Influence of inorganic scalants and natural organic matter on nanofiltration membrane fouling

The influence of inorganic scalants and NOM on nanofiltration (NF) membrane fouling was investigated by a crossflow bench-scale test cell. Mathematical fouling models were used to determine kinetics and fouling mechanisms of NF membrane. It was observed that, with natural organic matter (NOM) at a concentration of 10 mg L⁻¹, divalent cation, i.e. calcium (Ca²⁺), exhibited greater flux decline than monovalent cation, i.e. sodium (Na⁺), while solution flux curves dominated cake formation model, especially at high ionic strength. For inorganic scalants of polyanions, i.e. carbonate (CO₃²⁻), sulphate (SO₄²⁻), and phosphate (PO₄³⁻), solution flux curves were relatively fitted well with pore blocking model, possibly due to precipitated species formed and blocked on membrane surface and/or pores. For different divalent cations (i.e. calcium and magnesium (Mg²⁺)), calcium showed greater flux decline than magnesium, possibly due to higher concentration of precipitated calcium species than that of precipitated magnesium species based on the pC (−log concentration) and pH diagram.     

Cationic and anionic environments in LiTFSI-doped di-ureasils with application in solid-state electrochromic devices

Fourier Transform mid-infrared and Raman spectroscopies were used to investigate the cation/polymer, cation/urea bridge, cation/anion and hydrogen bonding interactions in poly(oxyethylene) (POE)/siloxane di-ureasil networks prepared by the sol–gel route and doped with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Materials with compositions 200 ?n ? 5 (where n expresses the molar ratio OCH₂CH₂/Li⁺) were studied. The Li⁺ ions coordinate to the urea carbonyl oxygen atoms over the whole range of salt concentration considered. Bonding to the ether oxygen atoms of the POE chains occurs at n ? 40, although a significant fraction of the POE chains remain non-coordinated. In these high salt content samples, the cations interact with the anions forming contact ion pairs. “Free” ions are probably the main charge carriers at the room temperature conductivity maximum of these ormolytes.     

Systematic investigation on new SrCo1−yNbyO3−δ ceramic membranes with high oxygen semi-permeability

SrCo_1−yNb_yO_3−δ (y = 0.025–0.4) were synthesized for oxygen separation application. The crystal structure, phase stability, oxygen nonstoichiometry, electrical conductivity, and oxygen permeability of the oxides were systematically investigated. Cubic perovskite, with enhanced phase stability at higher Nb concentration, was obtained at y = 0.025–0.2. However, the further increase in niobium concentration led to the formation of impurity phase. The niobium doping concentration also had a significant effect on electrical conductivity and oxygen permeability of the membranes. SrCo_0.9Nb_0.1O_3−δ exhibited the highest electrical conductivity and oxygen permeability among the others. It reached a permeation flux of ∼2.80 × 10⁻⁶ mol cm⁻² s⁻¹ at 900 °C for a 1.0-mm membrane under an air/helium oxygen gradient. The further investigation demonstrated the oxygen permeation process was mainly rate-limited by the oxygen bulk diffusion process.     

Dextran-grafted cation exchanger based on superporous agarose gel: Adsorption isotherms,uptake kinetics and dynamic protein adsorption performance

A novel chromatographic medium for high-capacity protein adsorption was fabricated by grafting dextran (40 kDa) onto the pore surfaces of superporous agarose (SA) beads. The bead was denoted as D-SA. D-SA, SA and homogeneous agarose (HA) beads were modified with sulfopropyl (SP) group to prepare cation exchangers, and the adsorption and uptake of lysozyme on all three cation-exchange chromatographic beads (SP-HA, SP-SA and SP-D-SA) were investigated at salt concentrations of 6–50 mmol/L. Static adsorption experiments showed that the adsorption capacity of SP-D-SA (2.24 mmol/g) was 78% higher than that of SP-SA (1.26 mmol/g) and 54% higher than that of SP-HA (1.45 mmol/g) at a salt concentration of 6 mmol/L. Moreover, salt concentration had less influence on the adsorption capacity and dissociation constant of SP-D-SA than it did on SP-HA, suggesting that dextran-grafted superporous bead is a more potent architecture for chromatographic beads. In the dynamic uptake of lysozyme to the three cation-exchange beads, the D_e/D₀ (the ratio of effective pore diffusivity to free solution diffusivity) values of 1.6–2.0 were obtained in SA-D-SA, indicating that effective pore diffusivities of SP-D-SA were about two times higher than free solution diffusivity for lysozyme. At 6 mmol/L NaCl, the D_e value in SA-D-SA (22.0 × 10⁻¹¹ m²/s) was 14.4-fold greater than that in SP-HA. Due to the superior uptake kinetics in SA-D-SA, the highest dynamic binding capacity (DBC) and adsorption efficiency (the ratio of DBC to static adsorption capacity) was likewise found in SP-D-SA. It is thus confirmed that SP-D-SA has combined the advantages of superporous matrix structure and drafted ligand chemistry in mass transport and offers a new opportunity for the development of high-performance protein chromatography.     

