Highly enantioselective sulfa-Michael addition reactions using N-heterocyclic carbene as a non-covalent organocatalyst

We report the first asymmetric sulfa-Michael addition (SMA) reactions using a chiral N-heterocyclic carbene (NHC) as a non-covalent organocatalyst. We demonstrate that a triazolium salt derived NHC functions as an excellent Brønsted base to promote enantioselective carbon–sulfur bond formation. The reaction is applicable to a wide range of thiols and electrophilic olefins. Notably, quaternary chiral centers bearing both an S atom and a CF₃ group were synthesized with excellent asymmetric control. Mechanistic studies suggest that the facial discrimination is likely to be guided by non-covalent interactions: hydrogen bonding and π–π stacking.     

Mechanisms and energetics of free radical initiated disulfide bond cleavage in model peptides and insulin by mass spectrometry

We investigate the mechanism of disulfide bond cleavage in gaseous peptide and protein ions initiated by a covalently-attached regiospecific acetyl radical using mass spectrometry (MS). Highly selective S–S bond cleavages with some minor C–S bond cleavages are observed by a single step of collisional activation. We show that even multiple disulfide bonds in intact bovine insulin are fragmented in the MS2 stage, releasing the A- and B-chains with a high yield, which has been challenging to achieve by other ion activation methods. Yet, regardless of the previous reaction mechanism studies, it has remained unclear why (1) disulfide bond cleavage is preferred to peptide backbone fragmentation, and why (2) the S–S bond that requires the higher activation energy conjectured in previously suggested mechanisms is more prone to be cleaved than the C–S bond by hydrogen-deficient radicals. To probe the mechanism of these processes, model peptides possessing deuterated β-carbon(s) at the disulfide bond are employed. It is suggested that the favored pathway of S–S bond cleavage is triggered by direct acetyl radical attack at sulfur with concomitant cleavage of the S–S bond (S_H2). The activation energy for this process is substantially lower by ∼9–10 kcal mol^–1 than those of peptide backbone cleavage processes determined by density functional quantum chemical calculations. Minor reaction pathways are initiated by hydrogen abstraction from the α-carbon or the β-carbon of a disulfide, followed by β-cleavages yielding C–S or S–S bond scissions. The current mechanistic findings should be generally applicable to other radical-driven disulfide bond cleavages with different radical species such as the benzyl and methyl pyridyl radicals.     

Can acyclic conformational control be achieved via a sulfur–fluorine gauche effect?

The gauche conformation of the 1,2-difluoroethane motif is known to involve stabilising hyperconjugative interactions between donor (bonding, σ_C–H) and acceptor (antibonding, σ*C–F) orbitals. This model rationalises the generic conformational preference of F–C_β–C_α–X systems (φ_FCCX ≈ 60°), where X is an electron deficient substituent containing a Period 2 atom. Little is known about the corresponding Period 3 systems, such as sulfur and phosphorus, where multiple oxidation states are possible. Conformational analyses of β-fluorosulfides, -sulfoxides and -sulfones are disclosed here, thus extending the scope of the fluorine gauche effect to the 3rd Period (F–C–C–S(O)_n; φ_FCCS ≈ 60°). Synergy between experiment and computation has revealed that the gauche effect is only pronounced in structures bearing an electropositive vicinal sulfur atom (S⁺–O^–, SO₂).     

Diaryldichalcogenide radical cations

One-electron oxidation of two series of diaryldichalcogenides (C₆F₅E)₂ (13a–c) and (2,6-Mes₂C₆H₃E)₂ (16a–c) was studied (E = S, Se, Te). The reaction of 13a and 13b with AsF₅ and SbF₅ gave rise to the formation of thermally unstable radical cations [(C₆F₅S)₂]˙⁺ (14a) and [(C₆F₅Se)₂]˙⁺ (14b) that were isolated as [Sb₂F₁₁]^– and [As₂F₁₁]^– salts, respectively. The reaction of 13c with AsF₅ afforded only the product of a Te–C bond cleavage, namely the previously known dication [Te₄]²⁺ that was isolated as [AsF₆]^– salt. The reaction of (2,6-Mes₂C₆H₃E)₂ (16a–c) with [NO][SbF₆] provided the corresponding radical cations [(2,6-Mes₂C₆H₃E)₂]˙⁺ (17a–c; E = S, Se, Te) in the form of thermally stable [SbF₆]^– salts in nearly quantitative yields. The electronic and structural properties of these radical cations were probed by X-ray diffraction analysis, EPR spectroscopy, and density functional theory calculations and other methods.     

