一步热解法制备Cu/Fe双金属生物炭复合材料及其高效吸附Pb2+性能

使用一步热解法制备了Cu/Fe双金属生物炭复合材料(BC@Cu/Fe-X,X=3、5、10)和Fe生物炭复合材料(BC@Fe)。考察了Cu掺杂量对BC@Cu/Fe-X吸附Pb²⁺的影响,确定最佳掺杂比例。结果显示BC@Cu/Fe-5吸附Pb²⁺性能最好。考察了吸附时间、Pb²⁺浓度、p H、背景离子、空气中老化等实验条件对BC@Cu/Fe-5吸附Pb²⁺的影响。通过动力学、热力学数据拟合分析了BC@Cu/Fe-5吸附Pb²⁺的行为,利用X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、傅里叶变换红外光谱(FTIR)等表征手段解析了BC@Cu/Fe-5吸附Pb²⁺前后特征峰变化。BC@Cu/Fe-5吸附Pb²⁺的机理如下：大约42%的Pb²⁺被还原为Pb⁰,33%的Pb²⁺形成Pb O/Pb(OH)₂,25%的Pb²⁺与O—...     

γ-AlOOH/Al2O3修饰硅藻土的制备与Cs+、Pb2+吸附性能

以结晶氯化铝(AlCl₃·6H₂O)作为铝源,十二烷基苯磺酸钠(SDBS)为模板剂,采用水热法在硅藻土盘上制备了束状纳米结构γ-AlOOH/Al₂O₃复合吸附剂。采用XRD、SEM、TEM、TG/DSC、N₂吸脱附等对样品进行了表征。研究了样品对¹³³Cs⁺及Pb²⁺的吸附能力。研究表明,样品γ-AlOOH/硅藻土、γ-Al₂O₃/硅藻土,对Cs⁺及Pb²⁺均具有良好的吸附性能,两者对Cs⁺的去除率分别为98.9%和99.6%;对Pb²⁺的最大吸附量分别为357.1、416.7 mg·g^-1。两种样品对Pb²⁺的吸附均符合Langmuir吸附模型。     

Gd3+掺杂TiO2纳米复合材料的可见光响应性能

采用溶胶-凝胶技术,在钛酸四丁酯(TBOT)的水解过程中,加入硝酸钆(Gd(NO₃)₃),得到具有可见光响应活性的Gd³⁺/TiO₂复合材料。应用TEM、XRD、TG-DTA和UV-Vis等手段对纳米TiO₂复合材料进行了表征。当Gd³⁺的掺杂量为0.5%时,Gd³⁺/TiO₂复合材料在550 nm附近产生宽强吸收带。Gd³⁺进入TiO₂晶格中,形成了新的掺杂能级(E_g=1.27 eV)。适量Gd³⁺掺杂的纳米TiO₂复合材料的光催化性能优于纯TiO₂粉体材料。     

用于痕量监测Zr4+、Cr2O72-、Fe3+、HPO42-和指纹识别的功能化Eu3+/Tb3+配位聚合物荧光探针的构筑

采用芳香族π共轭及含氮原子有机连接剂,合成同构铽、铕发光配位聚合物(CPs){[Eu(PLIA)_1.5(H₂O)₂]·H₂O}_n (1)和{[Tb(PLIA)_1.5(H₂O)₂]·H₂O}_n (2),其中H₂PLIA=5-((吡啶-4-基甲基)氧基)苯-1,3-二甲酸。对合成的配合物进行了结构测定、表征和荧光痕量识别实验研究。2个同构配合物具有理想的三维框架结构,π…π堆积及氢键等弱相互作用增强了其化学稳定性;表征显示配位聚合物1和2具有良好的荧光性质、结晶性、热力学稳定性及结构完整性,可作为荧光传感的材料。1和2对水溶液中的Zr⁴⁺、Cr₂O₇^2-和Fe³⁺、HPO₄^2-具有选择性好、灵敏度高的荧光识别能力,其检出限分别为0.139 μmol·L^-1(1,Zr⁴⁺)、0.626 μmol·L^-1(1,Cr₂O₇^2-)、0.430 μmol·L^-1(2,Fe³⁺)、1.36 μmol·L^-1(2,HPO₄^2-)。探究了1和2作为探针的荧光猝灭机理。更有趣的是,1和2具有指纹识别性能,其荧光指纹纹路清晰连贯,细节明显,可被清晰观察。     

