Insights into the extraction mechanism from the coordination chemistry of copper(II) with a synergistic mixture which mimics Versatic10 and 2-ethylhexyl 4-pyridinecarboxylate ester

In the present work, a copper(II) synergist complex with methyl isonicotinate (L^I, a short chain analog of 2-ethylhexyl 4-pyridinecarboxylate ester) and isobutyric acid (HB^I, a short chain analog of Versatic10) was synthesized and studied by X-ray single-crystal diffraction. The results indicated that the copper(II) synergist complex obtained with isobutyric acid and methyl isonicotinate crystallizes in the monoclinic C2/c space group and confirmed the composition [Cu(B^I)₂(L^I)]₂. The crystal structure consisted of centrosymmetric dimeric units, in which the two Cu ions are bridged in pairs by four carboxylate groups of the deprotonated isobutyric acid. In order to bridge the gap between the solid-state structure of the copper(II) synergist complex obtained with isobutyric acid and methyl isonicotinate and the solution structure of the extracted copper(II) complex in the non-polar organic phase, the two copper(II) complexes were further investigated by Fourier transform infrared spectroscopy (FT-IR) and electrospray ionization mass spectrometry (ESI-MS). The results indicated that the extracted copper(II) complex in the non-polar organic phase has a similar coordination structure as the copper(II) synergist complex obtained with isobutyric acid and methyl isonicotinate.     

Structural Insights into the Coordination and Extraction Mechanism of Nickel(II) with Dinonylnaphthalene Sulfonic Acid and n‐Hexyl 3‐Pyridinecarboxylate Ester as Extractants

In this work, a nickel(II) synergist complex with methyl isonicotinate (B^I, a short chain analog of n‐hexyl 3‐pyridinecarboxylate ester) and naphthalene‐2‐sulfonic acid (HNS, a short chain analog of dinonylnaphthalene sulfonic acid) was synthesized and studied by single‐crystal X‐ray diffraction. The nickel(II) complex crystallizes in the monoclinic P 2₁/n space group with the composition [Ni(H₂O)₄(B^I)₂](NS)₂·2H₂O. The Ni(II) ions of these crystallographically independent molecules lie on an inversion center, forming a trans‐form distorted octahedral coordination structure. The nickel(II) ions can coordinate with four water molecules and two B^I ligands, resulting in a mono‐metallic structure [Ni(H₂O)₄(B^I)₂]²⁺. There is no direct interaction between nickel(II) and sulfonic oxygen atoms of the sulfonate anions, but hydrogen bonds form between sulfonic oxygen atoms and water molecules in the synergist complex. In order to further elucidate the solution structure of the nickel(II) complexes with the actual synergistic mixture containing n‐hexyl 3‐pyridinecarboxylate ester and dinonylnaphthalene sulfonic acid in the nonpolar organic phase, the nickel(II) complexes were studied by electrospray ionization mass spectrometry. The results indicated that the extracted nickel(II) complexes in the nonpolar solvent have a similar coordination structure as that of the crystalline nickel(II) synergist complex.     

High enrichment method for the determination of ultra-trace levels of cobalt by liquid—liquid extraction using water/oil/water emulsions as liquid surfactant membranes

A high preconcentration method for the determination of cobalt by graphie furnace atomic absorption spectrometry using liquid surfactant membranes was developed. Droplets of dilute hydrochloric acid in kerosene containing 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester emulsion coated with sorbitan monooleate are dispersed in an aqueous sample solution. Cobalt(II) diffuses through the liquid membrane to form the complex with the ester and the analyte ion is extracted successively into the inner acidic aqueous phase. A 550-fold enrichment of cobalt(II) and a detection limit of 10 pg ml^?1 are achieved.     

The Coordination Structure of the Extracted Cobalt(II) Complex with a Synergistic Mixture Containing Lix63 and Versatic10

In the present work, the cobalt(II ) synergist complex with isobutyric acid (HL^I ) and 5‐hydroxy‐4‐octanone oxime (HB^I ), which were the corresponding short‐chain analogs of active synergistic mixture of Versatic10 (HL ) and Lix63 (5,8‐diethyl‐7‐hydroxy‐6‐dodecanoneoxime, HB ), was prepared and studied by X‐ray single‐crystal diffraction. The crystal structure of the cobalt(II ) synergistic complex showed that the composition of the complex was Co(HB^I )₂(L^I )₂ with a cis‐form octahedron geometry structure. Both intra and intermolecular hydrogen bonding between the uncoordinated carbonyl oxygen atom of the deprotonated monodentate anionic ligand L^I and the hydrogen atom of the α‐hydroxy or the oxime hydroxyl group of HB^I were observed in the crystal lattice. In order to bridge the gap between the solid‐state structure of the cobalt(II ) synergist complex and the solution structure of the extracted cobalt(II ) complex with the actual synergistic mixture containing Versatic10 and Lix63 in the nonpolar organic phase, both the cobalt(II ) synergistic complex and the extracted cobalt(II ) complex were further investigated by Fourier transform infrared spectroscopy (FT‐IR ) and electrospray ionization mass spectrometry (ESI‐MS ). The results indicated that the extracted cobalt(II ) complex in the nonpolar organic phase might possess a similar coordination structure as that of the cobalt(II ) synergist complex.     