A macrocycle-assisted nanoparticlization process for bulk Ag2S

We report herein a new nanoparticlization process for the bulk-to-nano transformation of Ag₂S by incorporating both top-down and bottom-up approaches. Bulk Ag₂S was dissolved in solution with the assistance of a macrocyclic ligand, hexamethylazacalix[6]pyridine (Py[6]), to produce polynuclear silver sulfide cluster aggregates. All Ag–S cluster aggregates obtained in three crystalline complexes were protected by Py[6] macrocycles. Removing the protective Py[6] macrocycles by protonation led to the generation of unconventional Ag–S nanoparticles with a large energy gap. Theoretical calculations by a hybrid DFT method demonstrated that the silver sulfide clusters with high Ag/S ratio exhibited more localized HOMO–LUMO orbitals, which consequently enlarged their band gap energies. These experimental and theoretical studies broaden our understanding of the fabrication of nanomaterials by virtue of the advantages of both bottom-up and top-down methods and meanwhile provide a viable means of adjusting the band gap of binary nanomaterials independent of their size.     

Modified cyclodextrins solubilize elemental sulfur in water and enable biological sulfane sulfur delivery

An important form of biological sulfur is sulfane sulfur, or S⁰, which is found in polysulfide and persulfide compounds as well as in elemental sulfur. Sulfane sulfur, often in the form of S₈, functions as a key energy source in the metabolic processes of thermophilic Archaean organisms found in sulfur-rich environments and can be metabolized both aerobically and anaerobically by different archaeons. Despite this importance, S₈ has a low solubility in water (∼19 nM), raising questions of how it can be made chemically accessible in complex environments. Motivated by prior crystallographic data showing S₈ binding to hydrophobic motifs in filamentous glycoproteins from the sulfur reducing Staphylothermus marinus anaerobe, we demonstrate that simple macrocyclic hydrophobic motifs, such as 2-hydroxypropyl β-cyclodextrin (2HPβ), are sufficient to solubilize S₈ at concentrations up to 2.0 ± 0.2 mM in aqueous solution. We demonstrate that the solubilized S₈ can be reduced with the common reductant tris(2-carboxyethyl)phosphine (TCEP) and reacts with thiols to generate H₂S. The thiol-mediated conversion of 2HPβ/S₈ to H₂S ranges from 80% to quantitative efficiency for Cys and glutathione (GSH). Moreover, we demonstrate that 2HPβ can catalyze the Cys-mediated reduction of S₈ to H₂S in water. Adding to the biological relevance of the developed systems, we demonstrate that treatment of Raw 264.7 macrophage cells with the 2HPβ/S₈ complex prior to LPS stimulation decreases NO₂⁻ levels, which is consistent with known activities of bioavailable H₂S and sulfane sulfur. Taken together, these investigations provide a new strategy for delivering H₂S and sulfane sulfur in complex systems and more importantly provide new insights into the chemical accessibility and storage of S⁰ and S₈ in biological environments.

Sulfane sulfur, or S⁰, is found in polysulfide and persulfide compounds in biology. We demonstrate that modified cyclodextrins can solubilize S₈ in water, increase its reactivity with biological nucleophiles, and enable delivery to live cells.     

