胶原矿化与仿生修复

脊椎动物硬组织（牙和骨）是通过生命系统的矿化过程形成的,其中矿化胶原是这些生物材料的基本结构单元。矿化胶原是由胶原分子与纳米磷酸钙矿物形成的有机-无机复合材料,其所特有的纳米有序多级结构赋予了生物硬组织材料优异的机械性能（如硬度和韧性）。该结构特性和矿化过程可为新型硬组织修复材料制备提供有益的启示。其中,胶原纤维内有序矿化是仿生重构的难点,也是开展硬组织修复的关键。本文综述了骨的分层结构特征、胶原分子的组装和矿化胶原的多级结构特点,胶原分子和非胶原蛋白与磷酸钙材料的相互作用,功能调控分子对胶原和矿物的界面修饰,以及胶原矿化技术在硬组织修复中的应用;指出了目前胶原矿化亟须解决的一些关键问题,如调控无定形矿物进入胶原纤维、胶原矿化速度和程度,大规模有序胶原纤维制备等。     

葡聚糖分子对氢氧化铁矿化结晶的调制作用

通过对比五种不同葡聚糖浓度的Fe3＋/葡聚糖矿化作用体系中Fe(OH)3凝胶在早期矿化阶段的成核和相变过程来研究葡聚糖对铁矿物的结晶与转化的调控作用. 运用ICP-AES(等离子发射光谱仪)观察各个矿化体系中上清液的[Fe3＋]浓度及相应pH的变化, 矿化产物运用FTIR、XRD进行表征. 结果发现, 上清液中[Fe3＋]经历了两次下降过程, 在陈化的第三天突然回增. 与不含葡聚糖的矿化作用体系很快形成结晶良好的α-FeOOH不同, 在含有葡聚糖的矿化作用体系中最初形成的物相主要为β-FeOOH. 葡聚糖分子通过与Fe3＋配位吸附在铁氧化物颗粒的表面促进了β-FeOOH转化为α-Fe2O3. 相变是经过溶解-再结晶机制进行的. [Fe3＋]第二次下降正是由于β-FeOOH转化为α-Fe2O3引起的. 葡聚糖浓度适当增大, β-FeOOH溶解加快, 有利于相变的进行. 因此葡聚糖的存在能显著影响在氢氧化铁凝胶中形成晶核的结构类型及其相变历程.     

仿生矿化的机理和应用研究进展

碳酸钙、磷酸钙为代表的生物矿物广泛分布于自然界中,经过不同的矿化过程,在生物体内呈现出多样的结构、形貌和功能,构成生物体多种组织和器官.在人工材料合成领域,仿生矿化通过调控碳酸钙、磷酸钙等矿物的成核与生长,获得具有复杂高级结构和特殊生物功能的无机或无机/有机复合材料.本文重点介绍仿生矿化机理和应用的最近研究进展,包括仿...     

三角帆蚌贝壳粉及其珍珠粉中文石的傅里叶红外光谱研究

生物成因文石与无机成因文石的红外特征峰的差异表现为文石的υ2(面外弯曲振动)谱带具有明显的频率蓝移特征[1-2],该现象归因于有机大分子对生物无机矿化过程的调控作用[3]。但对于同为生物成因的文石,在不同的软体动物双壳纲的贝壳不同壳层中,由于相应的文石质壳层的形成时间与形成条件存在差异,也将导致其红外光谱特征吸收峰的位置出现特异性[4-5]。     

盐酸胍/Ⅰ型胶原分散体系的流变性

采用胃蛋白酶降解法从猪皮中提取了胶原蛋白,用十二烷基硫酸钠-聚丙烯酰胺凝胶电泳(SDSPAGE)确定为Ⅰ型胶原;红外及紫外光谱表明胶原分子中存在三螺旋结构.分别采用小幅振荡剪切法、恒定剪切速率法及滞后环法研究了盐酸胍浓度及作用时间对Ⅰ型胶原蛋白体系流变性的影响.研究表明,随盐酸胍浓度的增大及作用时间的延长,盐酸胍/胶原分散体系由假塑性流体逐渐接近于牛顿流体.在所研究的盐酸胍浓度范围(0~6.0 mol/L)内,盐酸胍/胶原分散体系的触变性类型随盐酸胍浓度的增大发生正触变性-复合触变性-负触变性的转变;随盐酸胍作用时间的延长(6~48 h),盐酸胍浓度为1.0 mol/L的胶原分散体系的触变性类型发生复合触变性-负触变性的转变.本文的研究结果有助于加深对触变性产生机理的认识.     

