Synthesis of highly monodisperse quantum dot‐loaded polymer beads by impregnation and precipitation techniques

A novel approach to the synthesis of highly monodisperse quantum dot‐loaded polymer beads by combining impregnation and precipitation techniques was reported. The monodisperse poly(glycidyl methacrylate) (PGMA) beads were first synthesized by dispersion polymerization. Then, the PGMA beads were chemically modified to generate carboxyl groups, and impregnation of cadmium ions (Cd²⁺) inside the beads. Subsequently, the cadmium ions were reacted with thioacetamide to form cadmium sulfide (CdS) quantum dots within the polymer beads. The morphology, structure, and properties of CdS quantum dot‐loaded polymer beads were studied by field emission scanning electron microscope (SEM), transmission electron microscope, fluorescence spectrophotometer, fluorescence microscope, Fourier transform infrared spectroscopy, powder X‐ray diffraction, and thermogravimetric analysis. The results indicated that the CdS quantum dot‐loaded polymer beads had an average size of 1.4 μm, and were highly monodisperse. More interestingly, the CdS quantum dots distributed evenly within the polymer beads, which provide very strong fluorescence intensity. The existence of carboxyl groups on the quantum dot‐loaded polymer beads was measured quantitatively, and was found to be 0.2 mmol/g. These CdS quantum dot‐loaded polymer beads involving functional carboxyl groups would have potential applications in biological immunoassay and photoelectronic fields. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

L-Cysteine-coated CdSe/CdS core-shell quantum dots as selective fluorescence probe for copper(II) determination

Quantum dots (QDs) or semiconductor nanocrystals have been receiving great interest in the last few years. In this paper, L-cysteine-coated CdSe/CdS core-shell QDs (λ_em = 585 nm) have been prepared, which have excellent water-solubility. The full width at half maximum (FWHM) of the photoluminescence of these nanocrystals is very narrow (about 30 nm), and the quantum yield (QY) is 15% relative to Rhodamine 6G in ethanol (QY = 95%). With excess free L-cysteine in the solution, the fluorescence intensity of L-cysteine-coated CdSe/CdS QDs showed improved stability. It was found that the fluorescence of L-cysteine-capped CdSe/CdS QDs could be quenched only by copper (II) ions and was insensitive to other physiologically important cations, such as Ca²⁺, Mg²⁺, Zn²⁺, Al³⁺, Fe³⁺, Mn²⁺ and Ni²⁺ etc. Based on this finding, the quantitative analysis of Cu²⁺ with L-cysteine-capped CdSe/CdS QDs has been established. The linear range was from 1.0 × 10^− 8 to 2.0 × 10^− 7 mol L^− 1 and the limit of detection (LOD) was 3.0 × 10^− 9 mol L^− 1 (S/N = 3). The proposed method has first been applied to the determination of Cu²⁺ in vegetable samples with recoveries of 99.6–105.8%.     

A facile method to prepare CdS/polystyrene composite particles

Nano-CdS/polystyrene composite particles were prepared via surfactant-free emulsion polymerization. 2-(Dimethylamino)ethyl methacrylate (DMEMA) was used as auxiliary monomer which co-polymerized with styrene (St) and provided the location for coordinating with Cd²⁺. By the coordination of Cd²⁺ ions to DMEMA, mono-disperse polystyrene with the Cd²⁺ ions on the particles surface were prepared successfully. With the release of S²⁻ ions from the thioacetamide (TAA), cadmium sulfide (CdS) was formed. Nano-CdS/PS composite particles could be synthesized via this facile method. The order of materials addition and the amount of initiator both are playing important roles to the final morphologies of the composite particles. In the method proposed in this study, no surfactant was used, and the stable emulsion was successfully obtained. UV–vis absorption and fluorescence measurement indicated the quantum dot effect in the resulted nano-CdS/PS composite particles. The possible composite particle formation mechanism was presented.     

