A comparison of the properties of two structurally equivalent but regiochemically different mono‐alkylated polybithiophenes prepared through AABB‐type stille polycondensation

Previous routes to polymers with mono‐alkylated bithiophenes have proceeded through polymerization of monoalkyl‐2,2′‐bithiophene monomers through oxidative or AB‐type cross‐coupling polymerizations. The resulting polymer regiochemistry affects both the location and orientation of the polymer side‐chains. In contrast, AABB‐type cross‐coupling polymerizations can control the location and in some cases the orientation of the side‐chains. To study how this control can impact polymer properties, two poly(monodecyl‐2,2′‐bithiophene) polymers have been synthesized through Stille AABB‐type polycondensations of 2,5‐bis(trimethylstannyl)thiophene with different monomers. The alkyl side‐chains are located on every other thiophene, but polymer 1 consists of both head‐to‐tail and head‐to‐head dyads, whereas polymer 2 is made up of only head‐to‐head dyads. ¹H NMR, ¹³C NMR, and heteronuclear single quantum correlation spectroscopy are used to confirm and contrast the polymer regiochemistries. The physical properties of the two polymers are analyzed using UV–vis spectroscopy, differential scanning calorimetry, and grazing‐incidence X‐ray diffraction. Polymer 2 is found to display significantly more aggregation in solution than 1, and it displays different thermal properties. The film properties of polymers 1 and 2, however, are very similar, with nearly identical UV–vis profiles and d‐spacing values as determined by grazing incidence X‐ray diffraction. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,Photophysical and Electrochemical Properties,and Self‐assembly Behavior of Two Hexaazatriphenylene Derivatives: A Single Bond Makes a Big Difference

A hexaazatriphenylene (HAT) derivative (compound 1 ) that bears four n‐octyl chains and two thienyl groups was designed and synthesized. Further light‐induced oxidation coupling reaction led to thienyl‐fused compound 2 . Their photophysical and electrochemical properties and self‐assembly behavior have been investigated by UV/Vis, fluorescence, and ¹H NMR spectroscopies, cyclic voltammetry (CV), scanning electron microscopy (SEM), and powder X‐ray diffraction (PXRD). Although the difference in compounds 1 and 2 only lie in one single bond that connects the two thienyl segments, they displayed remarkably different properties, revealing an interesting structure–property relationship.     

From Linear to T‐Shaped Indan‐1,3‐dione Push–Pull Molecules: A Comparative Study

A series of indan‐1,3‐dione‐based linear, quadrupolar and T‐shaped push–pull chromophores have been designed and synthesized by the Knoevenagel condensation and Pd‐catalyzed Suzuki–Miyaura or Sonogashira cross‐coupling reactions. The number and position of the peripheral donor branches attached to the central withdrawing indan‐1,3‐dione moiety have been varied jointly with the type of π‐linker used in order to modulate fundamental optoelectronic properties. The molecular structure of two chromophores has been confirmed by X‐ray analysis. The thermal and optoelectronic properties have further been investigated by differential scanning calorimetry, electrochemistry, UV/Vis absorption spectroscopy, and DFT calculations. Based on these experimental and theoretical data, thorough structure–property relationships have been further evaluated and influence of the particular structural modification on chromophore properties has been discussed.     

Orthogonally Self‐Assembled Multifunctional Block Copolymers

We report the synthesis of telechelic poly(norbornene) and poly(cyclooctene) homopolymers by ring‐opening metathesis polymerization (ROMP) and their subsequent functionalization and block copolymer formation based on noncovalent interactions. Whereas all the poly(norbornene)s contain either a metal complex or a hydrogen‐bonding moiety along the polymer side‐chains, together with a single hydrogen‐bonding‐based molecular recognition moiety at one terminal end of the polymer chain. These homopolymers allow for the formation of side‐chain‐functionalized AB and ABA block copolymers through self‐assembly. The orthogonal natures of all side‐ and main‐chain self‐assembly events were demonstrated by ¹H NMR spectroscopy and isothermal titration calorimetry. The resulting fully functionalized block copolymers are the first copolymers combining both side‐ and main‐chain self‐assembly, thereby providing a high degree of control over copolymer functionalization and architecture and bringing synthetic materials one step closer to the dynamic self‐assembly structures found in nature.     

