四氟乙烯齐聚体的反应 四氟乙烯四、五聚体和芳香胺的反应

前已报道四氟乙烯四聚体(全氟-3,4-甲基己烯-3)(1)、五聚体(全氟-3,4-二甲基-4-乙基己烯-2)(2)和脂肪烷氧以及脂肪胺的亲核反应.本文报道化合物1,2和芳香胺如苯胺、β-萘胺的反应.由于烯烃1、2双键处于分子中间,因而当亲核试剂进攻时,双键容易发生重排,生成的末端基烯烃更具反应性,故导致一取代、二取代、三取代以及环化降解等复杂产物.     

Photochromism of mixed crystals containing bisthienyl-, bisthiazolyl-, and bisoxazolylethene derivatives

Single crystals composed of two or three different kinds of diarylethenes, having similar geometrical structures but different colors in the closed-ring isomers, 1,2-bis(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene (1a), 1,2-bis(5-methyl-2-phenyl- 4-thiazolyl)perfluorocyclopentene (2a), and 1,2-bis(5-methyl-2-phenyl-4-oxazolyl)perfluorocyclopentene (3a) have been prepared in an attempt to form single crystals which exhibit different colors, depending on illumination wavelengths. When 1a and 2a are mixed in ethanol and the content of 2a in the feed is higher than that of 1a, only a needle-shaped crystal is obtained. The crystal shape is similar to that of 2a. On the other hand, high content of 1a in the feed leads to formation of a block-shaped crystal, of which the shape is similar to that of 1a. At a feed ratio of 1:1 for 1a and 2a, two types of crystals such as needle- and block-shapes are obtained from the same batch. Mixed crystals composed of three kinds of derivatives 1a/2a/3a have also been prepared. A crystal composed of the three derivatives in the molar ratio of 32 (1a):53 (2a):15 (3a) was obtained. X-ray analysis proved that 1a and 3a are packed in the crystal lattice of 2a. The mixed crystal 1a/2a/3a changed color from colorless to yellow, red, and blue upon irradiation with light of appropriate wavelengths.     

Chloroplast Biogenesis 81: Transient Formation of Divinyl Chlorophyll a Following a 2.5 ms Light Flash Treatment of Etiolated Cucumber Cotyledons

Abstract— The possible conversion of nascent divinyl (DV) chloro-phyllide a (Chlide a ) to DV chlorophyll a (Chi a during the early stages of greening in a dark divinyl-light divinyl-light/dark divinyl (DDV-LDV-LDDV) plant species was investigated. Etiolated cucumber cotyledons ( Cucu-mis sativus L .) were subjected to a 2.5 ms light flash followed by darkness. The DV and monovinyl (MV) components of the protochlorophyllide a (Pchlide a ), Chlide a , Pchlide a ester and Chi a pools were monitored quantitatively by high-resolution spectrofluorometry, immediately following the light treatments and after various periods in darkness. The light treatment photoconverted DV and MV Pchlide a to DV and MV Chlide a . Some photoconversion of MV Pchlide a ester to MV Chi a also appeared to take place. A sharp rise in the level of DV Chi a following the light treatment could not be accounted for by photoconversion of DV Pchlide a ester. It must have arisen by rapid esterification of nascent DV Chlide a. After illumination, the level of DV Chi a rose for 5 s and then declined. The implications of the transient rise and fall of DV Chi a content following illumination to the Chi a biosynthetic heterogeneity is discussed.     

Refolding foldamers: triazene-arylene oligomers that change shape with chemical stimuli

We describe the preparation of five triazene-arylene oligomers (3, 4, 7, 8, and 11) and investigations of their folding properties in aqueous solution. These oligomers contain four 2-fold rotors and populate a conformational ensemble comprising at least 10 states. Extensive 1D and 2D NMR studies as well as X-ray crystallography establish that the presence of three members of the cucurbit[n]uril family (CB[n]), CB[10], CB[7], and CB[8], results in the selective population of the (a,a,a,a)-, (a,s,s,a)-, and (a,a,a,s)-conformers. As a result of the high affinity and highly selective binding properties of the CB[n] family, it is possible to fold a single foldamer strand (3) into the CB[8].(a,a,a,s)-3 conformer by the addition of CB[8], then unfold and refold it into the CB[7].(a,s,s,a)-3.CB[7] conformer by addition of CB[7] and 3,5-dimethylaminoadamantane (17), then unfold and refold it again into the CB[10].(a,a,a,a)-3 conformer by addition of CB[10].CB[5] and aminoadamantane (18). The transformation of CB[8].(a,a,a,s)-3 into CB[7].(a,s,s,a)-3.CB[7] proceeds through the intermediacy of CB [8].(a,a,s,a)-3.CB[7], which enhances the rate of dissociation of strand 3 from CB[8].     