Effects of nanoparticles on the ultrafiltration of surface water

The effects of nanoparticles on the fouling behavior of UF membranes were investigated by filtering river water containing natural organic matter (NOM). Self-dispersible carbon black (70–200 nm) was employed to model nanoparticles in natural water. The presence of nanoparticles transformed the mode of initial fouling from internal pore adsorption of NOM to intermediate pore blocking, which caused a significant flux reduction. The use of powdered activated carbon to adsorb organic micromolecules reduced internal pore fouling, but this effect on initial fouling mode did not much mitigate the overall flux decline. As filtration proceeded, cake filtration became the dominant fouling mode. The resistance-in-series model revealed that boundary-layer resistance contributed significantly to increased filtration resistance in the filtration of river water. The nanoparticles nullified boundary-layer resistance plausibly by removing organic macromolecules from river water, but aggravated cake resistance, which required chemical cleaning. Addition of calcium significantly increased the aggregate size of nanoparticles from 0.18–0.35 μm to 3.4 μm, and thus reduced pore blocking and total cake resistance.     

Trilinearity deviation ratio: A new metric for chemometric analysis of comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry data

Comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (GC × GC–TOFMS) is a well-established instrumental platform for complex samples. However, chemometric data analysis is often required to fully extract useful information from the data. We demonstrate that retention time shifting from one modulation to the next, Δ²t_R, is not sufficient alone to quantitatively describe the trilinearity of a single GC × GC–TOFMS run for the purpose of predicting the performance of the chemometric method parallel factor analysis (PARAFAC). We hypothesize that analyte peak width on second dimension separations, ²W_b, also impacts trilinearity, along with Δ²t_R. The term trilinearity deviation ratio, TDR, which is Δ²t_R normalized by ²W_b, is introduced as a quantitative metric to assess accuracy for PARAFAC of a GC × GC–TOFMS data cube. We explore how modulation ratio, M_R, modulation period, P_M, temperature programming rate, T_ramp, sampling phase (in-phase and out-of-phase), and signal-to-noise ratio, S/N, all play a role in PARAFAC performance in the context of TDR. Use of a P_M in the 1–2 s range provides an optimized peak capacity for the first dimension separation (500–600) for a 30 min run, with an adequate peak capacity for the second dimension separation (12–15), concurrent with an optimized two-dimensional peak capacity (6000–7500), combined with sufficiently low TDR values (0–0.05) to facilitate low quantitative errors with PARAFAC (0–0.5%). In contrast, use of a P_M in the 5 s or greater range provides a higher peak capacity on the second dimension (30–35), concurrent with a lower peak capacity on the first dimension (100–150) for a 30 min run, and a slightly reduced two-dimensional peak capacity (3000–4500), and furthermore, the data are not sufficiently trilinear for the more retained second dimension peaks in order to directly use PARAFAC with confidence.     

The first heterometallic Cu(II)/Cr(III) complex with an open-chain Schiff-base ligand self-assembled from copper powder,Reineckes salt,ethylendiamine and acetone

A novel supramolecular assembly [{Cu(enac)}₂Cr(NCS)₄(NH₃)₂][Cr(NCS)₄(NH₃)₂]₃ · 4(CH₃)₂CO (enac = 4,6,6-trimethyl-3,7-diazanon-3-ene-1,9-diamine), the first example of a Cu/Cr heterometallic compound containing a Schiff-base ligand such as enac, and an anion of Reineckes salt, Cr(NCS)₄(NH₃)₂⁻, as a building block, was obtained by the self-assembly reaction of copper powder and Reineckes salt in an acetone/methanol (1:4) solution of ethylenediamine in the open air. An X-ray study shows that the complex includes a trinuclear Cu₂Cr cation, constructed from two Cu(enac)²⁺ moieties and a trans-[Cr(NCS)₄(NH₃)₂]⁻ block as a two-linking bridging ligand. The metal–metal separations within the cation are Cu?Cr = 6.393(31) Å and Cu?Cu = 12.786(63) Å. The supramolecular architecture of the complex involves two types of H-bonded chains, the first chain is generated by trinuclear cations [{Cu(enac)}₂Cr(NCS)₄(NH₃)₂]²⁺, [Cr(NCS)₄(NH₃)₂]⁻ anions and (CH₃)₂CO molecules, while the second by crystallographically different anions of Reineckes salt and (CH₃)₂CO. Variable-temperature (1.8–300 K) magnetic susceptibilities show a slight change of the μ_B value at low temperature, indicative of weak antiferromagnetic interactions (J_CuCr = −0.9 cm⁻¹) between the paramagnetic centers.     