Resonance Rayleigh scattering and resonance non-linear scattering method for the determination of aminoglycoside antibiotics with water solubility CdS quantum dots as probe

In pH 6.6 Britton–Robinson buffer medium, the CdS quantum dots capped by thioglycolic acid could react with aminoglycoside (AGs) antibiotics such as neomycin sulfate (NEO) and streptomycin sulfate (STP) to form the large aggregates by virtue of electrostatic attraction and the hydrophobic force, which resulted in a great enhancement of resonance Rayleigh scattering (RRS) and resonance non-linear scattering such as second-order scattering (SOS) and frequency doubling scattering (FDS). The maximum scattering peak was located at 310 nm for RRS, 568 nm for SOS and 390 nm for FDS, respectively. The enhancements of scattering intensity (ΔI) were directly proportional to the concentration of AGs in a certain ranges. A new method for the determination of trace NEO and STP using CdS quantum dots probe was developed. The detection limits (3σ) were 1.7 ng mL⁻¹ (NEO) and 4.4 ng mL⁻¹ (STP) by RRS method, were 5.2 ng mL⁻¹ (NEO) and 20.9 ng mL⁻¹ (STP) by SOS method and were 4.4 ng mL⁻¹ (NEO) and 25.7 ng mL⁻¹ (STP) by FDS method, respectively. The sensitivity of RRS method was the highest. The optimum conditions and influence factors were investigated. In addition, the reaction mechanism was discussed.     

Crystalline superlattices from single-sized quantum dots

Despite the recent progress toward the synthesis of monodisperse semiconducting nanocrystals, it remains a challenge to prepare quantum dot structures with a precise number of atoms. Here, we report synthesis, crystal structure, and optical properties of a family of cadmium sulfide nanocrystal superlattices assembled through single-sized semiconducting clusters. Clusters of various sizes have been made. The largest cluster determined from single-crystal analysis has a total of 138 metal-chalcogen sites. It is the largest known single-sized II-VI quantum dot and is also the first one with more than 100 metal-chalcogen sites. X-ray powder diffraction (XRD) and optical absorption studies indicate the presence of even larger single-sized quantum dots (>200 metal-chalcogen sites). These clusters consist of cubic zinc blende-type core and hexagonal wurtzite-type corners and can exist in up to five isomeric forms that differ only in the position of the hexagonal-cubic interface.     

Shape evolution of CdSe nanocrystals in vegetable oils: A synergistic effect of selenium precursor

In this contribution, common vegetable oils are used as coordination solvents for synthesis of high quality CdSe nanocrystals. Various shaped nanocrystals (quantum dots, quantum rods, multipods, arc structure, etc.) can be produced free of alkylphosphonic acids. Shape evolution can be induced by three types of selenium precursors: ODE-Se, VO-Se and TOP-Se (ODE, 1-octadecene; VO, vegetable oil; TOP, trio-n-octylphosphine). The quantum yields of NCs are 15–40%. The full width at half-maximum (fwhm) of the photoluminescence spectra are 27 ± 1 nm for quantum dots and 23 ± 1 nm for quantum rods/multipods. The obtained quantum dots are zinc blende structure and stable at high temperature. Wurtzite, zinc blende, twinned and dislocation can coexist in the obtained quantum arc structure, which will provide new physical model to study the subtle optoelectronic properties of NCs.     

Mn,B, N co-doped graphene quantum dots for fluorescence sensing and biological imaging

The fluorescent and quantum yield (QY) of graphene quantum dots has been improved in recent years by doped atoms, which have good application prospects in fluorescence sensors and biological imaging. Here, a one-step hydrothermal synthesis method was used to synthesize manganese ions bonded with boron and nitrogen-doped graphene quantum dots (Mn-BN-GQDs). Compared with the boron and nitrogen co-doping graphene quantum dots (BN-GQDs), the fluorescence properties and quantum yield of Mn-BN-GQDs are significantly improved. Meanwhile, Mn-BN-GQDs exhibit low toxicity and good fluorescence imaging in living cells and has high selectivity to Fe³⁺ ions. Therefore, this experiment design Mn-BN-GQDs as a fluorescence sensor to detect Fe³⁺ ions, providing strong evidence for the advanced high sensitivity, selectivity and wide detection range of the Mn-BN-GQDs as a fluorescence sensor. These results indicate a dual linear relationship with good linear relationships in the 10–100 μM and 100–800 μM ranges, and limit of detection are 0.78 μM and 9.08 μM, respectively. Cellular imaging results demonstrate that Mn-BN-GQDs can be used as fluorescence sensors in biological imaging. Mn-BN-GQDs can be used for fluorescence sensing in biological imaging in combination with low toxicity, QY and quantum dot lifetime.     