Protonation state of the Cu4S2 CuZ site in nitrous oxide reductase: redox dependence and insight into reactivity

Spectroscopic and computational methods have been used to determine the protonation state of the edge sulfur ligand in the Cu₄S₂ Cu_Z form of the active site of nitrous oxide reductase (N₂OR) in its 3Cu^ICu^II (1-hole) and 2Cu^I2Cu^II (2-hole) redox states. The EPR, absorption, and MCD spectra of 1-hole Cu_Z indicate that the unpaired spin in this site is evenly delocalized over Cu_I, Cu_II, and Cu_IV. 1-hole Cu_Z is shown to have a μ₂-thiolate edge ligand from the observation of S–H bending modes in the resonance Raman spectrum at 450 and 492 cm^–1 that have significant deuterium isotope shifts (–137 cm^–1) and are not perturbed up to pH 10. 2-hole Cu_Z is characterized with absorption and resonance Raman spectroscopies as having two Cu–S stretching vibrations that profile differently. DFT models of the 1-hole and 2-hole Cu_Z sites are correlated to these spectroscopic features to determine that 2-hole Cu_Z has a μ₂-sulfide edge ligand at neutral pH. The slow two electron (+1 proton) reduction of N₂O by 1-hole Cu_Z is discussed and the possibility of a reaction between 2-hole Cu_Z and O₂ is considered.     

MM quadruply bonded complexes supported by vinylbenzoate ligands: synthesis,characterization, photophysical properties and application as synthons

From the reactions between M₂(TⁱPB)₄ compounds and meta and para-vinylbenzoic acids (2 equiv.) in toluene at room temperature the compounds trans-M₂(TⁱPB)₂L₂, where L = m-vinylbenzoate 1A (M = Mo) and 1B (M = W) and TⁱPB = 2,4,6-triisopropylbenzoate, and where L = p-vinylbenzoate 2A (M = Mo) and 2B (M = W) have been isolated. Compounds 1A and 2A have been shown to undergo Heck carbon–carbon coupling reactions with phenyliodide to produce trans-Mo₂(TⁱPB)₂(O₂CC₆H₄-m-CHCH–C₆H₅)₂, 3A and trans-Mo₂(TⁱPB)₂(O₂CC₆H₄-p-CHCH–C₆H₅)₂, 4A. The molybdenum compounds 1A and 2A have been structurally characterized by single crystal X-ray crystallography. All the new compounds have been characterized by ¹H NMR, IR, UV-visible absorption and emission spectroscopy, high resolution MALDI-TOF MS, fs- and ns-transient absorption spectroscopy and fs-time-resolved IR spectroscopy. Electronic structure calculations employing density functional theory, DFT, and time-dependent DFT have been employed to aid in the interpretation of spectral data. All compounds show intense absorptions in the visible region corresponding to M₂δ to Lπ* charge transfer transitions. The lifetimes of the ¹MLCT state fall in the range of 1–10 ps and for the molybdenum complexes the T₁ states are ³δδ* with lifetimes ∼50 μs while for the tungsten complexes the T₁ are ³MLCT with lifetimes in the range of 3–10 ns.     

Self-assembly of a mesoporous ZnS/mediating interface/CdS heterostructure with enhanced visible-light hydrogen-production activity and excellent stability

We designed and successfully fabricated a ZnS/CdS 3D mesoporous heterostructure with a mediating Zn_1–xCd_xS interface that serves as a charge carrier transport channel for the first time. The H₂-production rate and the stability of the heterostructure involving two sulfides were dramatically and simultaneously improved by the careful modification of the interface state via a simple post-annealing method. The sample prepared with the optimal parameters exhibited an excellent H₂-production rate of 106.5 mmol h^–1 g^–1 under visible light, which was 152 and 966 times higher than CdS prepared using ethylenediamine and deionized water as the solvent, respectively. This excellent H₂-production rate corresponded to the highest value among the CdS-based photocatalysts. Moreover, this heterostructure showed excellent photocatalytic stability over 60 h.     

