Preparation, characterization and curing properties of epoxy-terminated poly(alkyl-phenylene oxide)s

A series of dihydroxyl telechelic poly(alkyl-phenylene oxide)s (1) have been synthesized by oxidative polymerization of alkylphenols with various aromatic diols using manganese or copper amine catalysts. The novel telechelic derivatives (1) were epoxidized with epichlorohydrin yielding a series of new epoxidized poly(alkyl-phenylene oxide)s (EPPO, 2) and the structures, properties were studied by nuclear magnetic resonance spectroscopy (NMR), differential scanning calorimetry (DSC), thermo gravimetric analysis (TGA) and gel permeation chromatography (GPC). The 1:1 blends of diglycidyl ether of bisphenol-A (DGEBA) with EPPO resins were cured with three curing agents and the effects of chemical structure change on thermal property of the curing matrixes were discussed. Incorporation of EPPOs to DGEBA epoxy system resulted in a significant increase in its glass transition temperature (T_g), thermal stability and flame resistance. The T_g values and char yields arising from a DDM-cured epoxy resin are usually higher than those of dicyandiamide (DICY) or 2-methylimidazole (2-MI) analogues and the reactivity of epoxy blends with three curing agents presents an increase in the order of 2-MI, DDM and DICY. In general, the tetramethylbisphenol-A (TMBPA)-derived polymer exhibits the lowest T_g, char yield and dielectric constant among PPO derivatives whereas the biphenol polymers usually results in higher T_g and char yield due to its rigid rod structure.     

Microwave-assisted rapid synthesis of novel optically active poly(amide-imide)s containing hydantoins and thiohydantoins in main chain

Rapid and highly efficient synthesis of novel optically active poly(amide-imide)s (PAIs) 6(a-f) was achieved using microwave irradiation. These were made from the polycondensation reactions of 4,4^′-carbonyl-bis(phthaloyl-l-alanine) diacid chloride [N,N^′-(4,4^′-carbonyldiphthaloyl)] bisalanine diacid chloride 5 with six different derivatives of hydantoin and thiohydantoin compounds 4(a-f) in the presence of a small amount of a nonpolar organic medium that acts as a primary microwave absorber. Hydantoin and thiohydantoin derivatives 4(a-e) were synthesis from the reactions between benzil or benzil derivatives 3(a-e) with urea and thiourea. 5,5-Dimethylhydantoin 4f was synthesis from the reactions between acetone cyanohydrin 3f and ammonium carbonate. The polycondensation proceeded rapidly, and was completed within 10 min giving a series of PAIs with an inherent viscosity about 0.25-0.45 dL/g. The resulting PAIs 6(a-f) were obtained in a high yield and were optically active and thermally stable. All of the above compounds were fully characterized by means of Fourier transform infrared spectroscopy, elemental analyses, inherent viscosity (η_inh), solubility tests and specific rotation. Thermal properties of the PAIs 6(a-f) were investigated using thermal gravimetric analysis.     

Preparation of 4-trifluoroethylidene-1,3-dioxolane derivatives via new stable (trifluoromethyl)ethynylation reagent

Perfluoroalkylated 4-trifluoroethylidene-1,3-dioxolane derivatives 2a-q were prepared in excellent yields from the reaction of new stable (trifluoromethyl)ethynylation reagent 1a with 1.3 equiv. of TBAF at −15°C for 10 min, followed by treatment with 2 equiv. of phenyl perfluoroalkylated ketone derivatives at room temperature. The reaction of 1a with 1.3 equiv. of TBAF, followed by treatment with 1 equiv. of aldehyde or ketone at −15°C for 10 min and then with trifluoroacetophenone (1 equiv.) at room temperature afforded perfluoroalkylated 4-trifluoroethylidene-1,3-dioxolane derivatives 2t-u in moderate yields.     

