Reactions of dodecacarbonyltriruthenium with α,β-unsaturated ketones. Crystal and molecular structures of two reaction products

The thermal reactions of Ru₃(CO)₁₂ with RCOCH=CHPh (R=Me, p-MeC₆H₄) in hydrocarbon solvents lead to the formation of a series of complexes, several of which have been isolated as individual compounds by chromatography. The dinuclear complex Ru₂(-H)(CO)₆(-MeCOCH=CPh) and the tetranuclear complex Ru₄(-H)(-CO)(CO)₇(p-MeC ₆H₄ COCH=CPh)(-p-MeC₆H₄COCH=CPh)(₄-p-MeC₆H₃COCH=CHPh) are characterized by an X-ray structural study. The structures of other reaction products are discussed on the basis of spectral data. The reactions are accompanied by reduction of the starting enones to the corresponding unsaturated ketones.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1285–1293, July, 1993.     

Redox Properties of Rhodium(III) Oxo-Bridged Carboxylate Complexes

Chemical and electrochemical oxidation of rhodium (III) oxo-bridged carboxylate complexes was studied. The chemical [with O₃ and Ce(IV) salts] or electrochemical (at potentials of 1.00-1.20 V) oxidations of the binuclear complexes [Rh₂(-O)(-O₂CCH₃)₂(H₂O)₆]^{2 +} and [Rh₂(-O)(-O₂CCF₃)₂(H₂O)₆]^{2 +} leads to the superoxo complexes [Rh₂(-O)(O₂-)(-O₂CCH₃)₂(H₂O)₅]⁺ and [Rh₂(-O)(O₂ ^-)(-O₂CCF₃)₂(H₂O)₅]⁺ with terminal coordination of O₂-. The trinuclear acetate [Rh₃(₃-O)(-O₂CCH₃)₆(H₂O)₃]⁺, unlike its trifluoroacetate analog [Rh3(₃-O)(-O₂CCF₃)₆(H₂O)₃]⁺, is oxidized only electrochemically at a potential of 1.38 V. The oxidation of [Rh₃(₃-O)(-O₂CCH₃)₆(H₂O)₃]⁺ is reversible and involves formation of an unstable superoxo group O₂ ^- between two Rh₃III(₃-O) cores.     

Determination of Squalene Using High-Performance Liquid Chromatography with Diode Array Detection

A high-performance liquid chromatographic method with photodiode array detection has been developed for the determination of squalene. After treated by extraction and fractional crystallization, squalene was analyzed on a C₁₈ column (150 × 3.9 mm, 5 m) with acetonitrile as mobile phase. Excellent linearity of the calibration curve was observed in the range of 100–40000 gL^–1 and the detection limit was 40 gL^–1. The recoveries were from 89.6% to 100.5% and the relative standard deviations were from 0.5% to 1.4%. The method was successfully applied to the determination of squalene in squalene capsules, olive oil, algal lipids and algal cells.     

Protonation of Os3(μ-H)(CO)9(μ3-σ,η2-C≡C-R) clusters (R=CMe2OH,C(Me)=CH2)

Protonation of triosmium clusters Os₃(-H)(CO)₉(₃-,²-CC-R) (R=CMe₂OH, C(Me)=CH₂) affords a cationic complex containing a six-electron propargyl ligand which has been detected for the first time.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1144–1145, June, 1993.     

Calculation of thermal effects in DTA

By considering that the temperature of the end of the thermal effect and the return of the thermal curve to the baseline do not coincide new calculation methods for the thermal effect become possible. Both the integral value of the thermal effect and its distribution over temperature may be calculated by processing only that part of the DTA curve which corresponds to the temperature interval of the transformation.It is demonstrated on the examples of non-variant transformation and transformation with an even distribution of the thermal effect over the temperature interval of the transformation that, under certain assumptions, the values of the thermal effect calculated by the suggested method and by the area of the peak are identical.

---

Zusammenfassung Bei Berücksichtigung, daß die Temperatur des Endes des thermischen Effekts und die Rückkehr der thermischen Kurve zur Grundlinie nicht zusammenfallen, werden neue Methoden zur Berechnung des thermischen erschlossen. Sowohl der Integralwert des thermischen Effekts, als auch seine Verteilung in dem Temperaturbereich können durch Behandlung ausschließlich desjenigen Teils der DTA-Kurve berechnet werden, welcher dem Temperaturbereich der Umwandlung entspricht.Anhand von Beispielen der nicht-varianten Transformation und der Transformation mit gleichmäßiger Verteilung des thermischen Effekts im Temperaturbereich der Umwandlung wurde gezeigt, daß — unter gewissen Voraussetzungen — die Werte des durch die vorgeschlagene Methode und des aus der Peakfläche berechneten thermischen Effekts identisch sind.

