右旋邻氯扁桃酸分子印迹聚合物的制备及结合特性研究

以右旋邻氯扁桃酸为模板分子合成了具有高选择性的分子印迹聚合物作为手性分离材料 .紫外光谱研究说明在聚合开始之前模板分子与功能单体形成了配合物 ,并用Hyperchem软件模拟其分子结构 ,结合能分别为 -1 643 7× 1 0 4 J·mol- 1 和 -4 2 799× 1 0 4 J·mol- 1 .分子印迹聚合物对模板分子的结合量高于其它类似物 ,手性分离因子α达 1 76.Scatchard分析表明分子印迹聚合物在识别右旋邻氯扁桃酸分子过程中存在两类结合位点 ,与配合物模拟结构数目一致     

分子印迹薄层色谱手性固定相的制备及其色谱性能

分别以右旋扁桃酸、右旋邻氯扁桃酸和右旋对氯扁桃酸为模板,丙烯酰胺、乙二醇二甲基丙烯酸酯为功能单体和交联剂合成分子印迹聚合物，并以此作为薄层色谱手性固定相。研究了模板分子消旋体在手性固定相上的分离情况,并讨论了展开剂中乙酸含量对分离的影响。在乙腈-5%乙酸展开体系中扁桃酸、邻氯扁桃酸和对氯扁桃酸消旋体得到较好的分离,分离因子分别为1.45,1.62和1.56。该手性固定相对模板分子的结构类似物也具有一定的手性交叉分离能力。讨论了分析物的化学结构对该手性固定相识别性能的影响。该方法为快速、灵敏地对手性物质分析、定性提供了一条简便的途径。     

大黄酸分子印迹聚合物微球的制备及特性

以聚苯乙烯微球为种球,大黄酸为模板分子,采用单步溶胀聚合法在N,N-二甲基甲酰胺体系中制备了单分散分子印迹聚合物微球.用扫描电镜对微球的结构和形貌进行了表征,并研究了微球的制备条件和吸附特性.微球的凹槽可有效地增加微球的比表面积和结合位点,从而提高了模板分子的结合速率及微球的印迹容量.     

甲醛分子印迹聚合物微球的制备及其在针式萃取-气相色谱联用技术中的应用

本研究选用甲醛为印迹分子,4-乙烯基吡啶为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用矿物油包被悬浮聚合法制备高选择性识别的分子印迹聚合物.与本体聚合法相比,此法很好地保护了聚合物的印迹位点,得到的微球形状规则.利用制备的聚合物微球作为吸附剂填充针式萃取装置,并与气相色谱联用分析了气体中的痕量甲醛.实验考察了一系列聚合...     

以混旋邻氯扁桃酸为模板的分子印迹聚合物的制备及拆分性能研究

以混旋邻氯扁桃酸为模板分子和合成的(S)-(1-萘乙基)-丙烯酰胺为手性功能 单体制备分子印迹聚合物作为色谱固定相，对混旋邻氯扁桃酸有较好的拆分能力， 分离因子α达到1.36。但对模板分子的类似物混旋扁桃酸和对氯扁桃酸没有拆分能 力。用Hyperchem软件模拟了(S)-邻氯扁桃酸与(S)-(1-萘乙基)-丙烯酰胺形成的复 合物的结构模型，其在聚合物母体中留下的具有立体构型和作用力双重识别的S-S 型空穴，对(S)-邻氯扁桃酸有较强的保留作用，从而达到对混旋物拆分的目的。     

TNT分子印迹聚合物微球的合成与性能研究

以三硝基甲苯(TNT)为模板分子,EDMA为交联剂,采用沉淀聚合法制备了TNT分子印迹微球.讨论了溶剂用量、模板分子用量、功能单体种类等对分子印迹微球的形貌及吸附性能的影响;利用紫外吸收光谱和BET表征了印迹聚合物微球的结合位点相互作用与印迹孔穴结构;通过平衡吸附和选择性吸附实验,研究了印迹聚合物微球的吸附性能和选择性识别性能.结果表明,以丙烯酰胺为功能单体制备的分子印迹聚合物为规则的球形,内部含有分子印迹孔穴,微球的粒径为1～2μm.印迹聚合物微球可在30 min内达到吸附平衡,在1 mmol/L的TNT乙醇溶液中,印迹聚合物微球的平衡吸附量为32.5 mmol/kg,对TNT分离系数为25.19,具有较好的特异性吸附能力,并可选择性识别TNT分子.     