γ-AlOOH/Al2O3修饰硅藻土的制备与Cs+、Pb2+吸附性能

以结晶氯化铝(AlCl₃·6H₂O)作为铝源,十二烷基苯磺酸钠(SDBS)为模板剂,采用水热法在硅藻土盘上制备了束状纳米结构γ-AlOOH/Al₂O₃复合吸附剂。采用XRD、SEM、TEM、TG/DSC、N₂吸脱附等对样品进行了表征。研究了样品对¹³³Cs⁺及Pb²⁺的吸附能力。研究表明,样品γ-AlOOH/硅藻土、γ-Al₂O₃/硅藻土对Cs⁺及Pb²⁺均具有良好的吸附性能,两者对Cs⁺的去除率分别为98.9%和99.6%;对Pb²⁺的最大吸附量分别为357.1、416.7mg·g^-1。两种样品对Pb²⁺的吸附均符合Langmuir吸附模型。     

CaSb2O6:Bi3+,Eu3+荧光粉的制备和发光性质

采用共沉淀法及1 200 ℃后续煅烧4 h,成功制备了CaSb₂O₆:Bi³⁺,Eu³⁺荧光粉,并对其结构及发光性能进行了研究。所制备荧光粉颗粒为六边形类圆饼状,平均尺寸在100~600 nm之间。对CaSb₂O₆:Bi³⁺,Eu³⁺发光的机理分析表明,Bi³⁺对Eu³⁺的发光存在高效的敏化与能量传递。当Bi³⁺和Eu³⁺的掺杂浓度分别为0.5%和8%,Eu³⁺位于580 nm(⁵D₀→⁷F₀ )处的荧光发射显著增强,Bi³⁺,Eu³⁺共掺样品的荧光强度是CaSb₂O₆:Eu³⁺的10倍左右。调节Bi³⁺/Eu³⁺离子掺杂比,色坐标呈现了从蓝、白光到红光的变化,表明该荧光粉可分别作为蓝或红色荧光粉使用,甚至可实现从蓝、白光到红光的自由调控,这为白光LED荧光粉的发展提供了参考。     

(H2teta)2{[Ni(teta)][Fe(CN)6]2}•17H2O (teta＝5,7,7,12,14,14-Hexa-methyl-1,4,8,11-tetraazacyclotetradecane)超分子化合物的合成、晶体结构和磁性质研究

将Ni(teta)(ClO₄)₂ (teta＝5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane)的DMF溶液和K₃[Fe(CN)₆]的水溶液在填充了琼脂冻胶的U型管中通过扩散反应, 得到了标题化合物(H₂teta)₂{[Ni(teta)][Fe(CN)₆]₂}•17H₂O, 该化合物晶体属三斜晶系, 空间群P1, 晶胞参数为a＝0.9998(2) nm, b＝1.5514(3) nm, c＝1.6647(4) nm, α＝114.15(2)°, β＝100.91(2)°, γ＝93.42(2)°, V＝2.2863(10) nm³, z＝1, D_c＝1.196 g•cm^－3, F(000)＝890, μ＝5.84 cm^－1, GOF＝0.894, R₁＝0.0582, wR₂＝0.1446 [I＞2σ(I)]. 该化合物的基本单元由2个[H₂teta]^2＋阳离子、1个{[Ni(teta)][Fe(CN)₆]₂}^4－阴离子和17个水分子组成, 它们之间通过N—H…N氢键而形成具有二维平面结构的超分子化合物. 1.8～300 K变温磁化率研究表明, 化合物中三核体系Fe (s＝1/2)-Ni (s＝1)-Fe (s＝1/2)中心原子间通过氰基桥联而发生强的铁磁相互作用, 磁参数J＝4.33 cm^－1, g＝2.6, θ＝60 K. 通过TG-DTG测定了配合物的热稳定性.     