Syntheses and crystal structures of cobalt(II) and zinc(II) complexes with 4′-methoxy-5,6,7-trihydroxyisoflavone-3′-sulfonate

Abstract Sodium 4′-methoxy-5,6,7-trihydroxyisoflavone-3′-sulfonate (1) is synthesized by the sulfonation of 6-hydroxybiochanin A and its structure is characterized by elemental analysis, ¹H-NMR, and IR spectroscopy. It is assembled with cobalt(II) or zinc(II), hexaquacobalt(II) bis(4′-methoxy-5,6,7-trihydroxyisoflavone-3′-sulfonate) tetrahydrate (2) and hexaquazinc(II) bis(4′-methoxy-5,6,7-trihydroxyisoflavone-3′-sulfonate) tetrahydrate (3) are obtained and characterized by IR spectroscopy. Simultaneously, their three-dimensional structures are determined by single-crystal X-ray analysis. It turns out that 2 and 3 are isomorphous and crystallize in the triclinic crystal system, space group P-1. Hydrophilic regions are defined by O–H···O hydrogen bonds involving the coordinated water molecules, the included water molecules, and sulfonate groups. Aromatic π...π stacking interactions assemble the isoflavone skeletons into columns and these columns formed hydrophobic regions. The sulfonate group is an important bridge as a structural link between the hydrophilic regions and the hydrophobic regions. Hydrogen bonds, π...π stacking interactions and the electrostatic interactions assemble 2 and 3 into three-dimensional network structures. Graphical abstract Sodium 4′-methoxy-5,6,7-trihydroxyisoflavone-3′-sulfonate (1) is synthesized and assembled with cobalt(II) or zinc(II). Hexaquacobalt(II) bis(4′-methoxy-5,6,7-trihydroxyisoflavone-3′-sulfonate) tetrahydrate (2) and hexaquazinc(II) bis(4′-methoxy-5,6,7-trihydroxyisoflavone-3′-sulfonate) tetrahydrate (3) are obtained and determined by single-crystal X-ray analysis. It turns out that 2 and 3 are isomorphous and assembled into three-dimensional network structures, characterized by hydrophilic regions defined by hydrogen bonds involving the coordinated water molecules, the included water molecules, and the sulfonate groups and by hydrophobic columns, formed by the isoflavone skeletons, interacting through π...π stacking interactions.      

Benzo[h]quinoline based Macrocyclic Copper(II), Cobalt(II) Complexes: Synthesis,Characterization and Light induced DNA Cleavage Studies

A new ligand dibenzo[h]quinolineno[1,3,7,9] tetraazacyclododecine-7,15 (14H, 16H)-dibenzene (L) and its Co(II)/Cu(II) metal complexes of type [MLX₂] (Where (M = Co(II) (5), Cu(II) (6) and X = Cl) were synthesized and are well characterized by FT-IR, ¹H-NMR, FAB mass elemental analysis, and electronic spectral data. The role of the cobalt/copper metals in photo-induced DNA cleavage reactions was explored by designing complex molecules having macrocyclic structure. Finally, we have shown that photocleavage of plasmid DNA is more efficiently enhanced when this macrocyclic ligand is irradiated in the presence of copper(II) than that of cobalt metal.     

Phase separation in solvent extraction of copper or nickel from acidic solution using a sulfonic acid (HDNNS) and a carboxylate ester (4PC)

Phase separation behavior is a critical character in determining the usefulness of a solvent extraction system in hydrometallurgy. A survey of the synergistic mixture containing dinonylnaphthalene sulfonic acid (HDNNS) and 2-ethylhexly 4-pyridinecarboxylate ester (4PC) for the extraction of copper or nickel from acidic single metal sulfate solution has been carried out to suggest how the physicochemical properties (density, viscosity and interfacial tension) and the morphology of the reverse micelles in the loaded organic phase affect the phase separation behavior in this paper. The specific settling rates (SSR), physicochemical properties, metal concentration and the excess water uptake (the content of water solubilized into the water pool of the reverse micelles) in the loaded organic phase during the extraction of Cu(II)/Ni(II) have been measured. The results show that the most effective parameters affecting the phase separation behavior are the viscosity and the excess water uptake of the loaded organic phase. We assume that the deceleration of the SSR is mainly due to the apparent increase of these two parameters or in a microscopic view, the apparent change of the morphology of the reverse micelles in the loaded organic phase. The small angle X-ray scattering (SAXS) results provide a direct evidence of such microstructural changes and well supports our assumption.     

