聚乙二醇型聚氨酯软硬段对其相变储热性能的影响

以不同分子量的聚乙二醇(PEG)为软段,MDI-BDO为硬段,采用两步法溶液聚合合成一种具有固-固相变储热性能的聚氨酯材料.通过DSC,WAXD等测试手段对体系的软硬段结晶性,微相分离,相变可逆性及循环热稳定性进行研究,结果表明,聚氨酯中硬段的存在对软段结晶有着很大的影响,当软段分子量达到2000或以上时,软段才具有较大的结晶度和熔融相变焓,且硬段含量必须高于一定值才能形成较为完善的物理交联网络以保证材料在发生相变时维持固体状态.同时符合这两个条件的试样能具有较好的固-固相变储热性能.就软段PEG含量及分子量对材料储热性能的影响进行了研究,通过调节软段含量与分子量得到一系列具有不同相变焓和相变温度的聚氨酯固-固相变储热材料.经测试还发现,该材料具备很好的相变可逆性和循环热稳定性,是一类很有开发前景的相变储热材料.     

接枝共聚法制备聚乙二醇(PEG)/聚乙烯醇(PVA)高分子固-固相变材料性能研究

用接枝共聚法将具有相变特征的聚乙二醇(PEG)接枝到具有较高熔点的聚乙烯醇(PVA)主链上,得到了系列性能稳定的PEG/PVA高分子固-固相转变材料,用DSC,WAXD和POM对其相变行为及形态结构进行了研究.结果表明,该材料呈现出可逆的固-固相转变特性;其结晶峰值温度和相变焓比纯PEG低,接枝率对相变温度和归一化相变焓影响不大;接枝率只影响结晶与熔融行为,不影响结晶结构.     

PEG-沸石固-固相变材料的制备及性能

摘要：采用接枝共聚法合成了以聚乙二醇（PEG）为相变物质,沸石为骨架的PEG沸石固-固相变材料。通过红外光谱（FT—IR）、热失重分析（TGA）和差示扫描量热法（DSC）等测试手段对PEG-沸石固-固相变材料的结构、相变行为及热稳定性进行了研究。结果表明：通过改变PEG的分子量,可以得到不同相变焓和不同相变温度的PEG-沸石固-固相变材料,其相变焓可达105．41J／g,热稳定性良好,起始分解温度高于300℃。     

六羟基化合物为骨架的高分子固-固相变材料的合成与性能

分别使用三种含6个羟基的化合物(山梨醇、双季戊四醇和肌醇)作为分子骨架,聚乙二醇(PEG)作为相变功能链,4,4'-二苯基甲烷二异氰酸酯(MDI)为交联剂,合成了3种具有不同交联结构的新型固-固相变储能材料。通过傅里叶变换红外光谱(FT IR)、X-射线衍射(XRD)、偏光显微镜(POM)、示差扫描量热法(DSC)和热重量分析法(TG)分别对合成材料的分子结构、结晶性能、相变行为和热稳定性进行了研究。结果显示,所制备的材料在30~70℃温度范围内具有典型的固-固相变特性,其升温和冷却过程的相变焓最高可达107.5J/g和102.9J/g。此外,通过热重分析发现所合成材料具有较好的可重复使用性和热稳定性。因此,合成的新型固-固相变材料在热能储存和控温领域具有巨大的应用潜力。     

纤维素基储能调温超细纤维的制备

使用静电纺丝法制备了以醋酸纤维素(CA)为载体基质,聚乙二醇(PEG)为相变材料的新型PEG/CA储能调温超细复合纤维,研究了纺丝溶液中不同PEG含量和分子量对复合纤维的形态和热学性能的影响。结果发现复合纤维的形态一般呈表面光滑的圆柱状,其平均直径随着PEG含量和分子量的增加而增大,PEG随机分布在复合纤维中的内部和表面。热学分析发现当改变纤维中PEG的含量时,复合纤维的相变温度变化不大,而相变焓则与之成正比变化;当改变纤维中PEG分子量时,复合纤维的相变温度和相变焓均随之而改变。通过多次热循环测试发现复合纤维的热学性能均无太大变化,表明所得复合纤维具有良好的耐热性能和稳定性能。通过模拟测试发现,所制得的PEG/CA复合纤维具有良好的蓄热调温特性。因此,PEG/CA储能调温超细复合纤维具有很好的应用前景。     

