The influence of noncovalent interactions in metal‐free organic dye molecules to augment the efficiency of dye sensitized solar cells: A computational study

The efficiency of dye sensitized solar cells (DSSCs) can be enhanced with achieving better planarity of metal‐free organic dye molecules and thinning of their aggregation on the semiconductor surface. We report that the subtle noncovalent N^…S interaction between the substituted phosphazene group and thiophene spacer unit in dye molecule which induces the desired planarity and avoid aggregation of such molecules on the TiO₂ surface using DFT calculations. DFT results show that phosphazene group increases the maximum absorption wavelength (λ_max), driving force for electrons injection (ΔG_injection), singlet excited state lifetime (τ), dipole moments (μ_normal), and number of electrons transferred from dye to TiO₂ surface (Δq), which are known to augment the efficiency of DSSCs. Further, the lower ΔG_regeneration value of phosphazene containing dyes (e.g., –.37 eV, dye 2 ) than the reported dyes (e.g., –.81 eV, dye 1 ) indicate the faster electron injection rate from the former dye to the semiconductor TiO₂. The role of phosphazene group to prevent the aggregation of dye molecules on the TiO₂ anatase surface was also examined with GGA‐PBE/DNP level of theory. The calculated results suggest that the dye molecules on 1 ‐(TiO₂)₃₈ and 2 ‐(TiO₂)₃₈ anatase clusters avoids the aggregation due to the steric congestion induced by phosphazene group. This work reports to accomplish dual properties with subtle noncovalent interactions in dye molecules to augment the efficiency in DSSCs.     

Thiocyanate‐free ruthenium(II) tetrabenzoporphyrin sensitizers for photoelectrochemical cell: A DFT/TD‐DFT probe for stability of axial donor ligands

Although previously studied [(HOOC)₄(TBPor)Ru(NCS)₂]^2– ( A ; TBPor = tetrabenzoporphrin) avoided the intrinsic π‐stacking aggregation of planar metallophorphryins via incorporating two axial ligands, these isothiocyanato groups are believed to be the weakest part of the sensitizer while operating in dye‐sensitized solar cells (DSSCs). In this work, a series of thiocyanate‐free ruthenium porphyrin complexes featuring with phenyl/substituted‐phenyl axial groups, [(HOOC)₄(TBPor)Ru(L′)₂]^2– (L′ = Ph ( 1 ), PhF₂ ( 2 ), PhCl₂ ( 3 ), PhBr₂ ( 4 ), and PhI₂ ( 5 )), have been examined using density functional theory (DFT) and time‐dependent DFT (TD‐DFT). Both analyses of electronic structures and calculations of interaction energies demonstrate that the Ru‐L′ interaction in 1 – 5 is significantly enhanced relative to the Ru‐NCS in A , which will raise chemical stability of the former in DSSCs. Single‐electron oxidation mechanism has been proposed. Oxidation potentials (E⁰) are increased by 0.2–0.6 V when changing axial groups from NCS to Ph/PhX₂. The spin‐orbit coupling (SOC) relativistic effects can be negligible in computing E⁰ values. TD‐DFT calculations show that 1 – 5 have more intense Q band in the visible region than A does. Taken together, high chemical stability, suitable oxidation potential and expanding absorption spectra would allow for potential applications of the thiocyanate‐free sensitizers in DSSCs. © 2016 Wiley Periodicals, Inc.     

Iodinated AlIII‐Based Phthalocyanines are Promising Sensitizers for Dye‐Sensitized Solar Cells; A Theoretical Comparison Between ZnII,MgII, and AlIII‐Based Phthalocyanine Sensitizers

To design efficient dyes for dye‐sensitized solar cells (DSSCs), using a Zn‐coordinated phthalocyanine (TT7) as the prototype, a series of phthalocyanine dyes (Pcs) with different metal ions and peripheral/axial groups have been investigated by means of density functional theory (DFT) and time‐dependent DFT (TDDFT) methods. Computational results show that the iodinated Al‐based dye with a peripheral amino group (Al‐I‐NH₂‐Pc) exhibits the largest redshift in the maximum absorbance (λ_max). In addition, Al‐based dyes have appropriate energy‐level arrangements of frontier orbitals to keep excellent balance between electron injection and regeneration of oxidized dyes. Further, it has been found that the intermolecular π‐staking interaction in Al‐I‐Pc molecules is weaker than the other metal‐based Pcs, which may effectively reduce dye aggregation on the semi‐conductor surface. All these results suggest iodinated Al‐based Pcs (Al‐I‐Pcs) to be potentially promising sensitizers in DSSCs.     

