经γ射线辐照的LLDPE与氢氧化铝体系冲击性能的研究

研究了γ射线剂量率对线性低密度聚乙烯（ＬＬＤＰＥ）氧化与降解的影响和ＬＬＤＰＥ／γ－ＬＬＤＰＥ／ＡＴＨ（氢氧化铝）体系的冲击性能。结果表明，剂量率越低，ＬＬＤＰＥ氧化和降解的程度越高。γ－ＬＬＤＰＥ的加入可明显改善ＬＬＤＰＥ和ＡＴＨ的相容性，提高ＬＬＤＰＥ／ＡＴＨ体系的冲击强度，改善ＡＴＨ在ＬＬＤＰＥ树脂相中的分散性。     

LLDPE／EAA共混体系结晶行为及相容性

通过ＤＭＡ、ＤＳＣ、偏光显微镜（ＰＬＭ）、ＷＡＸＤ及力学性能测试等方法，对线性低密度聚乙烯（ＬＬＤＰＥ）／乙烯－丙烯酸共聚物（ＥＡＡ）共混体系的研究表明，ＬＬＤＰＥ与ＥＡＡ的非晶相可部分相容，结晶相不能形成共晶；共混物结晶时，两组分相互影响，ＬＬＤＰＥ的结晶速度高于ＥＡＡ，两者结晶没有进入对方晶胞中．还发现ＬＬＤＰＥ与ＥＡＡ力学性能上相容．低含量ＥＡＡ共混体系显示出较佳的力学性能．     

由A_2, B_2和BB’_2型单体合成超支化共聚物──Ⅳ.N-乙基乙二胺、4,4’-三亚甲基二哌啶与二乙烯基砜的共聚反应

将二官能度单体（Ａ_２）和三官能度单体（ＢＢ’２）反应合成超支化聚合物的方法推广应用于共聚反应．用Ａ２——二乙烯基砜（ＤＶ）,Ｂ２——４,４’－三亚甲基二哌啶（ＴＭ ＤＰ）和ＢＢ’２——Ｎ－乙基乙二胺（ＮＤＡ）单体直接反应合成了超支化共聚物．聚合反应时,ＴＭＤＰ和ＮＤＡ的仲胺基与ＤＶ的双键迅速加成,生成一种带有双键和伯胺基的ＡＢ’２型中间体,该中间体进一步聚合得到超支化聚砜胺．用Ｆｏｕｒｉｅｒ变换红外光谱（ＦＴＩＲ）,色－质联用谱（ＬＣ／ＭＳＤ）等测试手段验证了这一反应机理．产物的支化度随着ＴＭＤＰ与ＮＤＡ的加料比增大而减小,因而可通过这种共聚合方法来控制超支化聚合物的支化度．当ＴＭＤＰ与ＮＤＡ的加料比大于或等于４时,产物是半结晶的．     

1,3—戊二烯／苯乙烯阳离子共聚合反应

本文研究了以甲苯为溶剂,ＡｌＣｌ３和ＢＦ３·ＯＥｔ２为引发剂,１,３－戊二烯（ＰＤ）与苯乙烯（Ｓｔ）的阳离子共聚合反应,并用红外光谱测定聚合物的微观结构。由共聚单体ＰＤ和Ｓｔ加入顺序的不同可生成无规共聚物Ｐ（ＰＤ－ｃｏ－Ｓｔ）和接枝共聚物Ｐ（ＰＤ－ｇ－Ｓｔ）和Ｐ（Ｓｔ－ｇ－ＰＤ）。无论是由ＡｌＣｌ３引发聚合反应,还是由ＢＦ３·ＯＥｔ２引发聚合反应,Ｓｔ上的碳阳离子的活性都高于ＰＤ上碳阳离子的活性。由ＡｌＣｌ３首先引发ＰＤ进行聚合反应,结束后再引入Ｓｔ时,聚合体系不能引发Ｓｔ聚合反应;相反ＡｌＣｌ３首先引发Ｓｔ聚合后的体系能继续引发ＰＤ的聚合反应。ＢＦ３·ＯＥｔ２无论先引发Ｓｔ或是ＰＤ,都能在聚合反应完成后接着引发另一单体而生成接枝共聚物Ｐ（ＰＤ－ｇ－Ｓｔ）和Ｐ（Ｓｔ－ｇ－ＰＤ）。二苯醚与烯丙基氯的加入,提高了碳阳离子的稳定性,增加了聚合物的分子量,但降低了碳阳离子的活性,使得聚合反应的产率降低,同时对Ｓｔ和ＰＤ碳阳离子的活性次序无明显影响     