Thermal degradation during melt processing of poly(ethylene oxide), poly(vinylidenefluoride-co-hexafluoropropylene) and their blends in the presence of additives, for conducting applications

In this paper, the thermal degradation during compounding of poly(ethylene oxide) and poly(vinylidenefluoride-co-hexafluoropropylene) and their immiscible blends was investigated. Infrared spectroscopy, size exclusion chromatography, dynamic rheology, thermogravimetric analysis, and coupled gas chromatography-mass spectroscopy were used. Most of the identified degradation products or substances are glycols, formates, lactones, ethers or even acids for long processing times. The mechanisms for the production of these chemical compounds were already reported in previous publications. Additionally, the influence of carbon black and LiV₃O₈ additives, currently used for enhancing the conductive properties, was studied. Addition of carbon black causes an increase in the PEO stability, whereas addition of LiV₃O₈ has an opposite and dramatic effect. PVDF-HFP is found to be less susceptible to degradation because of the inherent stability of fluorine-containing polymers. However, melt processing provides additional contributions to degradation because of the high viscosities.     

A new and efficient method for the synthesis of 3-(2-nitrophenyl)pyruvic acid derivatives and indoles based on the Reissert reaction

The formation of 3-(2-nitrophenyl)pyruvic acid and its amide and ester derivatives – key compounds for the Reissert indole synthesis – was achieved under various reaction conditions via the acid catalyzed hydrolysis of 5-(2-nitrobenzyliden)-2,2-dimethyl-1,3-oxazolidin-4-one, which is readily available from 3-(2-nitrophenyl)oxirane-2-carboxamide. A new and highly efficient method for the synthesis of indole-2-carboxylic acid derivatives via the intramolecular reductive cyclization of o-nitrophenylpyruvic acid and its amide and ester derivatives was developed using Na₂S₂O₄ in dioxane/water at reflux.     

Synthesis and characterization of new organotin(IV) complexes with polyfunctional ligands

New mono-, di- and tri-organotin(IV) derivatives containing the neutral bis(2-pyridylthio)methane ligand, [(pyS)₂CH₂] and tris(2-pyridylthio)methane ligand, [(pyS)₃CH] have been synthesized from reaction with SnR_nCl_4−n (R = Me, ⁿBu, Ph and Cy, n = 1-3) acceptors. Mono-nuclear adducts of the type {[(pyS)₂CH₂]R_nSnCl_4−n} and {[(pyS)₃CH]R_nSnCl_4−n} have been obtained and characterized by elemental analyses, FT-IR, ESI-MS, multinuclear (¹H and ¹¹⁹Sn) NMR spectral data. The ¹H and ¹¹⁹Sn NMR and ESI-MS data suggest for the triorganotin(IV) derivatives a complete dissociation of the compounds in solution. The mono- and di-organotin(IV) derivatives show a greater stability in solution, and their spectroscopic data are in accordance with the existence of six-coordinated RSnCl₃N₂ or R₂SnCl₂N₂ species.     

A concise Pd catalyzed cross coupling reaction along with deprotection for the synthesis of a new series of pyrimidine derivatives

A new series of 2-amino, 4-azepanone, 5-aryl substituted derivatives of pyrimidine compounds were synthesized for the first time from the commercially available 2-amino-4-hydroxypyrimidine. The key step in the reaction is a conceptually new single step palladium catalyzed cross coupling along with the deprotection of N,N-diisopropylformimidamide using bis(triphenylphosphine)palladium(II) dichloride (PdCl₂(PPh₃)₂).     

A thermal study of Cu(II) compounds formed with piperazine derivatives

The thermal behaviour of some Cu(II) compounds formed with 1,4-disubstituted piperazine derivatives has been studied. The investigations were performed on a MOM 1500 derivatograph. The endothermic effects observed at 170–180°C are associated with the processes of dehydration and dehalogenation of the compounds, with general formula LH₂·CuCl₄·H₂O, whereL is the piperazine derivative. The residue at 600°C remains relatively constant.     