Bis[pyrrolyl Ru(ii)] triads: a new class of photosensitizers for metal–organic photodynamic therapy

A new family of ten dinuclear Ru(ii) complexes based on the bis[pyrrolyl Ru(ii)] triad scaffold, where two Ru(bpy)₂ centers are separated by a variety of organic linkers, was prepared to evaluate the influence of the organic chromophore on the spectroscopic and in vitro photodynamic therapy (PDT) properties of the compounds. The bis[pyrrolyl Ru(ii)] triads absorbed strongly throughout the visible region, with several members having molar extinction coefficients (ε) ≥ 10⁴ at 600–620 nm and longer. Phosphorescence quantum yields (Φ_p) were generally less than 0.1% and in some cases undetectable. The singlet oxygen quantum yields (Φ_Δ) ranged from 5% to 77% and generally correlated with their photocytotoxicities toward human leukemia (HL-60) cells regardless of the wavelength of light used. Dark cytotoxicities varied ten-fold, with EC₅₀ values in the range of 10–100 μM and phototherapeutic indices (PIs) as large as 5400 and 260 with broadband visible (28 J cm^–2, 7.8 mW cm^–2) and 625 nm red (100 J cm^–2, 42 mW cm^–2) light, respectively. The bis[pyrrolyl Ru(ii)] triad with a pyrenyl linker (5h) was especially potent, with an EC₅₀ value of 1 nM and PI > 27 000 with visible light and subnanomolar activity with 625 nm light (100 J cm^–2, 28 mW cm^–2). The lead compound 5h was also tested in a tumor spheroid assay using the HL60 cell line and exhibited greater photocytotoxicity in this more resistant model (EC₅₀ = 60 nM and PI > 1200 with 625 nm light) despite a lower dark cytotoxicity. The in vitro PDT effects of 5h extended to bacteria, where submicromolar EC₅₀ values and PIs >300 against S. mutans and S. aureus were obtained with visible light. This activity was attenuated with 625 nm red light, but PIs were still near 50. The ligand-localized ³ππ* state contributed by the pyrenyl linker of 5h likely plays a key role in its phototoxic effects toward cancer cells and bacteria.     

Spontaneous S–Si bonding of alkanethiols to Si(111)–H: towards Si–molecule–Si circuits

We report the synthesis of covalently linked self-assembled monolayers (SAMs) on silicon surfaces, using mild conditions, in a way that is compatible with silicon-electronics fabrication technologies. In molecular electronics, SAMs of functional molecules tethered to gold via sulfur linkages dominate, but these devices are not robust in design and not amenable to scalable manufacture. Whereas covalent bonding to silicon has long been recognized as an attractive alternative, only formation processes involving high temperature and/or pressure, strong chemicals, or irradiation are known. To make molecular devices on silicon under mild conditions with properties reminiscent of Au–S ones, we exploit the susceptibility of thiols to oxidation by dissolved O₂, initiating free-radical polymerization mechanisms without causing oxidative damage to the surface. Without thiols present, dissolved O₂ would normally oxidize the silicon and hence reaction conditions such as these have been strenuously avoided in the past. The surface coverage on Si(111)–H is measured to be very high, 75% of a full monolayer, with density-functional theory calculations used to profile spontaneous reaction mechanisms. The impact of the Si–S chemistry in single-molecule electronics is demonstrated using STM-junction approaches by forming Si–hexanedithiol–Si junctions. Si–S contacts result in single-molecule wires that are mechanically stable, with an average lifetime at room temperature of 2.7 s, which is five folds higher than that reported for conventional molecular junctions formed between gold electrodes. The enhanced “ON” lifetime of this single-molecule circuit enables previously inaccessible electrical measurements on single molecules.

Spontaneously formed Si–S bonds enable monolayer and single-molecule Si–molecule–Si circuits.     

Development of novel and sensitive methods for the determination of sulfide in aqueous samples by hydrogen sulfide generation-inductively coupled plasma-atomic emission spectroscopy

Two new, simple and accurate methods for the determination of sulfide (S²⁻) at low levels (μg L⁻¹) in aqueous samples were developed. The generation of hydrogen sulfide (H₂S) took place in a coil where sulfide reacted with hydrochloric acid. The resulting H₂S was then introduced as a vapor into an inductively coupled plasma-atomic emission spectrometer (ICP-AES) and sulfur emission intensity was measured at 180.669 nm. In comparison to when aqueous sulfide was introduced, the introduction of sulfur as H₂S enhanced the sulfur signal emission. By setting a gas separator at the end of the reaction coil, reduced sulfur species in the form of H₂S were removed from the water matrix, thus, interferences could be avoided. Alternatively, the gas separator was replaced by a nebulizer/spray chamber combination to introduce the sample matrix and reagents into the plasma. This methodology allowed the determination of both sulfide and sulfate in aqueous samples. For both methods the linear response was found to range from 5 μg L⁻¹ to 25 mg L⁻¹ of sulfide. Detection limits of 5 μg L⁻¹ and 6 μg L⁻¹ were obtained with and without the gas separator, respectively. These new methods were evaluated by comparison to the standard potentiometric method and were successfully applied to the analysis of reduced sulfur species in environmental waters.     