Theoretical studies on triaryamine‐based p‐type D‐D‐π‐A sensitizer

Development of triaryamine‐based nonmetallic dye sensitizers is a hot topic in the solar cell research. A series of triaryamine‐based dyes WS1 – WS7 were designed with W1 as the prototype. Density functional theory (DFT) and time‐dependent‐DFT calculations were used to investigate the effects of the attached donor D on the absorption spectra and electronic properties of the dyes. The light‐harvesting efficiency (LHE), hole injection force (ΔG_inj), dye regeneration force (ΔG_reg), and charge recombination force (ΔG_CR) for all the dyes were predicted. The insertion of D not only results in a red shift in the absorption spectra for all dyes but also achieves a broader absorption for visible light. Compared with that of the prototype, the absorption peak of the dye WS7 has a red shift of 95 nm and an oscillator strength increase of 29%. The absorption peak of WS7 is wider and stronger, and the absorption range extends to 900 nm. The LHE and ΔG_reg values of WS7 are 0.991 and ?1.49 eV, respectively. On overall evaluation, WS7 is a promising candidate of a p‐type dye sensitizer with good light absorption and dye regeneration efficiency.     

Effects of Core‐modification on Porphyrin Sensitizers to the Efficiencies of Dye‐sensitized Solar Cells

To study dye‐sensitized solar cells (DSSCs) with core‐modified porphyrins as the sensitizing dyes, three porphyrins with an ethynyl benzoic acid as an anchoring group are prepared. The properties of free‐base regular porphyrin (N4), thiaporphyrin (N3S) and oxaporphyrin (N3O) were thoroughly studied by spectroscopic methods, DFT calculations, and photovoltaic measurements. Replacing one of the porphyrinic core nitrogen atoms by oxygen or sulfur considerably changes the absorption spectra. The Soret band of the N3O and N3S observed bathochromic shifts of 3‐9 nm while the Q band reaches 700 nm to the near‐infrared region. The overall conversion efficiencies of the DSSCs based on these porphyrins are in the order N4 (3.66%) ? N3S (0.22%) > N3O (0.01%). The time‐correlated single photon counting observed short fluorescence lifetimes for N3O adsorbed both on TiO₂ and Al₂O₃ which explicates the poor efficiency of DSSC using N3O as the photosensitizer.     

Dipolar Compounds Containing Fluorene and a Heteroaromatic Ring as the Conjugating Bridge for High‐Performance Dye‐Sensitized Solar Cells

A novel series of dipolar organic dyes containing diarylamine as the electron donor, 2‐cyanoacrylic acid as the electron acceptor, and fluorene and a heteroaromatic ring as the conjugating bridge have been developed and characterized. These metal‐free dyes exhibited very high molar extinction coefficients in the electronic absorption spectra and have been successfully fabricated as efficient nanocrystalline TiO₂ dye‐sensitized solar cells (DSSCs). The solar‐energy‐to‐electricity conversion efficiencies of DSSCs ranged from 4.92 to 6.88 %, which reached 68–96 % of a standard device of N719 fabricated and measured under the same conditions. With a TiO₂ film thickness of 6 μm, DSSCs based on these dyes had photocurrents surpassing that of the N719‐based device. DFT computation results on these dyes also provide detailed structural information in connection with their high cell performance.     