试验优化设计Er3+-Yb3+共掺杂Gd2Ti2O7上转换发光特性

采用溶胶-凝胶（Sol-gel）法制备了Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇纳米晶粉末,通过试验优化设计的理论建立了Er³⁺-Yb³⁺掺杂浓度与发光强度的回归方程,利用遗传算法优化计算出方程的最优解Er³⁺、Yb³⁺掺杂浓度分别为5.60%（物质的量分数）和13.43%。Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇纳米晶粉末为单一面心立方Gd₂Ti₂O₇相结构,随Yb³⁺共掺杂浓度增加,X射线衍射峰逐渐向高角偏移。在976 nm激光激发下,Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇获得了分别对应于Er³⁺的²H_11/2/⁴S_3/2→⁴I_15/2和⁴F_9/2→⁴I_15/2跃迁的绿色和红色上转换发光,且绿色和红色发光均为双光子吸收过程。研究了最优样品上转换发光与温度之间的关系,发现绿色上转换发光具有优良的温度传感特性,对红色上转换发光的温度猝灭进行了解释。     

[Cu(Ⅱ)(DETA)]3[Cr(CN)6]2·5H2O(DETA=二乙烯三胺)氰桥配合物的结构和磁性研究

A new coordination complex [Cu(Ⅱ)(DETA)]₃[Cr(CN)₆]₂·5H₂O (DETA=diethylenetriamine) was synthesized, its crystal structure and magnetic properties were determined. The crystal crystallizes in monoclinic space group P2₁/c, with unit cell constants a=2.056 6(7) nm, b=1.440 7(5) nm, c=1.513 3(5) nm, β=95.996(6)°, and V=4.459(3) nm³, Z=4, D_c=1.499 g·cm^-3, F(000)=2 060，μ(Mo Kα)=1.936 mm^-1, R₁=0.052 3, wR₂=0.106 2. The structure consists of a one-dimensional chain of [Cu(DETA)]₂[Cr(CN)₆]⁺ and binuclear [Cu(DETA)][Cr(CN)₆]^-. The coordination geometries around Cu²⁺ atoms are distorted square-based pyramidal and distorted square, respectively. Magnetism studies show that there are ferromagnetic interactions between Cu²⁺ and Cr³⁺ ions. CCDC: 272213.     

CaWO4:xEu3+,ySm3+,zLi+红色荧光粉的制备及光学性能

采用微波固相法制备了CaWO₄：xEu³⁺,ySm³⁺,zLi⁺红色荧光粉。测量样品的XRD图、激发谱、发射谱及发光衰减曲线,研究并分析了Eu³⁺、Sm³⁺、Li⁺的掺杂浓度,对样品微结构、光致发光特性、能量传递及能级寿命的影响。结果表明,Eu³⁺、Sm³⁺、Li⁺掺杂并未引起合成粉体改变晶相,仍为CaWO₄单一四方晶系结构。Eu³⁺、Sm³⁺共掺样品中,Sm³⁺掺杂为3%时,Sm³⁺对Eu³⁺的能量传递最有效。Li⁺掺杂起到了助熔剂和敏化剂的作用,使样品发光更强。在394 nm激发下,与CaWO₄：3%Eu³⁺样品比较,3%Eu³⁺、3%Sm³⁺共掺CaWO₄及3%Eu³⁺、3%Sm³⁺、1%Li⁺共掺CaWO₄样品的发光分别增强2倍及2.4倍。同一激发波长下,单掺Eu³⁺样品寿命最短,Sm³⁺、Eu³⁺共掺样品随Sm³⁺浓度增加,寿命先减小后增加,且掺杂了Li⁺的样品比不掺Li⁺的样品⁵D₀能级寿命有所增加。     

CO LMR spectrum of14N16O and its analysis with spectra of14N17O and14N18O

LMR spectra for v=1←0 transitions of¹⁴N¹⁶O in X²II_{1/2, 3/2} states were observed at 5.6 μm and 5.4 μm of CO laser. Introducing the advanced isotopic molecular constant scaling function to Hund’s case (a) diatomic structure model, these spectra were analyzed and fitted together with all reliable previous spectral data of¹⁴N¹⁶O as well as¹⁴N¹⁷O and¹⁴N¹⁸O. A full set of precise molecular parameters and their vibrational dependencies have been determined with much higher precision (1–2 orders for most parameters). Many of them have been obtained for the first time. Using isotopic scaling function, the molecular constants of¹⁴N¹⁷O and¹⁴N¹⁸O were deduced.     