Control of particle size distribution of CdS quantum dots in gel matrix

A novel sol-gel process has been developed to prepare nano-sized CdS quantum dots to improve the nonlinear optical properties. A bifunctional ligand, 3-aminopropyl triethoxysilane H₂N(CH₂)₃Si(OC₂H₅)₃, was used to disperse the Cd²⁺ ions in the gel solution. The CdO and CdS particles were observed by transmission electron microscope (TEM). The size of CdS microcrystallites with concentrations up to 13 wt.% in SiO₂ gel matrix was found to be in the range of 2–4 nm with a very sharp size distribution. A well-defined absorption edge was observed in the absorption spectrum.     

Functionalized manganese-doped zinc sulfide quantum dot-based fluorescent probe for zinc ion

We report on a simple strategy for the determination of zinc ion by using surface-modified quantum dots. The probe consists of manganese-doped quantum dots made from zinc sulfide and capped N-acetyl-L-cysteine. The particles exhibit bright yellow-orange emission with a peak at 598?nm which can be attributed to the ⁴T₁→⁶A₁ transition of Mn(II). This bright fluorescence is effectively quenched by modifying the sulfur anion which suppresses the radiative recombination process. The emission of the probe can then be restored by adding Zn(II) which causes the formation of a ZnS passivation layer around the QDs. The fluorescence enhancement caused is linear in the 1.25 to 30?μM zinc concentration range, and the limit of detection is 0.67?μM.

A novel silica-coated multiwall carbon nanotube with CdTe quantum dots nanocomposite

A novel silica-coated multiwall carbon nanotube (MWNTs) with CdTe quantum dots nanocomposite was synthesized in this paper. Here, we show the in situ growth of crystalline CdTe quantum dots on the surfaces of oxidized MWNTs. The approach proposed herein differs from previous attempts to synthesize nanotube assemblies in that we mix the oxidized MWNTs into CdCl₂ solution of CdTe nanocrystals synthesized in aqueous solution. Reinforced the QD–MWNTs heterostructures with silica coating, this method is not invasive and does not introduce defects to the structure of carbon nanotubes (CNTs), and it ensures high stability in a range of organic solvents. Furthermore, a narrow SiO₂ layer on the MWNT–CdTe heterostructures can eliminate the biological toxicity of quantum dots and carbon nanotubes. This is not only a breakthrough in the synthesis of one-dimensional nanostructures, but also taking new elements into bio-nanotechnology.     

Preparation and characterization of monodisperse CdS quantum dot‐polymer microspheres

A novel and effective method for the preparation of monodisperse CdS quantum dot‐polymer microspheres was proposed. The monodisperse hollow polymer microspheres were firstly swelled in chloroform. Then, the reaction precursor composed of CdO and sulfur, was impregnated into the hollow polymer microspheres. Subsequently, the CdS quantum dots were synthesized directly within the polymer microspheres by thermal decomposition. The morphology, structure, and fluorescence properties of CdS quantum dot‐polymer microspheres were studied by scanning electron microscope, transmission electron microscope, fluorescence microscope, and flow cytometry. The results indicate that the fluorescent CdS quantum dots are successfully synthesized in the monodisperse hollow polymer microspeheres, which provide very strong fluorescence intensity, and offer excellent photostability due to the compact structure of the polymer matrix. These CdS quantum dot‐polymer microspheres have potential applications in biotechnology and biomedicine. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 751–755, 2010     

A Förster Resonance Energy Transfer Ratiometric Probe Based on Quantum Dot-Cresyl Violet for Imaging Hydrogen Sulfide in Living Cells

