电感耦合等离子体质谱法测定硼同位素丰度

以硼同位素标准物质NIST SRM 951配制标准溶液,在优化的仪器操作条件下对电感耦合等离子体质谱(ICP-MS)测定的硼同位素质量进行校正,求出校正因子,确定了样品的线性浓度范围,选定样品浓度为1.1 mg/L。在同样的仪器条件下首先测定了硼标准物质的硼同位素丰度比,测量误差为0.2%,然后测定了硼同位素浓缩过程中硼样品的硼同位素丰度比,测定结果的相对标准偏差为1.1%。此外考察了仪器的稳定性。实验结果表明本方法“记忆效应”小,结果可靠,测量精度高。     

Precise and accurate isotope ratio measurements by ICP-MS

The precise and accurate determination of isotope ratios by inductively coupled plasma mass spectrometry (ICP-MS) and laser ablation ICP-MS (LA-ICP-MS) is important for quite different application fields (e.g. for isotope ratio measurements of stable isotopes in nature, especially for the investigation of isotope variation in nature or age dating, for determining isotope ratios of radiogenic elements in the nuclear industry, quality assurance of fuel material, for reprocessing plants, nuclear material accounting and radioactive waste control, for tracer experiments using stable isotopes or long-lived radionuclides in biological or medical studies). Thermal ionization mass spectrometry (TIMS), which used to be the dominant analytical technique for precise isotope ratio measurements, is being increasingly replaced for isotope ratio measurements by ICP-MS due to its excellent sensitivity, precision and good accuracy. Instrumental progress in ICP-MS was achieved by the introduction of the collision cell interface in order to dissociate many disturbing argon-based molecular ions, thermalize the ions and neutralize the disturbing argon ions of plasma gas (Ar+). The application of the collision cell in ICP-QMS results in a higher ion transmission, improved sensitivity and better precision of isotope ratio measurements compared to quadrupole ICP-MS without the collision cell [e.g., for 235U/238U approximately 1 (10 microg x L(-1) uranium) 0.07% relative standard deviation (RSD) vs. 0.2% RSD in short-term measurements (n = 5)]. A significant instrumental improvement for ICP-MS is the multicollector device (MC-ICP-MS) in order to obtain a better precision of isotope ratio measurements (with a precision of up to 0.002%, RSD). CE- and HPLC-ICP-MS are used for the separation of isobaric interferences of long-lived radionuclides and stable isotopes by determination of spallation nuclide abundances in an irradiated tantalum target.     

Application of enriched stable isotopes as tracers in biological systems: a critical review

The application of enriched stable isotopes of minerals and trace elements as tracers in biological systems is a rapidly growing research field that benefits from the many new developments in inorganic mass spectrometric instrumentation, primarily within inductively coupled plasma mass spectrometry (ICP-MS) instrumentation, such as reaction/collision cell ICP-MS and multicollector ICP-MS with improved isotope ratio measurement and interference removal capabilities. Adaptation and refinement of radioisotope tracer experiment methodologies for enriched stable isotope experiments, and the development of new methodologies coupled with more advanced compartmental and mathematical models for the distribution of elements in living organisms has enabled a broader use of enriched stable isotope experiments in the biological sciences. This review discusses the current and future uses of enriched stable isotope experiments in biological systems.     

Determination of stable lead isotope ratios in environmental samples: Combination of microwave digestion and ICP-MS

Microwave digestion was applied as pretreatment of environmental samples for the determination of lead isotope ratios by ICP-MS. Microwave digestion decomposed the samples easily and rapidly without lead contamination. The lead isotope ratios could be measured directly by ICP-MS without tedious lead purification, because the influence of the matrix elements on measurements of lead isotope ratios is small enough to be ignored.     

Precise determination of isotopic ratios for some biologically significant elements by inductively coupled plasma mass spectroscopy

Isotope ratios for copper, iron, lead, lithium, nickel and zinc were measured with an ELAN 5000 ICP-MS instrument. Except for lithium isotopes, ratio relative standard deviations (RSDs) of about 0.1% were achieved with measurement times of 10 min or less per sample on isotope pairs that differed by no more than a factor of 10 in abundance. It was necessary to accumulate several million counts to reduce statistical counting errors, to correct for the dead time in the counting circuitry, and to compensate for a slow drift of apparent ratios with time. Drift compensation was achieved by using a third isotope of the test element, by adding two internal standard elements with isotopes bracketing the mass range of interest, or by frequent recalibration with a standard of known abundances. Attempts to compensate for drift in lithium isotope ratios were not successful and typical RSDs for ⁶Li/⁷Li remained around 0.5%. Copper and zinc ratios were measured in pig feces with ratio precision and drift behavior essentially identical to that seen for synthetic solutions.     

