A mixed‐valence CuII/CuI anion–cation complex: bis­[μ‐5‐sulfosali­cylato(3–)]bis­[(di‐2‐pyridylamine)­copper(II)] bis­[bis­(di‐2‐pyridyl­amine)copper(I)] dihydrate

The title compound, [Cu(C₇H₃O₆S)₂(C₁₀H₉N₃)₂][Cu^I(C₁₀H₉N₃)₂]₂·2H₂O, consists of anionic Cu^II moieties, cationic Cu^I species and uncoordinated water mol­ecules. The anionic dimeric unit consists of one crystallographically independent fully deprotonated 5‐sulfosalicylate (2‐oxido‐5‐sulfonatobenzoate) anion, a di‐2‐pyridylamine group and a Cu^II atom. Each Cu^II atom is five‐coordinate within a square‐pyramidal geometry. The anion lies on a special position of site symmetry. In the cationic monomer, the Cu^I atom adopts tetra­hedral geometry. The cations and anions are connected by O—H·O and N—H·O hydrogen bonds.     

A one‐dimensional heterometallic coordination polymer with a three‐dimensional supramolecular framework: poly[μ2‐aqua‐diaqua(2,2′‐bipyridyl)(μ5‐2‐sulfonatobutanedioato)copper(II)sodium(I)]

The title compound, [CuNa(C₄H₃O₇S)(C₁₀H₈N₂)(H₂O)₃]_n, consists of one Cu^II cation, one Na^I cation, one 2‐sulfonatobutanedioate trianion (SSC³⁻), one 2,2′‐bipyridyl (bpy) ligand and three coordinated water molecules as the building unit. The coordination of the Cu^II cation is composed of two pyridyl N atoms, one water O atom and two carboxylate O atoms in a distorted square‐pyramidal coordination geometry with an axial elongation. The Na^I cation is six‐coordinated by three water molecules and three carboxylate O atoms from three SSC³⁻ ligands in a distorted octahedral geometry. Two SSC³⁻ ligands link two Cu^II cations to form a Cu₂(SSC)₂(bpy)₂ macrocyclic unit lying across an inversion centre, which is further linked by Na^I cations via Na—O bonds to give a one‐dimensional chain. Interchain hydrogen bonds link these chains to form a two‐dimensional layer, which is further extended into a three‐dimensional supramolecular framework through π–π stacking interactions. The thermal stability of the title compound has also been investigated.     

Synthesis and Characterization of a New Thallium(I) Coordination Polymer of Tetrazolate Ligand as Precursor for Preparation of Thallium(III) Oxide Nanoparticles

A new thallium(I) coordination polymer, [Tl₂L · H₂O]_n ( 1 ) [H₂L = 5‐(4‐hydroxyphenyl)tetrazole], was synthesized and characterized by IR spectroscopy, elemental analysis, and X‐ray crystallography. The single‐crystal X‐ray diffraction data of compound 1 show the existence of two different Tl^I ions with differing coordination numbers. The coordination number of Tl^I(1) is four and that of Tl^I(2) is two. This coordination polymer was used as a precursor for the preparation of Tl^III oxide nanoparticles. Thallium(III) oxide was characterized by powder X‐ray diffraction and the morphology of nanoparticles characterized by scanning electron microscope (SEM).     

Binuclear Copper(II) Complexes with (1R*,4S*)-1-N-Morpholino-n-menth-8-en-2-one E-oxime: Synthesis,Structure, and Magnetic Properties

Copper(II) complexes with (1R*,4S*)-1-N-morpholino-n-menth-8-en-4-one (HL), namely, [Cu₂(HL)₂Cl₄] (I) and [Cu₂(HL)LCl₃] · CH₃CN (II), were synthesized and characterized by X-ray diffraction analysis, magnetic susceptibility, and EPR methods. The complexes have binuclear structures. In compound I, the coordination polyhedron of CuCl₃N₂ is a square pyramid in planar Cu₂Cl₂ metal cycle; the exchange couplings of unpaired electrons of Cu(II) ions are weak. Complex II incorporates polyhedra of CuCl₂N₂ (flattened tetrahedron) and of CuCl₂N₂O (trigonal bipyramid). The Cu₂ClNO metal cycle is nonplanar with antiferromagnetic exchange coupling and exchange parameter –2J = 182 cm^–1. The EPR spectrum of compound I are analyzed.     