橙红色荧光粉Ca_(1-x-y)Sm_xBi_ySiO_3的制备及其发光性能

以Sm3+作为激活剂,Bi3+作为辅助激活剂,采用水热法合成Ca1-x-ySmxBiySi O3前驱体,然后在1 100℃焙烧得到系列橙红色荧光粉。用X-射线衍射仪、扫描电镜和荧光分光光度计和傅里叶变换红外光谱等手段对样品的组成、结构和形貌及其发光性质进行分析和表征。分析结果表明:产物都为三斜晶系结构的Ca1-x-ySmxBiySi O3和四方结构的方石英Si O2共熔体。在405 nm近紫外光激发下,产物的发射光谱由3个峰组成,发射峰值位于566、606和650 nm处,分别归属于Sm3+的4G5/2→6HJ/2(J=5,7,9)跃迁。产物的激发光谱在405 nm有很强的发射带,与近紫外LED芯片匹配。随着Sm3+掺量的增加,样品发光强度先增强后减弱,当Sm3+的物质的量分数为3%时发光强度达到最大,浓度猝灭机理为电偶极-电偶极相互作用。当Bi3+的物质的量分数在0.3%~1.5%时,对产物Ca0.97Sm0.03Si O3的荧光强度起敏化作用。Sm3+和Bi3+的最佳物质的量分数分别为3%和0.5%。     

橙红色荧光粉Ca1-x-ySmxBiySiO3的制备及其发光性能

以Sm³⁺作为激活剂,Bi³⁺作为辅助激活剂,采用水热法合成Ca_1-x-ySm_xBi_ySiO₃前驱体,然后在1 100 ℃焙烧得到系列橙红色荧光粉.用X-射线衍射仪、扫描电镜和荧光分光光度计和傅里叶变换红外光谱等手段对样品的组成、结构和形貌及其发光性质进行分析和表征.分析结果表明：产物都为三斜晶系结构的Ca_1-x-ySm_xBi_ySiO₃和四方结构的方石英SiO₂共熔体.在405 nm近紫外光激发下,产物的发射光谱由3个峰组成,发射峰值位于566、606和650 nm处,分别归属于Sm³⁺的⁴G_5/2→⁶H_J/2(J=5,7,9)跃迁.产物的激发光谱在405 nm有很强的发射带,与近紫外LED芯片匹配.随着Sm³⁺掺量的增加,样品发光强度先增强后减弱,当Sm³⁺的物质的量分数为3%时发光强度达到最大,浓度猝灭机理为电偶极-电偶极相互作用.当Bi³⁺的物质的量分数在0.3%~1.5%时,对产物Ca_0.97Sm_0.03SiO₃的荧光强度起敏化作用.Sm³⁺和Bi³⁺的最佳物质的量分数分别为3%和0.5%.     

Analytical methods to determine Po and Pb in marine samples

This paper describes the methods of sampling, preconcentration, chemical separation and final count of ²¹⁰Po and ²¹⁰Pb present in different marine matrices to determine their background levels in a marine ecosystem. Complex, time consuming and selective radioanalytical methods have been used to prepare final clear sources for alpha spectrometry and beta count; in fact, gamma spectrometry, a method direct and non destructive, cannot be taken into account because the ²¹⁰Pb activity is very low which does not allow to carry out sufficiently accurate measurements and ²¹⁰Po is not a gamma emitter but it emits only alpha particle at 5.40 MeV. The results of ²¹⁰Po and ²¹⁰Pb activity concentrations obtained in different marine samples collected in the first two campaigns are still very few to discuss about the ²¹⁰Po and ²¹⁰Pb behavior in marine environment.     

