Amphiphilic polymethacrylate derivatives as antimicrobial agents

We have investigated the structure-activity relationship of cationic amphiphilic polymethacrylate derivatives in antimicrobial and hemolytic assays. The polymers were prepared by radical copolymerizations of N-(tert-butoxycarbonyl)aminoethyl methacrylate and butyl methacrylate in the presence of methyl 3-mercaptopropionate as a chain transfer agent to give precursor polymers protected with a tert-butoxycarbonyl (Boc) group. Subsequent treatment of the Boc-protected polymers with TFA affords the desired cationic random copolymers. We examined antimicrobial and hemolytic activities of a series of polymers having a wide range of mole percentage of butyl groups (0-60%) in three different molecular weight (MW) ranges. The smallest polymers (MW < 2000) showed the lowest MIC and reduced hemolytic activity compared to that of the higher MW ones. In addition, polymers containing a high percentage of butyl groups are less selective for bacterial cells than their less hydrophobic counterparts.     

The Role of Hydrophobicity in the Antimicrobial and Hemolytic Activities of Polymethacrylate Derivatives

We synthesized cationic random amphiphilic copolymers by radical copolymerization of methacrylate monomers with cationic or hydrophobic groups and evaluated their antimicrobial and hemolytic activities. The nature of the hydrophobic groups, and polymer composition and length were systematically varied to investigate how structural parameters affect polymer activity. This allowed us to obtain the optimal composition of polymers suitable to act as non-toxic antimicrobials as well as non-selective polymeric biocides. The antimicrobial activity depends sigmoidally on the mole fraction of hydrophobic groups (f_HB). The hemolytic activity increases as f_HB increases and levels off at high values of f_HB, especially for the high-molecular-weight polymers. Plots of HC₅₀ values versus the number of hydrophobic side chains in a polymer chain for each polymer series showed a good correlation and linear relationship in the log–log plots. We also developed a theoretical model to analyze the hemolytic activity of polymers and demonstrated that the hemolytic activity can be described as a balance of membrane binding of polymers through partitioning of hydrophobic side chains into lipid layers and the hydrophobic collapsing of polymer chains. The study on the membrane binding of dye-labeled polymers to large, unilamellar vesicles showed that the hydrophobicity of polymers enhances their binding to lipid bilayers and induces collapse of the polymer chain in solution, reducing the apparent affinity of polymers for the membranes.     

Imidazolium‐based poly(ionic liquid)s with poly(ethylene oxide) main chains: Effects of spacer and tail structures on ionic conductivity

Ten types of cationic glycidyl triazole polymers (GTPs) are prepared from combinations of five alkyl‐imidazolium units (methyl‐, ethyl‐, n‐propyl‐, iso‐propyl‐, and n‐butyl‐imidazoliums) and two spacers [di‐ and tri(ethylene glycol)s]. Since these poly(ionic liquid)s are prepared from the same sample of glycidyl azide polymer by postfunctionalization method, they have the same degree of polymerization. Therefore, the structure–property relationship can be discussed without influence of molecular weight difference. The samples are characterized by NMR, differential scanning calorimetry, and thermogravimetric analysis. The ionic conductivity data are obtained by impedance measurements. The GTPs with the tri(ethylene glycol) spacer and ethyl‐ and n‐butyl‐imidazolium units afford the highest anhydrous conductivity of 1.5 × 10^?5 S cm^?1 at 30 °C. Based on electrode polarization (EP) analysis, we calculate the conducting ion (carrier) concentration and mobility. We discuss the effect of the spacer and N‐alkyl tail structures on the ionic conductivity using the data obtained by EP analysis and X‐ray diffraction. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2896–2906     

Feasibility study of red blood cell debulking by magnetic field-flow fractionation with step-programmed flow