---

Résumé En considérant le fait que la température de la fin de l'effet thermique et le retour à la ligne de base de la courbe ATD ne coïncident pas, on a développé de nouvelles méthodes du calcul de l'effet thermique. La valeur intégrale de l'effet thermique ainsi que sa distribution dans l'intervalle de températures peuvent être calculées en ne considérant que la partie de la courbe ATD qui correspond à l'intervalle de température de la transformation.A l'aide d'exemples de transformations invariantes et de transformations à distribution uniforme de l'effet thermique dans l'intervalle de températures de la transformation, on a montré qu'avec certaines hypothèses, les valeurs de l'effet thermique calculées par la méthode proposée et à partir des surfaces des pics, sont identiques.

---

. , -, . , , .

     

Colloid chemical studies of polystyrene latices polymerized without any surface-active agents

Summary The influence of secondary minimum for the stability of spherical colloid has been studied using a series of soap-free polystyrene latices from 350 m to 1400 m in diameter.The critical flocculation concentration (c. f. c.) and the zeta-potential at the c. f. c. for each latex were determined with several salts of different ionic valencies. The values of c. f. c. varied with the particle size, reaching a maximum value at 750 m and then decreasing gradually with the diameter.Another phenomenon detected in the experiment was the complete reversibility of coagulation which was observed only in the cases of large size latices, i. e., the coagulates of large size particles were fully redispersed in the solution by stirring. The time-dependence of their sedimentation curves was reproducible.These experimental results could not be explained by the simple theoretical consideration for stability of suspension. The satisfactory explanation is given only using the term of secondary minimum of interaction potential, i. e., the origin of coagulation was shifted from the ordinary primary minimum to the shallow secondary minimum at about 750 m of the particle diameter.

---

Zusammenfassung Der Einfluß des Sekundär-Minimum auf die Stabilität von Kolloiden wurde an seifenfreien Polystyrol-Latex-Suspensionen mit einem Durchmesser von 350 m bis 1400 m untersucht. Die kritische Flockungskonzentration (c. f. c.) und das Zeta-Potential bei c. f. c. wurde mit verschiedenen Salzen bestimmt.Der Wert von c. f. c. ändert sich mit der Teilchengröße.Ein weiterer wichtiger experimenteller Befund ist die vollständige Reversibilität der Flockung bei größeren Latices.Derartige Versuchsergebnisse können durch das Sekundär-Minimum befriedigend erklärt werden.

---

---

With 7 figures in 10 details and 2 tables     

Triiron and Triruthenium Carbonyl Clusters Bearing Bridging Long Chain Diphosphine and Capping Chalcogenido Ligands

Treatment of Ru₃(CO)₁₂ with dpphSe₂ (dpph = 1,6-bis(diphenylphosphino)hexane) in refluxing toluene in the presence of Me₃NO afforded two new compounds, Ru₃(CO)₇(-CO)(₃-Se)(-dpph) (1) and Ru₃(CO)₇(₃-Se)₂(-dpph) (2). A similar reaction of Ru₃(CO)₁₂ with dpppeSe₂ (dpppe = 1,5-bis(diphenylphosphino)pentane) gave exclusively Ru₃(CO)₇(₃-Se)₂(-dpppe) (3). Treatment of Ru₃(CO)₁₂ with dpphS₂ and dpppeS₂ at 110°C in the presence of Me₃NO afforded Ru₃(CO)₇(₃-S)₂(-dpph) (4) and Ru₃(CO)₇(₃-S)₂(-dpppe) (5), respectively. Reactions of Fe₃(CO)₁₂ with dpphSe₂ and dpppeSe₂, under identical conditions, afforded Fe₃(CO)₇(₃-Se)₂(-dpph) (6) and Fe₃(CO)₇(₃-Se)₂(-dpppe) (7), respectively. Compounds 1–7 were characterized spectroscopically and the molecular structures of compounds 1–4 were determined by single crystal X-ray crystallography. The core of 1 contains an equilateral triangle of ruthenium atoms with one capping selenium, one bridging dpph, one doubly bridging carbonyl and seven terminal carbonyl ligands. Complexes 2–4 have a square-pyramidal structure with two metal and two chalcogenide atoms alternating in the basal plane and the third metal atom at the apex of the pyramid, and belong to the family of well-known nido clusters with seven skeletal electron pairs.     

