Synthesis and characterization of copper(II), cobalt(II), nickel(II), and iron(III) complexes with two diamine Schiff bases and catalytic reactivity of a chiral diamine cobalt(II) complex

New transition metal complexes of Co(II), Cu(II), Ni(II), and Fe(III) of the ligands 6,6′-(1E,1′E)-(4,5-dimethyl-1,2-phenylene)bis(azan-1-yl-1-ylidene)bis(methan-1-yl-1-ylidene)bis(7-hydroxy-5-methoxy-2-methyl-4H-chromen-4-one) H₂L¹ and 6,6’-(1E,1′E)-cyclohexane-1,2-diylbis(azan-1-yl-1-ylidene)bis(methan-1-yl-1-ylidene)bis(7-hydroxy-5-methoxy-2-methyl-4H-chromen-4-one) H₂L² have been prepared and characterized using physio-chemical and spectroscopic methods. The results obtained for the complexes indicated that the geometries of the metal centres are either square planar or octahedral. Cyclopropanation reactions of unactivated olefins by ethyldiazoacetate (EDA) in the presence of [L¹Cu]·H₂O, [L²Cu]·2H₂O and [L²*Co]·2H₂O as catalysts were examined. The results showed that only [L²*Co]·2H₂O can act as a catalyst for the cyclopropanation reaction of unactivated olefins with very high selectivity (up to 99% based on EDA).     

Monodentate aminophosphine nickel(II)‐ and palladium(II)‐catalyzed ethylene oligomerization and norbornene polymerization

Nickel(II) and palladium(II) complexes of monodentate aminophosphine ligands were prepared and characterized. In ethylene oligomerization and subsequent Friedel–Crafts alkylation of toluene, the Ni(II) complexes Ni‐1 and Ni‐2 were activated with aluminium co‐catalysts and generated tandem catalysts with high activities (up to 1.1 × 10⁶ g (mol Ni)^?1 h^?1) which are comparable with those of previously reported bidentate Ni(II) catalysts. The Pd(II) precatalyst Pd‐1 showed high activities (up to 2.0 × 10⁵ g (mol Pd)^?1 h^?1) in the polymerization of norbornene.     

Role of Water in the Catalysis of Ethylene Di- and Oligomerization and Toluene Alkylation Reactions Based on Nickel Bis(Acetylacetonate) Systems

It is established that the turnover frequency and number of Ni(acac)₂–50Et₂AlCl or Ni(acac)₂–50Et₂AlCl · EtAlCl₂-based systems in ethylene oligomerization processes depend on the concentration of the water in toluene. The possibility of the alkylation of toluene, used as a solvent under the considered reaction condition, is shown. The main reactions describing the role of water at the stage of the formation and functioning of catalytically active hydride nickel complexes are proposed.     

Complexes of Mn(II), Co(II), Ni(II) and Cu(II) with 4,4'-bipyridine and dichloroacetates

New mixed-ligand complexes with empirical formulae M(4-bpy)L₂·1.5H₂O (M(II)=Mn, Co), Ni(4-bpy)₂L₂ and Cu(4-bpy) L₂·H₂O (where: 4-bpy=4,4'-bipyridine, L=CC L2HCOO^-) have been isolated in pure state. The complexes have been characterized by elemental analysis, ir spectroscopy, conductivity (in methanol, dimethylformamide and dimethylsulfoxide solutions) and magnetic and x-ray diffraction measurements. The Mn(II) and Co(II) complexes are isostructural. The way of metal-ligand coordinations discussed. the ir spectra suggest that the carboxylate groups are bonded with metal(II) in the same way (Ni, Cu) or in different way (Mn, Co). The solubility in water is in the order of 19.40·10^-3÷1.88·10^-3ł mol dm^-3ł. During heating the hydrate complexes lose all water in one step. The anhydrous complexes decompose to oxides via several intermediate compounds. A coupled TG-MS system was used to analyse the principal volatile products of obtained complexes. The principal volatile products of thermal decomposition of complexes in air are: H₂O₂ ⁺, CO₂ ⁺, HCl⁺, Cl₂ ⁺, NO⁺ and other. This revised version was published online in July 2006 with corrections to the Cover Date.     