Simultaneous Determination of Human Serum Albumin and Low-Molecular-Weight Thiols after Derivatization with Monobromobimane

Biothiols are extremely powerful antioxidants that protect cells against the effects of oxidative stress. They are also considered relevant disease biomarkers, specifically risk factors for cardiovascular disease. In this paper, a new procedure for the simultaneous determination of human serum albumin and low-molecular-weight thiols in plasma is described. The method is based on the pre-column derivatization of analytes with a thiol-specific fluorescence labeling reagent, monobromobimane, followed by separation and quantification through reversed-phase high-performance liquid chromatography with fluorescence detection (excitation, 378 nm; emission, 492 nm). Prior to the derivatization step, the oxidized thiols are converted to their reduced forms by reductive cleavage with sodium borohydride. Linearity in the detector response for total thiols was observed in the following ranges: 1.76–30.0 mg mL⁻¹ for human serum albumin, 0.29–5.0 nmol mL⁻¹ for α-lipoic acid, 1.16–35 nmol mL⁻¹ for glutathione, 9.83–450.0 nmol mL⁻¹ for cysteine, 0.55–40.0 nmol mL⁻¹ for homocysteine, 0.34–50.0 nmol mL⁻¹ for N-acetyl-L-cysteine, and 1.45–45.0 nmol mL⁻¹ for cysteinylglycine. Recovery values of 85.16–119.48% were recorded for all the analytes. The developed method is sensitive, repeatable, and linear within the expected ranges of total thiols. The devised procedure can be applied to plasma samples to monitor biochemical processes in various pathophysiological states.     

Catalytic Systems for the H<Subscript>2</Subscript>S Wet Oxidation at room Temperature

The catalytic wet oxidation process is the most attractive process for small-scale hydrogen sulfide (H₂S) removal from natural gas. The catalytic wet oxidation process is anticipated to be cost effective and simple so that it can be used for treating sour gases containing small amounts of H₂S and can be easily operated even in isolated sites. The development of effective catalyst is the key technology in the wet catalytic oxidation of H₂S. The scale of operation for the process has to be flexible so its use will not be limited by the flow rates of the gas to be treated. The heterogeneous catalytic wet oxidation of H₂S has been attempted on activated carbons, but the H₂S removal capacity still shows the low removal efficiency. The catalytic wet oxidation of H₂S was studied over Fe/MgO for an effective removal of H₂S. In order to develop a sulfur removal technology, one has to know what surface species of catalyst are the most active. This article discusses the following systematic studies: (i) the catalytic preparation to disperse Fe metal well on MgO support for enhancing H₂S removal capacity, (ii) the effect of the catalytic morphology on the activity of Fe/MgO for the H₂S wet oxidation, (iii) the influence of precursor and support on the activity of Fe/MgO for catalytic wet oxidation of H₂S to sulfur.     

Probing the electronic and mechanistic roles of the μ4-sulfur atom in a synthetic CuZ model system