Bi‐anchoring Organic Dyes that Contain Benzimidazole Branches for Dye‐Sensitized Solar Cells: Effects of π Spacer and Peripheral Donor Groups

Benzimidazole‐branched bi‐anchoring organic dyes that contained triphenylamine/phenothiazine donors, 2‐cyanoacrylic acid acceptors, and various π linkers were synthesized and examined as sensitizers for dye‐sensitized solar cells. The structure–activity relationships in these dyes were systematically investigated by using absorption spectroscopy, cyclic voltammetry, and density functional theory calculations. The wavelength of the absorption peak was more‐heavily influenced by the nature of the π linker than by the nature of the donor. For a given donor, the absorption maximum (λ_max) was red‐shifted on changing the π linker from phenyl to 2,2′‐bithiophene, whilst the dyes that contained triphenylamine units displayed higher molar extinction coefficients (?) than their analogous phenothiazine‐based triphenylamine dyes, which led to good light‐harvesting properties in the triphenylamine‐based dyes. Electrochemical data for the dyes indicated that the triphenylamine‐based dyes possessed relatively low‐lying HOMOs, which could be beneficial for suppressing back electron transfer from the conduction band of TiO₂ to the oxidized dyes, owing to facile regeneration of the oxidized dye by the electrolyte. The best performance in the DSSCs was observed for a dye that possessed a triphenylamine donor and 2,2′‐bithiophene π linkers. Electron impedance spectroscopy (EIS) studies revealed that the use of triphenylamine as the donor and phenyl or 2,2′‐bithiophene as the π linkers was beneficial for disrupting the dark current and charge‐recombination kinetics, which led to a long electron lifetime of the injected electrons in the conduction band of TiO₂.     

Synthesis of highly luminescent organoboron polymers connected by bifunctional 8‐aminoquinolate linkers

New organoboron aminoquinolate‐based polymers linked by π‐conjugated bridge were prepared by Sonogashira–Hagihara coupling of organoboron aminoquinolate‐based bisiodo monomers bearing biphenyl or bithiophene moiety with 1,4‐diethynylbenzene derivatives. Tetracoordination states of boron atoms in the obtained polymers were confirmed by ¹¹B NMR spectroscopy, and they were also characterized by ¹H NMR and IR spectroscopies and size‐exclusion chromatography. Their optical properties were studied by UV–vis absorption and photoluminescence spectroscopies. In the region above 400 nm, the polymers prepared from 1,4‐diethynyl‐2,5‐dioctyloxybenzene showed bathochromic shifts when compared with those prepared from 1.4‐diethynyl‐2‐perfluorooctyl‐5‐trifluoromethylbenzene. The polymers with biphenyl moiety showed higher absolute fluorescence quantum yields (?_F = 0.28 and 0.65), whereas those with bithiophene moiety led to decreasing of the low quantum yields (?_F = 0.19 and 0.00). The density‐functional theory (DFT) and time‐dependent–DFT calculations of model compounds corresponding to the polymers were in good agreement with the results from UV–vis properties. The calculations revealed that the electronic structure of the polymer with bithiophene moiety is different from that with biphenyl moiety, and predicted the electron transfer from the bithiophene moiety to the π‐extended quinoline moiety in transition state. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3693–3701, 2010     

Synthesis and photophysical properties of soluble low‐bandgap thienothiophene polymers with various alkyl side‐chain lengths

We report the facile synthesis and characterization of a class of thienothiophene polymers with various lengths of alkyl side chains. A series of 2‐alkylthieno[3,4‐b]thiophene monomers (Ttx) have been synthesized in a two‐step protocol in an overall yield of 28–37%. Poly(2‐alkylthieno[3,4‐b]thiophenes) (PTtx, alkyl: pentyl, hexyl, heptyl, octyl, and tridecyl) were synthesized by oxidative polymerization with FeCl₃ or via Grignard metathesis (GRIM) polymerization methods. The polymers are readily soluble in common organic solvents. The polymers synthesized by GRIM polymerization method (PTtx‐G) have narrower molecular weight distribution (?) with lower molecular weight (M_n) than those synthesized by oxidative polymerization (PTtx‐O). The band structures of the polymers with various lengths of alkyl side chains were investigated by UV–vis spectroscopy, cyclic voltammetry, and ultraviolet photoelectron spectroscopy. These low‐bandgap polymers are good candidates for organic transistors, organic light‐emitting diodes, and organic photovoltaic cells. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,Properties, and Remarkable 2 D Self‐Assembly at the Liquid/Solid Interface of a Series of Triskele‐Shaped 5,11,17‐Triazatrinaphthylenes (TrisK)