Development of fast enantioselective gas-chromatographic analysis using gas-chromatographic method-translation software in routine essential oil analysis (lavender essential oil)

The study aimed to find the best trade-off between separation of the most critical peak pair and analysis time, in enantioselective GC–FID and GC–MS analysis of lavender essential oil, using the GC method-translation approach. Analysis conditions were first optimized for conventional 25 m × 0.25 mm inner diameter (d_c) column coated with 6^I–VII-O-tert-butyldimethylsilyl-2^I–VII-3^I–VII-O-ethyl-β-cyclodextrin (CD) as chiral stationary phase (CSP) diluted at 30% in PS086 (polymethylphenylpolysiloxane, 15% phenyl), starting from routine analysis. The optimal multi-rate temperature program for a pre-set column pressure was determined and then used to find the pressures producing the efficiency-optimized flow (EOF) and speed-optimized flow (SOF). This method was transferred to a shorter narrow-bore (NB) column (11 m × 0.10 mm) using method-translation software, keeping peak elution order and separation. Optimization of the enantioselective GC method with the translation approach markedly reduced the analysis time of the lavender essential oil, from about 87 min with the routine method to 40 min with an optimal multi-rate temperature program and initial flow with a conventional inner diameter column, and to 15 min with FID as detector or 13.5 min with MS with a corresponding narrow-bore column, while keeping enantiomer separation and efficiency.     

Stereoselective synthesis of cobalt(III) anionic complexes with chiral pyruvylaminoacid oximes and metal–ligand interactions in aqueous solution

A series of cobalt(III) anionic complexes with hydroxyimino analogs of dipeptides – oximes of pyruvylglycine, pyruvyl-l-alanine, pyruvyl-l-methionine and pyruvyl-l-phenylalanine (H₂pamaco, amac = amino acid) of composition Cat₃[Co(H₋₁pamaco)₂] · nH₂O (Cat – a monovalent metal cation) has been synthesized and investigated by UV–Vis, CD and ¹H NMR spectroscopy. It was established that for the two latter ligands, non-racemic mixtures of two diastereomeric complexes were formed as a result of synthesis. In comparison with the complex containing pyruvyl-l-alanine, in which the relative content of R (C₂) and S (C₂) isomers is approximately equal, the presence of bulky substituents in the molecules of Met- and Phe-containing ligands results in a significant discrimination in formation of the S (C₂) isomer. This conclusion was drawn upon analysis of the CD and NMR spectral data as well as from molecular modeling. The relative content of the diastereomers was evaluated on the basis of NMR data. The protonation constants of the ligands have been determined in aqueous solution by glass electrode potentiometry, whereas their interactions with Co(II) were studied both under argon and oxygen atmosphere.     

Metal complexes stability constant determination by hyphenation of capillary electrophoresis with inductively coupled plasma mass spectrometry: The case of 1:1 metal-to-ligand stoichiometry

Nuclear energy development has raised new issues like radionuclides biogeochemistry. The modelling of their biochemical properties involves the accurate determination of thermodynamical data, like stability constants. This can be achieved by using hyphenated capillary electrophoresis (CE)–ICPMS and the method was applied successfully on 1:1 lanthanum–oxalate and uranyl–oxalate complexes. Several significant steps are discussed: choice of analytical conditions, electrophoretic mobility calculation, mathematical treatment of experimental data by using linear regressions, ligand concentration and ionic strength corrections. The following values were obtained with a good precision for lanthanum–oxalate and uranyl–oxalate complexes: log(K°(LaOxa⁺)) = 6.10 ± 0.10 and log(K°(UO₂Oxa)) = 6.40 ± 0.30, respectively, at infinite dilution. These values are consistent with the literature data, showing CE–ICPMS potential for metal complexes stability constants determination.     