Novel Thiazolo[5,4‐d]thiazole‐Based Organic Dyes for Quasi‐Solid‐State Dye‐Sensitized Solar Cells

A series of novel metal‐free organic dyes containing the thiazolo[5,4‐d]thiazole moiety were designed and synthesized for quasi‐solid‐state dye‐sensitized solar cells (DSSCs). Different alkoxy chains were introduced into the electron donor part of the dye molecules for comparison. The optical, electrochemical, and photovoltaic properties for all sensitizers were systematically investigated. It was found that the sensitizers with the different alkoxy groups have similar photophysical and electrochemical properties, such as absorbance and energy levels, owing to their close chemical structures. However, the quasi‐solid‐state DSSCs based on the resulting sensitizers exhibit different performance parameters. The quasi‐solid‐state DSSC based on sensitizer FNE74 with two octyloxy chains possessed the highest solar energy conversion efficiency of 5.10 % under standard AM 1.5G sunlight illumination without the use of coadsorbant agents.     

Tris‐Heteroleptic Ruthenium–Dipyrrinate Chromophores in a Dye‐Sensitized Solar Cell

Two novel tris‐heteroleptic Ru–dipyrrinates were prepared and tested as sensitizers in the dye‐sensitized solar cell (DSSC). Under AM 1.5 sunlight, DSSCs employing these dyes achieved power conversion efficiencies (PCEs) of 3.4 and 2.2 %, substantially exceeding the value achieved previously with a bis‐heteroleptic dye (0.75 %). As shown by electrochemical measurements and DFT calculations, the improved PCEs stem from the synthetically tuned electronic structure, which affords more negative excited state redox potentials and favorable electron injection into the TiO₂ conduction band. Electron injection was quantified by nanosecond transient absorption spectroscopy, which revealed that the highest injection yield is achieved with the dye that acts as the strongest photoreductant.     

Promising sensitizers for dye sensitized solar cells: A comparison of Ru(II) with other earth's scarce and abundant metal polypyridine complexes

There has recently been a growing interest in dye sensitized solar cells (DSSCs) based on ruthenium metal, but due to the scarcity and high price of ruthenium, design of better and cheaper light adsorbent dyes based on more abundant metal ions is one of the key issues for future development of the DSSCs. Using density functional theory (DFT) and time-dependent DFT we have studied the properties of new and abundant metal ion-based polypyridyl dyes for p-type DSSCs and compared with ruthenium and other scarce metal ions. Molecular geometries, electronic structures, and optical absorption spectra have been calculated using an implicit solvent corresponding to acetonitrile. The calculated fair light harvesting efficiency, high hole injection efficiency and Gibbs free energy for the hole injection and longer excited state lifetime (important for reflecting the efficiency of solar cells) for the new abundant metal ions (V³⁺ and Cr²⁺) based dyes could provide promising sensitizers for efficient next generation DSSC's for p-SC.     

Effect of Substituents in Catechol Dye Sensitizers on Photovoltaic Performance of Type II Dye‐Sensitized Solar Cells

In order to provide a direction in molecular design of catechol (Cat) dyes for type II dye‐sensitized solar cells (DSSCs), the dye‐to‐TiO₂ charge‐transfer (DTCT) characteristics of Cat dyes with various substituents and their photovoltaic performance in DSSCs are investigated. The Cat dyes with electron‐donating or moderately electron‐withdrawing substituents exhibit a broad absorption band corresponding to DTCT upon binding to TiO₂ films, whereas those with strongly electron‐withdrawing substituents exhibit weak DTCT. This study indicates that the introduction of a moderately electron‐withdrawing substituent on the Cat moiety leads to not only an increase in the DTCT efficiency, but also the retardation of back electron transfer. This results in favorable conditions for the type II electron‐injection pathway from the ground state of the Cat dye to the conduction band of the TiO₂ electrode by the photoexcitation of DTCT bands.     

Two novel branched chain polymeric metal complexes based on Cd(II), Zn(II) with fluorene,thiophene, 8‐hydroxyquinoline,and 1,10‐phenathroline ligand: synthesis,characterization, photovoltaic properties,and their application in DSSCs

Two novel side chain polymeric metal complexes (PFT‐Cd and PFT‐Zn) have been designed, synthesized, and characterized. These polymers were found to be good thermally stable and high glass transitions temperature, which indicate that these polymers could be applied as photovoltaic materials for dye‐sensitized solar cells (DSSCs). The obtained polymers exhibited good photovoltaic property. The DSSCs based on the PFT‐Cd and PFT‐Zn exhibited a maximum solar‐to‐electricity conversion efficiency (η) up to 3.37% (J_sc = 7.27 mA/cm², V_oc = 0.67 V, and FF = 0.69) and 3.01% (V_oc = 0.72 V, J_sc = 6.10 mA/cm², FF = 0.69) under simulated AM 1.5 G solar irradiation (90–95 mW/cm²). The result shows that these novel materials are suitable for the dye‐sensitized solar cells. Copyright © 2011 John Wiley & Sons, Ltd.     