Er~(3+)-Yb~(3+)双掺Li_2O-ZnO-SiO_2系透明玻璃陶瓷的制备及表征

采用熔融-晶化技术合成了Er3+-Yb3+掺杂的Li2O-ZnO-SiO2系(LZS)透明玻璃陶瓷。利用DTA,XRD,SEM,UV-Vis-NIR等对样品进行了表征,并分析了影响玻璃陶瓷析晶的因素。结果表明,LZS系玻璃具有良好的结晶性能,其最佳热处理温度为700℃,最佳热处理时间为50min,其主晶相为石英和Li8Zn10Si7O28。该玻璃陶瓷在可见光区的透过率可达85%。经SEM分析,粒子直径为30~40nm。荧光光谱显示,玻璃陶瓷的发射光谱较之基质玻璃有了极大的提高,而且在1530nm附近获得一较强发射峰。     

Luminescent properties of the potassium zinc phosphates of composition K1−xTlxZn(PO3)3

Crystalline and glassy K_1−xTl_xZn(PO₃)₃ polyphosphates have been synthesized and characterized. UV–visible spectroscopy was systematically used in order to analyze the optical properties of Tl⁺ ions both in crystalline and glassy forms with the similar compositions. The investigated polyphosphates can be considered as a model system since the spectroscopic properties of Tl⁺ ions in the glasses could be deduced by comparison with those in crystals. From structural point of view, in the crystalline forms the thallium ions are six-fold coordinated in a dissymmetrical oxygenated sites. Three luminescences (α, A_X, A_T) have been then observed and were attributed to the isolated Tl⁺ ions. In the glassy forms, an additional luminescence (D) has been detected in the low-energy range and was assigned to the Tl⁺ pairs formation. The relationship between the Tl⁺ site symmetry and its optical properties is discussed in the context of the Fukuda's model.     

Solid potassium-cation-conducting electrolytes in the K1?2xBaxFeO2 and K1?2xPbxFeO2 systems

Novel highly conductive potassium-cation solid electrolytes based on potassium monoferrite are synthesized via partial substitution of Ba²⁺ and Pb²⁺ for K⁺ and studied. Both additives lead to an abrupt increase in the conductivity of KFeO₂. In the barium-containing system, the conductivity is slightly higher and the activation energy is somewhat lower. This can be explained by the effect of dimensional factor, because the Ba²⁺ cation is larger than the Pb²⁺ cation. The reasons for the conductivity increase in potassium monoferrite upon introducing the additives are the formation of potassium vacancies in the course of substitution K⁺ → M²⁺ + V’_K and the extension of temperature range of existence of the high-temperature KFeO₂ modification. Original Russian Text ? E.I. Burmakin, G.V. Nechaev, G.Sh. Shekhtman, 2007, published in Elektrokhimiya, 2007, Vol. 43, No. 1, pp. 125–128.     

Syntheses and Structure Determination of Nine-Coordinate (NH4)3[TbIII(nta)2(H2O)]·4H2O and Eight-Coordinate (NH4)3[ErIII(nta)2] Complexes

Syntheses and structure determination of Tb^III and Er^III complexes with nitrilotriacetic acids (nta) are reported. Their crystal and molecular structures, molecular formulas, and compositions were determined by single-crystal X-ray structure analyses and elementary analyses, respectively. The crystal of the (NH₄)₃[Tb^III(nta)₂(H₂O)]·4H₂O complex belongs to the monoclinic crystal system and C2/c space group. Crystal data are as follows: a = 16.357(8) Å, b = 8.552(4) Å, c = 17.390(9) Å, β = 104.748(7)°, V = 2352.6(19) ų, Z = 4, Mr = 675.32, D_c = 1.932 g·cm⁻³, μ = 3.112 mm⁻¹, and F(000) = 1368. The final R and Rw are 0.0220 and 0.0494 for 2357 (I > 2σ(I)) unique reflections, R and Rw are 0.0266 and 0.0510 for all 5613 reflections, respectively. The Tb^IIIN₂O₇ moiety in the [Tb^III(nta)₂(H₂O)]³⁻ complex anion has a pseudo-monocapped square antiprismatic nine-coordinate structure, in which the eight coordinate atoms (two N and six O) are from two nta ligands and the water molecule is coordinated to the central Tb^III ion directly as the ninth coordinate atom. The crystal of the (NH₄)₃[Er^III(nta)₂] complex belongs to the trigonal crystal system and R-3^c space group. Crystal data are as follows: a = 7.9181(16) Å, b = 7.9181(16) Å, c = 54.27(2) Å, γ = 120°, V = 2946.7(14) ų, Z = 6, Mr = 597.61, D _c = 2.021 g·cm⁻³, μ = 4.345 mm⁻¹, and F(000) = 1770. The final R and Rw are 0.0295 and 0.0673 for 677 (I > 2σ(I)) unique reflections, R and Rw are 0.0366 and 0.0700 for all 4827 reflections, respectively. The Er^IIIN₂O₆ part in the [Er^III(nta)₂]³⁻ complex anion is an eight-coordinate structure with a pseudo-dicapped octahedron, in which the eight coordinate atoms (two N and six O) are from two nta ligands.Original Russian Text Copyright © 2004 by J. Wang, X. D. Zhang, Y. Wang, Y. Zhang, Z. R. Liu, J. Tong, and P. L. Kang__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 6, pp. 1067–1075, November–December, 2004.     

