the CO₂ separations.     

Designing GO Channels with High Selectivity for CO2/N2 Separation via Incorporating Metal Ions

Graphene oxide (GO) membranes holds great potential for high-performance CO₂ capture. Aiming at enhancing the CO₂ separation performance and structural stability of GO membranes, functionalizing GO channels with metal ions confers a promising strategy. In this study, we reported the fabrication of metal ion-incorporated GO membranes with remarkably improved CO₂/N₂ separation performance. The metal ions within GO channels contribute to facilitating CO₂ transport, decreasing N₂ solubility, hindering N₂ diffusion, and form multiple interactions with GO nanosheets. After introducing Mg²⁺ ions, the CO₂/N₂ separation factor of GO membrane is remarkably increased from 4 to 48.8 with the CO₂ permeance increases 1.5 times. Moreover, the separation performance of the GO-Mg²⁺ membranes shows an excellent long-term stability owing to the structural robustness. This study could provide insights into the regulation of the microstructure of metal ion-functionalized GO membranes for highly selective transport of specific molecules.     

Remarkably Enhanced Gas Separation by Partial Self‐Conversion of a Laminated Membrane to Metal–Organic Frameworks

Separation methods based on 2D interlayer galleries are currently gaining widespread attention. The potential of such galleries as high‐performance gas‐separation membranes is however still rarely explored. Besides, it is well recognized that gas permeance and separation factor are often inversely correlated in membrane‐based gas separation. Therefore, breaking this trade‐off becomes highly desirable. Here, the gas‐separation performance of a 2D laminated membrane was improved by its partial self‐conversion to metal–organic frameworks. A ZIF‐8‐ZnAl‐NO₃ layered double hydroxide (LDH) composite membrane was thus successfully prepared in one step by partial conversion of the ZnAl‐NO₃ LDH membrane, ultimately leading to a remarkably enhanced H₂/CH₄ separation factor and H₂ permeance.     

Pebax/TSIL blend thin film composite membranes for CO_2 separation

In this study a thin film composite (TFC) membrane with a Pebax/Task-specific ionic liquid (TSIL) blend selective layer was prepared. Defect-free Pebax/TSIL layers were coated successfully on a polysulfone ultrafiltration porous support with a polydimethylsiloxane (PDMS) gutter layer. Different parameters in the membrane preparation (e.g. concentration, coating time) were investigated and optimized. The morphology of the membranes was studied by scanning electron microscopy (SEM), while the thermal properties and chemical structures of the membrane materials were investigated by thermo-gravimetric analyzer (TGA), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The CO₂ separation performance of the membrane was evaluated using a mixed gas permeation test. Experimental results show that the incorporation of TSIL into the Pebax matrix can significantly increase both CO₂ permeance and CO₂/N₂ selectivity. With the presence of water vapor, the membrane exhibits the best CO₂/N₂ selectivity at a relative humidity of around 75%, where a CO₂ permeance of around 500 GPU and a CO₂/N₂ selectivity of 46 were documented. A further increase in the relative humidity resulted in higher CO₂ permeance but decreased CO₂/N₂ selectivity. Experiments also show that CO₂ permeance decreases with a CO₂ partial pressure increase, which is considered a characteristic in facilitated transport membranes.     

A Uniformly Oriented MFI Membrane for Improved CO2 Separation

Membrane separation of CO₂ from natural gas, biogas, synthesis gas, and flu gas is a simple and energy‐efficient alternative to other separation techniques. But results for CO₂‐selective permeance have always been achieved by randomly oriented and thick zeolite membranes. Thin, oriented membranes have great potential to realize high‐flux and high‐selectivity separation of mixtures at low energy cost. We now report a facile method for preparing silica MFI membranes in fluoride media on a graded alumina support. In the resulting membrane straight channels are uniformly vertically aligned and the membrane has a thickness of 0.5 μm. The membrane showed a separation selectivity of 109 for CO₂/H₂ mixtures and a CO₂ permeance of 51×10^?7 mol m^?2 s^?1 Pa^?1 at ?35 °C, making it promising for practical CO₂ separation from mixtures.     