Designed synthesis,structure, and 3-D topology of a supramolecular dimer and inorganic–organic cocrystal

Synthesis and structure of a supramolecular dimer and inorganic–organic cocrystal of composition [{Cu^IIL¹?(H₂O)}₂(C₈H₆O₄)] (1) are described (H₂L¹= N,N′-ethylenebis(3-ethoxysalicylaldimine); C₈H₆O₄ = terephthalic acid). Crystal engineering has been utilized for the designed synthesis of the title compound. Compound 1 crystallizes in a triclinic system with P 1 space group. The structure consists of terephthalic acid and two symmetry related inclusion products [Cu^IIL¹?(H₂O)], in which the water molecule is encapsulated in the O₄ compartment by forming bifurcated hydrogen bonds involving two hydrogen of water and phenolate and ethoxy oxygens of the compartmental ligand. Hydrogen bonding between encapsulated water molecules and terephthalic acid forms the supramolecular dimer. The title compound is an example of an inorganic–organic cocrystal as well. Weak interactions, such as semicoordination of phenoxo oxygen of one unit to the metal center of a symmetry related unit and C–H ··· O, and O–H ··· O hydrogen bonds result in generation of an overall 3-D topology in the title compound. The 3-D topology can be understood as interlinking of two different 2-D sheets.     

The trigonal–bipyramidal triiodo­thallium(III) complex [TlI3{(CH3)2SO}2]

The title compound, bis(dimethyl sulfoxide)triiodo­thallium(III), [TlI₃(C₂H₆OS)₂], was crystallized from equimolar amounts of Tl^II and I₂ in a dimethyl sulfoxide (DMSO) solution. After the initial redox reaction, the thallium(III)–iodo complex forms and precipitates as a DMSO solvate. In the crystal structure, Tl is surrounded by three iodide ligands in the equatorial plane and two O‐coordinated DMSO mol­ecules in the axial positions, forming a slightly distorted trigonal bipyramid. The complex lies on a twofold rotation axis, making the DMSO mol­ecules and two of the I atoms crystallographically equivalent.     

Intermolecular interaction and magnetic coupling mechanism of a mixed-valence CuIICuI tetranuclear complex with iodide bridge

A tetranuclear Cu^ICu^II mixed oxidation state complex, [Cu^II ₂(μ-I)₂Cu^I ₂(μ-I)₂(phenP)₂I₂] (phenPE: 2-(1H-pyrazol-1-yl)-1,10-phenanthroline), has been prepared and its crystal structure is determined by X-ray crystallography. In the complex, Cu^II is a distorted square pyramid and Cu^I is a distorted trigonal planar coordination environment; Cu^II and Cu^I are bridged by iodide. It is rare to form a Cu^II-iodide bond and for Cu^II and Cu^I to be bridged by iodide. In the crystal, there is a slipped π–π stacking between adjacent Cu^II complexes, which resulted in the formation of the 1-D chain along the c axis. The fitting for the variable-temperature magnetic susceptibility data gave magnetic coupling constant 2J?=??1.16?cm^?1 and it may be ascribed to the intermolecular π–π magnetic coupling pathway.     

HgII-Mediated TlI-to-TlIII Oxidation in Dynamic PbII/Tl Porphyrin Complexes

Compared with their purely organic counterparts, molecular switches that are based on metal ion translocations have been underexplored, and more particularly, it remains challenging to control the translocation of several particles in multisite receptors. Recently, bimetallic complexes that undergo double translocation processes have been developed with bis-strapped porphyrin ligands. To implement a redox control for these systems, we have investigated the formation of heterobimetallic lead/thallium complexes, with thallium in the +I and +III oxidation states. Two different complexes were characterized: 1) a Pb^II/Tl^I complex, in which both metal ions interact with the N-core on its different sides, and 2) a Pb^II/Tl^III complex with Tl^III selectively bound to the N-core and Pb^II selectively bound to the strap opposite to Tl^III. These two complexes undergo interconversion between their two degenerate forms (same coordination of the metal ions but on opposite sides) by different intra or intermolecular translocation pathways. In addition, conversion of the Pb^II/Tl^I complex into its Pb^II/Tl^III counterpart was achieved by addition of a stoichiometric amount of Hg^II salt as a sacrificial electron acceptor. These results further contribute to the elaboration of devices that feature redox-controlled compartmentalized double translocations.     