反乌头酸分子印迹聚合物微球的制备及其分子识别功能

以乙腈为分散剂,采用沉淀聚合法合成了反乌头酸分子印迹聚合物微球。研究了合成反应条件对聚合物形貌的影响,发现聚合前主客体氢键络合物和功能单体氢键低聚体是控制微球形成及其粒径大小的关键因素。通过振荡吸附法对聚合物的结合特性进行了评价,发现印迹聚合物微球对模板分子的识别选择性优于块状印迹聚合物和非印迹聚合物。     

表面接枝分子印迹聚合物微球的合成及评价

将聚苯乙烯-二乙烯苯微球表面功能基化, 引入引发转移终止剂(initiator-transfer-terminator agent, iniferter), 以活性自由基聚合方式研究了球形树脂表面合成印迹聚合物的方法. 在紫外光引发下, 以左旋麻黄碱为印迹分子, 甲基丙烯酸为功能单体, 在接枝Iniferter后的微球表面进行分子印迹聚合物接枝实验, 并使用不同的反应条件, 探讨了表面接枝印迹层微球制备条件对于识别能力的影响. 平衡吸附的结果表明, 表面接枝聚苯乙烯-二乙烯苯微球对于印迹分子具有亲和能力及选择性, 其识别能力来自于印迹得到的识别位点.     

L-组氨酸手性识别印迹固定相的制备及表征

以L-组氨酸为模板分子, 甲基丙烯酸为功能单体, 乙二醇二甲基丙烯酸酯为交联剂, 偶氮二异丁腈为引发剂, 在水-乙腈微乳体系中采用沉淀聚合方法制备了具有手性识别L-组氨酸功能的印迹微球. 采用静态平衡吸附实验及色谱分析探讨聚合微球对模板分子的选择识别吸附性能. 结果表明, 该印迹聚合物微球对模板分子存在两种结合位点, 最大表观结合量分别为33.04和24.16 μmol/g. 相对于常规的C18柱, 该印迹聚合物填充柱能够完全分离L-组氨酸和D-组氨酸, 分离度R为2.23, 选择因子为2.14. 利用差热分析、红外光谱及X射线衍射等技术表征聚合物微球的热性能及结构. 结果表明, 聚合物微球具有良好的热稳定性, 是一种具有部分晶体结构的聚合物.     

加替沙星印迹聚合物微球的合成及特异吸附性能

采用沉淀聚合法制备了加替沙星分子印迹聚合物(MIP)微球,对其形貌和结构进行表征,并对聚合反应条件进行优化;采用静态吸附试验研究聚合物对模板分子及其结构类似物的吸附行为和选择性识别特性.结果表明,在最佳实验条件下,40min印迹聚合物即可达到对底物的吸附平衡;在印迹聚合物中存在两类结合位点,特异性和非特异性结合位点的最...     

鹅去氧胆酸分子印迹聚合物微球的制备及选择性分子识别

以鹅去氧胆酸(CDCA)为印迹分子, 甲基丙烯酸为功能单体, 丙烯酸乙二醇二甲基酯和三羟甲基丙烷三甲基丙烯酸酯为交联剂, 在氯仿中采用沉淀聚合法制得平均粒径为200~300 nm的分子印迹聚合物微球(MIPMS). 用红外光谱研究了印迹分子与功能单体之间的作用类型, 用透射电镜对聚合物的形貌进行了表征. 结果表明, 聚合物微球在合成过程中形成了两类结合位点, 该分子印迹聚合物对CDCA具有良好的特异吸附性能, 可用于胆汁酸的分离、纯化, 交联剂的种类可以影响分子印迹聚合物的形貌和吸附性能.     

沉淀聚合法制备三聚氰胺分子印迹聚合物微球

以三聚氰胺为模板分子,以甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在乙腈-乙二醇(20∶1,V/V)混合溶剂中沉淀聚合制备了分子印迹聚合物微球.利用1H-NMR和紫外光谱方法研究了模板与功能单体相互作用情况.结果表明,三聚氰胺与甲基丙烯酸(MAA)分子通过协同氢键作用形成1∶2型氢键配合物.利用扫描电镜和红外光谱对聚合物微球的结构进行了表征.结果表明,印迹聚合物近似圆球形,粒径约为400～500 nm,且大于非印迹聚合物微球,表面存在大量的结合位点.通过静态平衡吸附实验研究了聚合物微球对模板分子的结合能力,印迹聚合物微球在4 h后逐渐达到吸附平衡,Scatchard分析表明,印迹聚合物微球主要存在两类不同的结合位点,最大表观结合量(Qmax)和平衡离解常数(Kd)分别为Qmax1=22.97μmol/g,Kd1=0.14×10-3 mol/L;Qmax2=157.65μmol/g,Kd2=2.55×10-3 mol/L,计算得出表观印迹效率和有效印迹效率分别为68%和58%.此方法合成的印迹聚合物微球对三聚氰胺有较好的结合性能,可应用于三聚氰胺的分离检测.     