Development and Validation of an HPTLC–Densitometric Method for Determination of ACE Inhibitors

A high-performance thin layer chromatographic method coupled with densitometric analysis has been developed for measurement of benazepril and cilazapril, both pure and in their commercial dosage forms. The active substances were extracted from tablets with methanol (mean recovery 102%) and chromatographed on silica gel 60 F₂₅₄ HPTLC plates in horizontal chambers with ethyl acetate–acetone–acetic acid–water, 8:2:0.5:0.5 (v/v), as mobile phase. Chromatographic separation of these ACE inhibitors was followed by UV densitometric quantitation at 215 nm. Calibration plots were constructed in the range 0.4 to 2.0 g L^–1 for benazepril (2.0–10.0 g spot^–1) and from 0.5 to 1.5 g L^–1 for cilazapril (4.0–12.0 g spot^–1) with good correlation coefficients (r 0.990). The method was used to determine benazepril and cilazapril in pharmaceutical preparations with satisfactory precision (1.4% < RSD < 5.6%) and accuracy (1.7 < RE < 5.1).     

μSr studies of free radicals in the gas phase

Muonium (Mu=₊+e^-) is the bound state of a positive muon and an electron. Since the positive muon has a mass about 1/9 of the proton, Mu can be regarded as an ultra light isotope of hydrogen with unusually large mass ratios (MuHDT=1/9123). The muon spin rotation technique (SR) relies on the facts that (1) the muon produced in pion decay, ^{+ +} + , is 100% spin polarized and (2) the positron from muon decay is emitted preferentially along the instantaneous muon spin direction at the time of the muon decay.In transverse field SR (TF-SR), the precession of the muon spin in muonium substituted radicals is directly observed by detecting decay positrons time differentially. From observed radical frequencies, the hyperfine coupling constants (A ) of C₂H₄Mu, C₂D₄Mu,¹³C₂H₄Mu, C₂F₄Mu, and C₂H₃FMu are determined. In the longitudinal field avoided level crossing (LF-ALC) technique, one observes the resonant loss of the muon spin polarization caused by the crossing of hyperfine levels at particular magnetic fields. The LF-ALC method together with the information onA obtained from TF-SR allows one to determine the magnitude and sign of the nuclear hyperfine constants at - and -positions. Results are compared with hydrogen substituted ethyl-radicals and isotope effects are discussed.     

An Asymmetric Edge-Sharing Bioctahedral Complex: (η2-DAniF)MoIII(μ-DAniF)2(μ-O,Cl)MoVCl2 (DAniF=N,N′-di-p-anisylformamidinate)

A novel asymmetric, edge-sharing bioctahedral complex with formamidinato ligands ( ²-DAniF)Mo(-DAniF)₂(-O,Cl)MoCl₂, 1, (DAniF=N,N-di-p-anisylformamidinate) has been isolated as a byproduct from the preparation of the dimolybdenum(II,III) compound Mo₂(DAniF)₃Cl₂. An X-ray crystallographic study shows that the structure consists of edge-sharing bioctahedra, with the shared edge defined by the vector joining the: -O and -Cl ligands. Compound 1 is best formulated as a mixed-valent Mo^IIIMo^V compound, the Mo(V) ion being that with the two terminal Cl^– ligands. The cyclic voltammogram of 1 shows a reversible reduction at –0.472 V and a reversible oxidation at 1.028 V vs. the Ag/AgCl reference electrode, while the absorption spectrum of 1 reveals an intense low energy absorption at 523 nm ( _max=12 500) which is attributed to an intervalence charge transfer transition. Crystallographic data for 1 are as follows: a=13.387(1) Å, b=15.500(2) Å, c=21.855(2) Å, =98.786(2)°, V=4481.8(8) ų, P2₁/c, R1 (wR2)=0.082 (0.177).     

A simple autonull-type servo-controlled electronic balance for thermogravimetric applications

A simple electronic autonull-type recording balance using a helical quartz spring is described. Deviation from the null position is detected by a pair of photoemissive cells. The error signal generated across the cells as a result of weight change is processed by a servo-system which, in turn, produces an electric current in the balancing coil proportional to the force required to restore the null position. This current, recorded as the potential drop across a standard resistor, is a direct measure of the weight change.The balance has good linear response and can record weight changes up to 150 mg. The performance of the balance was tested in a thermogravimetric set-up, by studying the decomposition in air of the oxalates of copper, nickel and magnesium. The decomposition of nickel oxalate was also studied in flowing hydrogen. The weighing accuracy of the balance, compared against a Mettler model H-15 single-pan balance, was found to be within±1.5%.