Structural characterization of two copper(II) complexes with oxime-type ligands

Two new linear Cu^II complexes [Cu(L¹)₂] (I) (HL¹ = (E)-3,5-dichloro-2-hydroxy benzaldehyde O-methyl oxime) and [Cu(L²)₂] (II) (HL² = (E)-3,5-dichloro-2-hydroxy benzaldehyde O-ethyl oxime) are synthesized and characterized by elemental analysis, IR, UV-Vis, and X-ray diffraction methods. X-ray crystallographic analyses indicate that complexes I and II have a similar structure consisting of one Cu^II ion and two L⁻ units. In the complexes, the Cu^II ion lying on an inversion centre is four-coordinated in a trans-CuN₂O₂ square planar geometry by two phenolate O and two oxime N atoms from two symmetry-related N,O-bidentate oxime-type ligands. However, the crystal structure of the two complexes is different: complex I forms an infinite three-dimensional supramolecular network structure through intermolecular hydrogen bonding and π...π interaction, while complex II forms an infinite one-dimensional supramolecular structure through intermolecular hydrogen bonds.     

Redox reactions involving rhenium and uranium hexafluorides,a convenient synthesis of β-uranium pentafluoride

Rhenium and uranium hexafluorides oxidise elemental iodine in iodine pentafluoride at ambient temperature to give the I₂⁺ cation. With UF₆ an additional reaction occurs to give β-uranium pentafluoride as one product, β-UF₅ is soluble in acetonitrile without disproportionation and is also formed from the reduction of UF₆ by MeCN. Copper, cadmium, and thallium metals are oxidised by ReF₆ in MeCN giving Cu^I, Cd^II, and Tl^I hexafluororhenates(V) but the reactions are complicated by reaction between ReF₆ and the solvent.     

A new semiconducting quaternary mixed halogenide: pentathallium dimercury pentabromide tetraiodide,Tl5Hg2Br5I4

A novel quaternary mixed halogenide, Tl₅Hg₂Br₅I₄, was synthesized by fusion of thallium bromide and mercury iodide in a 5:2 molar ratio. The crystal structure of Tl₅Hg₂Br₅I₄ represents a new series of composite structures described by the general formula nTlBr*mTl₂[HgBr₂I₂]; in this case, n = 4 and m = 8. Electronic structure calculations indicate that the title compound is a semiconductor.     

catena‐Poly[[[aqua[3‐(2‐pyridylsulfanyl)propionato N‐oxide‐κO1]copper(II)]‐μ‐[3‐(2‐pyridylsulfanyl)propionato N‐oxide‐κ3O3:O1,O1′] dihydrate]

In the title complex, {[Cu(C₈H₈NO₃S)₂(H₂O)]·2H₂O}_n, the Cu^II cation has a distorted square‐pyramidal coordination environment consisting of five O atoms, one from a water molecule, one from an N—O group and the other three from the carboxylate groups of two 3‐(2‐pyridylsulfanyl)propionate N‐oxide anions. The aqua[3‐(2‐pyridylsulfanyl)propionato N‐oxide]copper(II) moieties are bridged by 3‐(2‐pyridylsulfanyl)propionate N‐oxide anions to form an infinite three‐dimensional coordination polymer with a zigzag chain structure. The crystal structure is stabilized by hydrogen bonds.     

Synthese und Strukturuntersuchungen von Iodocupraten (I). XI. Die Kristallstruktur von Tl4Cu2I6

Syntheses and Structure Analyses of Iodocuprates (I). XI. Crystal Structure of Tl₄Cu₂I₆ Tl₄Cu₂I₆ was prepared by melting TlI and CuI or by hydrothermal synthesis in concentratet aqueous HI solution. The crystal structure analysis of Tl₄Cu₂I₆ (orthorhombic, Pnnm, a = 919.6(1), b = 955.2(2), c = 933.6(2) pm, Z = 2) shows that the compound contains dinuclear anions [Cu₂I₆]^4? which are built up by edge sharing CuI₄-tetrahedra. The coordination of Tl^I with I^? is analogous to the yellow TlI.     

Synthesis and properties of the Cu(II) complexes with chiral bis{( E )-[(1 S ,4 R )-Δ7,8-1-amino-2- para -menthalidene]aminohydroxy}methane (L — a derivative of natural terpenoid ( R )-(+)-limonene). Crystal structure of the [Cu(L)(μ-Cl)CuCl3] · iso -PrOH solvate