A series of 5,11,17‐triazatrinaphthylene (TrisK) derivatives, large disk‐like π‐conjugated molecules with C_3h symmetry, has been synthesised by following an optimised synthetic pathway. The synthesis was performed by a four‐step protocol based on the N‐arylation of 1,3,5‐tribromobenzene with appropriate anthranilate derivatives. This strategy permits the generation of either chlorinated ( TrisK‐Cl‐OCn ) or non‐chlorinated ( TrisK‐H‐OCn ) alkoxy‐substituted derivatives (OC_nH_2n+1 with n=3, 10, 12 and 16), thus providing additional versatility in the control of the structure–property relationships. The electronic properties of the various TrisK compounds have been characterised in solution by absorption and emission spectroscopies as well as cyclic voltammetry. The crystal structure of 2,8,14‐propyloxy‐5,11,17‐triazatrinaphthylene TrisK‐H‐OC3 has been determined by X‐ray diffraction analysis, which revealed the presence of stabilising weak intermolecular H bonds. Scanning tunnelling microscopy (STM) at the liquid/solid interface has revealed the remarkable 2D self‐assembling properties of the TrisK compounds. In particular, it has shown that TrisK‐H‐OC12 forms three concomitant self‐organised 2D phases with different row‐packing arrangements. This 2D polymorphism arises from slow ordering due to the presence of three long dodecyloxy chains on the molecular backbone. Individual molecules can be imaged with spectacular intramolecular resolution, thus providing the possibility of correlating the STM features with the calculated charge density distribution.     

Self‐Assembly of Photochromic Diarylethenes with Amphiphilic Side Chains: Core‐Chain Ratio Dependence on Supramolecular Structures

Photochromic diarylethene derivatives having different lengths and numbers of poly(ethylene glycol) side chains were synthesized and their photochromic property and self‐assembling behavior were investigated. The self‐assembling behavior of the derivatives strongly depends upon the ratio between the hydrophobic core and the amphiphilic side chain. According to UV/Vis absorption spectroscopy, CD spectroscopy, and dynamic light scattering experiments, these derivatives showed different size distribution of the assembled structures and different solubility in water. The intensity of the induced CD signal, which was observed in the closed‐ring isomer, was the largest for the molecule having two hexaethylene glycol side chains. The relationship between the core‐chain ratio and regularity of the self‐assembled structure has been investigated.     

Self‐Directed Orientation of Molecular Columns Based on n‐Type Hexaazatrinaphthylenes (HATNAs) for Electron Transport

Self‐organizing n‐type hexaazatrinaphthylenes (HATNAs) with various bay‐located side chains have been synthesized. The HATNA derivatives are able to form long‐range molecular columns with self‐directed growth directions. In particular, alkyl‐substituted HATNAs showed in‐plane molecular columns with axes parallel to substrates, whereas the columnar orientation of the HATNAs with alkylethynyl or alkylthio groups strongly depended on the length of the introduced side chains. Interestingly, the derivative with octylthio chains exhibited out‐of‐plane molecular columns, in which electron mobility of up to 10^?3 cm² V^?1 s^?1 was determined through the time‐of‐flight technique, highlighting the fact that such molecular columns based on bay‐substituted HATNAs are promising n‐type semiconductors for device applications.     

Conjugated Oligomers and Polymers Sheathed with Designer Side Chains

Conjugated polymers (CPs) are often referred to as molecular wires because of their quasi one‐dimensional electronic wavefunctions delocalized along the polymer chains. However, in the solid state, CPs tend to self‐assemble through π‐stacking, which greatly attenuates the one‐dimensional nature. By molecular design, CPs can be molecularly insulated just like electric power cords, resulting in so‐called “insulated” molecular wires (IMWs). In this Focus Review, we will discuss their unique photophysical, electronic, and mechanical properties which originate from the absence of π‐stacking.     