GMA熔融接枝EPDM的研究

以甲基丙烯酸缩水甘油酯（ＧＭＡ）为接枝单体，过氧化二异丙苯（ＤＣＰ）为引发剂，对三元乙丙胶（ＥＰＤＭ）进行了熔融接枝，在烃链上引入极性基团，以改善ＥＰＤＭ与极性聚合物的相容性。用差示扫描量热计（ＤＳＣ）研究了ＧＭＡ的聚合温度，用富里叶红外（ＦＴ－ＩＲ）、凝胶渗透色谱（ＧＰＣ）对接枝产物进行了表征。实验结果表明，产物的接枝率和凝胶量可以通过反应条件（温度、时间、反应物组成及加料方式）来控制。     

STUDIES ON THE STATE OF PALLADIUM AND HYDROGENATION ACTIVITY OF RESIN SUPPORTED PALLADIUM──TIN OXIDE CATALYSTS

ＳＴＵＤＩＥＳＯＮＴＨＥＳＴＡＴＥＯＦＰＡＬＬＡＤＩＵＭＡＮＤＨＹＤＲＯＧＥＮＡＴＩＯＮ　ＡＣＴＩＶＩＴＹＯＦＲＥＳＩＮＳＵＰＰＯＲＴＥＤＰＡＬＬＡＤＩＵＭ──ＴＩＮＯＸＩＤＥＣＡＴＡＬＹＳＴＳＨｕＷｅｉｂｉｎｇ（ＨｕｂｅｉＩｎｓｔｉｔｕｔｅｆｏｒＮ...     

热可逆共价交联反应及其研究进展

梗概评述了环戊二烯（ＣＰＤ）与双环戊二烯（ＤＣＰＤ）之间Ｄｉｅｌｓ－Ａｌｄｅｒ反应的特点,以及将其引作大分子间交联键的思路;以此为基础详细讨论了热可逆共价交联聚合物的分析方法。制备路线,以及利用这一反应目前所达到的研究水平和成就 。     

化学交联聚氯乙烯树脂的合成和结构

研究了氯乙烯／交联单体悬浮共聚时,交联单体种类,浓度和聚合温度对化学交联聚氯乙烯树脂结构的影响。对于氯乙烯／邻苯二甲酸二烯丙基酯（ＶＣ／ＤＡＰ）悬浮共聚体系,凝胶含量和凝胶交联密度随ＤＡＰ起始浓度的增加而增大;ＤＡＰ浓度相同时,凝胶含量和凝胶交联密度随聚合温度上升而下降;     

LLDPE／LDPE共混体系的相容性与性能

ＬＬＤＰＥ／ＬＤＰＥ共混体系的相容性与性能杨毓华，花荣，白春霞，于旻李三喜，葛铁军（中国科学院长春应用化学研究所长春１３００２２）（沈阳化工学院高分子系沈阳）关键词ＤＳＣ，ＷＡＸＤ，力学性能，ＬＬＤＰＥ，ＬＤＰＥ，共混，相容性非晶－非晶－结晶共混体系...     