The reactions of nickel(II) carboxylates with a series of ethylaluminum chlorides

The distribution of nickel in the reaction products from the reactions of nickel(II) stearate with diethylaluminum chloride (Et₂AlCl), ethylaluminum sesquichloride (Et₃Al₂Cl₃), and ethylaluminum dichloride (EtAlCl₂) in benzene was investigated as a function of the Al/Ni reaction stoichiometry. The products consist of benzene-soluble nickel complexes and a precipitate from which can be extracted NiCl₂ and metallic nickel. The percentage of each product is seen to be dependent upon the Al/Ni reaction ratio and the aluminum compound employed in the reaction. It was found that in each case six alkylaluminums are required for complete reaction with one nickel(II) stearate molecule. The compunds Et₂AlCl, Et₃Al₂Cl₃, and EtAlCl₂ were all found to have greater reducing ability than Et₃Al at room temperature. Alternative interpretations of the chloro compounds' greater reducing abilities are discussed.     

Preparation and spectral characterization of new macrocyclic Ni(II) and Co(II) complexes derived from 1,4- bis (2-carboxyaldehydephenoxy)butane and various diamines

Six new macrocyclic complexes were synthesized by the template effect from reaction of 1,4-bis(2-carboxyaldehydephenoxy)butane, Ni(NO₃)₂ · 6H₂O or Co(NO₃)₂ · 6H₂O and various diamines. The metal-to-ligand ratios of Ni(II) or Co(II) metal complexes were found to be 1 : 1. Coordination of the Schiff base to Ni(II) and Co(II) through the two nitrogen and two oxygen atom (ONNO) are expected to reduce the electron density in the azomethine link and hydroxyl group. The Ni(II) and Co(II) complexes are proposed to be tetrahedral and are 1 : 2 electrolytes as shown by their molar conductivities (Λ_M) in DMF (dimethyl formamide) at 10^?3 M. The structures are proposed from elemental analysis, FT-IR, UV-VIS, magnetic susceptibility measurements, molar conductivity measurements, and mass spectra.     

Bulky iminophosphine-based nickel and palladium catalysts bearing 2,6-dibenzhydryl groups for ethylene oligo-/polymerization

A series of 2,6-dibenzhydryl substituted bulky Ni and Pd complexes containing P,N-chelating ligands, {[2,6-(Ph₂CH)₂-4-R-C₆H₂-N=CH-C₆H₄-2-PPh₂]MX₂; MX₂ =NiBr₂; R = Me ( Ni1 ); R = F ( Ni2 ); MX₂ =PdCl₂, R = Me ( Pd1 )}, have been prepared and used as catalyst precursors for ethylene oligo-/polymerization. Compared to the corresponding 2,6-diisopropyl Ni catalyst, these bulky Ni precatalysts activated by Et₂AlCl exhibited excellent catalytic performance toward ethylene polymerization with activity of up to 1.90 × 10⁵ g PE (mol Ni)⁻¹ h⁻¹, and result in semicrystalline PEs with high molecular weight. The catalytic performance of these bulky P,N-type complexes was significantly improved by introducing two ortho-dibenzhydryl on the N-aryl substituents. However, the formation of C₁₀–C₂₄ oligomers were generated using their palladium catalysts through ethylene oligomerization at high temperatures.     

Complexes of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) with 4-chloro-2-methoxybenzoic acid anion