微球形4-氨基吡啶分子模板聚合物的合成及结合性质研究

利用分子印迹技术,通过沉淀聚合方法合成了对4－氨基吡啶具有选择性结合能力的微球形分子模板聚合物。通过静态结合方法研究了该聚合物的选择性结构能力以及不同溶剂及引发剂的用量对聚合物形态及球状 状聚合物粒烃大小的影响,底物选择性实验结果表明,与结构相似的化合物相比,4－氨基吡啶球形分子模板聚合物对4－氨基吡啶显示出强的选择性。     

Synthesis and binding site characteristics of 2,4,6-trichlorophenol-imprinted polymers

2,4,6-Trichlorophenol (2,4,6-TCP)-imprinted micro- and submicrospheres prepared by precipitation polymerization were compared with templated materials obtained by conventional bulk polymerization. The influence of the type and amount of functional monomer, the type and amount of cross-linker, polymerization temperature, porogen, and the ratio of template molecule and functional monomer to cross-linker on the size of the obtained particles were investigated. UV-Vis spectrophotometer experiments revealed that the microsphere polymers provided higher affinity to the template in contrast to imprinted polymers prepared by bulk polymerization. The binding properties of the microspheres, including binding isotherms and affinity distribution, were studied via Freundlich isotherm affinity distribution (FIAD) analysis. The obtained results indicated that microspheres prepared by precipitation polymerization provided superior rebinding properties during equilibrium binding in contrast to bulk polymers and submicrosphere polymers. Moreover, release experiments showed that 80% of rebound 2,4,6-TCP was released from the imprinted microspheres within the first 2 h, while more intimately bound 2,4,6-TCP molecules were released in the following 40 h. The morphologies and porosities of the resulting imprinted materials were characterized by scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) analysis, respectively. The microsphere polymers exhibited a regular spherical shape with a high degree of monodispersity to the corresponding bulk polymers. Furthermore, the micro- and submicrospheres were characterized by narrow distribution of pores in contrast to a heterogeneity index of m = 0.6647 for the microsphere imprinted polymer.     

Preparation of a Pyrazosulfuron-Ethyl Imprinted Polymer with Hydrophilic External Layers by Reversible Addition-Fragmentation Chain Transfer Precipitation and Grafting Polymerization

A new imprinted polymer with both functions of molecular recognition and macromolecule exclusion was synthesized for selective extraction of pyrazosulfuron-ethyl and removal of humic acids in environmental analysis. In the preparation, spherical pyrazosulfuron-ethyl imprinted polymers were synthesized by reversible addition–fragmentation chain transfer (RAFT) precipitation polymerization. The hydrophilic polymer layers were then grafted on the surface of the imprinted polymer microspheres using post-RAFT polymerization. The conditions that influence the selectivity, size, and uniformity of the imprinted microspheres were studied systematically. The computer simulation was employed to study the template-monomer interaction. The solubility parameters of poly(MAA-co-EDMA) and porogen were calculated to investigate the relationship between the particle size and the solubility parameter. The results indicated that the pyrazosulfuron-ethyl imprinted polymers have special affinity for the template and several structurally related sulfonylurea herbicides. The molecularly imprinted polymer (MIP) with external hydrophilic chains not only had function of template retention, but also better function of protein/humic acid exclusion. This research demonstrates that multifunctional imprinted material with a narrow size distribution can be prepared by the RAFT polymerization.     