Energy transfer in poly(3‐hexylthiophene)‐g‐Polyfluorene graft copolymers

Conjugated graft copolymers consisting of a poly(3‐hexylthiophene) (P3HT) backbone and poly(9,9'‐dioctylfluorene) side chains (PF) with different grafting degrees were synthesized by the CuAAC reaction. The properties of these materials were studied by UV‐Vis and fluorescence spectroscopy. The former technique provides insight in their self‐assembly, while the latter is used to study the energy funneling from the PF side chains to the P3HT backbone. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1252–1258     

Photoconductive Core–Shell Liquid‐Crystals of a Perylene Bisimide J‐Aggregate Donor–Acceptor Dyad

A novel core–shell structured columnar liquid crystal composed of a donor‐acceptor dyad of tetraphenoxy perylene bisimide (PBI), decorated with four bithiophene units on the periphery, was synthesized. This molecule self‐assembles in solution into helical J‐aggregates guided by π–π interactions and hydrogen bonds which organize into a liquid‐crystalline (LC) columnar hexagonal domain in the solid state. Donor and acceptor moieties exhibit contrasting exciton coupling behavior with the PBIs’ (J‐type) transition dipole moment parallel and the bithiophene side arms’ (H‐type) perpendicular to the columnar axis. The dyad shows efficient energy and electron transfer in solution as well as in the solid state. The synergy of photoinduced electron transfer (PET) and charge transport along the narcissistically self‐assembled core–shell structure enables the implementation of the dye in two‐contact photoconductivity devices giving rise to a 20‐fold increased photoresponse compared to a reference dye without bithiophene donor moieties.     

Use of Side‐Chain Incompatibility for Tailoring Long‐Range p/n Heterojunctions: Photoconductive Nanofibers Formed by Self‐Assembly of an Amphiphilic Donor–Acceptor Dyad Consisting of Oligothiophene and Perylenediimide

To tailor organic p/n heterojunctions with molecular‐level precision, a rational design strategy using side‐chain incompatibility of a covalently connected donor–acceptor (D–A) dyad has been successfully carried out. An oligothiophene–perylenediimide dyad, when modified with triethylene glycol side chains at one terminus and dodecyl side chains at the other ( 2 Amphi ), self‐assembles into nanofibers with a long‐range D/A heterojunction. In contrast, when the dyad is modified with dodecyl side chains at both termini ( 2 Lipo ), ill‐defined microfibers result. In steady‐state measurements using microgap electrodes, a cast film of the nanofiber of 2 Amphi displays far better photoconducting properties than that of the microfiber of 2 Lipo . Flash‐photolysis time‐resolved microwave conductivity measurements, in conjunction with transient absorption spectroscopy, clearly indicate that the nanofiber of 2 Amphi intrinsically allows for better carrier generation and transport properties than the microfibrous assembly of 2 Lipo .     

Rational Design and Identification of a Non‐Peptidic Aggregation Inhibitor of Amyloid‐β Based on a Pharmacophore Motif Obtained from cyclo[‐Lys‐Leu‐Val‐Phe‐Phe‐]

Inhibition of pathogenic protein aggregation may be an important and straightforward therapeutic strategy for curing amyloid diseases. Small‐molecule aggregation inhibitors of Alzheimer’s amyloid‐β (Aβ) are extremely scarce, however, and are mainly restricted to dye‐ and polyphenol‐type compounds that lack drug‐likeness. Based on the structure‐activity relationship of cyclic Aβ16–20 (cyclo‐[KLVFF]), we identified unique pharmacophore motifs comprising side‐chains of Leu², Val³, Phe⁴, and Phe⁵ residues without involvement of the backbone amide bonds to inhibit Aβ aggregation. This finding allowed us to design non‐peptidic, small‐molecule aggregation inhibitors that possess potent activity. These molecules are the first successful non‐peptidic, small‐molecule aggregation inhibitors of amyloids based on rational molecular design.     