Ethoxy‐substituted Oligo‐phenylenevinylene‐Bridged Organic Dyes for Efficient Dye‐Sensitized Solar Cells

Organic dyes with ethoxy‐substituted oligo‐phenylenevinylene as chromophores were synthesized for dye‐sensitized solar cells (DSSCs), and the detailed relationships between the dye structures, photophysical properties, electrochemical properties, and performances of DSSCs were described. The dye S3O showed broad IPCE spectra in the spectral range of 350–750 nm, and the dye S1P showed solar energy‐to‐electricity conversion efficiency (() of up to 4.23% under AM 1.5 irradiation (100 mW/cm²) in comparison with the reference Ru‐complex (N719 dye) with an η value of 5.90% under similar experimental conditions.     

Unsymmetric Platinum(II) Bis(aryleneethynylene) Complexes as Photosensitizers for Dye‐Sensitized Solar Cells

Four new unsymmetric platinum(II) bis(aryleneethynylene) derivatives have been designed and synthesized, which showed good light‐harvesting capabilities for application as photosensitizers in dye‐sensitized solar cells (DSSCs). The absorption, electrochemical, time‐dependent density functional theory (TD‐DFT), impedance spectroscopic, and photovoltaic properties of these platinum(II)‐based sensitizers have been fully characterized. The optical and TD‐DFT studies show that the incorporation of a strongly electron‐donating group significantly enhances the absorption abilities of the complexes. The maximum absorption wavelength of these four organometallic dyes can be tuned by various structural modifications of the triphenylamine and/or thiophene electron donor, improving the light absorption range up to 650 nm. The photovoltaic performance of these dyes as photosensitizers in mesoporous TiO₂ solar cells was investigated, and a power conversion efficiency as high as 1.57 % was achieved, with an open‐circuit voltage of 0.59 V, short‐circuit current density of 3.63 mA cm^?2, and fill factor of 0.73 under simulated AM 1.5G solar illumination.     

Organic Dyes with Well‐Defined Structures for Highly Efficient Dye‐Sensitised Solar Cells Based on a Cobalt Electrolyte

Seven SGT organics dyes, containing bis‐dimethylfluoreneyl amino groups with a dialkoxyphenyl unit as an electron donor and a cyanoacrylic acid group as an anchoring group, connected with oligothiophenes, fused thiophenes and benzothiadiazoles as π‐bridges, were designed and synthesised for applications in dye‐sensitised solar cells (DSSCs). The photovoltaic performance of DSSCs based on organic dyes with oligothiophenes depends on the molecular structure of the dyes, in terms of the length change of the π‐bridging units. The best performance was found with a π‐bridge length of about 6 Å. To further enhance the photovoltaic performance associated with this concept, cyclopenta[1,2‐b:5,4‐b′]dithiophene (CPDT) and benzothiadiazole were introduced into the π‐bridge unit. As a result, the DSSC based on the organic dye containing the CPDT moiety showed the best photovoltaic performance with a short‐circuit photocurrent density (J_sc) of 14.1 mA cm^?2, an open‐circuit voltage (V_oc) of 0.84 V and a fill factor (FF) of 0.72, corresponding to an overall conversion efficiency (η) of 8.61 % under standard AM 1.5 irradiation.     