盐酸胍/Ⅰ型胶原分散体系的流变性

采用胃蛋白酶降解法从猪皮中提取了胶原蛋白, 用十二烷基硫酸钠-聚丙烯酰胺凝胶电泳(SDS-PAGE)确定为Ⅰ型胶原; 红外及紫外光谱表明胶原分子中存在三螺旋结构. 分别采用小幅振荡剪切法、 恒定剪切速率法及滞后环法研究了盐酸胍浓度及作用时间对Ⅰ型胶原蛋白体系流变性的影响. 研究表明, 随盐酸胍浓度的增大及作用时间的延长, 盐酸胍/胶原分散体系由假塑性流体逐渐接近于牛顿流体. 在所研究的盐酸胍浓度范围(0~6.0 mol/L)内, 盐酸胍/胶原分散体系的触变性类型随盐酸胍浓度的增大发生正触变性-复合触变性-负触变性的转变; 随盐酸胍作用时间的延长(6~48 h), 盐酸胍浓度为1.0 mol/L的胶原分散体系的触变性类型发生复合触变性-负触变性的转变. 本文的研究结果有助于加深对触变性产生机理的认识.     

羟基磷灰石/胶原矿化机理的研究进展

仿生合成的羟基磷灰石(HAp)/胶原复合材料的结构和成分与天然骨相似,具有很好的生物相容性、生物活性和生物可降解性,有望成为新一代的骨替代材料。羟基磷灰石/胶原矿化过程其实质是晶体在自组装的胶原纤维上形成的过程,但这一过程在体内是如何进行的至今仍然不清楚。对胶原矿化机理的研究能为制备具有更优越结构和功能的新型骨替代材料提供理论参考。本文概述了羟基磷灰石/胶原矿化机理的研究进展。     

CaO-P2O5-SiO2系统溶胶-凝胶生物活性多孔材料在SBF中的性能研究

利用溶胶-凝胶生物活性材料粉末二次烧结工艺,制备了CaO-P2O5-SiO2系统溶胶-凝胶生物活性多孔材料,并利用体外实验（in vitro）方法和XRD,SEM及FTIR技术研究了此烧结材料的显微形貌、晶相、生物活性和可降解性能.结果表明,经800℃烧结5 min后,有少量硅磷酸钙[Ca5（PO4）2SiO4,5CPS]析出,在模拟体液（SBF）中浸泡,随着时间的增长,材料表面最初形成的无定形钙磷化合物矿化成碳酸羟基磷灰石（HCA）纳米团簇,并逐渐相互融合形成HCA覆盖层;HCA只在烧结体的玻璃相（SG相）表面生成,在5CPS微晶相表面未发现HCA,该材料在37℃恒温的SBF溶液中具有较高的生物活性和可降解性能.     

CaO-P2O5-SiO2系统溶胶-凝胶生物活性多孔材料在SBF中的性能研究

利用溶胶-凝胶生物活性材料粉末二次烧结工艺,制备了CaO-P2O5-SiO2系统溶胶-凝胶生物活性多孔材料,并利用体外实验(in vitro)方法和XRD,SEM及FTIR技术研究了此烧结材料的显微形貌、晶相、生物活性和可降解性能.结果表明,经800℃烧结5 min后,有少量硅磷酸钙[Ca5(PO4)2SiO4,5CPS]析出,在模拟体液(SBF)中浸泡,随着时间的增长,材料表面最初形成的无定形钙磷化合物矿化成碳酸羟基磷灰石(HCA)纳米团簇,并逐渐相互融合形成HCA覆盖层;HCA只在烧结体的玻璃相(SG相)表面生成,在5CPS微晶相表面未发现HCA,该材料在37℃恒温的SBF溶液中具有较高的生物活性和可降解性能.     

钙调素与重金属Pb2+结合反应的方波极谱与循环伏安法研究

采用方波极谱法研究了重金属Pb2+与钙调素(CaM)的结合反应, 直接检测到Pb2+-CaM配合物的存在, 并进一步利用循环伏安法研究了Pb2+-CaM的电极反应. 在pH=6.5时, 用方波极谱法在Pb2+-CaM体系中检测出2个还原峰, 峰电位分别为-0.44~-0.47 V和-0.73~-0.77 V, 说明在Pb2+-CaM体系中铅有2种存在形式, -0.44~-0.47 V的还原峰对应于游离态Pb2+, 电位更负的还原峰对应于配合物[Pb2+-CaM]. 2个还原峰的峰电流均随着cPb2+/cCaM比值增大而增大; 至cPb2+/cCaM≥10后, 配合物[Pb2+-CaM]的峰电流基本不再变化, 而游离态Pb2+的峰电流则继续增大. 利用极谱滴定曲线的拐点可判断出Pb2+在CaM中有10个结合位点. 进一步的测量结果表明, 循环伏安曲线出现游离态Pb2+的氧化峰和还原峰, 而络合态的[Pb2+-CaM]只有其还原峰, 反向电压扫描时不出现阳极波, 即没有相对应的氧化峰出现.     