The complexes of 4-chloro-2-methoxybenzoic acid anion with Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ were obtained as polycrystalline solids with general formula M(C₈H₆ClO₃)₂·nH₂O and colours typical for M(II) ions (Mn – slightly pink, Co – pink, Ni – slightly green, Cu – turquoise and Zn – white). The results of elemental, thermal and spectral analyses suggest that compounds of Mn(II), Cu(II) and Zn(II) are tetrahydrates whereas those of Co(II) and Ni(II) are pentahydrates. The carboxylate groups in these complexes are monodentate. The hydrates of 4-chloro-2-methoxybenzoates of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) heated in air to 1273 K are dehydrated in one step in the range of 323–411 K and form anhydrous salts which next in the range of 433–1212 K are decomposed to the following oxides: Mn₃O₄, CoO, NiO and ZnO. The final products of decomposition of Cu(II) complex are CuO and Cu. The solubility value in water at 293 K for all complexes is in the order of 10^–3 mol dm^–3. The plots of χ_M vs. temperature of 4-chloro-2-methoxybenzoates of Mn(II), Co(II), Ni(II) and Cu(II) follow the Curie–Weiss law. The magnetic moment values of Mn²⁺, Co²⁺, Ni²⁺ and Cu²⁺ ions in these complexes were determined in the range of 76−303 K and they change from: 5.88–6.04 μ_B for Mn(C₈H₆ClO₃)₂·4H₂O, 3.96–4.75 μ_B for Co(C₈H₆ClO₃)₂·5H₂O, 2.32–3.02 μ_B for Ni(C₈H₆ClO₃)₂·5H₂O and 1.77–1.94 μ_B for Cu(C₈H₆ClO₃)₂·4H₂O.     

含有NH2CH2CH2CH2NH2和o-C6H4(NH2)2配体的镍配合物的合成、结构和它们在乙烯聚合中的作用

两种镍的配合物[Ni(NH2CH2CH2CH2NH2)3]Cl2 (1)和[Ni(C6H4N2H4)2Cl2] (2)已经被合成并且通过红外和单晶X射线衍射分析对其进行了表征。在配合物1中,镍原子处于手性假八面体[NiN6]的几何构型中,它与三个1,3-丙二胺分子形成了三个六元环。在配合物2中,镍原子除了与两个o-苯二胺分子通过四个Ni-N键形成两个五元环外,它还与两个Cl原子配位形成了反式Ni-Cl2,这不同于以往报道过的镍的二胺配合物。这两个镍的配合物被MAO, MMAO或Et2AlCl活化后,对乙烯的二聚合或三聚合显示了很好的催化活性[对于配合物2,催化活性达到3.59×106 g mol-1 (Ni) h-1]。     

Spectral and Thermal Studies of Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) Complexes with 3-methylglutaric Acid

Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) 3-methylglutarates were prepared as solids with general formula MC₆ H₈ O₄ ×n H₂ O, where n =0–8. Their solubilities in water at 293 K were determined (7.0×10⁻² −4.2×10⁻³ mol dm⁻³ ). The IR spectra were recorded and thermal decomposition in air was investigated. The IR spectra suggest that the carboxylate groups are mono- or bidentate. During heating the hydrated complexes lose some water molecules in one (Mn, Co, Ni, Cu) or two steps (Cd) and then mono- (Cu) or dihydrates (Mn, Co, Ni) decompose to oxides directly (Mn, Cu, Co) or with intermediate formation of free metals (Co, Ni). Anhydrous Zn(II) complex decomposes directly to the oxide ZnO. This revised version was published online in July 2006 with corrections to the Cover Date.     

Complexes of Co(II), Ni(II), and Cu(II) chlorides and bromides with tetrazol-1-yl-tris(hydroxymethyl)methane: Synthesis and structure

The reactions of Co(II), Ni(II), and Cu(II) chlorides and bromides and their metallic powders with tetrazol-1-yl-tris(hydroxymethyl)methane (L) afforded new complexes ML₂Hal₂ · mH₂O(M = Co(II) or Ni(II), Hal = Cl⁻; M = Cu(II), Hal = Cl⁻ or Br⁻, m = 0; and M = Co(II) or Ni(II), Hal = Br⁻, m = 2), MLnCl₂ (M = Co(II) or Ni(II), n = 2 or 4; M = Cu(II), n = 2), and MLnBr₂ · mH₂O (M = Ni(II), n = 2, m = 2; M = Cu(II), n = 2, m = 0). The compositions and structures of the synthesized complexes were determined by elemental analysis, IR spectroscopy (50–4000 cm⁻¹), and X-ray diffraction analysis. The introduction of a bulky substituent into position 1 of the tetrazole cycle was shown to exert almost no effect on the coordination mode but affected the composition and structure of the complexes.     