催化剂用量对醋酸纤维素接枝聚乙二醇单甲醚相变材料接枝率和性能的影响

以二月桂酸二丁基锡(DBTDL)作为催化剂,以醋酸纤维素(CDA)为基体材料、以聚乙二醇单甲醚(MPEG)为工作物质,利用溶液聚合法合成了纤维素接枝聚乙二醇单甲醚相变材料,研究了催化剂用量对MPEG接枝产物接枝率和性能的影响.结果表明,当催化剂用量为0.15%(质量分数,下同)时,MPEG1000和MPEG1500接枝产物的接枝率均达到最大值,分别为224.03%和189.30%;当催化剂用量为0.1%时,MPEG2000接枝产物的接枝率最大,达129.99%.此外,由不同分子量MPEG制备的接枝产物的相变温度和相变焓不同,不同产物在升温过程中均呈现较好的固-固相变调温性能.     

水性聚氨酯相变储能材料的相变机理

以聚乙二醇(PEG)为软段、六亚甲基二异氰酸酯-1,4-丁二醇-二羟甲基丙酸(HDI-BDO-DMPA)为硬段,制备了一系列水性聚氨酯相变储能材料(WPUPCM)。在相变过程中,由于软段PEG由聚合前的固-液相变转化为聚合后的固-固相变,因此,所制备的WPUPCM表现出固-固相变特性。为了研究其固态相变行为的本质和形成机理,揭示该类聚合物的能量贮存和转换机理,应用偏光显微镜、扫描电镜、原子力显微镜、X射线衍射仪分析研究了PEG、WPUPCM在相变过程中的晶体结构变化特征,讨论了WPUPCM固-固相转变的机理。     

固相反应法制备微/纳米复合相变储能材料及其测试表征

采用低热固相化学反应法制备了表面包覆SiO2的不同硬脂酸含量的复合相变储能微纳米材料.XRD分析表明所制备的相变材料均呈晶相结构,红外图谱显示复合材料包覆层SiO2与相变主体材料硬脂酸C18H36O2(SA)存在键合作用,扫描电镜图片说明所合成复合材料呈较均匀颗粒状,而差热分析则表明所制得复合相变材料的相变温度分别为66.4、64.9 ℃,相变焓分别为148.97、111.54 J/g,具有良好的蓄热能力,可用于太阳能利用等方面的储能蓄热.     

纤维素丙酸酯-g-二乙二醇正十六烷基醚固-固相变材料的制备及性能

以二月桂酸二丁基锡(DBTDL)为催化剂,微晶纤维素为骨架材料,二乙二醇正十六烷基醚(E2C16)为相变材料,采用化学接枝法制备了系列纤维素丙酸酯-g-二乙二醇正十六烷基醚(CP-g-E2C16)固-固相变材料.利用傅里叶变换红外光谱(FTIR)、核磁共振氢谱(1H NMR)、差示扫描量热仪(DSC)、热重分析(TG)和X射线衍射(XRD)对CP-g-E2C16相变材料的结构和热性能进行了表征.结果表明,得到了E2C16的取代度和接枝含量分别为0.12~0.37和17.1%~33.4%的CP-g-E2C16固-固相变材料.CP-g-E2C16接枝共聚物的相变温度和相变焓分别为25~34℃和40~62 J/g,符合人的体感舒适温度范围.CP-g-E2C16固-固相变材料的耐热温度高于237℃,与E2C16相比提高21~40℃,有望应用于熔融纺丝法制备纤维素基储热调温纤维领域.     