Bi‐anchoring Organic Dyes that Contain Benzimidazole Branches for Dye‐Sensitized Solar Cells: Effects of π Spacer and Peripheral Donor Groups

Benzimidazole‐branched bi‐anchoring organic dyes that contained triphenylamine/phenothiazine donors, 2‐cyanoacrylic acid acceptors, and various π linkers were synthesized and examined as sensitizers for dye‐sensitized solar cells. The structure–activity relationships in these dyes were systematically investigated by using absorption spectroscopy, cyclic voltammetry, and density functional theory calculations. The wavelength of the absorption peak was more‐heavily influenced by the nature of the π linker than by the nature of the donor. For a given donor, the absorption maximum (λ_max) was red‐shifted on changing the π linker from phenyl to 2,2′‐bithiophene, whilst the dyes that contained triphenylamine units displayed higher molar extinction coefficients (?) than their analogous phenothiazine‐based triphenylamine dyes, which led to good light‐harvesting properties in the triphenylamine‐based dyes. Electrochemical data for the dyes indicated that the triphenylamine‐based dyes possessed relatively low‐lying HOMOs, which could be beneficial for suppressing back electron transfer from the conduction band of TiO₂ to the oxidized dyes, owing to facile regeneration of the oxidized dye by the electrolyte. The best performance in the DSSCs was observed for a dye that possessed a triphenylamine donor and 2,2′‐bithiophene π linkers. Electron impedance spectroscopy (EIS) studies revealed that the use of triphenylamine as the donor and phenyl or 2,2′‐bithiophene as the π linkers was beneficial for disrupting the dark current and charge‐recombination kinetics, which led to a long electron lifetime of the injected electrons in the conduction band of TiO₂.     

Dye‐sensitized solar cells based on zinc(II) phthalocyanines bearing 3‐pyridin‐3‐ylpropoxy anchoring groups

In this study, nonperipherally tetra‐substituted ( 2 ), peripherally tetra‐substituted ( 3 ), and peripherally octa‐substituted ( 4 ) zinc(II) phthalocyanines were synthesized as sensitizers for dye‐sensitized solar cells (DSSCs) in which 3‐pyridin‐3‐ylpropoxy substituent acts as anchoring unit to bind TiO₂ surface. The optical results indicated that there is an interaction between the dyes and the TiO₂ surface. The photovoltaic performances of the DSSCs based on these dyes were found to depend on both the position and number of the substituents. Despite the more red‐shifted absorption, the DSSC based on 2 showed the conversion efficiency of 0.68%, which is lower than 1.36% and 0.92% for 3 and 4 , respectively, under one sun (AM 1.5G). The vertical orientation of the dye on TiO₂ surface could be the main reason for the higher photovoltaic performance of complex 3 , which is beneficial for not only injecting the electrons into the conduction band of TiO₂ but also reducing the charge recombination. Overall, these results demonstrate that the peripherally tetra‐substituted 3‐pyridin‐3‐ylpropoxy zinc(II) phthalocyanine complex ( 3 ) as a sensitizer can more efficiently utilize the photons in the red/near‐infrared region with respect to the other complexes studied.     

Substituent Effect on the π Linkers in Triphenylamine Dyes for Sensitized Solar Cells: A DFT/TDDFT Study

A series of metal‐free organic donor–π bridge–acceptor dyes are studied computationally using density functional theory (DFT) and time‐dependent DFT (TDDFT) approaches to explore their potential performances in dye‐sensitized solar cells (DSSCs). Taking triphenylamine (TPA) and cyanoacrylic acid moieties as donor and acceptor units, respectively, the effects of different substituents of the π linkers in the TPA‐based dyes on the energy conversion efficiency of the DSSCs are theoretically evaluated through optimized geometries, charge distributions, electronic structures, simulated absorption spectra, and free energies of injection. The results show that the molecular orbital energy levels and electron‐injection driving forces of the TPA dyes can be tuned by the introduction of substituents with different electron‐withdrawing or ‐donating abilities. The electron‐withdrawing substituent always lowers the energies of both frontier orbitals, while the electron‐donating one heightens them simultaneously. The efficiency trend of these TPA derivatives as sensitizers in DSSCs is also predicted by analyzing the light‐harvesting efficiencies and the free energies of injection. The following substituents are shown to increase the efficiency of the dye: OMe, OEt, OHe, and OH.     