Novel cyclohexyl‐substituted salicylaldiminato–nickel(II) complex as a catalyst for ethylene homopolymerization and copolymerization

The cyclohexyl‐substituted salicylaldiminato–Ni(II) complex [O? (3‐C₆H₁₁)(5‐CH₃)C₆H₂CH?N‐2,6‐C₆H₃ⁱPr₂]Ni(PPh₃)(Ph) ( 4 ) has been synthesized and characterized with ¹H NMR and X‐ray structure analysis. In the presence of phosphine scavengers such as bis(1,5‐cyclooctadiene)nickel(0) [Ni(COD)₂], triisobutylaluminum (TIBA), and triethylaluminum (TEA), 4 is an active catalyst for ethylene polymerization and copolymerization with the polar monomers tert‐butyl‐10‐undecenoate, methyl‐10‐undecenoate, and 4‐penten‐1‐ol under mild conditions. The polymerization parameters affecting the catalytic activity and viscosity‐average molecular weight of polyethylene, such as the temperature, time, ethylene pressure, and catalyst concentration, are discussed. A polymerization activity of 3.62 × 10⁵ g of PE (mol of Ni h)^?1 and a weight‐average molecular weight of polyethylene of 5.73 × 10⁴ g^.mol^?1 have been found for 10 μmol of 4 and a Ni(COD)₂/ 4 ratio of 3 in a 30‐mL toluene solution at 45 °C and 12 × 10⁵ Pa of ethylene for 20 min. The polydispersity index of the resulting polyethylene is about 2.04. After the addition of tetrahydrofuran and Et₂O to the reaction system, 4 exhibits still high activity for ethylene polymerization. Methyl‐10‐undecenoate (0.65 mol %), 0.74 mol % tert‐butyl‐10‐undecenoate, and 0.98 mol % 4‐penten‐1‐ol have been incorporated into the polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6071–6080, 2004     

Template synthesis and physicochemical studies of 14-membered hexaazmacrocyclic complexes with Co(II), Ni(II), Cu(II) and Zn(II): a comparative spectroscopic approach on DNA binding with Cu(II) and Ni(II) complexes

A new series of 14-membered pendant arm hexaazamacrocyclic complexes of the type [MLX₂] · [M = Co(II), Ni(II), Cu(II) or Zn(II) for X = Cl; Co(II), Ni(II), Cu(II) or Zn(II) for X = NO₃] has been synthesized by metal template condensation of 1,2-phenylenediamine and 1,4-phenylenediamine with formaldehyde in methanol. The mode of bonding and overall geometry of these complexes have been deduced by elemental analyses, molar conductance values, FT-IR, ¹H-NMR, ¹³C-NMR, EPR, ESI-mass and UV–VIS along with magnetic measurement studies. The fluorescence and UV–VIS studies revealed a significant binding ability to DNA.     

Ionic liquid-phase asymmetric catalytic hydrogenation: hydrogen concentration effects on enantioselectivity

Molecular hydrogen is almost four times more soluble in the ionic liquid 1-n-butyl-3-methylimidazolium tetrafluoroborate (BMI·BF₄) than in its hexafluorophosphate (BMI·PF₆) analogue at the same pressure. The Henry coefficient solubility constant for the solution BMI·BF₄/H₂ is K=3.0×10⁻³ mol L⁻¹ atm⁻¹ and 8.8×10⁻⁴ mol L⁻¹ atm⁻¹ for BMI·PF₆/H₂, at room temperature. The asymmetric hydrogenation of (Z)-α-acetamido cinnamic acid and kinetic resolution of (±)-methyl-3-hydroxy-2-methylenebutanoate by (−)-1,2-bis((2R,5R)-2,5-diethylphospholano)benzene(cyclooctadiene)rhodium(I) trifluoromethanesulfonate and dichloro[(S)-(−)-2,2′-bis(di-p-tolylphosphino)-1,1′-binaphthyl]ruthenium(II) complexes immobilised in BMI·PF₆ and BMI·BF₄ were investigated. Remarkable effects in the conversion and enantioselectivity of these reactions were observed as a function of molecular hydrogen concentration in the ionic phase rather than pressure in the gas phase.     