Emerging applications of rare cell separation and analysis, such as separation of mature red blood cells from hematopoietic cell cultures, require efficient methods of red blood cell (RBC) debulking. We have tested the feasibility of magnetic RBC separation as an alternative to centrifugal separation using an approach based on the mechanism of magnetic field-flow fractionation (MgFFF). A specially designed permanent magnet assembly generated a quadrupole field having a maximum field of 1.68 T at the magnet pole tips, zero field at the aperture axis, and a nearly constant radial field gradient of 1.75 T/mm (with a negligible angular component) inside a cylindrical aperture of 1.9 mm (diameter) and 76 mm (length). The cell samples included high-spin hemoglobin RBCs obtained by chemical conversion of hemoglobin to methemoglobin (met RBC) or by exposure to anoxic conditions (deoxy RBC), low-spin hemoglobin obtained by exposure of RBC suspension to ambient air (oxy RBC), and mixtures of deoxy RBC and cells from a KG-1a white blood cell (WBC) line. The observation that met RBCs did not elute from the channel at the lower flow rate of 0.05 mL/min applied for 15 min but quickly eluted at the subsequent higher flow rate of 2.0 mL/min was in agreement with FFF theory. The well-defined experimental conditions (precise field and flow characteristics) and a well-established FFF theory verified by studies with model cell systems provided us with a strong basis for making predictions about potential practical applications of the magnetic RBC separation.

Interactions of hemoglobin in live red blood cells measured by the electrophoresis release test

To elucidate the protein–protein interactions of hemoglobin (Hb) variants A and A₂, HbA was first shown to bind with HbA₂ in live red blood cells (RBCs) by diagonal electrophoresis and then the interaction between HbA and HbA₂ outside the RBC was shown by cross electrophoresis. The starch–agarose gel electrophoresis of hemolysate, RBCs, freeze‐thawed RBCs and the supernatant of freeze‐thawed RBCs showed that the interaction between HbA and HbA₂ was affected by membrane integrity. To identify the proteins involved in the interaction, protein components located between HbA and HbA₂ in RBCs (RBC HbA‐HbA₂) and hemolysate (hemolysate HbA‐HbA₂) were isolated from the starch–agarose gel and separated by 5–12% SDS‐PAGE. The results showed that there was a ≈22 kDa protein band located in the RBC HbA‐HbA₂ but not in hemolysate HbA‐HbA₂. Sequencing by LC/MS/MS showed that this band was a protein complex that included mainly thioredoxin peroxidase B, α‐globin, δ‐globin and β‐globin. Thus, using our unique in vivo whole blood cell electrophoresis release test, Hbs were proven for the first time to interact with other proteins in the live RBC.     

Long‐subchain hyperbranched poly(aminoethyl acrylate): A potent antimicrobial polymer with low hemolytic toxicity

The emergency of antibiotic‐resistant bacteria and their wide spread has posed a worldwide threat to public health, and traditional antibiotics are gradually overwhelmed by infectious bacteria. Herein, we report an efficient and economical strategy to construct antimicrobial polymers with net cationic component and hyperbranched architecture, which exhibit highly selective toxicity toward bacteria over human cells. To this aim, cationic poly(aminoethyl acrylate) (PAEA) without hydrophobicity is chosen for low hemolysis activity and targeting the negative bacterial membranes, and hyperbranched architecture is introduced to solve the dilemma of low antimicrobial activity. Long‐subchain hyperbranched PAEA (lhb‐PAEA) samples kills >99.99% gram‐negative Escherichia coli and >98% gram‐positive Staphylococcu aureus at the dose of ≤4 μg/mL. Moreover, lhb‐PAEA samples exhibit great biocompatibility, for the hemolysis percentage was ≤35% even at the high dose of 1024 μg/mL. Thus, enhanced antimicrobial activity, reduced hemolytic toxicity, the feasible and low‐cost production are achieved for lhb‐PAEA as antimicrobial agents. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3462–3469     

