超临界流体萃取-高效液相色谱离线联用分析灵芝中三萜类化合物

在系统考察压力、温度和时间对萃取率影响的基础上,利用超临界流体萃取技术提取了灵芝子实体中的三萜类化合物。其最佳萃取条件为:压力15 MPa,温度35℃,动态萃取时间120 m in,CO2流量1 mL/m in,背压阀温度50℃。此外,还建立了高效液相色谱梯度洗脱分离三萜类化合物的方法。通过比较超临界流体提取物和甲醇提取物的色谱图,发现两者具有相似的峰形,说明超临界流体能够达到与甲醇相近的萃取效果,可以取代甲醇作为新一代的绿色萃取溶剂。     

超临界CO_2萃取桑叶总黄酮工艺的研究

采用超临界CO2萃取桑叶总黄酮,以得率为指标,对萃取压力、萃取温度、夹带剂乙醇的浓度和流量等影响因素进行正交试验。结果表明最佳工艺条件为:萃取压力35 MPa,温度55℃,乙醇质量分数90%,乙醇流量0.01 mL/min。此条件下桑叶总黄酮得率2.28%。该方法简便、可靠、选择性高,适于工业化生产。     

超临界CO2萃取柚子叶挥发油的研究及GC-MS分析

采用超临界CO2萃取技术提取柚子叶的挥发性成分,以挥发油得率为衡量工艺参数的指标,通过正交试验法考察超临界CO2萃取过程中萃取温度、萃取压力、CO2的流量及萃取时间4个因素对柚子叶挥发油得率的影响。结果表明20MPa、萃取温度45℃、CO2流量7kg·h-1、萃取时间120min为最佳工艺。通过GC-MS对挥发油进行分析,从柚子叶挥发油中分离出144个组分,鉴定了61种成分,占化合物检出总量的90.4%。     

采用超临界CO_2萃取技术提取废次烟叶中的茄尼醇

采用超临界CO2萃取技术提取废次烟叶中的有效成分茄尼醇,以乙醇为夹带剂,研究了萃取压力、萃取温度、CO2的流量、萃取时间、夹带剂的使用、分离温度和原料粒度等方面对萃取效果的影响,并对其中影响较为显著的因素进行了正交试验,通过极差和方差分析确定了萃取体系适宜的工艺条件。萃取压力为20 MPa,萃取温度为45℃,CO2的流量为15 L/h,萃取时间为2 h,夹带剂为95%的乙醇,分离温度为40℃,原料粒度为40~60目。     

醌类化合物的超临界流体萃取研究进展

综述了国内近20年来超临界流体萃取技术应用于醌类化合物分离的研究进展,重点介绍了超临界流体萃取技术在中草药中醌类化合物的分析测定方面的应用,分析了影响醌类成分提取效果的主要因素,优化萃取温度和萃取压力能够改善琨类化合物的分离效果,夹带剂的使用则有效地提高了超临界流体的萃取能力。     

白术挥发性成分的超临界流体萃取及其分析

采用超临界流体萃取白术挥发油成分,对萃取条件进行优化,并用气相色谱、气相色谱－质谱分析鉴定出超临界流体萃了的挥发油中22个化合物。最佳的超临界流体萃取条件为压力22.0MPa,温度60℃,0.5mL乙醇作改性,先静态萃取10min(CO2用量2.0mL),再动态萃取40min(CO2流速为0.3mL/min)。将超临界流体萃取与水蒸气蒸馏进行对比,水蒸气蒸馏5h的油收率仅为超临界流体萃取1h油收率的10.32%,证明超临界流体萃取替代传统萃取的必要性。     

超临界CO2萃取异甘草素的提取工艺

采用正交试验与单因素试验相结合方法对异甘草素的超临界CO2提取工艺进行了研究,并与常规索氏提取法的实验结果进行了对比。得到的最佳工艺参数为:萃取压力30 MPa、萃取温度45℃、夹带剂85％乙醇、液固比为5:1、CO2流量10 kg／h、分离压力5．5 MPa、分离温度35℃。实验结果表明,在优化的条件下,超临界CO2萃取异甘草素的提取率为0．035％,异甘草素在提取物中的质量分数为0．84％,分别是索氏提取法提取率的3．5倍,质量分数的3．0倍。超临界CO2萃取异甘草素所用时间短、溶剂用量少、提取效率高、环境友好,是一种高效、快速提取异甘草素的方法。     

