Mechanism of 1,3-dipolar cycloaddition reactions of indan-1-one enamines with aryl nitrile oxide: a DFT analysis

The mechanism (regioselectivity) of [3+2] cycloaddition reaction of indan-1-one enamines (1ad–1ce) with aryl nitrile oxide (2) has been investigated by density functional theory-based reactivity indices and activation energy calculations at B3LYP/6-31G(d) level of theory in the gas phase. Thermodynamic and kinetic parameters of the possible 3-regio/4-regio regioisomeric pathways have been determined. In all cases, the 3-regio pathways are more favorable compared to the 4-regio alternatives. Our results show that these cycloadditions follow an asynchronous one-step mechanism with a nonpolar character. Theoretical data are in good agreement with the experimental results.     

Photocrosslinkable polynorbornene-based block copolymers with enhanced dielectric and thermal properties

Block copolymers poly(endo-N-3,5-bis(trifluoromethyl)biphenyl-norbornene-pyrrolidine)-block-poly(exo-N-(cinnamoyloxyethyl)-7-oxanorborn-5-ene-2,3-dicarboximide) (endo-PTNP-b-exo-PCONBI) and poly(exo-N-3,5-bis(trifluoromethyl)biphenyl-norbornene-pyrrolidine)-block-poly(exo-N-(cinnamoyloxyethyl)-7-oxanorborn-5-ene-2,3-dicarboximide) (exo-PTNP-b-exo-PCONBI) were synthesized by ring-opening metathesis polymerization. The endo- or exo-PTNP served as the high dielectric functional chain, and exo-PCONBI acted as the crosslinking segment. The endo-PTNP-b-exo-PCONBI, in which endo-PTNP has a high content of trans double bond and adopts isotactic configuration, shows a dielectric constant (ε) of 15.5, whereas exo-PTNP-b-exo-PCONBI, in which exo-PTNP has 67% trans double bonds and atactic microstructure, displays relatively low ε of 7.1. The cinnamate groups in exo-PCONBI were crosslinked to form three-dimensional network by cycloaddition reaction under UV irradiation. Exposed to UV-light for 10 min, the cinnamate group in polymer films has a crosslinking conversion of 36%, as determined by UV-Vis absorption measurements. By photocrosslinking, the polymer film has an increased ε of 16.6, a dielectric loss of 0.03, an elevated glass-transition temperature of 137 °C, and an enhanced decomposition temperature of 405 °C, compared to those of polymer films without irradiation.     

1,3-Dipolar Cycloaddition of Difluoro-Substituted Azomethine Ylides. Synthesis and Transformations of 2-Fluoro-4,5-dihydropyrroles

2-Fluoro-4,5-dihydropyrrole-3,4-dicarboxylic acid derivatives were obtained by reaction of difluorocarbene with N-substituted ketone imines in the presence of fumaronitrile, maleonitrile, or dimethyl maleate. The reaction involves intermediate formation of azomethine ylides and their subsequent cycloaddition at the double bond. 11H-Dibenz[b,e]azepine and 3,4-dihydroisoquinolines react with difluorocarbene in the presence of fumaronitrile to give fluoro-substituted dibenzo[c,f]pyrrolo[1,2-a]azepine and pyrrolo[2,1-a]-isoquinoline derivatives. Treatment of 2-fluoro-4,5-dihydropyrrole-3,4-dicarbonitrile with amines and alkoxides affords the corresponding 2-amino- and 2-alkoxy derivatives, while its reactions with hydrazine hydrate and benzimidamide lead to formation of substituted pyrrolo[2,3-c]pyrazole and pyrrolo[2,3-d]-pyrimidine derivatives.     

Concerted cycloaddition reactions: a study using the parabolic model and quantum chemical modeling

Concerted cycloaddition reactions were studied by the method of intersecting parabolas (M3IP) and quantum chemical calculations. Experimental data were processed within the framework of the M3IP method and an algorithm for calculating the activation energies (E) and rate constants (k) for reactions from the enthalpies of reactions was developed. The parameters E and k for twelve cycloaddition reactions not studied previously were calculated. Factors affecting the activation energies were established and evaluated; these include the enthalpy of reaction, substituents, and the molecular structure of reactants. Quantum chemical modeling and topological analysis of transition states (TS) of six concerted cycloaddition reactions were performed. Depending on structure of the starting olefins, the TS of reactions can have either a symmetric or asymmetric geometry. This influences their electronic structures, the energies of chemical bonds, and the activation energies of reactions. A comparison of the activation energy values obtained from the M3IP and DFT(B3lyp/6-311++G** ) calculations revealed good agreement between them.     