2,5-Dimethoxy-2,5-dihydrofuran chemistry: a new approach to 2(5H)-furanone derivatives

2,5-Dimethoxy-2,5-dihydrofuran is a synthetic equivalent of 2(5H)-furanone or 2-trimethylsilyloxyfuran, useful C₄ synthons in the preparation of 5-substituted-2(5H)-furanone derivatives. The reaction conditions adopted allow to obtain different classes of complex and biologically interesting compounds, in only one step, with high yields.     

Synthesis of poly(silylenephosphonate)s incorporating 2-chloroethylphosphonic acid (ethephon), a stimulant for the latex production by the Hevea brasiliensis

2-Chloroethylphosphonic acid (ethephon) is a well-known stimulant commonly used to improve the latex production by the rubber tree (Hevea brasiliensis). In order to prolong its stimulating activity, the purpose was to insert ethephon inside polymer chains which, afterwards, will be able to degrade slowly through time, and thus to release ethephon molecules. For that, linear poly(silylenephosphonate)s incorporating ethephon groups were synthesized by using a polycondensation procedure between ethephon (or one of its dialkyl phosphonate derivatives) and an α,ω-dihalogeno-silylated monomer. To make sure that polycondensation can occur, the reactivity of halogenotrimethylsilanes (X=Cl or Br) toward ethephon and its various dialkyl phosphonate derivatives, was examined first. Then, poly(silylenephosphonate) synthesis was achieved by polycondensation between diisopropyl (2-chloroethyl)phosphonate and α,ω-dichloro-silylated monomers. According to this procedure, cyclic polymers of low average molecular weights (M_n<2000) were obtained, whatever the α,ω-dihalogeno-silylated monomer used.     

Photophysical properties of PPP and PPV derivatives bearing polystyrene or polycaprolactone as side groups

This contribution reports on detailed photophysical investigations of poly(p-phenylene) PPP and poly(p-phenylene-vinylene) (PPV) derivatives laterally decorated with polystyrene (PPV-PSt) or poly(ε-caprolactone) (PPP-PCL, PPP-altPCL, PPV-PCL and PPV-PCL-Br). The polymers emit blue and exhibit very high relative and absolute photoluminescence quantum yield, Φ_f, in dilute solution, thin film (spin-coated and inkjet-printed) and bulk state. This is ascribed to the presence of the lateral macromolecules, which suppress the strong π-π interactions and consequently excimers formation. Lower Φ_f value was obtained for the bromine containing polymer and its corresponding model compound dibromodistyrylbenzene Br₂-DSB, which was ascribed to heavy atom effect enabling intersystem crossing from S₁ to T₁. However, studies at 77 K did not reveal phosphorescence, in contrast an enhancement of the fluorescence intensity with respect to room temperature measurement was observed.     

Green synthesis of 4,6-bisarylpyrimidin-2(1H)-ones and azo-linked 4-arylpyrimidin-2(1H)-ones using NiFe2O4@SiO2nPr@glucose amine as a mild nano catalyst

The clean, environmentally benign and effective synthesis of novel azo-linked 4-arylpyrimidin-2(1H)-one derivatives and 4,6-bisarylpyrimidin-2(1H)-ones via three-component reaction of various aldehydes or synthetized azo-linked aldehydes, urea, and acetophenone promoted by NiFe₂O₄@SiO₂ⁿPr@glucose amine at room temperature (25 °C) was reported. NiFe₂O₄@SiO₂ⁿPr@glucose amine were synthesized and characterized by transmission electron microscope (TEM), fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometry (VSM), X-ray powder diffraction (XRD) and X-ray spectroscopy (EDX). These compounds were obtained in high yields and short reaction times. The catalyst could be easily recovered and reused for six cycles with almost consistent activity. The structures of the synthesized 4,6-bisarylpyrimidin-2(1H)-one compounds were confirmed by ¹H NMR, ¹³C NMR and FTIR spectral data and elemental analyses.     