Application of capillary affinity electrophoresis and density functional theory to the investigation of valinomycin–lithium complex

Capillary affinity electrophoresis (CAE) and quantum mechanical density functional theory (DFT) have been applied to the investigation of interactions of valinomycin (Val), a macrocyclic dodecadepsipeptide antibiotic ionophore, with lithium cation Li⁺. Firstly, from the dependence of effective electrophoretic mobility of Val on the Li⁺ ion concentration in the background electrolyte (BGE) (methanolic solution of 50 mM chloroacetic acid, 25 mM Tris, pH_MeOH 7.8, 0–40 mM LiCl), the apparent binding (stability) constant (K_b) of Val–Li⁺ complex in methanol was evaluated as log K_b = 1.50 ± 0.24. The employed CAE method include correction of the effective mobilities measured at ambient temperature, at different input power (Joule heating) and at variable ionic strength of the BGEs to the mobilities related to the reference temperature 25 °C and to the constant ionic strength 25 mM. Secondly, using DFT calculations, the most probable structures of the non-hydrated Val–Li⁺ and hydrated Val–Li⁺·3H₂O complex species were predicted.     

Study on superabsorbent composite XVI. Synthesis, characterization and swelling behaviors of poly(sodium acrylate)/vermiculite superabsorbent composites

A series of superabsorbent composites were synthesized by copolymerization reaction of partially neutralized acrylic acid on unexpanded vermiculite (UVMT) micropowder using N,N′-methylenebisacrylamide (MBA) as a crosslinker and ammonium persulfate (APS) as an initiator in aqueous solution. And the samples were further characterized by means of fourier-transform spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). The effects of vermiculite content on water absorbency were studied. Swelling behaviors of the superabsorbent composites in various cationic salt solutions (NaCl, CaCl₂ and FeCl₃), anionic salt solutions (NaCl, Na₂SO₄ and Na₃PO₄) and pH solutions were also systematically investigated. Results obtained showed that the equilibrium water absorbency increased with increasing UVMT content and the concentration of 20 wt.% clay gave the best absorption (1232 g/g in distilled water and 89 g/g in 0.9 wt.% NaCl). Data achieved also suggested that the water absorbency in various saline solutions decreased with an increase in the ionic strengths of these solutions. And it was found that at a higher ionic strength (>1 × 10⁻³ M), the water absorbency in monovalent cationic solutions was higher than those in multivalent cationic solutions. However, at the same ionic strength (>1 × 10⁻³ M), the effect of three anionic salt solutions on the swelling has the following order: NaCl < Na₂SO₄ < Na₃PO₄.     

Solid-phase room-temperature decomposition of a complex salt trans-[Rh(γ-Pic)4Cl2]MnO4

Permanganate salt of the complex cation trans-[Rh(γ-Pic)₄Cl₂]⁺ (γ-Pic = γ-picoline) was synthesized. The unusual decomposition reaction of the salt was studied at room temperature. This process has been found to conserve the γ-picoline ligands in cation untouched. A number of transformations in anionic part of salt have been observed. Metallic products of the salt thermal decomposition have been studied.     

Preparation of cobalt-tetraphenylporphyrin/reduced graphene oxide nanocomposite and its application on hydrogen peroxide biosensor

A novel cobalt-tetraphenylporphyrin/reduced graphene oxide (CoTPP/RGO) nanocomposite was prepared by a π–π stacking interaction and characterized by ultraviolet–visible absorption spectroscopy (UV–vis), Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopy (EIS). The CoTPP/RGO nanocomposite exhibited high electrocatalytic activity both for oxidation and reduction of H₂O₂. The current response was linear to H₂O₂ concentration with the concentration range from 1.0 × 10⁻⁷ to 2.4 × 10⁻³ mol L⁻¹ (R = 0.998) at the reductive potential of −0.20 V and from 1.0 × 10⁻⁷ to 4.6 × 10⁻⁴ mol L⁻¹ (R = 0.996) at the oxidative potential of +0.50 V. The H₂O₂ biosensor showed good anti-interfering ability towards oxidative interferences at the oxidative potential of +0.50 V and good anti-interfering ability towards reductive interferences at the reductive potential of −0.20 V.     