Enhanced Performance of Quasi‐Solid‐State Dye‐Sensitized Solar Cells by Branching the Linear Substituent in Sensitizers Based on Thieno[3,4‐c]pyrrole‐4,6‐dione

Thieno[3,4‐c]pyrrole‐4,6‐dione‐based organic sensitizers with triphenylamine ( FNE38 and FNE40 ) or julolidine ( FNE39 and FNE41 ) as electron‐donating unit have been designed and synthesized. A linear hexyl group or a branched alkyl chain, the 2‐ethylhexyl group, is incorporated into molecular skeleton of the dyes to minimize intermolecular interactions. The absorption, electrochemical, and photovoltaic properties for these sensitizers were then systematically investigated. It is found that the sensitizers have similar photophysical and electrochemical properties, such as absorption spectra and energy levels, owing to their close chemical structures. However, the quasi‐solid‐state dye‐sensitized solar cells (DSSCs) based on the two types of sensitizers exhibit very different performance parameters. Upon the incorporation of the short ethyl group on the hexyl moiety, enhancements in both open‐circuit voltage (V_oc) and short‐circuit current (J_sc) are achieved for the quasi‐solid‐state DSSCs. The V_oc gains originating from the suppression of charge recombination were quantitatively investigated and are in good agreement with the experimentally observed V_oc enhancements. Therefore, an enhanced solar energy conversion efficiency (η) of 6.16 %, constituting an increase by 23 %, is achieved under standard AM 1.5 sunlight without the use of coadsorbant agents for the quasi‐solid‐state DSSC based on sensitizer FNE40 , which bears the branched alkyl group, in comparison with that based on FNE38 carrying the linear alkyl group. This work presents a design concept for considering the crucial importance of the branched alkyl substituent in novel metal‐free organic sensitizers.     

Two main chain polymeric metal complexes as dye sensitizers for dye‐sensitized solar cells based on the coordination of the ligand containing 8‐hydroxyquinoline and phenylethyl or fluorene units with Eu(III)

Two novel main chain polymeric metal complexes containing 8‐hydroxyquinoline europium complexes and phenylethyl or fluorene units: 1,4‐Dioctyloxy‐2,5‐bis[2‐(8‐hydroxyquinoline)‐vinyl]‐benzene Eu(III) (3) and 2,7‐bis[2‐(8‐hydroxyquinoline)‐vinyl]‐9,9′‐diocthylfluorene Eu(III) (4) with donor–acceptor‐π‐conjugated structure (D‐π‐A) have been synthesized and investigated as dye sensitizers for dye‐sensitized solar cells dyes (DSSCs). They have been determined and studied by FT‐IR, TGA, DSC, GPC, Elemental analysis, UV–vis absorption spectroscopy, photoluminescence spectroscopy, cyclic voltammetry, and application in dye‐sensitized solar cells (DSSCs) as dye sensitizers. On the basis of optimized dye and molecular structure, they have shown solar‐to‐electricity conversion efficiency 2.25% for 3 (J_sc = 4.77 mA cm^?2, V_oc = 630 mV, FF = 0.75) and 3.04% for 4 (J_sc = 6.33 mA cm^?2, V_oc = 640 mV, FF = 0.75), under the illumination of AM1.5G, 100 mW/cm². The IPCE of 3 and 4 are 30% and 46% at 400 nm, respectively. Besides, they showed good stabilities with thermal decomposition temperatures at 280 °C and 225 °C, respectively, which are suitable for DSSCs. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1943–1951, 2010     

A Promising Candidate with D‐A‐A‐A Architecture as an Efficient Sensitizer for Dye‐Sensitized Solar Cells

A series of metal‐free organic dyes with electron‐rich (D) and electron‐deficient units (A) as π linkers have been studied theoretically by means of density functional theory (DFT) and time‐dependent DFT calculations to explore the effects of π spacers on the optical and electronic properties of triphenylamine dyes. The results show that Dye 1 with a structure of D‐A‐A‐A is superior to the typical C218 dye in various key aspects, including the maximum absorption (λ_max=511 nm), the charge‐transfer characteristics (D/Δq/t is 5.49 Å/0.818 e^?/4.41 Å), the driving force for charge‐carrier injection (ΔG_inject=1.35 eV)/dye regeneration (ΔG_regen=0.27 eV), and the lifetime of the first excited state (τ=3.1 ns). It is thus proposed to be a promising candidate in dye‐sensitized solar cell applications.