Highly Stereoselective Cationic Cyclization Assisted by a Sulfenyl Group. Scope, Limitation, and Mechanism

When 8-acetoxy-2-methyl-9-(phenylthio)-2-nonene (1a) was treated with an acid, followed by a base, alkylative cyclization proceeded to give a mixture of 1,2-disubstituted cyclohexanes: 2a, 3a, and 4a. The stereochemistry of the reaction was only slightly affected by the leaving group and the reaction conditions, such as the temperature, solvent, and acid. However, the bulkiness of the sulfenyl group had a great effect on the stereochemical course of the reaction. High trans selectivity was attained when 1c (a derivative of 1a with a bulkier sulfenyl group) was used as a substrate. On the other hand, the length and rigidity of the carbon chain of the substrate also had a major effect on the stereochemistry of the reaction; a high cis selectivity was observed when 10a (a one-carbon-fewer analog of 1a) or 15a (a derivative with one more double bond in the carbon chain than in 1a) was used as the substrate. The reaction proceeded via a 6,5- or 5,5-fused-ring intermediate. The sulfenyl-group-assisted reaction could be a useful method for the stereoselective cyclization of acetates of alpha-sulfenylated secondary alcohols.     

Estimating statistical distributions using an integral identity

We present an identity for an unbiased estimate of a general statistical distribution. The identity computes the distribution density from dividing a histogram sum over a local window by a correction factor from a mean-force integral, and the mean force can be evaluated as a configuration average. We show that the optimal window size is roughly the inverse of the local mean-force fluctuation. The new identity offers a more robust and precise estimate than a previous one by Adib and Jarzynski [J. Chem. Phys. 122, 014114 (2005)]. It also allows a straightforward generalization to an arbitrary ensemble and a joint distribution of multiple variables. Particularly we derive a mean-force enhanced version of the weighted histogram analysis method. The method can be used to improve distributions computed from molecular simulations. We illustrate the use in computing a potential energy distribution, a volume distribution in a constant-pressure ensemble, a radial distribution function, and a joint distribution of amino acid backbone dihedral angles.     

Formation of a stable 14-helix in short oligomers of furanoid cis-beta-sugar-amino acid

Oligomers of a new class of sugar amino acids (SAA) using a xylofuranoic acid has been shown to generate a robust 14-helix. The design involved the use of xylofuranose with a cis arrangement between the amine and carboxyl groups to promote the adoption of a 14-helix instead of a mixed 12/10-helix observed in a sugar oligomer using a ribofuranoic acid and beta-Ala. The observation of a stable right-handed 14-helix in a cis-SAA is unprecedented.     

Synthesis of 3, 4, 4a, 5, 6, 7, 8, 8a α-Octahydro-4a β, 8α-Dimethyl-2(1H)-Naphthalenones from the Wieland-Miescher Ketone

Conversion of the Wieland-Miescher ketone to a bicyclic dienophile capable of providing the AB rings of the picrasane skeleton of the guassinoids required the introduction of a C-8α methyl group in a 2-decalone. Among the routes explored, the conversion of the Wieland-Miescher ketone to a 4,4a,5,6,7,8-hexahydro-4aβ-methyl-8-methylene-2(3H)-napthalenone and subsequent reduction to a 3,4,4a,5,6,7,8,8aα-octahydro-4aβ,8α-dimethyl-2(1H)-napthalenone proved most useful.     

Evidence for a simple monatomic ideal glass former: the thermodynamic glass transition from a stable liquid phase

Under cooling, a liquid can undergo a transition to the glassy state either as a result of a continuous slowing down or by a first-order polyamorphous phase transition. The second scenario has so far always been observed in a metastable liquid domain below the melting point where crystalline nucleation interfered with the glass formation. We report the first observation of the liquid-glass transition by a first-order polyamorphous phase transition from the equilibrium stable liquid phase. The observation was made in a molecular dynamics simulation of a one-component system with a model metallic pair potential. In this way, the model, demonstrating the thermodynamic glass transition from a stable liquid phase, may be regarded as a candidate for a simple monatomic ideal glass former. This observation is of conceptual importance in the context of continuing attempts to resolve the long-standing Kauzmann paradox. The possibility of a thermodynamic glass transition from an equilibrium melt in a metallic system also indicates a new strategy for the development of bulk metallic glass-forming alloys.     