Dynamic interaction between the growing Ca–P minerals and bacterial cellulose nanofibers during early biomineralization process

Bone is a composite of organic phase (collagen nanofibers) and Ca–P minerals (hydroxylapatite) and an important biological structure in the field of biomineralization, but the interaction between organic matrixes and inorganic minerals is still too ambiguous. In order to investigate the interaction between the growing Ca–P minerals and organic nanofibers during early biomineralization process, bacterial cellulose (BC) nanofibers were used as templates to mimic collagen nanofibers for Ca–P minerals deposition via biomineralization for periods from as short as 4–72 h. Our findings pointed out that the resultant Ca–P minerals formed on BC nanofibers were platelet-like calcium-deficient HAp which was analogous to those in natural bone tissue. Strikingly, we found that the growth of Ca–P minerals had influence on the structure and properties of BC nano-templates during biomineralization process.     

流化床气化炉半焦细粉的燃烧特性及其动力学研究

利用热天平研究了三种不同变质程度煤流化床气化半焦细粉的燃烧特性,考察了灰分对燃烧行为的影响,同时采用三种不同的动力学计算方法对其燃烧动力学进行了分析。研究结果表明,挥发分的存在能显著降低低阶褐煤半焦细粉的着火点;高温下半焦细粉中矿物质的分解导致其DTG曲线出现较为明显的二次峰。细粉中的灰分对其燃尽性能和综合燃烧反应性都具有一定的抑制作用。动力学分析结果表明,燃烧活化能随转化率的增加而增加;三种常用动力学分析方法中,Vyazovkin对半焦细粉的燃烧拟合效果最好。     

靛蓝胭脂红的光谱电化学研究 II. 靛蓝胭脂红复相电子转移动力学

报道了靛蓝胭脂红在SnO_2透光电极上的复相电子转移动力学参数。由光谱电化学和电化学两种实验方法测定。前一方法为单电位阶跃计时吸收法((SPS/CA)。后一方法为循环伏安法。两种方法的数据处理中均应用了计算机拟合, 较之文献中常规的工作曲线法更为简便、正确。两种方法测定的结果十分一致。进一步的研究表明, 动力学参数值与靛蓝胭脂红的浓度和溶液pH有关, 为靛蓝胭脂红在水溶液中的状态提供了重要信息。     

A spark modulator for correlation chromatography

Summary A spark modulator has been tested as an injection system for correlation gas chromatography. An air/hydrocarbon vapour mixture was used as the carrier gas. Single negative sample injections were performed using a single spark period. The experiments resulted in negative sample peaks and a positive product peak. The intensity of all peaks showed a characteristic dependence on the spark frequency and power used. Ghostpeaks were absent when a correlation experiment was performed with a high concentration of a test compound in pure air. The signal to noise ratio enhancement however, was lower than the theoretical value. More experiments are necessary to expalain this phenomenon.     

Resolution of chemical species in flow injection analysis by using self-modeling curve resolution

Mixtures can be resolved into their components by separation, spectrometric and kinetic (chemical) procedures, which have varying degrees of efficiency. Chemometric methods of data processing have proved useful for increasing resolution, especially in spectral and chromatographic procedures. This study shows that chemometric methods are also useful for kinetic flow-injection methods based on chemical reactions combined with multichannel spectral detection, where neither the reaction nor the detector provides adequate resolution. The problem of background absorbance of a sample in a flow-injection system with an ultraviolet/visible photodiode array detector is solved by applying a self-modeling curve resolution method. The example used is a mixture of methyl violet and phenolphthalein.     