Nitrous oxide (N₂O) contributes significantly to ozone layer depletion and is a potent greenhouse agent, motivating interest in the chemical details of biological N₂O fixation by nitrous oxide reductase (N₂OR) during bacterial denitrification. In this study, we report a combined experimental/computational study of a synthetic [4Cu:1S] cluster supported by N-donor ligands that can be considered the closest structural and functional mimic of the Cu_Z catalytic site in N₂OR reported to date. Quantitative N₂ measurements during synthetic N₂O reduction were used to determine reaction stoichiometry, which in turn was used as the basis for density functional theory (DFT) modeling of hypothetical reaction intermediates. The mechanism for N₂O reduction emerging from this computational modeling involves cooperative activation of N₂O across a Cu/S cluster edge. Direct interaction of the μ₄-S ligand with the N₂O substrate during coordination and N–O bond cleavage represents an unconventional mechanistic paradigm to be considered for the chemistry of Cu_Z and related metal–sulfur clusters. Consistent with hypothetical participation of the μ₄-S unit in two-electron reduction of N₂O, Cu K-edge and S K-edge X-ray absorption spectroscopy (XAS) reveal a high degree of participation by the μ₄-S in redox changes, with approximately 21% S 3p contribution to the redox-active molecular orbital in the highly covalent [4Cu:1S] core, compared to approximately 14% Cu 3d contribution per copper. The XAS data included in this study represent the first spectroscopic interrogation of multiple redox levels of a [4Cu:1S] cluster and show high fidelity to the biological Cu_Z site.

Experimental data and computational modeling indicates an active role for the bridging sulfide ligand in a synthetic Cu_Z model.     

Data enhanced Hammett-equation: reaction barriers in chemical space

It is intriguing how the Hammett equation enables control of chemical reactivity throughout chemical space by separating the effect of substituents from chemical process variables, such as reaction mechanism, solvent, or temperature. We generalize Hammett''s original approach to predict potential energies of activation in non aromatic molecular scaffolds with multiple substituents. We use global regression to optimize Hammett parameters ρ and σ in two experimental datasets (rate constants for benzylbromides reacting with thiols and ammonium salt decomposition), as well as in a synthetic dataset consisting of computational activation energies of ∼2400 S_N2 reactions, with various nucleophiles and leaving groups (–H, –F, –Cl, –Br) and functional groups (–H, –NO₂, –CN, –NH₃, –CH₃). Individual substituents contribute additively to molecular σ with a unique regression term, which quantifies the inductive effect. The position dependence of substituents can be modeled by a distance decaying factor for S_N2. Use of the Hammett equation as a base-line model for Δ-machine learning models of the activation energy in chemical space results in substantially improved learning curves reaching low prediction errors for small training sets.

We generalize Hammett''s original approach to predict potential energies of activation in non aromatic molecular scaffolds with multiple substituents.     

A hexanuclear gold carbonyl cluster

The hexanuclear gold carbonyl cluster [PPh₄]₂[Au₆(CF₃)₆Br₂(CO)₂] (4) has been obtained by spontaneous self-assembly of the following independent units: CF₃AuCO (1) and [PPh₄][Br(AuCF₃)₂] (3). The cyclo-Au₆ aggregate 4, in which the components are held together by unassisted, fairly strong aurophilic interactions (Au···Au ∼310 pm), exhibits a cyclohexane-like arrangement with chair conformation. These aurophilic interactions also result in significant ν(CO) lowering: from 2194 cm^–1 in the separate component 1 to 2171 cm^–1 in the mixed aggregate 4. Procedures to prepare the single-bridged dinuclear component 3 as well as the mononuclear derivative [PPh₄][CF₃AuBr] (2) are also reported.     

Biocompatible metal–organic frameworks for the storage and therapeutic delivery of hydrogen sulfide

Hydrogen sulfide (H₂S) is an endogenous gasotransmitter with potential therapeutic value for treating a range of disorders, such as ischemia-reperfusion injury resulting from a myocardial infarction or stroke. However, the medicinal delivery of H₂S is hindered by its corrosive and toxic nature. In addition, small molecule H₂S donors often generate other reactive and sulfur-containing species upon H₂S release, leading to unwanted side effects. Here, we demonstrate that H₂S release from biocompatible porous solids, namely metal–organic frameworks (MOFs), is a promising alternative strategy for H₂S delivery under physiologically relevant conditions. In particular, through gas adsorption measurements and density functional theory calculations we establish that H₂S binds strongly and reversibly within the tetrahedral pockets of the fumaric acid-derived framework MOF-801 and the mesaconic acid-derived framework Zr-mes, as well as the new itaconic acid-derived framework CORN-MOF-2. These features make all three frameworks among the best materials identified to date for the capture, storage, and delivery of H₂S. In addition, these frameworks are non-toxic to HeLa cells and capable of releasing H₂S under aqueous conditions, as confirmed by fluorescence assays. Last, a cellular ischemia-reperfusion injury model using H9c2 rat cardiomyoblast cells corroborates that H₂S-loaded MOF-801 is capable of mitigating hypoxia-reoxygenation injury, likely due to the release of H₂S. Overall, our findings suggest that H₂S-loaded MOFs represent a new family of easily-handled solid sources of H₂S that merit further investigation as therapeutic agents. In addition, our findings add Zr-mes and CORN-MOF-2 to the growing lexicon of biocompatible MOFs suitable for drug delivery.