Electrophoresis of a sphere at an arbitrary position in a spherical cavity filled with Carreau fluid

Boundary effects on the electrophoretic behavior of a charged entity are of both fundamental and practical significance. Here, they are examined by considering the case where a sphere is at an arbitrary position in a spherical cavity under conditions of low surface potential and weak applied electrical field. Previous analyses are extended to the case of a non-Newtonian fluid, and a Carreau model is adopted for this purpose. The effects of key parameters such as the thickness of a double layer, the relative sizes of particle and cavity, the position of a particle, and the nature of a fluid on the electrophoretic mobility of a particle are discussed. Several interesting phenomena are observed. For example, if the applied electric field points toward north, the mobility of a particle has a local maximum when it is at the center of a cavity. However, if a particle is sufficiently close to the north pole of a cavity, its mobility exhibits a local minimum as its position varies. This does not occur when the particle is close to the south pole of the cavity; instead, it may move in the direction opposite to that of the applied electric field. For a Newtonian fluid, if a particle is close to the north pole of a cavity, its upward movement yields a clockwise (counterclockwise) vortex near the north pole of the cavity and a counterclockwise (clockwise) vortex near the south pole of the cavity on its right (left)-hand side. The latter is not observed for a Carreau fluid.     

Synthesis of some hydroxy and methoxymethyl derivations of 1H-pyrazolo[5,1-c]-1,2,4-triazoles

Electrophilic hydroxylation of a pyrazolotriazole with a mixture of trifuoroacetic attack of methanolic hydroxide ion on a dichloropyrazolotriazole gave a 6-methoxymethylpyrazolotriazole by a mechanism involveing a cyclopropane intermediate.     

Statistical mechanics of three-dimensional vesicles

We consider a lattice model of three-dimensional vesicles in which the boundary of the vesicle is a self-avoiding plaquette surface, homeomorphic to a sphere. Surfaces with fixed area can enclose a variety of different volumes and we associate a fugacity with the enclosed volume to mimic the effect of a pressure difference across the surface. Pairs of plaquettes which share a common edge can be in the same plane or normal to each other and we associate a fugacity with adjacent pairs of plaquettes at right angles to represent a surface stiffness term. We discuss the behaviour of the surfaces in the infinite surface area limit, as a function of these two fugacities.     

A few notes about polymer knots

Basic theoretical results on knots in a single polymer chain are reviewed. The probability of a knot upon random chain closure and the effect of a preexisting knot on the physical characteristics of a molecule are considered. The probability of a knot in the linear chain is related to knot entropy and the minimum work required for a knot to become untied in a thermodynamically equilibrium environment. However, when chain topology is fixed by end closure, it controls, for example, the average radius of gyration of a coil: a coil appears to be more compact as compared with a phantom one when a knot is more complex than a certain threshold, and more swollen in the opposite case.     

Controlled Dynamic Helicity of a Folded Macrocycle Based on a Bisterephthalamide with a Twofold Z‐Shaped Structure

Dynamic helicity in a folded macrocycle and control of the helical preference are described. We designed macrocycle 1 with a dual mode of folding through the integration of two flexible units that are arranged twice to form a cyclic structure. As a folding unit, we used a terephthalamide skeleton and a Z‐shaped hydrocarbon: the former acted as a control unit to induce a preference of a particular sense of dynamic helicity and the latter was just a spacer. A terephthalamide unit provided a binding site for capturing a ditopic hydrogen‐bonding guest when it adopted helically folded syn forms (M/P). Thus, only the terephthalamide unit controlled the helical sense of dynamic helicity in a folded macrocycle through the supramolecular transmission of chirality upon complexation with a chiral ditopic guest. In addition, chirality on a host could also contribute to the control of the helical preference in a folded macrocycle, which led to exceptionally enhanced chiroptical signals.     

Quantitative X-Ray Microanalysis of Heterogeneous Materials Using Monte Carlo Simulations

Monte Carlo simulations are used to obtain new results of x-ray microanalysis of sample types frequently encountered in practical analytical situations such as a vertical layer embedded in a homogeneous matrix and a spherical particulate deposited on a substrate. The simulations show that a 10-nm layer of boron in a steel matrix can be imaged using backscattered electrons and detected using x-ray microanalysis with a field emission scanning electron microscope even with an electron beam energy equals to 20 keV and also that these simulations can be useful to estimate the optimum acceleration voltage to perform such analyses. For a carbon spherical particulate located on the top of a gold substrate, it is shown that x-ray emission and electron backscattering are a strong function of the diameter of the particulate and also of the electron beam energy. Finally, a new method to determine the thickness of a thin film deposited on a substrate is proposed that does not require the measurement of the beam current. That technique can also be used for a spherical particulate deposited on a substrate.     

Fast fringe-field switching of vertically aligned liquid crystals between high-haze translucent and haze-free transparent states

We report control of the haze value in a liquid crystal (LC) cell driven by a fringe electric field. When a fringe field is applied to a vertically aligned (VA) cell, a large spatial phase difference with a short grating period is induced in the LC layer. The average grating period of a VA cell driven by a fringe field is a quarter of the pitch of the interdigitated electrodes, which is half of the grating period of a VA cell driven by an in-plane field. Moreover, a sharper spatial phase profile is built around the edges of the interdigitated electrodes, which led to a high haze of 84.3% in the translucent state. The device was haze-free in the transparent state owing to the use of an LC layer without a polymer structure. To increase the haze value of the LC device while retaining a short response time, we developed an LC cell with crossed interdigitated electrodes where a large spatial phase difference is induced with little dependence on the azimuth angle. By applying a fringe electric field to a 20 μm thick LC cell using crossed interdigitated electrodes, we demonstrated a very high haze of 95.4% and a response time of less than 5 ms.     