Kinetic resolution of poly(ethylene glycol)-supported carbonates by enzymatic hydrolysis

The enzyme-mediated enantioselective hydrolysis of poly(ethylene glycol) (PEG)-supported carbonates is disclosed. The water-soluble carbonates were prepared by immobilization of a racemic secondary alcohol (4-benzyloxy-2-butanol) onto low-molecular weight (av MW 550 and 750) monomethoxy PEG through a carbonate linker. For the screening of the hydrolytic enzymes, the substrate was enantioselectively hydrolyzed by commercially available lipase from porcine pancreas (PPL; Type II, Sigma) to afford the optically active compounds. In this system, the separation of the remaining (S)-substrate and the resulting (R)-alcohol was achieved by an extraction process without a laborious column chromatography. The (S)-carbonate was easily hydrolyzed with K₂CO₃ to afford the corresponding (S)-alcohol. Other MPEG-supported substrates were also hydrolyzed to afford the corresponding optically active alcohols.     

Organic thermal stabilizers for rigid poly(vinyl chloride). Part XII: N-phenyl-3-substituted-5-pyrazolone derivatives

N-phenyl-3-substituted-5-pyrazolone derivatives have been examined as thermal stabilizers or co-stabilizers for rigid PVC in air, at 180 °C. Their high stabilizing efficiency is detected by their high induction period values (T_s) when compared with some of the common reference stabilizers used industrially, such as dibasic lead carbonate, calcium-zinc soap and n-octyl tin mercaptide. Blending these derivatives with some of the reference stabilizers in different ratios had a synergistic effect on both the induction period and the dehydrochlorination rate.A probable mechanism for the stabilizing mode of N-phenyl-3-substituted-5-pyrazolone derivatives has been proposed. The stabilizing efficiency is attributed at least partially to the ability of the organic stabilizer to be incorporated in the polymeric chains, thus disrupting the chain degradation.     

Indium(III) triflate catalyzed tandem azidation/1,3-dipolar cycloaddition reaction of ω,ω-dialkoxyalkyne derivatives with trimethylsilyl azide

The azidation reaction of dialkyl acetal derivatives with trimethylsilyl azide (TMSN₃) was efficiently catalyzed by 1-5 mol % of In(OTf)₃. The major product differed depending on the substrate structure and molar ratio of TMSN₃, that is, aliphatic acetals provided α-azido ether derivatives, while aromatic acetal (benzaldehyde dimethyl acetal) provided gem-diazide, respectively. Furthermore, novel tandem azidation/1,3-dipolar cycloaddition reaction using alkynyl acetal derivatives gave bicyclic triazolo-heterocyclic compounds, recognized as chemically modified aza-sugar analogues, in high yields under mild conditions.     

In-bulk formation of a new tetrasubstituted furan from phenolic antioxidants and dibasic lead stearate

The reaction between octadecyl 3-(3,5-di-tert-4-hydroxyphenyl)propanoate and dibasic lead stearate, two compounds added in most PVC formulations, has been investigated in bulk. The structure of the resulting product, obtained after a one-pot synthesis, was characterized by HRMS and 2D NMR analyses. The product of empirical formula C₇₀H₁₁₆O₇ has been identified as an unknown highly substituted furan. The reaction mechanism between both products to produce this original furan has been established. The first step leads to a discoloured lead IV complex with bis-quinonemethide. The second step consist of a hydrolysis during the solvent extractions or under UV exposure leading to a tetrasubstituted furan.     

Synthesis of the first examples of stable heterometallic isopropoxides of an organometallic RSn(IV) moiety