Metal–organic frameworks enable the delivery of hydrogen sulfide (H₂S), an endogenous gasotransmitter with potential therapeutic value for treating disorders such as ischemia-reperfusion injury.     

De novo design and synthesis of dipyridopurinone derivatives as visible-light photocatalysts in productive guanylation reactions

Described here is the de novo design and synthesis of a series of 6H-dipyrido[1,2-e:2′,1′-i]purin-6-ones (DPs) as a new class of visible-light photoredox catalysts (PCs). The synthesized DP1–5 showed their λ_Abs(max) values in 433–477 nm, excited state redox potentials in 1.15–0.69 eV and −1.41 to −1.77 eV (vs. SCE), respectively. As a representative, DP4 enables the productive guanylation of various amines, including 1°, 2°, and 3°-alkyl primary amines, secondary amines, aryl and heteroaryl amines, amino-nitrile, amino acids and peptides as well as propynylamines and α-amino esters giving diversities in biologically important guanidines and cyclic guanidines. The photocatalytic efficacy of DP4 in the guanylation overmatched commonly used Ir and Ru polypyridyl complexes, and some organic PCs. Other salient merits of this method include broad substrate scope and functional group tolerance, gram-scale synthesis, and versatile late-stage derivatizations that led to a derivative 81 exhibiting 60-fold better anticancer activity against Ramos cells with the IC₅₀ of 0.086 μM than that of clinical drug ibrutinib (5.1 μM).

A novel visible-light photocatalyst was designed and its photocatalytic efficacy in the guanylation of amines overmatched common metal-core and organic photocatalysts.     

Ortho-aryl substituted DPEphos ligands: rhodium complexes featuring C–H anagostic interactions and B–H agostic bonds

The synthesis of new Schrock–Osborn Rh(i) pre-catalysts with ortho-substituted DPEphos ligands, [Rh(DPEphos-R)(NBD)][BAr^F₄] [R = Me, OMe, ⁱPr; Ar^F = 3,5-(CF₃)₂C₆H₃], is described. Along with the previously reported R = H variant, variable temperature ¹H NMR spectroscopic and single-crystal X-ray diffraction studies show that these all have axial (C–H)⋯Rh anagostic interactions relative to the d⁸ pseudo square planar metal centres, that also result in corresponding downfield chemical shifts. Analysis by NBO, QTAIM and NCI methods shows these to be only very weak C–H⋯Rh bonding interactions, the magnitudes of which do not correlate with the observed chemical shifts. Instead, as informed by Scherer''s approach, it is the topological positioning of the C–H bond with regard to the metal centre that is important. For [Rh(DPEphos–ⁱPr)(NBD)][BAr^F₄] addition of H₂ results in a Rh(iii) ⁱPr–C–H activated product, [Rh(κ³,σ-P,O,P-DPEphos-ⁱPr′)(H)][BAr^F₄]. This undergoes H/D exchange with D₂ at the ⁱPr groups, reacts with CO or NBD to return Rh(i) products, and reaction with H₃B·NMe₃/tert-butylethene results in a dehydrogenative borylation to form a complex that shows both a non-classical B–H⋯Rh 3c-2e agostic bond and a C–H⋯Rh anagostic interaction at the same metal centre.

Rh(i) complexes of ortho-substituted DPEphos-R (R = H, Me, OMe, ⁱPr) ligands show anagostic interactions; for R =ⁱPr C–H activation/dehydrogenative borylation forms a product exhibiting both B–H/Rh 3c-2e agostic and C–H/Rh anagostic motifs.