Chain transfer to polymer in emulsion polymerization

Chain transfer to polymer in emulsion polymerizations of acrylate monomers and vinyl acetate has been studied using ¹³C NMR spectroscopy to elucidate the chemistry by which chain transfer occurs and to quantify the mol% branches resulting from the reaction. In emulsion polymerizations of n-butyl acrylate, ethyl acrylate and methyl acrylate, chain transfer to polymer proceeds via abstraction of hydrogen atoms from backbone tertiary C-H bonds and typically gives rise to 2-4 mol% branches in the polymers obtained at complete conversion, the level of branching increasing with reaction temperature. For these acrylates, there is no evidence for a significant difference between the extent of chain transfer to polymer. In emulsion polymerizations of vinyl acetate, chain transfer to polymer proceeds mainly via H-abstraction from methyl side-groups, though there is a small contribution from abstraction at backbone tertiary C-H bonds. The levels of branching that result are substantially lower than in acrylate emulsion polymerizations, typically being in the range 0.6-0.8 mol% in the polymers obtained at complete conversion. The level of branching increases with temperature and as the degree of monomer starving (and hence instantaneous conversion) increases. Emulsion copolymerization of vinyl acetate with a small amount (5-20 wt%) of n-butyl acrylate gives rise to a significant increase in the level of branching (to values around 1.3-1.6 mol%), which results predominantly from H-abstraction of backbone tertiary C-H bonds in n-butyl acrylate repeat units by propagating radicals with vinyl acetate end units.     

Microfluidic Device Using a Gold Pillar Array and Integrated Electrodes for On‐chip Endothelial Cell Immobilization,Direct RBC Contact,and Amperometric Detection of Nitric Oxide

We describe a microfluidic device that can be used to detect interactions between red blood cells (RBCs) and endothelial cells using a gold pillar array (created by electrodeposition) and an integrated detection electrode. Endothelial cells can release nitric oxide (NO) via stimulation by RBC‐derived ATP. These studies incorporate on‐chip endothelial cell immobilization, direct RBC contact, and detection of NO in a single microfluidic device. In order to study the RBC‐EC interactions, this work used a microfluidic device made of a PDMS chip with two adjacent channels and a polystyrene base with embedded electrodes for creating a membrane (via gold pillars) and detecting NO (at a glassy carbon electrode coated with platinum‐black and Nafion). RBCs were pharmacologically treated with treprostinil in the absence and presence of glybenclamide, and ATP release was determined as was the resultant NO release from endothelial cells. Treprostinil treatment of RBCs resulted in ATP release that stimulated endothelial cells to release on average 1.8±0.2 nM NO per endothelial cell (average±SEM, n=8). Pretreatment of RBCs with glybenclamide inhibited treprostinil‐induced ATP release and, therefore, less NO was produced by the endothelial cells (0.92±0.1 nM NO per endothelial cell, n=7). In the future, this device can be used to study interactions between many other cell types (both adherent and non‐adherent cell lines) and incorporate other detection schemes.     

Regio‐ and stereoselective cyclopolymerization of 1,2 : 4,5‐dianhydro‐3‐O‐methyl‐xylitol leading to a novel polycarbohydrate of (2→5)‐1,4‐anhydro‐3‐O‐methyl‐pentitol

(2→5)‐1,4‐Anhydro‐3‐O‐methyl‐pentitol, which is a novel carbohydrate polymer without an anomeric linkage, was synthesized by cationic cyclopolymerization of 1,2 : 4,5‐dianhydro‐3‐O‐methyl‐xylitol. When BF₃·OEt₂ was used as the initiator, soluble polymers were obtained in 28 to 50% yield. These polymers have number‐average molecular weights of 1 150 to 2 340 corresponding to an average degree of polymerization of 8.8 to 18.0. It was confirmed by ¹³C NMR that the resulting polymer mainly consists of 1,4‐anhydro‐3‐O‐methyl‐D L ‐arabinitol units.     