The Cu₂LCl₄ complex (I) with chiral bis{(E)-[(1S,4R)-Δ^7,8-1-amino-2-para-menthalidene]aminohydroxy} methane (L — a derivative of natural monoterpenoid (R)-(+)-limonene) is synthesized. The crystal structure of the solvate of complex I[Cu(L)(μ-Cl)CuCl₃] · iso-PrOH (II) is determined by X-ray diffraction analysis. Structure II is based on molecules of the [Cu(L)(μ-Cl)CuCl₃] binuclear complexes in which L is the tetradentate cycleforming ligand. One Cl atom manifests the bridging function. The CuN₄ Cl coordination unit is a square pyramid, and CuCl₄ is a distorted tetrahedron. The iso-PrOH molecules are localized in cavities between the layers of structure II. The μ_eff value for complex I is 2.56 μB and indicates the absence of an appreciable interaction between the Cu²⁺ ions in the Cu(II)-Cl-Cu(II) exchange cluster. The compound CuLCl₂· H₂O (III) is synthesized. The μ_eff value for compound III is 1.6 μB. Complexes I and III are studied by EPR and IR spectroscopy. Original Russian Text ? T.E. Kokina, L.A. Glinskaya, R.F. Klevtsova, E.G. Boguslavskii, L.A. Sheludyakova, S.N. Bisyaev, A.V. Tkachev, S.V. Larionov, 2009, published in Koordinatsionnaya Khimiya, 2009, Vol. 35, No. 3, pp. 202–211.     

Polynuclear thallium(I) N,N-cyclo-hexamethylenedithiocarbamate [Tl2{S2CN(CH2)6}2]n: Chemisorption properties and copper(II) fixation modes

The Cu²⁺ sorption properties of the polynuclear thallium(I) N,N-cyclo-hexamethylenedithiocarbamate complex [Tl₂{S₂CN(CH₂)₆}₂]n (I) are reported. The sorption capacity of the complex is ∼67 mg/g. According to EPR data, freshly precipitated I binds copper from the aqueous phase by chemisorption, which results in the formation of the β-form of the paramagnetic trinuclear complex [CuTl₂{S₂CN(CH₂)₆}₄] (containing a small amount of its α-form). Scanning electron microscopic data indicate cardinal reformation of the chemisorbent particles upon copper(II) sorption, including changes in the particle shape and size.     

A novel binuclear copper complex incorporating a nalidixic acid derivative displaying a one‐dimensional coordination polymeric structure

The identification of the antibacterial action of nalidixic acid (nx) was central to the development of the quinolone antibacterial compounds. The ability of the nx naphthyridyl ring to interact with and inhibit some proteins has encouraged the investigation of similar structures in the search for more active compounds with less adverse effects. The possibility of structural modification by attachment of other biologically active moieties to the naphthyridyl ring of nx allowed the development of new active antimicrobial molecules. Hydrazone derivatives of nx can be synthesized easily based on the condensation of the hydrazide derivative of nx with the desired aldehyde or ketone. Only a few complexes with nx hydrazone derivatives have been described but for none were the crystal structures elucidated. The synthesis of a new one‐dimensional Cu^II coordination polymer, namely catena‐poly[[copper(II)‐di‐μ‐chlorido‐copper(II)‐{μ‐1‐ethyl‐N′‐[(1H‐imidazol‐4‐yl)methylidene]‐7‐methyl‐4‐oxo‐1,4‐dihydro‐1,8‐naphthyridine‐3‐carbohydrazidato}‐[dimethanolcopper(II)]‐{μ‐1‐ethyl‐N′‐[(1H‐imidazol‐3‐yl)methylidene]‐7‐methyl‐4‐oxo‐1,4‐dihydro‐1,8‐naphthyridine‐3‐carbohydrazidato}] dichloride methanol tetrasolvate], {[Cu₃(C₁₆H₁₅N₆O₂)₂Cl₂(CH₃OH)₂]Cl₂·4CH₃OH}_n, with the (1H‐imidazol‐4‐yl)methylidene carbohydrazide derivative of nalidixic acid (denoted h4imi), is presented and its structure is compared to the density functional theory (DFT) optimized structure of free h4imi. The title structure presents an octahedral Cu^II ion on an inversion centre alternating along a polymer chain with a square‐pyramidal Cu^II ion, with the two Cu^II centres bridged by two chloride ligands. Hydrogen bonds involving chloride counter‐ions and methanol solvent molecules mediate the three‐dimensional packing of the polymer. Comparison of the geometrical results from the structure analysis with those derived from a DFT study of the free ligand reveal the differences that arise upon coordination.     