用锥形量热仪研究聚乙烯膨胀阻燃体系的燃烧性

利用锥形量热仪在５０ｋＷ·ｍ６－２热辐照条件下,研究了含淀粉线性低密度聚乙烯（ＬＬＤＰＥ）燃烧性,获得了最大热释放速率、总热释放、有铲燃烧热、最大烟产生叫烟释放量及质量损失速率等参数,实验结果淀粉膨胀阻燃剂能明显降低ＬＬＤＰＥ的热释放速率,总热释放和有效燃烧热,淀粉作为膨胀型阻燃剂中的成炭剂,可以部分代替季戊四醇,而对热释放速率影响不大,达到阻燃和降低成本的目的,该膨胀体系使烟释放变得缓慢,但总烟     

可生物降解聚酯的合成和交联产物性质研究(英)

由丙三醇、丙交酯和反丁烯二酸制得一含碳碳双健的低分子量聚酯。该聚酯由于存在不饱和键,可热引发或引发剂引发交联,可望成为环境友好材料或生物降解复合材料领域的一个有用的热固性树脂。     

Chemical upcycling of poly(lactide) plastic waste to lactate ester,lactide and new poly(lactide) under Mg-catalysis condition

Chemical upcycling of end-of-life poly(lactide) plastics to lactide, lactate ester and new poly(lactide) has been achieved by using magnesium bis[bis(trimethylsilyl)amide] [Mg(HMDS)₂] as promoter. Mg(HMDS)₂ showed high efficiency in l-lactide polymerization and poly(lactide) depolymerization. Mg(HMDS)₂/Ph₂CHOH catalytic system displayed high ring-opening selectivity and the characteristic of immortal polymerization. Taking advantage of transesterification, depolymerizations of end-of-life poly(lactide) plastics to lactate ester (polymer to value-added chemicals) and lactide (polymer to monomer) were achieved with high yields. Besides, a new “depolymerization-repolymerization” strategy was proposed to directly transform poly(lactide) into new poly(lactide). This work provides a theoretical basis for the design of polymerization and depolymerization catalysts and promotes the development of degradable polymers.     

Miscibility and phase structure of binary blends of polylactide and poly(methyl methacrylate)

Blends of amorphous poly(DL‐lactide) (DL‐PLA) and crystalline poly(L‐lactide) (PLLA) with poly(methyl methacrylate) (PMMA) were prepared by both solution/precipitation and solution‐casting film methods. The miscibility, crystallization behavior, and component interaction of these blends were examined by differential scanning calorimetry. Only one glass‐transition temperature (T_g) was found in the DL‐PLA/PMMA solution/precipitation blends, indicating miscibility in this system. Two isolated T_g's appeared in the DL‐PLA/PMMA solution‐casting film blends, suggesting two segregated phases in the blend system, but evidence showed that two components were partially miscible. In the PLLA/PMMA blend, the crystallization of PLLA was greatly restricted by amorphous PMMA. Once the thermal history of the blend was destroyed, PLLA and PMMA were miscible. The T_g composition relationship for both DL‐PLA/PMMA and PLLA/PMMA miscible systems obeyed the Gordon–Taylor equation. Experiment results indicated that there is no more favorable trend of DL‐PLA to form miscible blends with PMMA than PLLA when PLLA is in the amorphous state. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 23–30, 2003     

Mechanism of high thermal stability of commercial polyesters and polyethers conjugated with bio‐based caffeic acid

In previous report, we discovered that a novel improvement technique to enhance the thermal properties of poly(L ‐lactide)s (PLLAs) by terminal conjugation with 3,4‐diacetoxycinnamic acid (DACA). In this study, we clarified the mechanism of the enhancement of thermal stability by using commercial polyesters and polyethers. The effect of thermal improvement by the terminal conjugation of DACA on poly(DL ‐lactide), poly(ε‐caprolactone), and poly(ethylene glycol) was almost the same as about 100 °C increase. The amount of residual tin catalyst, which enhances the thermal degradation of polyesters, was reduced at undetected level after the terminal conjugation of DACA probably due to the removal of tin during DACA conjugation process. Furthermore, the π‐π stacking interactions of DACA units and the chemical protection of terminal hydroxyl groups, which enhances intramolecular scission, were also important for the high thermal stability. We clarified that the extreme high thermal stability by DACA conjugation was induced by these above mechanisms. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A Strategy for Control of "Random" Copolymerization of Lactide and Glycolide: Application to Synthesis of PEG-b-PLGA Block Polymers Having Narrow Dispersity