Metallophilic interactions in polymeric group 11 thiols

Three polymeric group 11 transition metal polymers featuring metallophilic interactions were obtained directly via self-assembly of metal ions and 4-pyridinethiol ligands. In the cationic [Cu₂(S-pyH)₄]_n²⁺ with [ZnCl₄]_n²⁻ counterion (1) and in the neutral [Ag(S-py) (S-pyH)]_n (2) 4-pyridinethiol (S-pyH) and its deprotonated form (S-py) are coordinated through the sulfur atom. Both ligands are acting as bridging ligands linking the metal centers together. In the solid state, the gold(I) polymer [Au(S-pyH)₂]Cl (3) consists of the repeating cationic [Au(S-pyH)₂]⁺ units held together by aurophilic interactions. Compound 1 is a zig-zag chain, whereas the metal chains in the structures of 2 and 3 are linear. The protonation level of the thiol ligand had an impact on the crystallization of polymers. Both nature of the metal center and reaction conditions affected the polymerization. QTAIM analysis confirmed direct metal-metal contacts only in polymers 1 and 3. In polymer 2, no theoretical evidence of argentophilic contacts was obtained even though the Ag⋅⋅⋅Ag distance was found to be less than sum of the Bondi's van der Waals radius of silver.     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Synthesis and Characterization of a Water‐Soluble Carboxylated Polyfluorene and Its Fluorescence Quenching by Cationic Quenchers and Proteins

We have developed a new intermediate monomer, 2,7‐[bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)‐9,9‐bis(3‐(tert‐butyl propanoate))]fluorene, that allows the easy synthesis of water‐soluble carboxylated polyfluorenes. As an example, poly[9,9′‐bis(3′′‐propanoate)fluoren‐2,7‐yl] sodium salt was synthesized by the Suzuki coupling reaction, and the properties of the polymer were studied in aqueous solutions of different pH. Fluorescence quenching of the polymer by different cationic quenchers (MV²⁺, MV⁴⁺, and NO₂MV²⁺; MV=methyl viologen) was studied, and the quenching constants were found to be dependent on the charge and electron affinity of the quencher molecule and the pH of the medium. The largest quenching constant was observed to be 1.39×10⁸ M ^?1 for NO₂MV²⁺ at pH 7. The change in polymer fluorescence upon interaction with different proteins was also studied. Strong fluorescence quenching of the polymer was observed in the presence of cytochrome c, whereas weak quenching was observed in the presence of myoglobin and bovine serum albumin. Lysozyme quenched the polymer emission at low protein concentrations, and the quenching became saturated at high protein concentrations. Under similar experimental conditions, the polymer showed improved quenching efficiencies toward cationic quenchers and a more selective response to proteins relative to other carboxylated conjugated polymers.     

Liquid crystal alignment properties of 2-naphthoxymethyl-substituted polystyrenes

The liquid crystal (LC) alignment properties of LC cells fabricated with films of 2-naphthoxymethyl-substituted polystyrenes with different contents of naphthoxymethyl side groups were investigated. The polymer films exhibited good optical transparency in the visible light region (400–700 nm). The LC cells made from the unrubbed films of polymers having more than 57 mol%?of 2-naphthoxymethyl containing monomeric units showed homeotropic LC alignment with a high pretilt angle of about 90^o. Good electro-optical characteristics, such as the threshold voltage, response time, voltage holding ratio and residual DC voltage were observed for the LC cells fabricated with the polymer having 100 mol%?of 2-naphthoxymethyl containing monomeric units as an LC alignment layer.     

Tuning the hemolytic and antibacterial activities of amphiphilic polynorbornene derivatives

Amphiphilic cationic polynorbornene derivatives, soluble in water, were prepared from modular norbornene monomers, with a wide range of molecular weights (M(n) = 1600-137 500 g/mol) and narrow polydispersities (PDI = 1.1-1.3). The antibacterial activity determined by growth inhibition assays and the hemolytic activity against human red blood cells were measured and compared to determine the selectivity of the polymers for bacterial over mammalian cells. The effects of monomer repeat unit hydrophobicity and polymer molecular weight on antibacterial and hemolytic activities were determined. The hydrophobicity of the repeat unit was observed to have dramatic effects on antibacterial and hemolytic activities. Lipid membrane disruption activities of the polymers was confirmed by measuring polymer-induced dye leakage from large unilamellar vesicles. By tuning the overall hydrophobicity of the polymer through random copolymerizations of modular norbornene derivatives, highly selective, nonhemolytic antibacterial activities were obtained. For appropriate monomer composition, selectivity against bacteria versus human red blood cells was determined to be over 100.     