Determination of isotope ratios of metals (and metalloids) by means of inductively coupled plasma-mass spectrometry for provenancing purposes — A review

Since considerable time, isotopic analysis of different elements present in a sample, material or object (such as the ‘light’ elements H, C, N, O and S and ‘heavy’ elements, such as Sr and Pb), has been used in provenancing studies, as several factors — defined by “the environment” or origin of the sample — can lead to measurable differences in their isotopic composition. For the light elements, traditionally, (gas source) isotope ratio mass spectrometry (IR-MS) is used, while for a long period of time, thermal ionization mass spectrometry (TIMS) was considered as the only technique capable of detecting subtle variations in the isotopic composition of the ‘heavier’ elements. However, since the introduction of the first inductively coupled plasma mass spectrometers (ICP-MS), considerable attention has been devoted to the development of methodologies and strategies to perform isotopic analysis by means of ICP-MS. While the relatively modest isotope ratio precision offered by single-collector ICP-MS may already be fit-for-purpose under some circumstances, especially the introduction of multi-collector ICP-MS instruments, equipped with an array of Faraday detectors instead of a single electron multiplier, has lead to tremendous improvements in the field of isotopic analysis. As a result, MC-ICP-MS can be seen as a very strong competitor of TIMS nowadays, while it even provides information on the small isotopic variations shown by some elements, that are not or hardly accessible by means of TIMS (e.g., elements with a high ionization energy). Owing to these new instrumental developments, the application field of isotopic analysis by means of ICP-MS is continuously growing, also in the field of provenance determination. This paper is intended as a review of the developments in and the recent applications of isotopic analysis by means of ICP-MS in this specific research field.     

A comparison of double-focusing sector field ICP-MS, ICP-OES and octopole collision cell ICP-MS for the high-accuracy determination of calcium in human serum

Human serum is routinely measured for total calcium content in clinical studies. A definitive high-accuracy and low-uncertainty method is required for reference measurements to underpin medical diagnoses. This study presents a novel octopole collision cell ICP-MS, high-accuracy, methodology and comparison of that technique with double-focusing sector field ICP-MS and an ICP-OES method. Double-matched isotope dilution mass spectrometry (IDMS) was employed for ICP-MS techniques and an exact matching bracketing technique using scandium as an internal standard was used for ICP-OES analysis. Medium resolution mode was utilised for double-focusing sector field ICP-MS analysis to resolve the dominant interferences on the ⁴⁴Ca/⁴²Ca isotope pair. Hydrogen reaction gas was employed to chemically resolve a number of polyatomic interferences predominantly through charge transfer reactions in the octopole collision cell. Comparison data presented for NIST CRM 909b human serum analysis from all three techniques demonstrates highest accuracy (99.6%) and lowest uncertainty (1.1%) for octopole collision cell ICP-MS. Data from ICP-OES using a non-IDMS technique produces comparably accurate data and low-uncertainties. The much higher total expanded uncertainties for double-focusing sector field ICP-MS compared with octopole collision cell data are explained by lower precision on the measurement of the ⁴⁴Ca/⁴²Ca isotope ratio. Data for octopole collision cell ICP-MS submitted for an international blind trial comparison (CCQM K-14) demonstrated excellent agreement with the mean of all participants with a low expanded uncertainty.     

A rapid method for uranium isotope ratio measurement by inductively coupled plasma mass spectrometry

Uranium isotope ratio U 234/238 can be measured by commercial high-performance inductively coupled plasma mass spectrometry (ICP-MS) with good precision and accuracy (relative standard deviation RSD<2%). The method is based on acquiring the data using a peak jump mode and a collecting signal 10 times longer for low abundance isotopes. Uranium isotope standards U-005 to U-200 from the National Bureau of Standards (NBS) were used for method development. The optimum uranium concentration range for analysis for dissolved samples is from 50 to 200 g l^–1.     