Electrophilic heterocyclization of 6-alken(yn)ylsulfanyl-pyrazolo[3,4-<Emphasis Type="Italic">d</Emphasis>]pyrimidin-4(5<Emphasis Type="Italic">H</Emphasis>)-ones

6-Allylsulfanyl-1-arylpyrazolo[3,4-d]pyrimidin-4(5H)-ones react with iodine and sulfuric acid to give angular pyrazolothiazolopyrimidine derivatives. The reaction of 6-(prop-2-yn-1-ylsulfanyl)-1-(4-tolyl)-pyrazolo[3,4-d]pyrimidin-4(5H)-one with sulfuric acid gives angularly fused pyrazolo[4,3-e][1,3]thiazolo-[3,2-a]pyrimidin-4-one, whereas in the reaction with sodium methoxide linearly fused pyrazolo[3,4-d][1,3]-thiazolo[3,2-a]pyrimidin-4-one was formed. Linearly fused pyrazolo[3′,4′:4,5]pyrimido[2,1-b][1,3]thiazole derivatives were also obtained by reaction of 1-aryl-6-(3-phenylprop-2-en-1-ylsulfanyl)pyrazolo[3,4-d]pyrimidin-4(5H)-ones with sulfuric acid.     

Hyperconjugative interactions are the main responsible for the anomeric effect: a direct relationship between the hyperconjugative anomeric effect,global hardness and zero-point energy

The correlations between the global hardness (η), hyperconjugative anomeric effect, Pauli exchange-type repulsions, electrostatic model associated with dipole–dipole interaction and structural parameters in 2-fluorotetrahydropyran, -thiopyran, -selenopyran (1–3) and their chloro- (4–6) and bromo-analogs (7–9) were investigated by means of the conventional and range-corrected functionals and natural bond orbital (NBO) interpretation. By deletion of the HC-exo-AE and HC-endo-AE, the equatorial conformations of compounds 1–9 become more stable than their corresponding axial forms, revealing that anomeric relationships in compounds 1–9 have the hyperconjugative anomeric effect origins while the electrostatic model associated with dipole–dipole interaction does not play a determining role on the variations of the anomeric relationships in these compounds. The anomeric relationships in compounds 1–3 have no Pauli exchange-type repulsions origin, but it has a significant impact on the conformational preferences in compounds 4–6 and 7–9. A canonical molecular orbital interpretation was conducted to investigate the correlations between the linear combinations of natural bond orbitals in the HOMOs, LUMOs and the global hardness (η) values. There is a direct relationship between the hyperconjugative anomeric effect, global hardness (η) and zero-point energies in compounds 1–3, 4–6 and 7–9. The harder axial conformations with the greater hyperconjugative anomeric effect and zero-point energy values are more stable than their corresponding equatorial forms.     

Glycosylation of panaxadiol

Glycosylation of 3β,12β-dihydroxy-20R,25-epoxydammarane (panaxadiol) (1) under Koenigs–Knorr, Helferich, and ortho-ester reaction conditions was studied. Condensation of panaxadiol and 2,3,4,6-tetra-O-acetyl-α-D-glucopyranosylbromide (2) in the presence of silver oxide and 4-Å molecular sieves in dichloroethane gave a mixture of acetylated panaxadiol 3- and 12-O-β-D-glucopyranosides (3:1 ratio). Reaction of diol 1 and D-glucose tert-butylorthoacetate (3) in the presence of 2,4,6-collidinium perchlorate in chlorobenzene resulted in regioselective formation of panaxadiol 12-O-β-D-glucopyranoside tetraacetate. Reaction of equimolar amounts of 1 and glycosyl donor 2 in the presence of Hg(II) cyanide in nitromethane at 90°C was accompanied by opening of the tetrahydropyran ring and gave 3β,12β,25-trihydroxydammar20(22)E-ene 12-O-β-D-glucopyranoside tetraacetate. Panaxadiol 3- and 12-O-β-D-glucopyranosides and 3β,12β,25-trihydroxydammar-20(22)E-ene 12-O-β-D-glucopyranoside tetraacetate were synthesized for the first time.     