以可控孔径玻璃为基质的疏水作用固定相的研制

以不同分子量的聚乙二醇(PEG 400,600,800,1000和2000)为配基,发展了一类以可控孔径玻璃(CPG)为基质的疏水作用色谱固定相,研究了其分离生物高分子的色谱条件,这类固定相可以以很高的活性回收率使蛋白质得到满意的分离。     

Synthesis and Characterization of Storage Energy Materials Prepared from Nano-crystalline Cellulose/Polyethylene Glycol

The development and the application of phase change materials (PCMs) as a new kind of materials have attracted both scientific and industrial interest1-4. According to the patterns of phase conversion, commonly PCMs are divided into solid-liquid phase cha…     

Homogeneous-to-Heterogeneous-Strategy Enables Multifunctional Phase-Change Materials for Energy Storage

Functional phase-change materials (PCMs) are conspicuously absent in various organic or inorganic solids with diversified applications in which the attributes of these molecular materials have been highly realized. Leakage problem during the phase transition process is the main obstacle on the way of widely use of solid-liquid PCMs who has been recognized to be promisingly practical candidates for energy storage owing to the high energy storage density and small volume change in the phase transition process. Herein, a novel homogeneous-to-heterogeneous-strategy, in which all the starting materials involved display a homogeneous state and the encapsulation framework formed in situ in the encapsulation process, enabled by an aerogel reaction of silica was realized under the catalysis of an organic base. Besides the comprehensive study upon energy storage performance, light-to-thermal conversion and recyclability performance study of the obtained materials reveal the clear superiority over pristine paraffin wax (PW) thanks to the versatility and robustness of this fabrication method. More importantly, the homogeneous-to-heterogeneous-strategy endows a unique adsorption ability with respect to organic pollutant due to the PCMs inside and therefore bearing a great potential to be used in environment protection fields.     

Microencapsulation of PCMs with a polystyrene shell

Microencapsulation of different phase change materials (PCMs) with a polymer shell of polystyrene by suspension polymerization has been carried out. This method based on a suspension polymerization allows the encapsulation of non-polar PCMs, while that it was not possible to encapsulate the polar PCMs (polyglycols). This study deals with preparation and characterization of encapsulated paraffin wax. Thermal properties, the morphology and the particle size distribution of the microcapsules obtained were determined by differential scanning calorimetry, scanning electron microscopy and laser diffraction, respectively. This encapsulated paraffin wax could be considered to have good potential for energy storage.     

相变储能材料的研究进展

综述了相变材料的研究进展状况 ,介绍了相变材料的分类以及各类相变材料的性能、储能机理和优缺点 ,并介绍了一些新型的相变材料 ,指出了该领域中有待解决的问题 ,展望了未来相变材料的发展前景。     

Improvement of thermal inertia of styrene–ethylene/butylene–styrene (SEBS) polymers by addition of microencapsulated phase change materials (PCMs)

In this work, microencapsulated phase change materials (PCMs) with a melting temperature of 52 °C have been used to improve thermal inertia phenomena on an elastomeric matrix of styrene–ethylene/butylene–styrene (SEBS) material. The amount of PCMs has varied in the 1–10 wt.% and these materials have been processed by conventional injection molding without PCM degradation. Mechanical characterization of SEBS–PCM compounds has been carried out and the obtained results show good maintenance of both resistant and ductile properties for PCM amounts comprised in the 1–5 wt.% range. Scanning electron microscopy (SEM) analysis has revealed good wetting properties of PCM microcapsules with the SEBS matrix which is a key factor to obtain good mechanical performance. The effect of PCM addition on thermal inertia has been evaluated by active infrared thermography (IRT), showing a remarkable effect on thermal regulation of SEBS in the temperature range close to the melting point of the PCM (52 °C). This thermoregulation effect is more accurate as the PCM content increases. Also, cooling curves have been constructed in order to quantify the thermal inertia effect in a cooling process.     

Form-stable electrospun nanofibrous mats as a potential phase change material

A series of Poly vinyl butyral–Poly (acrylic acid) (PVB-PAA) based form-stable phase change materials (PCMs) have been prepared for the use of thermal energy storage applications. Six types of formulations containing five different fatty alcohols were prepared by adding PVB to PAA. Using electrospinning to fabricate nanofibrous mats, our aim was to investigate their properties as form-stable PCMs. Fatty alcohols, 1-Tetradecanol, 1-Hexadecanol, 1-Octadecanol, 1-Eicosanol and 1-Docosanol, were added separately to base formulation. The structural characterization tests were performed by ATR-FTIR spectroscopy. Morphological tests were conducted using Scanning Electron Microscope (SEM). Thermal performances and phase change behaviors were tested by thermogravimetric analysis system (TGA) and differential scanning calorimetry (DSC). The heating cycle phase change enthalpy is measured between 223 and 241?J/g, and the freezing cycle phase change enthalpy is found between 215 and 239?J/g. The main decomposition PVB-PAA based PCMs started at 220?°C. This study suggested that PVB-PAA based PCMs possess well phase change properties and they were found to have an applicable temperature range. With the presented results these materials promise a great potential in thermal energy storage applications.     