Determination of rubidium by isotope dilution—inductively-coupled plasma mass spectrometry as an alternative to thermal ionization mass spectrometry

The combined techniques of inductively coupled plasma mass spectrometry (ICP-MS) and isotope dilution yield as much as a three-fold improvement in precision for trace-level rubidium determinations in geological materials over conventional isotope dilution using thermal ionization mass spectrometry (TIMS). Rubidium determinations by TIMS, precise to 0.6% (1 s.d.), are hindered by uncorrectable fractionation effects, whereas fractionation can be monitored during ICP-MS determinations, providing results as precise as 0.17% (1 s.d.). Precise rubidium data are critical for high-precision RbSr geochronology.     

Mass spectrometry of long-lived radionuclides

The capability of determining element concentrations at the trace and ultratrace level and isotope ratios is a main feature of inorganic mass spectrometry. The precise and accurate determination of isotope ratios of long-lived natural and artificial radionuclides is required, e.g. for their environmental monitoring and health control, for studying radionuclide migration, for age dating, for determining isotope ratios of radiogenic elements in the nuclear industry, for quality assurance and determination of the burn-up of fuel material in a nuclear power plant, for reprocessing plants, nuclear material accounting and radioactive waste control. Inorganic mass spectrometry, especially inductively coupled plasma mass spectrometry (ICP-MS) as the most important inorganic mass spectrometric technique today, possesses excellent sensitivity, precision and good accuracy for isotope ratio measurements and practically no restriction with respect to the ionization potential of the element investigated—therefore, thermal ionization mass spectrometry (TIMS), which has been used as the dominant analytical technique for precise isotope ratio measurements of long-lived radionuclides for many decades, is being replaced increasingly by ICP-MS. In the last few years instrumental progress in improving figures of merit for the determination of isotope ratio measurements of long-lived radionuclides in ICP-MS has been achieved by the application of a multiple ion collector device (MC-ICP-MS) and the introduction of the collision cell interface in order to dissociate disturbing argon-based molecular ions, to reduce the kinetic energy of ions and neutralize the disturbing noble gas ions (e.g. of ¹²⁹Xe⁺ for the determination of ¹²⁹I). The review describes the state of the art and the progress of different inorganic mass spectrometric techniques such as ICP-MS, laser ablation ICP-MS vs. TIMS, glow discharge mass spectrometry, secondary ion mass spectrometry, resonance ionization mass spectrometry and accelerator mass spectrometry for the determination of long-lived radionuclides in quite different materials.     

Isotope ratio analysis of individual sub-micrometer plutonium particles with inductively coupled plasma mass spectrometry

Information on plutonium isotope ratios in individual particles is of great importance for nuclear safeguards, nuclear forensics and so on. Although secondary ion mass spectrometry (SIMS) is successfully utilized for the analysis of individual uranium particles, the isobaric interference of americium-241 to plutonium-241 makes difficult to obtain accurate isotope ratios in individual plutonium particles. In the present work, an analytical technique by a combination of chemical separation and inductively coupled plasma mass spectrometry (ICP-MS) is developed and applied to isotope ratio analysis of individual sub-micrometer plutonium particles. The ICP-MS results for individual plutonium particles prepared from a standard reference material (NBL SRM-947) indicate that the use of a desolvation system for sample introduction improves the precision of isotope ratios. In addition, the accuracy of the ²⁴¹Pu/²³⁹Pu isotope ratio is much improved, owing to the chemical separation of plutonium and americium. In conclusion, the performance of the proposed ICP-MS technique is sufficient for the analysis of individual plutonium particles.     

The use of sector field ICP-mass spectrometry for Rb-Sr geochronological dating

Rb-Sr dating, one of the most important tools in geochronology, requires determination of the Rb/Sr concentration ratios and the 87Sr/86Sr isotope ratios in co-genetic minerals or rocks and is traditionally performed by thermal ionization mass spectrometry (TIMS). In this work we investigated whether sector field inductively coupled plasma mass spectrometry (ICP-MS), which is characterized by a high sample throughput and straight-forward sample introduction, could be used as an alternative to TIMS. To avoid spectral overlap of the ion signals of the isobaric nuclides 87Sr and 87Rb, Sr was separated from Rb by cation-exchange chromatography. A mathematical correction was applied to take into account the small amount of Rb that can be present in the Sr fraction. The isotope ratio accuracy and precision attainable with ICP-MS were evaluated by analysis of several reference materials from the US Geological Survey. The results of this evaluation show that excellent accuracy could be achieved; the internal precision (repeatability) of the isotope ratio (expressed as the relative standard deviation for 10 successive 1-min measurements) was 0.04-0.12%. An attempt was made to calculate the total or combined uncertainty on the isotope ratio results, by also taking into account other possible error sources (corrections for mass discrimination, detector dead time, blank signal and Rb fraction). Finally, the same procedure was used for dating two rock formations that were 2,500 Ma and 350 Ma old, according to age determinations previously performed by the Rb-Sr laboratory of the University of München (Germany) using TIMS. The ICP-MS results (2,520 +/- 150 Ma and 379 +/- 48 Ma) obtained for these formations compare well with the corresponding TIMS data (2,509 +/- 120 Ma and 357 +/- 25 Ma).     