Synthesis of 1-(1,3-dialkyl-2-oxo-2,3-dihydro-1<Emphasis Type="Italic">H</Emphasis>-imidazo-[4,5-<Emphasis Type="Italic">b</Emphasis>]pyridin-5-yl)-5-oxopyrrolidine-3-carboxylic acids

Nitration of 2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-one gave its 5-nitro derivative which was subjected to alkylation with dimethyl sulfate, diethyl sulfate, and benzyl(dimethyl)phenylammonium chloride. The resulting 1,3-dimethyl-, 1,3-diethyl-, and 1,3-dibenzyl-5-nitro-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-ones were reduced to the corresponding 1,3-dialkyl-5-amino-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-ones, and the latter reacted with itaconic acid to produce 1-(1,3-dialkyl-2-oxo-2,3-dihydro-1H-imidazo[4,5-b]pyridin-5-yl)-5-oxopyrrolidine-3-carboxylic acids. 1-(2-Oxo-2,3-dihydro-1H-imidazo[4,5-b]pyridin-5-yl)-5-oxopyrrolidine-3-carboxylic acid was obtained by analogous reaction with 5-amino-2,3-dihydro-1H-imidazo[4,5-b]-pyridin-2-one.     

Cycloaminomethylation of dihydric phenols catalyzed by <Emphasis Type="Italic">d</Emphasis>- and <Emphasis Type="Italic">f</Emphasis>-metal compounds

An efficient method has been developed for the synthesis of 7,16,25-triaryl-7,8,16,17,25,26-hexahydro-6H,15H,24H-tribenzo[f,m,t][1,5,8,12,15,19,3,10,17]hexaoxatriazacyclohenicosines, 3,8-diaryl-2,3,4,7,8,9-hexahydrobenzo[1,2-e:4,3-e′]bis[1,3]oxazines, 3,9-bis(chlorophenyl)-3,4,9,10-tetrahydro-2H,8H-benzo[1,2-e:3,4-e′]bis[1,3]oxazines, and 2,9-bis(chlorophenyl)-1,2,3,8,9,10-hexahydrobenzo[1,2-e:6,5-e′]bis-[1,3]oxazines via cycloaminomethylation of pyrocatechol, resorcinol, and hydroquinone with N,N-bis(methoxymethyl) anilines in the presence of samarium catalysts.     

Understanding the regio- and chemoselective polar [3+2] cycloaddition of the Padwa carbonyl ylides with α-methylene ketones. A DFT study

The regio- and chemoselective polar [3+2] cycloaddition (32CA) of the Padwa carbonyl ylide (CY) with α-methylene ketone (αMK) to yield the oxa-bridged spirocycloadduct has been studied using the DFT method at the B3LYP/6-31G(d) computational level. Six reactive channels associated to the stereo-, regio-, and chemoselective approach modes of the CY to the CC and CO reactive sites of the αMK have been analyzed. DFT calculations for this cycloaddition are in complete agreement with the experimental outcome, explaining the reactivity and selectivity of the formation of the [3+2] cycloadduct. Analysis of the global and local electrophilicity and nucleophilicity indices allows an explanation about the regio- and chemoselectivity of this 32CA reaction. Intrinsic reaction coordinate (IRC) calculations and the topological analysis of the electron localization function (ELF) of the relevant points of the favored reactive channel explain the one-step two-stage nature of the mechanism of this cycloaddition.     

DFT studies on the reaction mechanism of <Emphasis Type="Italic">cis</Emphasis>-dioxoruthenium(VI)-mediated alkene oxidation

Density functional theory (DFT) calculations with the B3LYP functionals elucidated the reactivity, and mechanism of cis-dioxoruthenium(VI)-mediated alkene oxidation reaction. The most plausible reaction pathway was discussed as three distinct processes, including (1) the oxidative [3+2] cycloaddition reaction, (2) the reduction process from Ru(IV) to Ru(II), and (3) the ligand substitution to release the final product. The first process has been confirmed to be rate-determining one, since each distinct step is strongly exothermic. The electronic state of cis-dioxoruthenium(VI) and the change of the electronic state during the reaction processes are rationalized in this article.     