Poly(lactic-co-glycolic acid) (PLGA) is a biodegradable copolymer that is also acceptable for use in a variety of biomedical applications. Typically, a random PLGA polymer is synthesized in a bulk batch polymerization using a tin-based catalyst at high temperatures. This methodology results in relatively broad polydispersity indexes (PDIs) due to transesterification, and the polymer product is often discolored. We report here the use of 1,8-diazabicyclo[5.4.0]-undec-7-ene (DBU), a known, effective, and convenient organocatalyst for the ring-opening polymerization of cyclic esters, to synthesize random copolymers of lactide and glycolide. The polymerization kinetics of the homo- and copolymerizations of lactide and glycolide were explored via NMR spectroscopy. A novel strategy that employs a controlled addition of the more reactive glycolide monomer to a solution containing the lactide monomer, the poly(ethylene glycol) (PEG) macroinitiator, and DBU catalyst was developed. Using this tactic (semi-batch polymerization), we synthesized a series of block copolymers that exhibited excellent correlation of the expected and observed molecular weights and possessed narrow PDIs. We also measured the thermal properties of these block copolymers and observed trends based on the composition of the block copolymer. We also explored the need for experimental rigor in several aspects of the preparations and have identified a set of convenient reaction conditions that provide polymer products that retain the aforementioned desirable characteristics. These polymerizations proceed rapidly at room temperature and without the need for tin-based catalysts to provide PEG-b-PLGAs suitable for use in biomedical investigations.     

Control of thermal properties and hydrolytic degradation in poly(lactic acid) polymer stars through control of isospecificity of polymer arms

The synthesis of a family of polymer stars with arms of varied tacticities is discussed. The effect of polymer tacticity on the physical properties of these polymer stars is dramatic. Dipentaerythritol cores support six poly(lactic acid) arms. Lewis acidic tin and/or aluminum catalysts control the polymerization to afford polymer stars of variable tacticity. Analysis of these polymers by ¹H NMR spectroscopy, thermogravimetric analysis, powder X‐ray diffraction, and differential scanning calorimetry reveals the effects of tacticity control on the physical properties of the polymer stars. Hydrolytic decomposition studies suggest that the degradation profile of a polymer star may also be tuned by stereochemical control. Differences between isotactic samples derived from rac‐lactide and L ‐lactide are heightened by longer arms of 50 and 100 monomer units. Control of polymer isospecificity shows that a ～70% isotacticity bias is necessary to induce crystallinity and alter the thermal and degradation properties of the material. Above 70% isotacticity, the degradation properties and thermal transitions can be further tuned across a relatively wide range. This technique allows for significant tunability to the physical properties of aliphatic polyester polymer stars. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Highly biodegradable copolymers composed of chiral depsipeptide and L‐lactide units with favorable physical properties