Environmental application of elemental speciation analysis based on liquid or gas chromatography hyphenated to inductively coupled plasma mass spectrometry—A review

In recent years the number of environmental applications of elemental speciation analysis using inductively coupled plasma mass spectrometry (ICP-MS) as detector has increased significantly. The analytical characteristics, such as extremely low detection limits (LOD) for almost all elements, the wide linear range, the possibility for multi-elemental analysis and the possibility to apply isotope dilution mass spectrometry (IDMS) make ICP-MS an attractive tool for elemental speciation analysis. Two methodological approaches, i.e. the combination of ICP-MS with high performance liquid chromatography (HPLC) and gas chromatography (GC), dominate the field. Besides the investigation of metals and metalloids and their species (e.g. Sn, Hg, As), representing “classic” elements in environmental science, more recently other elements (e.g. P, S, Br, I) amenable to ICP-MS determination were addressed. In addition, the introduction of isotope dilution analysis and the development of isotopically labeled species-specific standards have contributed to the success of ICP-MS in the field. The aim of this review is to summarize these developments and to highlight recent trends in the environmental application of ICP-MS coupled to GC and HPLC.     

The role of sulfur and sulfur isotope dilution analysis in quantitative protein analysis

The element sulfur is almost omnipresent in all natural proteomes and plays a key role in protein quantification. Incorporated in the amino acids cysteine and methionine, it has been served as target for many protein-labeling reactions in classic quantitative proteomic approaches based on electrospray or MALDI mass spectrometry. This critical review discusses the potential and limitations of sulfur isotope dilution analysis (IDA) by inductively coupled plasma—mass spectrometry (ICP-MS) for absolute protein quantification. The development of this approach was made possible due to the improved sensitivity and accuracy of sulfur isotope ratio measurement by ICP-MS in recent years. The unique feature of ICP-MS, compound-independent ionization, enables compound (species)-unspecific sulfur IDA. This has the main advantage that only one generic sulfur standard (i.e., one isotopically labeled sulfur spike) is required to quantify each peptide or protein in a sample provided that they are completely separated in chromatography or electrophoresis and that their identities are known. The principles of this approach are illustrated with selected examples from the literature. The discussion includes also related fields of P/S and metal/S ratio measurements for the determination of phosphorylation degrees of proteins and stoichiometries in metalloproteins, respectively. Emerging new areas and future trends such as protein derivatization with metal tags for improved sensitivity of protein detection in ICP-MS are discussed. Figure The key role of sulfur in protein quantification     

Analytical plasma source mass spectrometry in biomedical research

The features of inductively coupled plasma - mass spectrometry (ICP-MS) that make it unique also make possible applications in biological chemistry and biomedical research that would be otherwise difficult or impossible. High sensitivity, characterized spectral interferences, rapid mass scanning, and individual isotope measurements are now combined with sophisticated sample preparation, separations, or stable isotope additions to achieve rapid semi-quantitative analysis, element speciation, and high accuracy. The semi-quantitative analysis of various materials, the separation and detection of macromolecules in blood and other tissues, and tracking of stable isotopes added either purposely or inadvertently to children are important applications of ICP-MS. Current functional limitations and obstacles and potential development areas also are examined.     