---

Zusammenfassung Eine einfache elektronische registrierende Quartz-Spiralfeder Kompensationswaage wird beschrieben. Die Abweichung von der Nullposition wird durch zwei Photoemissionszellen angezeigt. Das infolge der Gewichtsänderung durch die Zellen erzeugte Fehlersignal wird durch ein Servosystem empfangen, das seinerseits in der Ausgleichsspirale einen elektrischen Strom erzeugt, der proportional zur für die Wiederherstellung der Null-position benötigten Kraft ist. Dieser Strom, der als Spannungsgefälle in einem Standardwiderstand registriert wird, ist eine direkte Maßzahl der Gewichtsänderung.Die Waage zeigt ein gutes lineares Verhalten und kann Gewichtsänderungen bis zu 150 mg registrieren. Die Leistung der Waage wurde in einer thermogravimetrischen Vorrichtung durch Untersuchungen der Zersetzung der Oxalate von Kupfer, Nickel und Magnesium in Luft geprüft. Die Zersetzung von Nickeloxalat wurde auch in strömendem Stickstoff untersucht. Die Meßgenauigkeit der Waage, vergleichen mit der Einschalenwaage Mettler H-15 wurde im Bereich von±1.5% gefunden.

---

Résumé On décrit une balance électronique enregistreuse simple du type auto-zéro, à hélice de quartz. La déviation de la position zéro est décelée par une paire de cellules photoémissives. Le signal de déséquilibre décelé par les photocellules et résultant d'un changement de poids, est reçu par un système asservi qui, à son tour, produit un courant électrique dans la bobine de la balance, proportionnel à la force nécessaire pour rétablir la position zéro. Ce courant, enregistré comme chute de potentiel dans une résistance étalon, est une mesure directe du changement de poids.La balance donne une bonne réponse linéaire et peut enregistrer des changements de poids allant jusqu'à 150 mg. Ses caractéristiques ont été examinées dans un montage thermogravimétrique, en étudiant la décomposition dans l'air des oxalates de cuivre, nickel et magnésium. La décomposition de l'oxalate de nickel a aussi été étudiée sous courant d'hydrogène. L'exactitude de la balance, comparée à celle d'un modèle Mettler monoplateau (type H-15), coïncide à±1.5%.

---

, . . , , -, , . , , . 150 . , . . -15 +1.5%.

---

---

The authors wish to express their thanks to Mr. S. P. Sen, Manager. Catalyst Development and Production Department of Fertilizer (Planning and Development) India Limited, for his keen interest and valuable suggestions.     

Size spectra for trace elements in urban aerosol particles by instrumental neutron activation analysis

Size-fractionated aerosol samples collected with micro-orifice impactors at Camden, NJ, a heavily industrialized urban area, and at two sites near Washington, DC, were analyzed for elemental constituents determined instrumentally from short-lived neutron activation products. A least-squares peak-fitting method was used with impactor calibration data to determine log-normal distribution parameters, i.e., mass median aerodynamic diameter (MMAD) and geometric standard deviation (_g) for particles bearing S, V, Br, and I. For these elements, MMADs ranged from 0.24 to 0.65 m; 0.23 to 0.53 m; 0.22 to 0.61 m, and 0.20 to 0.48 m, respectively.     

Diacetylenic Derivatives of Fe2(CO)6(μ-EE′): Spectroscopic Investigations of Fe2(CO)6{μ-EC(H) = C(C≡ CMe)E′} (E = E′, E ≠ E′; E, E′ = S, Se, Te)

The diacetylenic adducts, Fe₂(CO)₆{-EC(H) = C(C CMe)E} (E = E, E E; E, E = S, Se, Te) (1–8) have been obtained from the room temperature stirring of Fe₂(CO)₆(-EE) with HC CC CMe in methanol solvent containing sodium acetate. Compounds 1–8 have been characterized by IR and multinuclear NMR (¹H, ¹³C, ⁷⁷Se, and ^l25Te) spectroscopy. Trends in the chemical shifts of ⁷⁷Se and ¹²⁵Te NMR spectra of Fe₂(CO)₆{-EC(H) = C(C CMe)E} with a variation of EE are discussed.     

Reactivity of electronically excited Br(2P1/2) atoms towards CH3F

The rate constants for Br(²P_1/2) and Br(²P_3/2) atoms in the reaction Br+CH₃FHBr+CH₂F in photobromination of CH₃F have been determined. Their ratio is 10^{–(2.6±0.5)} exp(10100±1000/RT) in the temperature range of 60–200 °C.