A novel insertion reaction of epoxy compounds into phenyl ester linkages in polymer chains

The insertion reaction of various epoxy compounds such as phenyl glycidyl ether (PGE), methyl glycidyl ether, butyl glycidyl ether (BGE), and styrene oxide into the phenyl ester linkage in the polymer chain was investigated using quaternary ammonium salts as catalysts in diglyme, anisole, sulfolane, o-dichlorobenzene, or DMSO at 100–150°C. The reaction of PGE with poly[4-(4-nitrobenzoyloxy)styrene] (polymer 1a ) proceeded almost quantitatively to give the corresponding polymer using tetrabutylammonium bromide (TBAB) as catalyst in diglyme at 100°C for 24 h. The reactions of BGE with poly(4-nitrophenyl methacrylate), and copolyarylate derived from 2,2-bis(4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane and iso- and terephthaloyl chlorides also produced the corresponding polymers with 86 and 89 mol% new structural units, respectively, using TBAB in sulfolane at 150°C for 24 h. Furthermore, it was found that the degree of insertion of the epoxy compound into the ester linkage in the polymer chain was affected by the kind of epoxy compound, reaction solvent, catalyst concentration, substituent group on the phenyl ester, and structure of the polymer. Chiral polymers were also synthesized with high degrees of insertion by the reaction of chiral epoxides such as (R)-1,2-epoxyhexane, (R)-1,2-epoxyheptane, and (R)-1,2-epoxydecane with polymer 1a and poly(2,4-dichlorophenyl methacrylate) using TBAB in diglyme at 120°C for 24 h.     

Photohemolysis Sensitized by the Furocoumarin Derivative Alloimperatorin and its Hydroperoxide Photooxidation Product

The dark and photosensitized effects of alloimperatorin methyl ether 1 (hereafter simply alloimperatorin) and its photooxygenation product alloimperatorin hydroperoxide 2 were investigated on human erythrocytes. The results reveal that the furocoumarin 1 photosensitizes efficiently the hemolysis of erythrocytes. The rate of photohemolysis increases on raising the temperature of the postirradiated incubation from 4°C to 37°C. Thermal activation of the photohemolysis and inhibition by 2,6‐di‐tert‐butyl‐p‐cresol (BHT) suggest that the furocoumarin 1 photosensitizes lipid peroxidation, increasing permeability in the erythrocyte membrane. The hydroperoxide 2 induces dark and photosensitized hemolysis more efficiently than the furocoumarin 1. The rate of hemolysis induced by 2 increases with the incubation temperature and decreases in the presence of tert‐butanol and BHT. The hydroperoxide 2 photosensitizes the formation of lipid peroxidation products as shown by the reaction with thiobarbituric acid. This process is diminished by BHT. Our data imply that the photohemolysis sensitized by the furocoumarin 1 is caused by the in situ‐formed photooxygenation product 2. Such hydroperoxides are potent hemolytic agents in the dark and especially on photosensitization.     

Simultaneous determination of cell aging and ATP release from erythrocytes and its implications in type 2 diabetes