Crystal engineering of photochromic diarylethene single crystals

Photochromic performance of diarylethene single crystals was controlled by crystal engineering using non-covalent aromatic-aromatic interactions as the directional intermolecular force. A diarylethene derivative with two pentafluorophenyl groups, 1,2-bis(2-methyl-5-pentafluorophenyl-3-thienyl)perfluorocyclopentene (1a), formed stoichiometric co-crystals with benzene (Bz) and naphthalene (Np) by aryl-perfluoroaryl interactions. Face-to-face pi-stacking interactions between the pentafluorophenyl groups of 1a and the aromatic molecules are responsible for 2:1 and 1:1 stoichiometric compositions in 1a/Bz and 1a/Np co-crystals, respectively. The diarylethene underwent thermally stable and photoreversible photochromic reactions in a homo-crystal of 1a and co-crystals 1a/Bz and 1a/Np. The absorption spectra of the photogenerated closed-ring isomers varied depending on the conformation of the diarylethene molecules packed in the crystals. The diarylethene 1a also formed 1:1 stoichiometric co-crystals with different kinds of diarylethenes, 1,2-bis(2-ethyl-5-phenyl-3-thienyl)perfluorocyclopentene (2a) and 1,2-bis[2-methyl-5-(1-naphthyl)-3-thienyl]perfluorocyclopentene (3a). Both co-crystals 1a/2a and 1a/3a showed photochromism. Although 1a, 2a, and 3a underwent efficient photocyclization reactions in their homo-crystals, highly selective photocyclization reactions of 2a or 3a were observed in the co-crystals. The selective reactions were confirmed by HPLC and X-ray crystallography. Excited energy transfers from 1a to 2a and from 1a to 3a are considered to occur and cause the selective reactions.     

Solid-phase synthesis of 5-arylhistidines via a microwave-assisted Suzuki-Miyaura cross-coupling

Microwave irradiation efficiently promoted the solid-phase Suzuki-Miyaura reaction of a 5-bromohistidine with various arylboronic acids in the presence of a palladium catalyst. This methodology allowed the synthesis of peptides bearing a histidine residue substituted at position 5 of the imidazole ring with a phenyl, a substituted phenyl, a pyridyl, or a thienyl ring, as well as with the benzene ring of a tyrosine residue.     

Modeling of the pseudo-colloids migration for multi-member decay chains with a arbitrary flux boundary condition in a fractured porous medium

A deep geologic disposal is the prime option for the long-term isolation of high-level radioactive waste (HLW) in many countries. For deeply located repositories, a radionuclide released from a failed waste container moves through the engineered and natural barriers before it reaches a biosphere. The pseudo-colloid which a radionuclide is adsorbed on a moving natural humic or fulvic colloid can be generated in a fractured porous medium. The size of a colloid is in general in the order of a hundred nanometer so that its migration velocity in a fracture is higher than that of a radionuclide due to the hydrochromatic effect. A large colloid cannot diffuse easily into a surrounding rock. Also, there are many kinds of actinides and these actinides have decay chains. In this analysis, the canonical form solution is derived for a pseudo-colloid and a solute in a fracture and a surrounding rock with a realistic inlet boundary condition with multi-member decay chains. It is used the Fortran based a computational code which uses a special subroutine for the inversion of Laplace transform. Consequently, the role of the pseudo-colloid in the fractured porous medium is important and also their decay chains aren’t neglected in the performance assessment of the HLW.     

Separation of progressive motile sperm from mouse semen using on-chip chemotaxis

We present a novel method for the separation of progressive motile sperm from non-progressive motile and immotile sperm. This separation was accomplished by inducing chemotaxis along a longitudinal chemical gradient in a microchip composed of a biocompatible polydimethysiloxane layer and a glass substrate. In a preliminary experiment using fluorescent rhodamine B as a marker, we verified that a chemical gradient was generated by diffusion within the microchannel. We used acetylcholine as a chemoattractant to evaluate the chemotactic response of sperm. We tested the response to a 1/2 to 1/64 dilution series of acetylcholine. The results of a mouse sperm chemotaxis assay showed that progressive motile sperm swam predominantly toward the outlet at an optimal chemical gradient of 0.625 (mg/ml)/mm of acetylcholine. This device provides a convenient, disposable, and high-throughput platform that could function as a progressive motile sperm sorter for potential use in intracytoplasmic sperm injection.