Studies of mixed silica/alumina and silica/boric oxide materials

Multinuclear low temperature solution NMR and FTIR has been used to monitor the hydrolysis and polymerisation chemistry involved in the preparation of multicomponent silica/alumina and silica/boric oxide monolithic gels. Pre-hydrolysis of the silicon component (tetraethylorthosilicate) in the presence of low levels of water is an important factor in obtaining transparent materials. In order to obtain high homogeneity and minimise the subsequent precipitation of the fastest hydrolysing component, ethylacetonate (etac) has been used to modify the aluminum alkoxides. Solid state nmr and FTIR studies show that the borosilicate system contains Si-O-B bonds during the early stages of polymerisation but they are absent on final gelation. Thermal treatment to around 500°C is required to generate mixed Si-O-B bonds. Length of prehydrolysis has little affect on the nature of the Si-O-B gel materials but has a significant effect on the chemical nature of Si-O-Al materials. Longer silicon alkoxide prehydrolysis times lead to better defined materials.formerly Carole C. Perry.formerly at Chemistry Department, Brunel University, Uxbridge, Middlesex. UB8 3PH UK.     

钙钛矿结构荧光材料MZrO3:Eu3+,A (M=Ca2+, Ba2+; A=Li+, Na+, K+)的制备及其发光性质

Calcium and barium zirconate powders based upon CaZrO₃:Eu³⁺,A and BaZrO₃:Eu³⁺,A (A=Li⁺, Na⁺, K⁺) were prepared by combustion synthesis method and heating to ~1000℃ to improve crystallinity.The structure and morphology of materials were examined by X-ray diffraction (XRD) and scanningelectron microscopy (SEM). XRD results showed that CaZrO₃:Eu³⁺,A and BaZrO₃:Eu³⁺,A (A=Li⁺, Na⁺, K⁺) perovskites possessed orthorhombic and cubic structures, respectively. The morphologies of all powderswere very similar consisting of small, coagulated, cubical particles with narrow size distributions andsmooth and regular surfaces. The characteristic luminescences of Eu³⁺ ions in CaZrO₃:Eu³⁺,A (A=Li⁺, Na⁺, K⁺) lattices were present with strong emissions at 614 and 625 nm for ⁵D₀→⁷F₂ transitions with other weakeremissions observed at 575, 592, 655, and 701 nm corresponding to ⁵D₀→⁷F_n transitions (where n=0, 1, 3, 4 respectively). In BaZrO₃:Eu³⁺ both the ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transitions at 595 and 613 nm were strong.Photoluminescence intensities of CaZrO₃:Eu³⁺ samples were higher than those of BaZrO₃:Eu³⁺ lattices. Thisremarkable increase of photoluminescence intensity (corresponding to ⁵D₀→⁷F_n transitions) was observedin CaZrO₃:Eu³⁺ and BaZrO₃:Eu³⁺ if co-doped with Li⁺ ions. An additional broad band composed of manypeaks between 440 to 575 nm was observed in BaZrO₃:Eu³⁺,,A samples. The intensity of this band wasgreatest in Li⁺ co-doped samples and lowest for K⁺ doped samples.