Hydrogen sulfide (H₂S) has been confirmed as a significant endogenous gaseous signaling molecule involved in various physiological processes. In order to monitor H₂S in living cells, a Forster resonance energy transfer (FRET) ratiometric probe based on quantum dot-cresyl violet was developed. In this work, the quantum dot nanospheres via a facile ultrasonication emulsion strategy, and the mixture chloroform solution containing hydrophobic quantum dots and COOH-functionalized amphiphilic polymer were successfully transferred into the oil-in-water micelle. The negatively charged quantum dot nanospheres with quantum dots embedded in the polymer matrixes were successfully fabricated after the evaporation of chloroform. And then, these quantum dot nanospheres were condensed with positively charged cresyl violet-azide (CV-N₃) via electrostatic interaction to obtain the complexes (QDS-N₃). The as-prepared QDS-N₃ complexes were monodispersed nanospheres with an average diameter of about 120 nm. These complexes were taken up by the cell through endocytosis, and they were still stable even in wide pH range. In addition, the QDS-N₃ complexes exhibited no cellular toxicity which was verified by MTT assay. In this ratiometric probe, CV-N₃ as a FRET acceptor was conjugated to quantum dot nanospheres. The quantum dots emitted at 591 nm and served as the FRET donor; once the aryl azide on the CV-N₃ was reduced by H₂S to aniline, the probe emitted at 620 nm. The ratiometric probe allowed the elimination of interference of excitation intensity, intracellular environment and other factors. Furthermore, this method also offered a general protocol for preparing nanosensors for monitoring various small molecular in living cells.     

A novel method for iodate determination using cadmium sulfide quantum dots as fluorescence probes

We have developed a novel method for the determination of iodate based on the carboxymethyl cellulose-capped CdS quantum dots (QDs). Factors affecting the iodate detection were investigated, and the optimum conditions were determined. Under the optimum conditions, the relative fluorescence intensity of CdS quantum dots was linearly proportional to IO₃⁻ over a concentration range from 1.0 × 10⁻⁸ to 1.0 × 10⁻⁵ mol L⁻¹ with a correlation coefficient of 0.9987 and a detection limit of 6.0 nmol L⁻¹. Iodide, being oxidized by bromine to form iodate, was detected indirectly. The method was successfully applied to the determination of iodate and total amount of iodine in table salt samples. The related mechanism was also discussed.     

CdS quantum dots as fluorescence probes for the sensitive and selective detection of highly reactive HSe<Superscript>−</Superscript> ions in aqueous solution

Water-soluble cadmium sulfide (CdS) quantum dots (QDs) capped by mercaptoacetic acid were synthesized by aqueous-phase arrested precipitation, and characterized by transmission electron microscopy, spectrofluorometry, and UV-Vis spectrophotometry. The prepared luminescent water-soluble CdS QDs were evaluated as fluorescence probes for the detection of highly reactive hydrogen selenide ions (HSe⁻ ions). The quenching of the fluorescence emission of CdS QDs with the addition of HSe⁻ ions is due to the elimination of the S²⁻ vacancies which are luminescence centers. Quantitative analysis based on chemical interaction between HSe⁻ ions and the surface of CdS QDs is very simple, easy to develop, and has demonstrated very high sensitivity and selectivity features. The effect of foreign ions (common anions and biologically relevant cations) on the fluorescence of the CdS QDs was examined to evaluate the selectivity. Only Cu²⁺ and S²⁻ ions exhibit significant effects on the fluorescence of CdS QDs. With the developed method, we are able to determine the concentration of HSe⁻ ions in the range from 0.10 to 4.80 μmol L⁻¹, and the limit of detection is 0.087 μmol L⁻¹. The proposed method was successfully applied to monitor the obtained HSe⁻ ions from the reaction of glutathione with selenite. To the best of our knowledge, this is the first report on fluorescence analysis of HSe⁻ ions in aqueous solution. Figure CdS quantum dots as fluorescence probes for the sensitive and selective detection of highly reactive HSe- ions in aqueous solution     

Luminescence quenching in self-assembled adducts of [Ru(dpp)3]2+ complexes and CdTe nanocrystals

We have investigated chloroform solutions containing tris(4,7-diphenyl-1,10-phenanthroline) ruthenium(II) and CdTe nanocrystal quantum dots (5.6 nm diameter). The electronic levels of these two components are such that the Ru complex can act as an energy donor towards the quantum dot, which can thus behave as an energy acceptor. Steady-state and time-resolved spectroscopic experiments indicate that the Ru complexes and the CdTe nanocrystals self-assemble to give stable 1?:?1 adducts, in which the luminescence of the former units is strongly quenched. Such a quenching can be ascribed to either energy transfer to the CdTe quantum dot, or to electron transfer from the CdTe valence band to the excited Ru complex. However, no supporting evidence for the occurrence of photoinduced energy transfer in the adduct could be found. The CdTe luminescence is also slightly quenched in the presence of the ruthenium complex. The strong association of the metal complexes with the nanocrystals suggests that self-assembly strategies may be effectively employed to achieve surface functionalization of semiconductor quantum dots with molecular units.     