Synthesis and Photovoltaic Properties of Two‐Dimensional Low‐Bandgap Copolymers Based on New Benzothiadiazole Derivatives with Different Conjugated Arylvinylene Side Chains

A new series of 2,1,3‐benzothiadiazole (BT) acceptors with different conjugated aryl‐vinylene side chains have been designed and used to build efficient low‐bandgap (LBG) photovoltaic copolymers. Based on benzo[1,2‐b:3,4‐b′]dithiophene and the resulting new BT derivatives, three two‐dimensional (2D)‐like donor (D)–acceptor (A) conjugated copolymers have been synthesised by Stille coupling polymerisation. These copolymers were characterised by NMR spectroscopy, gel‐permeation chromatography, thermogravimetric analysis and differential scanning calorimetry. UV/Vis absorption and cyclic voltammetry measurements indicated that their optical and electrochemical properties can be facilely modified by changing the structures of the conjugated aryl‐vinylene side chains. The copolymer with phenyl‐vinylene side chains exhibited the best light harvesting and smallest bandgap of the three copolymers. The basic electronic structures of D–A model compounds of these copolymers were also studied by DFT calculations at the B3LYP/6‐31G* level of theory. Polymer solar cells (PSCs) with a typical structure of indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene) (PEDOT):poly(styrenesulfonate) (PSS)/copolymer:[6,6]‐phenyl‐C₆₁(C₇₁)‐butyric acid‐methyl ester (PCBM)/calcium (Ca)/aluminum (Al) were fabricated and measured under the illumination of AM1.5G at 100 mW cm^?2. The results showed that the device based on the copolymer with phenyl‐vinylene side chains had the highest efficiency of 2.17 % with PC₇₁BM as acceptor. The results presented herein indicate that all the prepared copolymers are promising candidates for roll‐to‐roll manufacturing of efficient PSCs. Suitable electronic, optical and photovoltaic properties of BT‐based copolymers can also be achieved by fine‐tuning the structures of the aryl‐vinylene side chains for photovoltaic application.     

Phosphate‐Triggered Self‐Assembly of N‐[(Uracil‐5‐yl)methyl]urea: A Minimalistic Urea‐Derived Hydrogelator

N‐[(Uracil‐5‐yl)methyl]urea is reported as a minimalistic low‐molecular‐weight hydrogelator (LMWHG). The unusual phosphate‐induced assembly of this compound has been thoroughly investigated by IR, UV/Vis, and NMR spectroscopy, electron microscopy, and rheological experiments. This rare example of an anion‐triggered urea‐based LMWHG is the first example of a pyrimidine‐ and urea‐containing molecule that can be forced into self‐assembly in aqueous solution without additional aromatic or lipophilic groups. The gelator/phosphate ratio within the hydrogel was successfully determined by ³¹P MAS NMR spectroscopy. The hydrogel exhibits a very fast and repeatable self‐healing property, and remarkable G′ values. The viscoelastic properties of the hydrogel can easily be tuned by variation of the phosphate ratio.     

ortho‐Phenylene‐Bridged Cyclic Oligopyrroles: Conformational Flexibilities and Optical Properties

ortho‐Phenylene‐bridged cyclic trimeric oligopyrrole C3 and hexameric oligopyrrole C6 were synthesized by Suzuki–Miyaura coupling reactions. The twisted structures of C3 and C6 were unambiguously revealed by X‐ray diffraction analysis. The optical properties of these cyclic oligopyrroles were compared with linear oligopyrrole L3 and cyclic tetramer C4 . The cyclic oligopyrroles exhibited large Stokes shifts and blue fluorescence with high quantum yields in solution and in the solid state. In addition, selective N‐methylation and N‐tolylation of C3 were used to tune the optical and electrochemical properties by changing the molecular twists and conformational flexibilities. Throughout these studies, the structure–property relationship of these cyclic strained oligopyrroles has been illustrated as an interesting molecular motif for novel cyclic π‐conjugated systems.     

Optically Active Polysilylenes: State‐of‐the‐Art Chiroptical Polymers

Controlled synthesis, chiroptical characterization, and manipulation of artificial helical polymers are challenging issues in modern polymer stereochemistry. Although many artificial polymers adopting a preferential screw‐sense helical structure have been investigated, optically active polysilylenes bearing chiral side chains may be among the most suitable to elucidate the inherent nature of the helical structure, since these polymers offer powerful spectroscopic probes as a result of their ideal chromophoric and fluorophoric main chain properties around 300–330 nm. The present paper will review comprehensively the helix‐property‐functionality relationship between side chain structure, global and local main chain conformation, (chir)optical properties, electronic properties, several helical cooperative phenomena, the effects of temperature and solvent polarity, and molecular imaging. This knowledge and understanding of the nature of the polysilylene helix might constitute a bridge between artificial polymers and biopolymers and will assist in designing and controlling new types of helical polymers directed to diverse screw‐sense‐related properties and applications in the future.