3<Emphasis Type="Italic">H</Emphasis>-Benzo[<Emphasis Type="Italic">a</Emphasis>]imidazo[4,5-<Emphasis Type="Italic">j</Emphasis>]acridine as a new fluorescent heterocyclic system: synthesis,spectral studies,and quantum chemical investigation

The synthesis, spectral studies, and theoretical calculations of a new fluorescent heterocyclic system are described. New 3H-benzo[a]imidazo[4,5-j]acridines were obtained in high yields by the reaction of 1-alkyl-5-nitro-1H-benzimidazoles with (naphthalen-1-yl)acetonitrile via nucleophilic substitution of hydrogen, and their structures were established by spectral (UV-Vis, FT-IR, 1H and 13C NMR) and analytical data. Study of the optical and solvatochromic properties of the dyes revealed their high molar absorption coefficients and high fluorescence quantum yields which in some cases exceeded quantum yields of well-known fluorescent dyes such as fluorescein. Density functional theory (DFT) calculations using the B3LYP hybrid functional and 6-311++G(d,p) basis set were performed to obtain optimized geometries and frontier orbital structures of the synthesized compounds. The electronic absorption spectra were also simulated by the time-dependent density functional theory (TD-DFT) method.     

Synthesis and structure of silicon-containing <Emphasis Type="Italic">N</Emphasis>-methyland <Emphasis Type="Italic">N</Emphasis>-benzoylamides of diisopropylphosphoric acid

Diisopropyl N-benzoyl-N-(trimethylsilyl)phosphoramidate reacts with ClCH₂SiMe₂Cl under mild conditions to form diisopropyl N-benzoyl-N-[(chlorodimethylsilyl)methyl]phosphoramidate (III). Diisopropyl N-methyl-N-(trimethylsilyl)phosphoramidate with ClCH₂SiMe₂Cl affords an N-transsilylation product which does not rearrange into diisopropyl N-[(chlorodimethylsilyl)methyl]-N-methylphosphoramidate (XV) even under severe conditions (4 h, 130°C). Compound XV was prepared by the reaction of diisopropyl phosphorochloridate with N-[(methoxydimethylsilyl)methyl]-N-methylamine followed by treatment of diisopropyl N-[(methoxydimethylsilyl)methyl]-N-methylphosphoramidate with boron trichloride. Analysis of experimental and calculated ²⁹Si chemical shifts points to a five-coordinate silicon atom in compound III and a fourcoordinate silicon atom in compound XV. According to B3LYP calculations with due regard to solvent effects, compound III is an isomer with a C=O→Si bond. By variation of substituents at silicon, phosphorus, and carbonyl carbon atoms, chelate structures with either C=O→Si or P=O→Si dative bonds can be obtained.     

<Emphasis Type="Italic">N</Emphasis>-aryl-<Emphasis Type="Italic">o</Emphasis>-iminobenzoquinones as novel regulators of radical polymerization

The effect of a number of quinoid compounds on methyl methacrylate polymerization initiated by azo-bis(isobutyronitrile) has been studied. It has been revealed that N-aryl-o-iminobenzoquinones, in contrast to o-benzoquinones, can provide radical polymerization of methyl methacrylate in controllable mode. The efficiency of the compounds as chain growth regulators has been found to depend on their composition and reaction conditions. It has been established that 4,6-di-tert-butyl-N-(2,6-diethylphenyl)-o-iminobenzoquinone and 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-iminobenzoquinone under radical initiation conditions provide the synthesis of poly(methyl methacrylate) with wide-range molecular weight, retaining polydispersity indices about ~1.4–1.8 up to deep conversions.     

Synthesis and antimicrobial activity of novel fused [1,2,4]triazino[5,6-<Emphasis Type="Italic">b</Emphasis>]indole derivatives

Synthesis of new fused systems of triazino[5,6-b]indole starting with preparation of 3-amino[1,2,4]-triazino[5,6-b]indole 1 by reaction of isatin with 2-aminoguanidinium carbonate in boiling acetic acid is presented [1]. Intermediate compound 1 reacted with aldehyde, ethyl chloroformate, triethyl orthoformate, and ninhydrine and gave new heterotetracyclic nitrogen systems, such as 3-(N ²-guanidinylimino)indole-2(1H)-one 2, 3-(N-ethoxycarbonylamino)-4H-[1,2,4]triazino[5,6-b]indole 3, 3-(N-ethoxymethyleneamino)-4H-[1,2,4]-triazino[5,6-b]indole 4, 3-(hydrazinothiocarbonylamino)-4H-[1,2,4]triazino[5,6-b]indole 5, respectively. N-(1,3-dioxoindene-2-ylidene)-4H-[1,2,4]triazino[5,6-b]indol-3-amine 6 was synthesized by reaction of compound 1 with aldehyde, ethyl chloroformate, triethyl orthoformate, and ninhydrine. New fused indole systems, pyrimido[2′,1′:3,4][1,2,4]triazino[5,6-b]indol-3(4H)-one 8, 9, 11, 12 and 1H-imidazo[2′,1′:3,4][1,2,4]triazino-[5,6-b]indol-2(3H)-one 10, were synthesized in the reaction of the intermediate 1 with bifunctional compounds. Structures of the products were elucidated from their elemental analysis and spectral data (IR, ¹H and ¹³C NMR and mass spectra). Antimicrobial activity of some synthesized compounds was tested.     