A method for rapid screening of interactions of pharmacologically active compounds with albumin

We determine the association constants for ligand–protein complex formation using the flow injection method. We carry out the measurements at high flow rates (F = 1 mL min⁻¹) of a carrier phase. Therefore, determination of the association constant takes only a few minutes. Injection of 1 nM of the ligand (10 μL of 1 μM concentration of the ligand solution) is sufficient for a single measurement. This method is tested and verified for a number of complexes of selected drugs (cefaclor, etodolac, sulindac) with albumin (BSA). We obtain K = 4.45 × 10³ M⁻¹ for cefaclor, K = 1.00 × 10⁵ M⁻¹ for etodolac and K = 1.03 × 10⁵ M⁻¹ for sulindac in agreement with the literature data. We also determine the association constants of 20 newly synthesized 3β- and 3α-aminotropane derivatives with potential antipsychotic activity – ligands of 5-HT_1A, 5-HT_2A and D₂ receptors with the albumin. Results of the studies reported here indicate that potential antipsychotic drugs bind weakly to the transporter protein (BSA) with K ≈ 10²–10³ M⁻¹. Our method allows measuring K in a wide range of values (10²–10⁹ M⁻¹). This range depends only on the solubility of the ligand and sensitivity of the detector.     

Highly phosphonated polypentafluorostyrene: Characterization and blends with polybenzimidazole

In this study we present results of the conductivity and resistance to thermooxidative and condensation reactions of a highly phosphonated poly(pentafluorostyrene) (PWN2010) and of its blends with poly(benzimidazole)s (PBI). This polymer, which combines both: (i) a high degree of phosphonation (above 90%) and (ii) a relatively high acidity (pK_a (–PO₃H₂ ↔ –PO₃H⁻) ∼ 0.5) due to the fluorine neighbors, is designed for low humidity operating fuel cell. This was confirmed by the conductivity measurements for PWN2010 reaching σ = 5 × 10⁻⁴ S cm⁻¹ at 150 °C in dry N₂ and σ = 1 × 10⁻³ S cm⁻¹ at 150 °C (λ = 0.75). Furthermore, this polymer showed only 48% of anhydride formation when annealing it at T = 250 °C for 5 h and only 2% weight loss during a 96 h Fenton test. These properties combined with the ability of the PWN2010 to form homogeneous blends with polybenzimidazoles resulting in stable and flexible polymer films, makes PWN2010 a very promising candidate as a polymer electrolyte for intermediate- and high-temperature fuel cell applications.     

Thin Pd–23%Ag/stainless steel composite membranes: Long-term stability,life-time estimation and post-process characterisation

The long-term stability of Pd–23%Ag/stainless steel composite membranes has been examined in H₂/N₂ mixtures as a function of both temperature and feed pressure. During continuous operation, the membrane shows a good stability at 400 °C while the N₂ leakage increases very slowly at a temperature of 450 °C (P_feed = 10 bar). After 100 days of operation (P_feed = 5–20 bar, T = 350–450 °C), the N₂ permeance equals 7.0 × 10⁻⁹ mol m⁻² s⁻¹ Pa⁻¹, which indicates that the H₂/N₂ permselectivity still lies around 500, based on a H₂ permeance equal to 3.0 × 10⁻⁶ mol m⁻² s⁻¹ Pa⁻¹. Despite the generation of small pinholes, a membrane life-time of several (2–3) years (T ≤ 425 °C) is estimated for the experimental conditions employed based on long-term stability tests over 100 days. Post-process characterisation shows a considerable grain growth and micro-strain relaxation in the Pd–23%Ag membrane after the prolonged permeation experiment. Changes in surface area are relatively small. In addition, segregation of Ag to the membrane surfaces is observed. The formation of pinholes is identified as the main source for the increased N₂ leakage during testing at higher temperature.     

Ionic liquids as porogens in the microwave-assisted synthesis of methacrylate monoliths for chromatographic application