Five-, six-, and seven-coordinate volatile butyltin(IV) heterobimetallic derivatives, respectively of the types, [BuSn{(μ-OPrⁱ)₂Al(OPrⁱ)₂}Cl₂] (1), [BuSn{(μ-OPrⁱ)₂Al(OPrⁱ)₂}₂Cl] (2), and BuSn{(μ-OPrⁱ)₂M(OPrⁱ)_x − 2}₃ (3:M = Al (x = 4); 4:M = Ga (x = 4); 5:M = Nb (x = 6)) have been synthesized by the reactions of BuSnCl₃ with potassium tetraisopropoxoaluminate in 1:1, 1:2, and 1:3 molar ratios. Replacement reactions of chloride in (1) and (2) with appropriate alkoxometallate (tetraisopropoxoaluminate, tetraisopropoxogallate, or hexaisopropoxoniobate) ligands result in the formation of novel BuSn(IV) heterotri- and tetra-metallic derivatives. All of these derivatives have been characterized by elemental analyses, molecular weight measurements, and spectroscopic (IR, ¹H, ²⁷Al, and ¹¹⁹Sn NMR) studies. Based on these studies, plausible structures for the new derivatives involving bidentate ligation of the alkoxometallate ligands have been suggested.     

Ionic transport studies on (PEO)6:NaPO3 polymer electrolyte plasticized with PEG400

Conduction characteristics of the poly(ethylene oxide) based new polymer electrolyte (PEO)₆:NaPO₃, plasticized with poly(ethylene glycol) are investigated. Free standing flexible electrolyte films of composition (PEO)₆:NaPO₃ + x wt.% PEG₄₀₀ (30 ? x ? 70) are prepared by solution casting method. A combination of X-ray diffraction (XRD), optical microscopy and differential scanning calorimetry (DSC) studies have indicated enhancement in the amorphous phase of polymer due to the addition of plasticizer. Further, a reduction in the glass transition temperature observed from the DSC result has inferred increase in the flexibility of the polymer chains. The cationic transport number (t_Na⁺) of 0.42 determined through combined ac-dc technique has confirmed ionic nature of conducting species. Ionic conductivity studies are carried out as a function of composition and temperature using complex impedance spectroscopy. The electrolyte with maximum PEG₄₀₀ content has exhibited an enhancement in the conductivity of about two orders of magnitude compared to the host polymer electrolyte. The complex impedance data is analyzed in conductivity, permittivity and electric modulus formalism in order to throw light on transport mechanism. A solid state electrochemical cell based on the above polymer electrolyte with a configuration Na|SPE|(I₂ + acetylene black + PEO) has exhibited an open circuit voltage of 2.94 V. The discharge characteristics are found to be satisfactory as a laboratory cell.     

Preparation of block copolymer of poly(trimethylene carbonate) with oligo(ethylene glycol) and the surface properties of the dip coated film

To persuade the stent coating materials for the better sustainable development, a block copolymer composed of hydrophobicity of poly(trimethylene carbonate) (PTMC) and hydrophilicity of PTMC bearing ethylene glycol chains was synthesized as a potential candidate. The result of thermal stability of the polymer was analyzed which reached up to 206 °C (T₁₀) and it is considered that sufficient for sterilization during the treatment. Moreover, the dip coated films of polymer were coated on polyethylene (PE) and stainless steel (SS) substrates in order to stimulate the stability upon the physiological environment. In addition, the preliminary in vitro test of the films were evaluated by protein adsorption and blood platelet adhesion tests. Hence, this study tends to convince that the synthetic block copolymer based on PTMC derivatives were approached for stent coating materials.     

Easy separation of optically active products by enzymatic hydrolysis of soluble polymer-supported substrates

The easy separation of optically active compounds from enzymatic kinetic resolution products by simple precipitation using poly(ethylene glycol)(PEG)-supported carbonates is disclosed. The water-soluble substrate was prepared by the immobilization of (±)-1-phenylethanol onto a middle-molecular weight (av M_w 5000) monomethoxy PEG (MPEG) through a carbonate linker. The enantioselective hydrolysis using Lipase from porcine pancreas (PPL; Type II, Sigma) in a mixed solvent (hexane/buffer = 9:1) proceeded to afford the corresponding optically active compounds. In this system, the separation of the products was achieved by a simple procedure without laborious column chromatography. A hydrophobic spacer between the MPEG moiety and the carbonate linker affected both the reactivity and enantioselectivity, and the substrate with a phenylethyl spacer was hydrolyzed with the highest enantioselectivity (E value = 270).