Extensively Reversible Thermal Transformations of a Bistable,Fluorescence‐Switchable Molecular Solid: Entry into Functional Molecular Phase‐Change Materials

Functional phase‐change materials (PCMs) are conspicuously absent among molecular materials in which the various attributes of inorganic solids have been realized. While organic PCMs are primarily limited to thermal storage systems, the amorphous–crystalline transformation of materials like Ge‐Sb‐Te find use in advanced applications such as information storage. Reversible amorphous–crystalline transformations in molecular solids require a subtle balance between robust supramolecular assembly and flexible structural elements. We report novel diaminodicyanoquinodimethanes that achieve this transformation by interlinked helical assemblies coupled with conformationally flexible alkoxyalkyl chains. They exhibit highly reversible thermal transformations between bistable (crystalline/amorphous) forms, along with a prominent switching of the fluorescence emission energy and intensity.     

高结构稳定性、低泄漏率三维铜@石墨烯复合相变材料的制备

由于能源消费需求的持续增长和传统化学燃料的日益枯竭,对可再生能源的需求日益迫切。以地热能、太阳能为代表的可再生能源脱颖而出。然而,这些能源的应用易受到天气、季节、地点和时间的影响,具有不稳定性、随机性、波动性和间歇性。储能技术是解决上述问题的有效途径,它可以在需要的时候储存或释放能量。在各种储能技术可选材料中,相变材料(PCMs)是智能热能管理和便携式热能领域的有力候选者。大多数相变材料都存在导热系数低、环境污染、熔点泄漏等问题,因此有必要将相变材料封装到支撑骨架材料中。事实上,支撑材料在应用中仍面临着一些重大挑战。首先,骨架材料应能抵抗相变材料在相变过程中的体积变化,即具有良好的结构稳定性。其次,还应具有较高的导热系数和较低的泄漏率。石墨烯气凝胶(GA)已被证明是提高相变材料形状稳定性的有效支撑骨架,但相变引起的泄漏和网络结构的脆性是制约其应用的关键问题。在此,我们提出了一种双脉冲电镀的强化策略,用于制备铜@石墨烯气凝胶(Cu@GA)作为相变储能骨架材料。这一结构设计中,石墨烯气凝胶上的石墨烯片层上均匀地镀上了铜层,且不同片之间被铜镀层所连接。这种铜增强石墨烯气凝胶网络结构赋予复合材料良好的导热性和坚固的骨架稳定性,有利于增强相变换热和抑制相变过程中的泄漏。此外,通过真空浸渍法将十八胺(ODA)封装在Cu@GA骨架中,获得了结构稳定性高、泄漏率低的复合相变材料(Cu@GA/ODA),保证了ODA在Cu@GA骨架材料中的均匀分散和填充。通过比较复合相变材料的重量变化,研究了不同骨架对复合相变材料泄漏率的影响。优化后的复合相变材料(CPCM)Cu@GA/ODA经20次储热、放热循环后,泄漏率降低至19.82% (w,质量分数),而GA/ODA和GOA/ODA为骨架的复合相变材料的泄漏率分别为80.31% (w)和72.99% (w)。为了探讨这种影响的原因,用扫描电子显微镜(SEM)观察了循环后骨架的形貌。铜/石墨烯气凝胶(Cu@GA)骨架材料没有明显的收缩或坍塌,仍可以保持完整的三维网络结构,而氧化石墨烯气凝胶(GOA)和石墨烯气凝胶(GA)的骨架材料三维结构不复存在,且在氧化石墨烯/石墨烯片能够观察到明显的裂隙。铜涂层可以提高骨架的微观结构稳定性,有利于提高结构稳定性,降低复合材料的泄漏率。同时,该研究为构建理想的金属增强石墨烯气凝胶复合骨架材料铺平了新的道路,该复合材料具有优异的综合性能,可用于未来的相变储能、多孔微波吸收和储能应用。