电感耦合等离子体质谱(ICP-MS)联用技术的应用及展望

总结了ICP-MS联用技术在国内外检测领域的最新应用,并就"分离器与ICP-MS"、"进样系统与ICP-MS"、"ICP-MS与其它仪器物理联用"等联用技术进行了分类、拓展和总结。ICP-MS联用技术的发展重点将倾向于提高分析精密度、复杂基体元素超痕量分析、同位素比值及形态研究领域,相关联用技术的国家标准或行业标准出台已迫在眉睫。     

Determination of uranium in urine – measurement of isotope ratios and quantification by use of inductively coupled plasma mass spectrometry

For analysis of uranium in urine determination of the isotope ratio and quantification were investigated by high-resolution inductively coupled plasma mass spectrometry (HR ICP-MS). The instrument used (ThermoFinniganMAT ELEMENT2) is a single-collector MS and, therefore, a stable sample-introduction system was chosen. The methodical set-up was optimized to achieve the best precision for both the isotope ratio and the total uranium concentration in the urine matrix.Three spiked urine samples from an European interlaboratory comparison were analyzed to determine the (235)U/(238)U isotope ratio. The ratio was found to be in the range 0.002116 to 0.007222, the latter being the natural uranium isotope ratio. The first ratio indicates the abundance of depleted uranium.The effect of storage conditions and the stability for the matrix urine were investigated by using "real-life" urine samples from unexposed persons in the Netherlands. For samples stored under refrigeration and acidified the results (range 0.8 to 5.3 ng L(-1) U) were in the normal fluctuation range whereas a decrease in uranium concentration was observed for samples stored at room temperature without acidification.     

土壤及蔬菜中微量汞的同位素稀释电感耦合等离子体质谱测定

建立了微波消解电感耦合等离子体质谱同位素稀释(ID/ICP-MS)测定微量汞的方法。考察了仪器参数及测量条件对汞同位素比值RHg(202Hg/200Hg)测量的影响,根据同位素比值测量误差的传递因子优化了富集同位素稀释剂(202Hg98%)的加入量,并以铊同位素比值(205Tl/203Tl)作为RHg(202Hg/200Hg)测量时发生质量歧视效应的校正因子;通过反同位素稀释法标定了富集汞同位素稀释剂的浓度。利用所建立的ID/ICP-MS方法测定了杨树叶(GBW07604)和湖积物(GBW07423)2种标准参考物中汞的含量,回收率分别为112%和100%。该方法具有准确度高、精密度好等优点,且样品前处理简便,适用于土壤及蔬菜等样品中微量及痕量汞的准确测定。     

Characterization of sealed radioactive sources: uncertainty analysis to improve detection methods

A radioactive ¹³⁷Cs source has been analyzed for the radioactive parent ¹³⁷Cs and stable decay daughter ¹³⁷Ba. The ratio of the daughter to parent atoms is used to estimate the date when Cs was purified prior to source encapsulation (an “age” since purification). The isotopes were analyzed by inductively coupled plasma mass spectrometry (ICP-MS) after chemical separation. In addition, Ba was analyzed by isotope dilution ICP-MS (ID-ICP-MS). A detailed error analysis of the mass spectrometric work has been undertaken to identify areas of improvement, as well as quantifying the effect the errors have on the “age” determined. This paper reports an uncertainty analysis to identifying areas of improvement and alternative techniques that may reduce the uncertainties. In particular, work on isotope dilution using ICP-MS for the “age” determination of sealed sources is presented. The results will be compared to the original work done using external standards to calibrate the ICP-MS instrument.     

Comparison of standard and reaction cell inductively coupled plasma mass spectrometry in the determination of chromium and selenium species by HPLC-ICP-MS

Elemental speciation is becoming a common analytical procedure for geochemical investigations. The various redox species of environmentally relevant metals can have vastly different biogeochemical properties, including sorption, solubility, bioavailability, and toxicity. The use of high performance liquid chromatography (HPLC) coupled to elemental specific detectors, such as inductively coupled plasma mass spectrometry (ICP-MS), has become one of the most important speciation methods employed. This is due to the separation versatility of HPLC and the sensitive and selective detection capabilities of ICP-MS. The current study compares standard mode ICP-MS to recently developed reaction cell (RC) ICP-MS, which has the ability to remove or reduce many common polyatomic interferences that can limit the ability of ICP-MS to quantitate certain analytes in complex matrices. Determination of chromium and selenium redox species is achieved using ion-exchange chromatography with elemental detection by standard and RC-ICP-MS, using various chromium and selenium isotopes. In this study, method performance and detection limits for the various permutations of the method (isotope monitored or ICP-MS detection mode) were found to be comparable and generally less than 1 μg L⁻¹. The method was tested on synthetic laboratory samples, surface water, groundwater, and municipal tap water matrices.