Fluorescence correlation spectroscopy using quantum dots: advances, challenges and opportunities

Semiconductor nanocrystals (quantum dots) have been increasingly employed in measuring the dynamic behavior of biomacromolecules using fluorescence correlation spectroscopy. This poses a challenge, because quantum dots display their own dynamic behavior in the form of intermittent photoluminescence, also known as blinking. In this review, the manifestation of blinking in correlation spectroscopy will be explored, preceded by an examination of quantum dot blinking in general.     

Dendronized Cellulose Nanocrystals as Templates for Preparation of ZnS and CdS Quantum Dots

Cellulose nanocrystals (CNC) isolated from bleached bagasse pulp were modified with a second-generation isocyanate dendron (G2-dendron) to prepare dendronized cellulose nanocrystals (DCN). Transmission electron microscopy (TEM), elemental analysis for nitrogen, Fourier transform infrared (FTIR) and ¹³C magic angle spinning nuclear magnetic resonance (¹³C MAS NMR) proved occurrence of the modification of cellulose nanocrystals surfaces. The dendronized cellulose nanocrystals were used as templates for formation of ZnS and CdS quantum dots with uniform diameter at low temperature in water. The prepared DCN/QDs were highly soluble in water. TEM images showed that the size of the prepared quantum dots was about 5 nm in diameter. UV-Visible and fluorescence spectroscopy showed absorption and emission at wavelength values lower than that reported for bulk ZnS and CdS.     

Synthesis of surface-modified quantum dots

The review discusses the main methods used to obtain surface-modified quantum dots, specifically silicon, heavy metal chalcogenide and pnictide semiconductor nanoparticles. Examples of transformation processes of the grafted layer are considered. The importance of surface modification of A^IIB^VI- and A^IIIB^V-type semiconductor nanoparticles for the practical application of quantum dots is shown. It was determined that the most promising areas of their practical application are biology, medicine, and pharmacology. Special attention is paid to the hydrophilization of quantum dots, because only these materials can be used in biomedical applications. Modification of the quantum dot surface with amino acids is considered.

     

The Effect of CdSe and InP Quantum Dots on the Interaction of ZnO with NO<Subscript>2</Subscript> under Visible Light Irradiation

Nanocomposites based on nanocrystalline ZnO and CdSe and InP nanocrystals (quantum dots) have been synthesized by chemical precipitation and high-temperature colloidal synthesis. The microstructure parameters of the oxide matrix and the size of the CdSe and InP nanocrystals have been determined. A correlation was established between the spectral dependence of the photoconductivity of nanocomposites and the optical absorption spectra of quantum dots. The influence of CdSe and InP quantum dots on the interaction of ZnO with NO₂ under visible light irradiation has been studied. It has been shown that the synthesized nanocomposites can be used to detect NO₂ under illumination with green light without additional thermal heating.     

Label-free Photoelectrochemical Aptasensor for the Determination of Carcinoembryonic Antigen Using a Cadmum Sulfide Quantum Dot Sensitized Titanium (IV) Oxide Nanotube Electrode

A label-free photoelectrochemical aptasensor for the sensitive and selective determination of carcinoembryonic antigen was constructed based on a CdS quantum dot sensitized TiO₂ nanotube electrode. TiO₂ nanotubes with highly ordered structure and more active sites than bulk TiO₂ were prepared with an electrochemical anodic oxidation process. The CdS quantum dots were immobilized on the TiO₂ nanotubes using poly(diallyldimethylammonium chloride) as a bridge. Due to the energy level match between TiO₂ and CdS, the CdS quantum dots/TiO₂ nanotubes electrode exhibits excellent photoelectrochemical performance. The large surface area of the electrode also allows for capturing large numbers of aptamers. The fine photoelectrochemical performance and the large surface area of the electrode greatly enhanced the detection sensitivity. Under the optimal conditions, the prepared photoelectrochemical aptasensor presents desirable analytical properties for the determination of carcinoembryonic antigen in the range of 0.05 to 10?ng?mL^?1 with a detection limit of 0.014?ng?mL^?1. The application of the designed protocol was investigated by analyzing carcinoembryonic antigen in human serum samples with recoveries from 80.0 to 115.0%. This simple and sensitive method provides an alternative tool to standard biochemical assays.