Synthesis of Bisthiacalix[4]arene: Reaction of Piperazine with Monoacrylamide Derivative of <Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-Butylthiacalix[4]arene

The reaction of acryloyl chloride with the monoamine derivative of p-tert-butylthiacalix[4]arene was used to synthesize p-tert-butylthiacalix[4]arene monoacrylamide in the 1,3-alternate conformation. The effect of the nature of the amine on the result of its Michael reaction with the synthesized p-tert-butylthiacalix[4]arene monoacrylamide was studied. The latter was reacted with piperazine to obtain bisthiacalix[4]arene with the macrocyclic fragments in the 1,3-alternate conformation.     

Reactions of 1,3-Dialkyl-5-amino-1,3-dihydro-2<Emphasis Type="Italic">H</Emphasis>-imidazo-[4,5-<Emphasis Type="Italic">b</Emphasis>]pyridin-2-ones with acetylacetone and ethyl acetoacetate

1,3-Dialkyl-5-amino-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-ones reacted with acetylacetone to give the corresponding 4-(1,3-dialkyl-2-oxo-1,3-dihydro-2H-imidazo[4,5-b]pyridin-5-ylamino)pent-3-en-2-ones which underwent intramolecular cyclization to 1,3-dialkyl-5,7-dimethyl-1,3-dihydro-2H-imidazo[4,5-b]-[1,8]naphthyridin-2-ones on heating in polyphosphoric acid or diphenyl ether. Analogous reaction of 1,3-dialkyl-5-amino-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-ones with ethyl acetoacetate led to the formation of ethyl 3-(1,3-dialkyl-2-oxo-1,3-dihydro-2H-imidazo[4,5-b]pyridin-5-ylamino)but-2-enoates whose cyclization afforded 1,3-dialkyl-8-hydroxy-7-methyl-1,3-dihydro-2H-imidazo[5,4-b][1,8]naphthyridin-2-ones.     

Hetero-Diels–Alder Reaction of Aroylpyrrolo[1,2-<Emphasis Type="Italic">a</Emphasis>]quinoxalinetriones with Styrene

Hetero-Diels–Alder reaction of 3-aroylpyrrolo[1,2-a]quinoxaline-1,2,4(5H)-triones with styrene afforded diastereoisomeric (5R*,6aR*)- and (5S*,6aR*)-3,5-diaryl-5,6-dihydropyrano[4′,3′:2,3]pyrrolo[1,2-a]-quinoxaline-1,2,7(8H)-triones.     

Unexpected Reaction of Ethyl 4-(Chloromethyl)pyrazolo- [5,1-<Emphasis Type="Italic">c</Emphasis>][1,2,4]triazine-3-carboxylates with Thiourea and Its Mechanism

The reaction of ethyl 4-(chloromethyl)pyrazolo[5,1-c][1,2,4]triazine-3-carboxylates with thiourea in dimethylformamide involves ANRORC rearrangement (Addition of the Nucleophile, Ring Opening, and Ring Closure) followed by N-formylation to give N-{5-(4-oxo-8-phenyl-1,4-dihydropyrazolo[5,1-c][1,2,4]-triazin-3-yl)-1,3-triazol-2-yl}formamides whose structure was confirmed by X-ray analysis. The reaction mechanism has been studied by HPLC/MS.     

Synthesis and Fungicidal Activity of Substituted 3-(1,2-Oxazolidin-3-yl)pyridines

Substituted 3-(1,2-oxazolidin-3-yl)pyridines were synthesized by 1,3-dipolar cycloaddition of ethyl acrylate, styrene, and their derivatives to N-(pyridin-3-ylmethylidene)-N-phenylaminoxide. The obtained compounds exhibit a fungicidal activity.