化学镀Ni—Co—P合金对Mm（NiCoAiMn）5贮氢合金电极动力学性能的影响

通过电化学方法,研究了化学镀Ni-Co-P合金对Mm(NiCoAlMn)5五元稀土贮氢合金电极动力学性能的影响,研究表明,引入很少量（1－2％）Co的Ni-Co-P合金镀层可有效地提高MH电极的交换电流密度io,极限电流密度iL及α相中氢的扩散系数Dα（H）,还研究了化学镀Ni-Co-P合金对稀土贮氢合金电极循环伏安（CV）曲线和阴,阳极极化曲线及对称因子β的影响,进而阐明了化学镀对MH电极过程动力学的影响。     

Multistep growth mechanism of calcium phosphate in the earliest stage of morphology-controlled biomineralization

We studied the effect of surface-functional-group position on precipitate morphology in the earliest stage of calcium phosphate biomineralization and determined the detailed mechanism of precipitation starting from nucleation to precipitate growth. The biomineralization template was a β-sheet peptide scaffold prepared by adsorption with carboxyl groups arranged at strict 7 ? intervals. Phosphate was then introduced. Within 10 s, highly ordered embryos of calcium phosphate were formed and confined by a peptide nanofiber pattern. They repeatedly nucleated and dissolved, with the larger embryos absorbing the smaller ones in a clear demonstration of an Ostwald-ripening-like phenomenon, then aggregated in a line pattern, and finally formed highly ordered nanofibers of amorphous calcium phosphate. This multistep growth process constitutes the earliest stage of biomineralization.     

Secondary crystallization of isotactic polystyrene

When isotactic polystyrene (i-PS) is crystallized from the melt or from the glassy state at rather large supercooling an additional melting peak appears on the curve during scanning in a differential calorimeter. The overall rate of crystallization deduced from the total peak areas as a function of crystallization time did not fit the Avrami equation well. When we omit the area of the additional melting peak in the kinetic analysis a much better fit is obtained. We also observed that no lamellar thickening occurs during isothermal crystallization. In view of the low degree of crystallinity of i-PS these results lead to the idea that a secondary crystallization process takes place within the amorphous parts of the spherulites resulting in this additional melting peak on the DSC curve. The large supercooling needed and the increase in peak area with increasing molecular weight make us suppose that intercrystalline links are probably responsible for the additional melting peak of bulk-crystallized i-PS. Electron microscopic studies of surface replicas of i-PS support this view.     

Hydroxyapatite Crystal Growth on Modified Collagen I‐Templates in a Model Dual Membrane Diffusion System

The finding of proteoglycans (PG) in mineralized tissues confirms their role in the biomineralization process, but fails to give answers regarding possible detailed mechanisms of interaction. As deglycosilation of PG (especially decorin) is known to be a prerequisite for biomineralisation in vivo, glucuronic acid (GA), as a monomer common to different proteoglycans and glycosaminoglycans, and decorin were studied in mineralization experiments together with collagen type I using the dual membrane diffusion method. It was shown that under fibrillogenesis conditions glucuronic acid and decorin bind to a different extent to collagen. Binding of GA, in contrast to decorin, results in changes in both the fibril morphology and the banding pattern. The mineralization of unmodified collagen templates and of those modified with GA and decorin results in the formation of different calcium phosphate phases. Hydroxyapatite (HAP), as the thermodynamically stable product under the chosen experimental conditions, is formed only in the case of collagen modified with GA. To aid interpretation of this effect, a possible mechanism of glucuronic acid interaction with collagen by a non‐enzymatic glycation pathway is proposed and discussed. Stimulation of HAP formation is explained by the introduction of acidic GA‐carboxylate groups that allow an increase of the electrostatic binding of calcium ions compared to unmodified collagen molecules. Substrates modified in this way should subsequently serve as model templates for the mineralization process in order to make deductions about the mechanism by which acidic groups affect the biomineralization of collagen via the structure of the monomers as well as the architecture of the fibrils.     

聚醚醚酮表面的亲水改性和胶原蛋白固定化

采用紫外光接枝法对聚醚醚酮(PEEK)表面进行化学修饰和生物分子固定化.首先向PEEK表面引入亲水性的丙烯酰胺,并以此为反应位点通过戊二醛将胶原和胶原蛋白固定在PEEK表面.用接触角测定仪、扫描电镜、荧光标记和X射线光电子能谱等对改性薄膜进行了表征.结果表明,PEEK上丙烯酰胺的接枝密度高达50.9μg/cm~2;改性薄膜表面浸润性显著提高,水接触角最低降至(22±3)°.荧光标记胶原固定的PEEK薄膜荧光发射光谱强度最高,并在X射线光电子能谱中检测到N元素,表明胶原已固定化,固定胶原蛋白的浓度为10.2μg/cm~2.