十二烷基苯磺酸钠-超临界二氧化碳萃取槐花总黄酮的工艺研究

在单因素试验的基础上,以槐花总黄酮提取率为评价指标,进行了L9(34)正交优化实验,考察了表面活性剂十二烷基苯磺酸钠(SDBS)对超临界CO2萃取槐花总黄酮提取率的影响,确定了槐花总黄酮的优化提取工艺.结果表明,引入十二烷基苯磺酸钠使得槐花总黄酮的提取率提高了93.7%.槐花总黄酮的优化提取工艺为:萃取温度50℃,萃取压力35MPa,SDBS质量分数为2%,夹带剂乙醇体积分数75%.     

复叶槭挥发物的超临界CO2萃取及其TCT/GC-MS分析

采用超临界CO2流体技术萃取复叶槭枝条挥发物,对萃取材料和萃取条件进行优化,并用热脱附／气相色谱-质谱（TCT／GC-Ms）技术分析鉴定萃取所得的挥发性组分,结果显示,萃取剪断的材料所获得的挥发物的相对强度比未剪断的多;最佳的萃取温度和压力分别为35℃和20MPa。当萃取时间为15～60min时,醇、醛、酯、萜烯等类化合物均可获得较高的萃取效率,但其峰值出现的时间各不相同。     

薤白挥发油成分的超临界CO2萃取及GC-MS分析

采取超临界CO2萃取和水蒸气蒸馏两种方法提取薤白中的挥发油,比较了两种提取方法得到的挥发油的理化性质,并利用GC-MS对它们进行了定性、定量分析。两种方法的主要提取物均为含硫化合物,但超临界CO2萃取法得到的含硫化合物的数量和质量都高于水蒸气蒸馏法得到的提取物。采用水蒸气蒸馏法提取8 h得到的萃取率为1.72%。通过设计的超临界CO2萃取的正交实验,得到了最佳萃取工艺条件为:压力25 MPa,温度40℃,CO2流量为25L/h。最佳萃取时间为120 min,萃取率为4.41%,是水蒸气蒸馏法萃取率的2.8倍。实验结果表明,超临界CO2萃取法简单易行,可以较快速、有效地提取薤白中的挥发油。     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

化学计量中不确定度评定研究进展

测量不确定度是表征合理地赋予被测量之值的分散性的参数。本文针对化学计量不确定度评定基础模型仅适用于线性模型、概率分布为正态分布或缩放位移t分布等局限,介绍了近年来不确定度评定的研究热点:蒙特卡罗方法(Monte Carlo Method,MCM),不确定度评定的来源、评定概念、评估方法及其发展过程,扩大了测量不确定度评定与表示的适用范围。     

微量钙的测定方法研究进展

介绍了1995-2006年期间测定微量和痕量钙的方法,如电感耦合等离子体-原子发射光谱法、原子吸收光谱法以及离子色谱法等的工作原理和特点,并说明了其测定微量钙的应用领域。并对微量钙的测定技术进行了展望(引用文献55篇)。     

Stages of thermal decomposition of sodium oxo-salts of sulphur

Thermal behaviour of sodium oxo-salts of sulphur: Na₂SO₄, Na₂S₂O₇, Na₂S₂O₆, Na₂SO₃, Na₂S₂O₅, Na₂S₂O₄, Na₂S₂O₃, Na₂S₃O₆ and of sulphides Na₂S and Na₂S₂ was studied on heating up to 1000°C. The experiments were performed with anhydrous compounds obtained from commercial products by recrystallisation and dehydration. The stage mechanisms of decomposition of anionic sub-lattices of the salts have been proposed basing on the Górski’s morphological classification of simple species. The thermal stability and the stage decomposition mechanisms were correlated with the structure and the potential chemical properties of the salt anions. The thermal decomposition processes were studied by means of thermal analysis, and the decomposition products were identified by means of X-ray phase analysis.