Several imidazolium-based ionic liquids (ILs) with varying cation alkyl chain length (C₄–C₁₀) and anion type (tetrafluoroborate ([BF₄]⁻), hexafluorophosphate ([PF₆]⁻) and bis(trifluoromethylsulfonyl)imide ([Tf₂N]⁻)) were used as reaction media in the microwave polymerization of methacrylate-based stationary phases. Scanning electron micrographs and backpressures of poly(butyl methacrylate-ethylene dimethacrylate) (poly(BMA-EDMA)) monoliths synthesized in the presence of these ionic liquids demonstrated that porosity and permeability decreased when cation alkyl chain length and anion hydrophobicity were increased. Performance of these monoliths was assessed for their ability to separate parabens by capillary electrochromatography (CEC). Intra-batch precision (n = 3 columns) for retention time and peak area ranged was 0.80–1.13% and 3.71–4.58%, respectively. In addition, a good repeatability of RSD_{Retention time} = <0.30% and ∼1.0%, RSD_{Peak area} = <1.30% and <4.3%, and RSD_Efficiency = <0.6% and <11.5% for intra-day and inter-day, respectively exemplify monolith performance reliability for poly(BMA-EDMA) fabricated using 1-hexyl-3-methylimidazolium tetrafluoroborate ([C₆mim][BF₄]) porogen. This monolith was also tested for its potential in nanoLC to separate protein digests in gradient mode. ILs as porogens also fabricated different alkyl methacrylate (AMA) (C4–C18) monoliths. Furthermore, employing binary IL porogen mixture such as 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim][BF₄]) and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₄mim][Tf₂N]) successfully decreased the denseness of the monolith, than when using [C₄mim][Tf₂N] IL alone, enabling a chromatographic run to be performed with 1:1 ratio produced baseline separation for the analytes. The combination of ILs and microwave irradiation made polymer synthesis very fast (∼10 min), entirely green (organic solvent-free) and energy saving process.     

Pre-concentration of phenolic compounds in water samples by novel liquid–liquid microextraction and determination by gas chromatography–mass spectrometry

Pre-concentration and determination of 8 phenolic compounds in water samples has been achieved by in situ derivatization and using a new liquid–liquid microextraction coupled GC–MS system. Microextraction efficiency factors have been investigated and optimized: 9 μL 1-undecanol microdrop exposed for 15 min floated on surface of a 10 mL water sample at 55 °C, stirred at 1200 rpm, low pH level and saturated salt conditions. Chromatographic problems associated with free phenols have been overcome by simultaneous in situ derivatization utilizing 40 μL of acetic anhydride and 0.5% (w/v) K₂CO₃. Under the selected conditions, pre-concentration factor of 235–1174, limit of detection of 0.005–0.68 μg/L (S/N = 3) and linearity range of 0.02–300 μg/L have been obtained. A reasonable repeatability (RSD ≤ 10.4%, n = 5) with satisfactory linearity (0.9995 ≥ r² ≥ 0.9975) of results illustrated a good performance of the present method. The relative recovery of different natural water samples was higher than 84%.     

A study on interaction of Be, Mg and Ca with phenylalanine: Binding energies, metal ion affinities and IR signature of complex stability

The interaction between divalent metal cations and amino acids plays an important role in many biological processes. In present report, we have examined the effect of metal cations (Be⁺⁺, Mg⁺⁺ and Ca⁺⁺) interaction on structures, binding energies (BE), metal ion affinities (MIA) and infrared (IR) spectra of phenylalanine (Phe) molecule by density functional theory (DFT) calculations at B3LYP/6-311++G(d,p) level. Nine different ground state isomers of Phe molecule have been optimized at B3LYP/6-311++G (d,p) level of theory. The relative ground state energies of these nine isomers are lying between 0.0-1.9 kcal/mol with respect to the ground state energy of most stable Phe isomer. Seven most stable complexes of Phe molecule with Be⁺⁺, Mg⁺⁺ and Ca⁺⁺ [Phe+M]⁺⁺ (M = Be⁺⁺, Mg⁺⁺ and Ca⁺⁺) were studied. The calculated values of metal ion affinity (MIA), BE and the Gibbs free energies of each [Phe+M] ⁺⁺ complexes were found to be in the order of Be⁺⁺ > Mg⁺⁺ > Ca⁺⁺. Among the seven [Phe+M]⁺⁺ complexes, the most stable conformer has charge solvation structure where the metal cations coordinated through tridentate bonds with -N, -O atoms and benzene ring (N/O/Ring). The [Phe+Be]⁺⁺ complex has maximum MIA value, 353.3 kcal/mol than that of [Phe+Mg]⁺⁺ and [Phe + Ca]⁺⁺ complexes. Thus, the complex [Phe+Be]⁺⁺ is energetically more stable than that of [Phe+Mg]⁺⁺ and [Phe + Ca]⁺⁺. The IR spectra of each seven conformers of [Phe+M]⁺⁺ complexes have been also calculated. The wavnumber position of (-CO) stretching mode was used to determine the charge/salt bridge structures of the [Phe+M]⁺⁺ complex. The most stable [Phe+M]⁺⁺ complex has been also verified through the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) analysis.