Fast Simultaneous Adsorptive Stripping Voltammetric Determination of Ni(II) and Co(II) at Lead Film Electrode Plated on Gold Substrate

A fast adsorptive stripping voltammetric procedure for simultaneous determination of Ni(II) and Co(II) in the presence of nioxime as a complexing agent at an in situ plated lead film electrode was described. The time of determination of these ions was shortened due to the application of gold as a substrate for lead film. At gold substrate lead film formation and accumulation of Ni(II) and Co(II) complexes with nioxime proceeds simultaneously. To obtain a stable signals for both ions a simple procedure of activation of the electrode was proposed. Calibration graphs for an accumulation time of 20 s were linear from 5×10^?9 to 1×10^?7 mol L^?1 and from 5×10^?10 to 1×10^?8 mol L^?1 for Ni(II) and Co(II), respectively. The procedure with the application of a lead film electrode on a gold substrate was validated in the course of Ni(II) and Co(II) determination in certified reference materials.     

Strained Diphosphines Built upon a Calix[4]arene Skeleton. Synthesis of a Highly Active Norbornene Polymerization Catalyst

Summary: The complexes cis‐P,P′‐(η⁵‐cylopentadienyl)‐{5,17‐dibromo‐11,23‐bis(diphenylphosphino)‐25,26,27,28‐tetrapropoxy‐calix[4]arene}nickel(II ) tetrafluoroborate ( 1 ) and dibromo‐{5,17‐dibromo‐11,23‐bis(diphenylphosphino)‐25,26,27,28‐tetrapropoxycalix[4]arene}nickel(II ) ( 2 ), both of which contain a constrained chelating diphosphine, were evaluated for the polymerization of norbornene. Combined with methylaluminoxane, they result in remarkably active systems for the production of high‐molar‐mass vinyl‐type polynorbornene. Turnover frequencies of up to 7.5 × 10⁵ mol(NBE) · mol(Ni)⁻¹ · h⁻¹ are observed. A plausible explanation for their high performances relies on a periodic P–Ni–P bite angle enlargement that temporarily increases the steric hindrance about the catalytic centre, which in turn favours the insertion steps.

Molecular structure of 2 .     

Volume dependence of thermal conductivity and bulk modulus for poly(propylene glycol)

The thermal conductivity λ and heat capacity per unit volume of poly(propylene glycol) PPG (0.4 and 4.0 kg·mol⁻¹ in number-average molecular weight) have been measured in the temperature range 150–295 K at pressures up to 2 GPa using the transient hot-wire method. At 295 K and atmospheric pressure, λ = 0.147 W m⁻¹K⁻¹ for PPG (0.4 kg·mol⁻¹) and λ = 0.151 W m⁻¹K⁻¹ for PPG (4.0 kg·mol⁻¹). The temperature dependence of λ is less than 4 × 10⁻⁴ W m⁻¹K⁻² for both molecular weights. The bulk modulus has been measured in the temperature range 215–295 K up to 1.1 GPa. At atmospheric pressure, the room temperature bulk moduli are 1.97 GPa for PPG (0.4 kg·mol⁻¹) and 1.75 GPa for PPG (4.0 kg·mol⁻¹). These data were used to calculate the volume dependence of $ \lambda ,g\, = - \left( {\frac{{\partial \lambda /\lambda }}{{\partial V/V}}} \right)_T $. At room temperature and atmospheric pressure (liquid phase) we find g = 2.79 for PPG (0.4 kg·mol⁻¹) and g = 2.15 for PPG (4.0 kg·mol⁻¹). The volume dependence of g, (∂g/∂ log V)_T varies between −19 to −10 for both molecular weights. Under isochoric conditions, g is nearly independent of temperature. The difference in g between the glassy state and liquid phase is small and just outside the inaccuracy of g of about 8%. The theoretical model for λ by Horrocks and McLaughlin yields an overestimate of g by up to 120%. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 345–355, 1998     