Nitrite and Nitric Oxide Interconversion at Mononuclear Copper(II): Insight into the Role of the Red Copper Site in Denitrification

Nitrite (NO₂⁻) and nitric oxide (NO) interconversion is crucial for maintaining optimum NO flux in mammalian physiology. Herein we demonstrate that [ L ₂Cu^II(nitrite)]⁺ moieties (in 2 a and 2 b ; where, L = Me₂PzPy and Me₂PzQu ) with distorted octahedral geometry undergo facile reduction to provide tetrahedral [ L ₂Cu^I]⁺ (in 3 a and 3 b ) and NO in the presence of biologically relevant reductants, such as 4-methoxy-2,6-di-tert-butylphenol (4-MeO-2,6-DTBP, a tyrosine model) and N-benzyl-1,4-dihydronicotinamide (BNAH, a NAD(P)H model). Interestingly, the reaction of excess NO gas with [ L ₂Cu^II(MeCN)₂]²⁺ (in 1 a ) provides a putative {CuNO}¹⁰ species, which is effective in mediating the nitrosation of various nucleophiles, such as thiol and amine. Generation of the transient {CuNO}¹⁰ species in wet acetonitrile leads to NO₂⁻ as assessed by Griess assay and ¹⁴N/¹⁵N-FTIR analyses. A detailed study reveals that the bidirectional NO_x-reactivity, namely, nitrite reductase (NIR) and NO oxidase (NOO), at a common Cu^II site, is governed by the geometric-preference-driven facile Cu^II/Cu^I redox process. Of broader interest, this study not only highlights potential strategies for the design of copper-based catalysts for nitrite reduction, but also strengthens the previous postulates regarding the involvement of red copper proteins in denitrification.     

Synthesis,Structures and Spectroscopic Properties of Platinum(II), Palladium(II) and Copper(I) Halide Complexes with Pyrimidine‐phosphine Ligand

The reactions of pyrimidine‐phosphine ligand N‐[(diphenylphosphino)methyl]‐2‐pyrimidinamine ( L ) with various metal salts of Pt^II, Pd^II and Cu^I provide three new halide metal complexes, Pt₂Cl₄(μ‐L)₂·2CH₂Cl₂ ( 1 ), Pd₂Cl₄(μ‐L)₂ ( 2 ), and [Cu₂(μ‐I)₂L₂]_n ( 3 ). Single crystal X‐ray diffraction studies show that complexes 1 and 2 display a similar bimetallic twelve‐membered ring structure, while complex 3 consists of one‐dimensional polymeric chains, which are further connected into a 2‐D supramolecular framework through hydrogen bonds. In the binuclear complexes 1 and 2 , the ligand L serves as a bridge with the N and P as coordination atoms, but in the polymeric complex 3 , both bridging and chelating modes are adopted by the ligand. The spectroscopic properties of complexes 1 ‐ 3 as well as L have been investigated, in which complex 3 exhibits intense photoluminescence originating from intraligand charge transfer (ILCT) π→π* and metal‐to‐ligand charge‐transfer (MLCT) excited states both in acetonitrile solution and solid state, respectively.     

Di‐μ‐aqua‐bis­[(N‐salicyl­idene‐β‐alaninato‐κ3O,N,O′)copper(II)] urea disolvate

Crystals of the title compound, [Cu₂(C₁₀H₉NO₃)₂(H₂O)₂]·2CH₄N₂O, consist of two (N‐salicyl­idene‐β‐alaninato‐κ³O,N,O′)copper(II) coordination units bridged by two water moieties to form a dimer residing on a crystallographic inversion center, along with two uncoordinated urea mol­ecules. The Cu^II atom has square‐pyramidal coordination, with three donor atoms of the tridentate Schiff base and an O atom of the bridging aqua ligand in the basal plane. The axial position is occupied by the second bridging water ligand at a distance of 2.5941 (18) Å. Hydro­gen bonds between mol­ecules of urea and the neighboring dimer units lead to the formation of a two‐dimensional grid of mol­ecules parallel to [101]. The superposition of the normals of the pyramidal base planes in the direction [100] indicates possible π–π interactions between the neighboring units.     

Bis(μ‐phenyl 2‐pyridyl ketone N4,N4‐butane‐1,4‐diylthiosemicarbazonato)bis[chlorocopper(II)]

The title compound, [Cu₂(C₁₇H₁₇N₄S)₂Cl₂], exhibits a dimeric structure related by a centre of symmetry. The monomers are linked to each other by the longest Cu—S apical distance observed to date among Cu^II square‐pyramidal complexes of N⁴‐substituted thio­semicarbazones. Each Cu^II atom deviates from the coordination square plane, which contains the pyrid­yl and imine N atoms, the thiol­ate S atom and the Cl⁻ anion, towards the S atom of the adjacent monomer. The dimers pack in a zigzag manner through the crystal.