Adsorption of carbaryl using molecularly imprinted microspheres prepared by precipitation polymerization

To obtain the desired specific adsorbents for carbaryl to enrichment, separation, and analysis of trace pesticide residues in environmental water, molecularly imprinted polymer (MIP) microspheres were prepared by precipitation polymerization using carbaryl, methacrylic acid (MAA), ethylene glycol dimethacrylate (EGDMA), azobisisobutyronitrile (AIBN), and acetonitrile as template, functional monomer, cross‐linker, initiator, and porogen, respectively. Molecular modeling software was used to compute rational interaction between the template molecule and function monomer. The adsorption properties of carbaryl in acetonitrile for imprinted microspheres were evaluated by equilibrium rebinding experiments. Scatchard plot analysis revealed that there was one class of binding sites populated in the imprinted polymer microspheres with dissociation constants of 3.3 × 10^?2 mol/l and an apparent maximum number of 1.95 µmol/g. The specificity of the imprinted microspheres was investigated by binding analysis using carbaryl and structurally related carbamate pesticides. The results indicated that the obtained imprinted microspheres showed a good selectivity for carbaryl. Copyright © 2007 John Wiley & Sons, Ltd.     

Rapid and efficient enantioseparation of (S)‐amlodipine by surface‐imprinted core–shell polymer microspheres

We present a protocol for the preparation of surface‐imprinted polymer microspheres by core–shell precipitation polymerization for the enantioseparation of (S)‐amlodipine. In this work, submicron mesoporous silica microspheres were prepared with gemini cationic surfactant as soft template. Molecularly imprinted polymers were coated on the silica supports with a low level of crosslinking, and the thickness of the thin‐walled imprinted shell was about 45 nm. The material showed fast binding kinetics for (S)‐amlodipine (within only 20 min for complete equilibrium), and the saturation adsorption capacity reached 309.2 mg/g, indicating the good accessibility of binding sites and improved mass transfer for target molecule. The imprinted microspheres exhibited an appreciable enantiomeric excess of (S)‐amlodipine of 11.3% when used as a glass chromatography column for the enantioseparation of (S)‐amlodipine from amlodipine besylate without extra chiral additives. The surface‐imprinted materials display potentially amplification for industrial enantioseparation of (S)‐amlodipine.     

Surface molecularly imprinted magnetic microspheres for the recognition of albumin

A new approach, combining metal coordination with the molecular imprinting technique, was developed to prepare affinity materials. Magnetic poly(glycidyl methacrylate) microspheres in monosize form were used for specific recognition toward the target protein. The magnetic poly(glycidyl methacrylate) microspheres were prepared by dispersion polymerization in the presence of magnetite nanopowder. Surface imprinted magnetic poly(glycidyl methacrylate) microspheres based on metal coordination were prepared and used for the selective recognition of human serum albumin. Iminodiacetic acid was used as the metal coordinating agent and human serum albumin was anchored by Cu²⁺ ions on the surface of magnetic poly(glycidyl methacrylate) microspheres by metal coordination. The magnetic poly(glycidyl methacrylate) microspheres were coated with a polymer formed by condensation of tetraethyl orthosilicate and 3‐aminopropyltrimethoxysilane. The human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres were characterized by scanning electron microscopy, attenuated total reflectance Fourier transform infrared spectroscopy and particle size analysis. The maximum adsorption capacity of human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres was 37.7 mg/g polymer at pH 6.0. The selectivity experiments of human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres prepared with different concentrations in the presence of lysozyme, bovine serum albumin and cytochrome C were performed in order to determine the relative selectivity coefficients.     

Preparation of Thermosensitive Hollow Imprinted Microspheres via Combining Distillation Precipitation Polymerization and Thiol‐ene Click Chemistry

Hollow molecular imprinted polymer microspheres were prepared by distillation precipitation polymerization with (S)‐(+)‐ibuprofen (S‐IBF) as template molecule and acrylamide (AM) as functional monomer. Using the silicon dioxide (SiO₂, 180 nm) modified by 3‐(trimethoxysilyl)propyl methacrylate (MPS) as the template microspheres, the molecular imprinted shells were coated on successfully (SiO₂@MIPs). The thermosensitive SiO₂@MIPs‐PNIPAM core‐shell microspheres were subsequently prepared by grafting the PNIPAM chains (M_n=1.21×10⁴ g/mol, polydispersity index=1.30), which were prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization, on the surface of SiO₂@MIPs microspheres via the thiol‐ene click chemistry. The grafting density of PNIPAM brushes on the SiO₂@MIPs microspheres was about 0.18 chains/nm². After HF etching, the hollow imprinted microspheres were finally obtained. For thermosensitivity analysis, the phase transition temperatures of multifunctional nanoparticles were measured by DSL at 25°C and 45°C respectively, and the sizes of the microspheres changed by about 35 nm. The modified microspheres presented excellent controlled release property to S‐IBF, moreover about half amount of the adsorptions passed into acetonitrile‐water solution through the specific holes of imprinted shell at 25°C under vibration.