Assembled Porphyrin-Based Multinuclear Ruthenium(II)-NNNN Complex Catalysts for Transfer Hydrogenation of Ketones

Multinuclear porphyrin-based ruthenium(II)-NNNN complexes were efficiently assembled by means of coordinatively unsaturated 16-electron mononuclear ruthenium(II)-pyrazolyl-imidazolyl-pyridine complex, zinc(II) meso-tetra(4-pyridyl)-porphyrin (ZnTPyP), and 4,4′-linked bipyridines. The resultant multinuclear (Ru₄ and Ru₈) porphyrin-based ruthenium(II)-NNNN complexes exhibited exceptionally high catalytic activity at as low as 0.008 mol % Ru loading for the transfer hydrogenation reaction of ketones in refluxing 2-propanol, reaching up to 99 % yields and 5.7×10⁶ h⁻¹ TOFs.     

Cobalt complexes based on dendritic PAMAM bridged salicylaldimine ligands: Synthesis,characterization and performance in ethylene oligomerization

Two novel dendritic poly(amido-amine) (PAMAM) bridged salicylaldimine ligands were synthesized by Schiff base reaction using 1.0 generation dendritic PAMAM as bridged groups. The cobalt complex with 1,4-butanediamine as core (C1) and the cobalt complex with 1,6-hexanediamine as core (C2) based on dendritic PAMAM bridged salicylaldimine ligands were prepared by metallic coordination reaction, respectively. The structures of the ligands and the dendritic cobalt complexes were characterized by fourier transform infrared (FTIR), ultraviolet spectra (UV), hydrogen nuclear magnetic resonance (¹H NMR) and electrospray ionization mass spectra (ESI-MS). The complexes C1 and C2 were evaluated as catalyst precursors for ethylene oligomerization after being activated with methylaluminoxane (MAO), diethylaluminum chloride (Et₂AlCl), ethylaluminium dichloride (EtAlCl₂) and ethylaluminum sesquichloride (EASC). The dendritic cobalt complexes exhibited the highest activity and selectivity for high carbon oligomers with EASC as activator. Under the conditions of 1.0 MPa, 25°C and Al/Co molar ratio 1500, the catalytic activity and selectivity for C₁₀–C₂₀ using C1 were 3.44×10⁶ g·(mol Co·h)^?1 and 76.53% after activation with EASC, and the catalytic activity and selectivity for C₁₀–C₂₀ using C2 were 3.42×10⁶ g·(mol Co·h)^?1 and 84.50%, respectively.     

Olefin polymerization behavior of titanium(IV) alkoxo complexes with fluorinated diolate ligands: The impact of the chelate ring size and the nature of organoaluminum compounds

Titanium(IV) coordination compounds are effectively used as precatalysts for ethylene polymerization and copolymerization with other olefins. New titanium(IV) complexes 3b – d with ligands containing two diphenylcarbinol fragments linked by the perfluorinated hydrocarbon units –CF₂– or –C₂F₄– were synthesized. The structures of complexes 3b and 3d were determined by X-ray diffraction. Titanium atoms in 3b have a distorted trigonal-bipyramidal coordination environment while spiro-complex 3d is characterized by tetrahedral molecular geometry. The catalytic behavior of complexes activated by mixtures of Bu₂Mg and alkylaluminium chlorides from among Me₂AlCl, Et₂AlCl, EtAlCl₂, and Et₃Al₂Cl₃ were studied. The resulting catalytic systems catalyze ethylene polymerization to afford ultra-high molecular weight polyethylene, suitable for modern processing methods, and the solvent-free solid state formation of super high-strength (1.37–2.75 GPa) and high-modulus (up to 138 GPa) oriented film tapes. The same catalytic systems catalyze ethylene copolymerization with 1-hexene to afford high molecular weight semicrystalline elastomeric polymers containing up to 20% of comonomer units.