Separation of CO2 and CH4 by a DDR membrane

The permeation of CO₂ and CH₄ and their binary mixtures through a DDR membrane has been investigated over a wide range of temperatures and pressures. The synthesized DDR membrane exhibits a high permeance and maintains a very high selectivity for CO₂. At a total pressure of 101 kPa, the highest selectivity for CO₂ in a 50∶50 feed mixture was found to be over 4000 at 225 K. This is ascribed to the higher adsorption affinity, as well as to the higher mobility for the smaller CO₂ molecules in the zeolite, preventing the bypassing of the CH₄ through the membrane. An engineering model, based on the generalized Maxwell-Stefan equations, has been used to interpret the transport phenomena in the membrane. The feasibility of DDR membranes as applied to CO₂ removal from natural gas or biogas is anticipated.     

Metal–Organic Framework Crystal–Glass Composite Membranes with Preferential Permeation of Ethane

Metal–organic framework (MOF) glass is an easy to process and self-supported amorphous material that is suitable for fabricating gas separation membranes. However, MOF glasses, such as ZIF-62 and ZIF-4 have low porosity, which makes it difficult to obtain membranes with high permeance. Here, a self-supported MOF crystal–glass composite (CGC) membrane was prepared by melt quenching a mixture of ZIF-62 as the membrane matrix and ZIF-8 as the filler. The conversion of ZIF-62 from crystal to glass and the simultaneous partial melting of ZIF-8 facilitated by the melt state of ZIF-62 make the CGC membrane monolithic, eliminating non-selective grain boundaries and improving selectivity. The thickness of CGC membrane can be adjusted to fabricate a membrane without the need of a support substrate. CGC membranes exhibit a C₂H₆ permeance of 41 569 gas permeation units (GPU) and a C₂H₆/C₂H₄ selectivity of 7.16. The CGC membrane has abundant pores from the glassy state of ZIF-62 and the crystalline ZIF-8, which enables high gas permeance. ZIF-8 has preferential adsorption for C₂H₆ and promotes C₂H₆ transport in the membrane, and thus the GCG membrane exhibits ultrahigh C₂H₆ permeance and good C₂H₆/C₂H₄ selectivity.     

Correlation between Performances of Hollow Fibers and Flat Membranes for Gas Separation

This work presents an attempt at correlating the available permeability/selectivity literature data for hollow fibers and flat membranes. Therefore, this paper gathers the information pertaining to membrane materials for which membrane properties of flat membranes and hollow fibers have both been reported. An overview of the relations between selectivity and permeance of hollow fiber membranes for various gas pairs (O₂/N₂, CO₂/CH₄, CO₂/N₂, H₂/N₂, H₂/CO₂, H₂/CH₄ and He/N₂) is presented first. The upper bound lines are the ones proposed by Robeson, which were calculated by assuming a one-micron-thick skin layer as proposed by Robeson in 2008. From the results obtained, a relation between the selectivity ratio in both kinds of membranes (α_H/α_f) and skin layer thickness (l) calculated from flat membranes and hollow fibers gas permeation data for these pairs of gases is also presented. The skin layer thicknesses measured using seven different experimental techniques for six commercial membranes are compared. The influences of spinning parameters on the morphology and performance of hollow fiber membrane gas separation are discussed. Finally, an analysis is made of the reasons why the dense skin layer thicknesses of a hollow fiber calculated using permeance and permeability data vary for different gases and also differ from direct experimental measurements.     

Pebax‐Based Membrane Filled with Two‐Dimensional Mxene Nanosheets for Efficient CO2 Capture

Mixed matrix membranes (MMMs) made from inorganic fillers and polymers is a kind of promising candidate for gas separation. In this work, two‐dimensional MXene nanosheets were synthesized and incorporated into a polyether‐polyamide block copolymer (Pebax) matrix to fabricate MMM for CO₂ capture. The physicochemical properties of MXene nanosheets and MXene/Pebax membranes were studied systematically. The introduction of MXene nanosheets provided additional molecular transport channels and meanwhile enhanced the CO₂ adsorption capacity, thereby enhancing both the CO₂ peremance and CO₂/N₂ selectivity of Pebax membrane. The optimized MXene/Pebax membrane with a MXene loading of 0.15 wt % displayed a high separation performance with a CO₂ permeance of 21.6 GPU and a CO₂/N₂ selectivity of 72.5, showing potential application in CO₂ capture.