---

Br(²P_1/2) Br(²P_3/2) Br+CH₃FHBr+CH₂F CH₃F. 60–200 °C 10^{–(2,6±0,5)} exp (10100±1000/RT).

     

Magnetic susceptibility measurement with a Dupont's thermogravimetric analyser

The adaptation of a Du Pont Thermogravimetric Analyser for the measurement of magnetic susceptibility as a function of temperature in the range – 80 °C to 300 °C is described.

---

Zusammenfassung Die Adaptation des Du Pont's Thermogravimetric Analyzer zur Messung der magnetischen Suszeptibilität in Abhängigkeit von der Temperatur im Bereich von – 80° bis 300 °C wird mitgeteilt.

---

–80°–300 °.

     

Bestimmung flüchtiger organischer Verbindungen in atmosphärischen Aerosolproben durch thermische Desorption und FID-Detektion

Zusammenfassung Staub- und Aerosolproben werden im Stickstoffstrom im Temperaturbereich 25–420° C einer temperaturprogrammierten thermischen Desorption unterworfen. Die flüchtigen organischen Komponenten werden mittels FID summarisch als volatile organic carbon (VOC) bestimmt. Die Eichung des Analysators erfolgt durch ein Aliphaten-Standardgemisch. Bei Probemengen von 50–100g Aerosol ist eine Bestimmung des VOC-Gehaltes mit einer Reproduzierbarkeit vons=3,5–7 rel.% möglich. Die Nachweisgrenze der Methode liegt für Aerosolproben bei 0,3g VOC.

---

Determination of volatile organic components in atmospheric aerosol samples by thermal desorption and FID-detection

Summary Atmospheric dust and aerosol samples are treated in a nitrogen carrier gas stream at the temperature range 25–420° C by temperature programmed desorption. The volatile organic components are detected by FID. Calibration of the analyzer is carried out with a standard mixture of aliphatic hydrocarbons. The result is expressed as volatile organic carbon (VOC). The reproducibility of the method for aerosol samples (sample weight 50–100g) is in the range of 3,5–7% r. s. d. The detection limit of the method is 0,3g VOC.

     

Surface modification by calcium ions—Effect on chromatographic properties of silica

Summary A liquid chromatographic method incorporating column-switching and fluorimetric detection for the determination of triamterene in untreated urine, is described. The urine samples (5 L) were directly introduced onto an Hypersil ODS-C18, 30 m (20 mm×2.1 mm I.D.) pre-column. Polar urinary compounds were removed by flushing the pre-column with water for 1 min, and the analyte was then switched onto an HP-LiChrospher RP C18,5 m (125 mm×4mm ID) analytical column using an acetonitrile/phosphate buffer gradient elution. Fluorescence detection was performed at 230 nm excitation and 430 nm emission wavelengths. The recovery of drug was 102±2% in the 0.10–20.0 g/mL concentration range, the limit of detection being 5 ng/mL. A validation of the usefulness of this procedure was accomplished by analysing urine extracts obtained from real samples.Hypersil ODS is not a product of Merck, Germany. Please give supplier (p. 5).     

Kinetics of ammonia decomposition of polycrystalline rhodium at pressures between 0.013 and 103 kPa

The rates of ammonia decomposition on polycrystalline Rh wires between 600 and 1800 K and at pressures between 13.3 Pa and 103 kPa were measured and fitted with a Langmuir-Hinshelwood unimolecular reaction rate expression. At high temperatures and pressures the reaction seems to be mass transfer controlled.

---

Rh 600–1800 K 13,3 –103 . , -. .

     

Polypyrrole modified stainless steel frits for on-line micro solid phase extraction of ochratoxin A

Polypyrrole (PPy) was electrochemically synthesized on stainless steel frits as a sorbent for the micro solid phase extraction (SPE) of ochratoxin A (OTA). Using 20 l of standard solution under a fast flow rate of 0.5 ml/min, 80% recovery of OTA was achieved in the concentration range from 0.1–10 pg/l. This good recovery was achieved within a short residence time of 1.2 s. A binding capacity of 1 ng OTA was estimated for each PPy-modified frit, or 2 ng OTA for two frits in series. The bound OTA could be pulsed eluted (PE) with 20 l of 1% triethylamine in acetonitrile. On-line coupling of this PPy-on-a-frit and PE technique to high performance liquid chromatography (HPLC) was straightforward. On-line SPE-PE-HPLC results clearly demonstrated the capability of PPy-on-a-frit to bind OTA in the presence of red wine, beer, and orange juice components.