Glucose-6-phosphate dehydrogenase (G6PD) is a determinant in the antioxidant status of the red blood cell (RBC) and is also used as an indicator of cell age. However, it is unknown if the relationship among antioxidant status, cell age, and RBC-derived adenosine triphosphate (ATP) occurs immediately or over a period of time. Therefore, the development of a simultaneous determination of G6PD activity (via the determination of nicotinamide adenine dinucleotide phosphate (NADPH)) in RBCs and the determination of deformation-induced RBC-derived ATP is described. The NADPH and ATP were determined while undergoing a chemically induced aging process via inhibition of G6PD with dehydroepiandroesterone (DHEA). Upon incubation with DHEA for 30 min, NADPH levels measured in a flow stream decreased to 7.96 ± 1.10 μM from an original value of 13.20 ± 1.80 μM in a 0.02% solution of RBCs. In order to demonstrate a direct relationship between G6PD activity and deformation-induced ATP release from RBCs, a simultaneous microflow determination of G6PD activity and ATP release was performed. Upon inhibition with DHEA, NADPH levels decreased to 8.62 ± 0.29 μM from its original value of 12.73 ± 0.50 μM while ATP release decreased from 0.21 ± 0.07 μM to 0.06 ± 0.02 μM. These values were validated by an examination of NADPH levels in, and ATP release from, RBC fractions containing younger and older cells (separated by cell density centrifugation). This determination provides evidence that antioxidant status in the RBC and its ability to release ATP, a known stimulus of nitric oxide production, are closely related.     

Studies on polymers from cyclic dienes. XII. Cationic polymerization of spiro[2,4]hepta-4,6-diene

Polymerizations of spiro[2,4]hepta-4,6-diene were carried out with cationic initiators and Ziegler-type catalysts. This monomer polymerized very rapidly with a variety of cationic initiators, and low monomer and initiator concentrations had to be employed in order to avoid formation of crosslinked polymers. The polymer contained 1,2 and 1,4 addition units, and there was no indication of the opening of the cyclopropyl ring in the monomer unit. The following relationship was obtained: [η] = 4.5 × 10^?8M?_n^1.71. The exponential coefficient of this equation is much greater than those typical of vinyl polymers, suggesting that the polymer chain is very stiff. The polymer showed much enhanced resistance to autoxidation as compared with polycyclopentadiene, and its softening point was above 200°C. These interesting physical and chemical properties of the monomer and the polymer can be associated with their spiro structures.     

Liquid crystal alignment behaviours on poly(methyl methacrylate) having polyhedral oligomeric silsesquioxane groups

A series of poly(methyl methacrylate) derivatives containing polyhedral oligomeric silsesquioxane (POSS) groups (MCP#) were synthesised via free radical polymerisation (FRP) using methacryl isobutyl POSS (MA-POSS) and methyl methacrylate as monomers to investigate liquid crystal (LC) alignment property of these polymer films. The LC cells made from the films of the polymers having 100 mol% of MA-POSS units (MCP100) showed vertical LC alignment having a pretilt angle of about 90°. The vertical LC alignment behaviour on the MCP100 film was ascribed to the very hydrophobic MCP100 surface having the surface energy value smaller than about 23 mJ/m² generated by the nonpolar bulky POSS group. Good electro-optical characteristics, such as voltage holding ratio (VHR) and residual DC voltage (R-DC), were observed for the LC cells fabricated using MCP100 as a LC alignment layer.     

Radical polymerization of various alkyl methacrylates in liquid crystalline solvents

The polymerization of methacrylates of methyl, ethyl, butyl, hexyl, octyl, dodecyl, and octadecyl alcohols was studied with 2,2′-azobisisobutyronitrile in the smectic, nematic, cholesteric, and isotropic liquid phases at 50–75°C. N-(4-Methoxyphenylmethylene)phenylamine, N-(4-ethoxyphenyl-methylene)-4-butylphenylamine, cholesteryl octadecanoate, and benzene were used as the solvents. The viscosities of the polymers were enhanced in the mesomorphic solvents. The polymer was converted to the corresponding poly(methyl methacrylate) through hydrolysis and esterification. Tacticities of the resultant poly(methyl methacrylates) were determined by nuclear magnetic resonance spectroscopy. The isotacticities of the polymers obtained in the smectic and the nematic phases were basically the same and appeared to be larger than those of the polymers in the cholesteric and isotropic liquid states. The polymerization of the methacrylates of butyl and longer-chain alcohols deviated from Bernoullian statistics and gave polymers more isotactic than those of methyl and ethyl methacrylates.