Syntheses of copolymers composed of optically active depsipeptides (3,6‐dimethyl‐2,5‐morphorinedione) and L ‐lactide—poly(L ‐3,L ‐6‐dimethyl‐2,5‐morphorinedione‐co‐L ‐lactide), poly(L ‐3,DL ‐6‐dimethyl‐2,5‐morphorinedione‐co‐L ‐lactide), and poly(L ‐3,D ‐6‐dimethyl‐2,5‐morphorinedione‐co‐L ‐lactide)—were examined in an effort to improve the biodegradability and physical properties of homopoly(L ‐lactide). In degradation tests, the copolymers composed of 3,6‐dimethyl‐2,5‐morphorinedione and lactide in the ratios 10/90 to 13/87 exhibited high biodegradability toward proteinase K, whereas a homopolymer, poly(L ‐lactide), exhibited very poor biodegradability (only 50% after 200 h). These polymers composed of 3,6‐dimethyl‐2,5‐morphorinedione/L ‐lactide in 11/89 to 13/87 ratios also degrades rapidly after being in compost for 30 days. The resulting copolymers, however, showed relatively low elongation properties. Therefore, ternary copolymerizations of L ‐3,DL ‐6‐dimethyl‐2,5‐morphorinedione, ?‐caprolactone, and L ‐lactide were explored in an effort to improve their mechanical properties, especially the elongation, and sufficient results were obtained with an approximate ratio of 3/11/86. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 302–316, 2002     

Aluminum complex initiated copolymerization of lactones and DL‐lactide to form crystalline gradient block copolymers containing stereoblock lactyl chains

The homopolymerization reactions of several lactones, as well as the copolymerization reactions of DL‐lactide with these lactones were investigated using tridentate Schiff base aluminum complexes as the initiators. ε‐Caprolactone and δ‐valerolactone polymerized efficiently at room temperature to afford polyesters, whereas β‐butyrolactone only gave the corresponding oligomer. The copolymerization reactions of DL‐lactide with caprolactone and valerolactone yielded gradient block copolymers where the lactyl blocks formed crystalline stereoblocks as a consequence of the stereoselective polymerization of DL‐lactide in the presence of the aluminum complexes. These polymerization processes were highly controlled in nature, and block copolymerization where caprolactone copolymerized using poly(DL‐lactide)‐Al complex proceeded. The obtained gradient copolymer containing stereoblock lactyl blocks and caproyl blocks were analyzed using WAXD analysis to uncover existence of the crystalline stereoblock lactyl blocks in the copolymer. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2536–2544     

Synthesis and characterization of polytulipalin‐g‐polylactide copolymers

Graft copolymers of poly(tulipalin A) (PT) and poly(DL‐lactide) (PDLLA) (PT‐g‐PDLLA) having various graft lengths and ratios were synthesized by free‐radical copolymerization of α‐methylene‐γ‐butyrolactone (MBL) and PDLLA macromonomers (HEMA‐PDLLA) terminated by 2‐hydroxyethyl methacrylate (HEMA)‐terminated. HEMA‐PDLLA were synthesized by ring opening polymerization (ROP) of DL‐lactide in the presence of HEMA. Both HEMA‐PDLLA and the copolymers were characterized by NMR spectroscopy and gel permeation chromatography (GPC). The thermal properties of the graft copolymers were found to depend on the graft length and the ratio. The copolymers consisting of PDLLA side chains of M_n = 500 Da showed a single T_g between T_gs of the two component polymers, suggesting a miscible state of PT and PDLLA. In contrast, the copolymers consisting of PDLLA side chains of M_n = 1100, 2000, and 7000 Da showed two isolated T_g, suggesting two segregated domains. The AFM phase images of the copolymers supported the single and phase‐separated morphologies for the former and latter systems, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Bulk and surface modifications of polylactide

This article reviews various methods of modifying the bulk and surface properties of poly(lactic acid) (PLA) so that the polymer may be used as a drug carrier in a drug delivery system (DDS) and as a cell scaffold in tissue engineering. Copolymerization of lactide with other lactone-type monomers or monomers with functional groups such as malic acid, copolymerization of lactide with macromolecular monomer such as poly(ethylene glycol) (PEG) or dextran, as well as blending polylactide and natural derivatives and other methods of bulk modification are discussed. Surface modifications of PLA-type copolymers, such as surface coating, chemical modification, and plasma treatment are described. Cell culture technology proves the efficiency of bulk and surface modification and the potential application of PLA in tissue engineering.