Synthesis,crystal structure,and luminescence properties of a novel 2D cobalt(II) polymer with 1-naphthalene acetate

The coordination compound [Co(H₂O)₂(C₁₂H₉O₂)₂] _n (I) was prepared by the reaction of 1-naphthaleneacetic acid and cobalt(II) acetate in a basic medium and was fully characterized by X-ray diffraction, elemental analysis, FT-IR, TG, and luminescence spectra. In the complex, the six-coordinated Co(II) ions are linked into a two-dimensional infinite layer with hydrophobic exterior by 1-naphthaleneacetate anions. At room temperature solid complex I exhibits favorable fluorescent emission resulted from the intraligand electronic transfer.     

Synthesis and characterization of a biphenyl-linked hemicryptophane and an endohedral cobalt(II) complex

Hemicryptophanes are covalent molecular cages, constructed from a cyclotriveratrylene-based host unit and a functional unit linked by covalent spacers, which have been designed to accommodate endohedral functionalities in the cavity. In this study, the synthesis and characterization of the rigid, biphenyl-linked hemicryptophane 1 were investigated by NMR, ESI-MS, and X-ray crystallography. The structure of the inclusion complex, in which a dichloromethane molecule was constructed encapsulated within 1, was characterized by X-ray crystallography. An endohedral, cobalt(II) hemicryptophane complex 2 was also synthesized and characterized ESI-MS and X-ray crystallography. The X-ray crystal structure of 2 showed that the biphenyl-linked hemicryptophane had three components—a molecule each of chloroform and acetonitrile, and a cobalt(II) ion—within its cavity.     

Transport of alkali and alkaline earth cations by a crown ether-alkylphosphoric acid system

Abstract

Competitive transport of alkali and alkaline earth cations has been carried out by using a mixed carrier system composed of dibenzo-14-crown-4 and bis(2-ethylhexyl)phosphoric acid. In the absence of crown ether, bis(2-ethylhexyl)phosphoric acid transported alkaline earth cations with high selectivity. The combination of dibenzo-14-crown-4 and bis(2-ethylhexyl)phosphoric acid showed a synergistic enhancement in lithium transport, and the enhancement effect was not apparent in transport of other cations. On the other hand, the mixed carrier systems consisting of dibenzo-14-crown-4 and dodecylbenzenesulfonic acid, and of dibenzo-14-crown-4 and 1-bromohexadecanoic acid exhibited the enhancement effects both in lithium transport and in sodium transport. The formation of the synergistic complex was analyzed by using fast atom bombardment mass spectrometry.     

The separation of zinc(II) and cadmium(II) by liquid-liquid extraction

The extraction of Zn(II) and Cd(II) from thiocyanate solutions with bis-2-ethylhexyl sulphoxide (B₂EHSO) in benzene as an extractant has been studied by tracer techniques. For comparison, extraction has also been carried out with tributylphosphate (TBP). The extraction data have been analysed by both graphical and theoretical methods by taking into account complexation of the metal in the aqueous phase by inorganic ligands and plausible complexes extracted into the organic phase. The results demonstrate that Zn(II) is extracted as Zn(SCN)₂·2B2EHSO and Zn(SCN)₂·2TBP. In the case of Cd(II), the extracted species are Cd(SCN)₂·4B2EHSO/4TBP. The synergistic extraction of Zn(II) and Cd(II) with mixtures of 1-phenyl-3-methyl-4-benzoyl-pyrazolone-5 (HPMBP) and B2EHSO or TBP or trioctylphosphine oxide (TOPO) from acetate buffer solutions has also been investigated. Zn(II) is extracted as Zn(PMBP)₂·B2EHSO/TBP/TOPO. On the other hand, Cd(II) is found to be not extracted with these mixed-ligand systems under the experimental conditions. These results also demonstrate the mutual separation of Zn(II) and Cd(II) using the synergistic extraction with HPMBP in the presence of various neutral oxodonors.     

Application of emulsion liquid membranes to recover cobalt ions from a dual-component sulphate solution containing nickel ions

Emulsion liquid membranes (ELMs) containing 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (PC-88A) have been applied to recover cobalt II ions from a dilute sulphate solution containing equal amounts of nickel II ions (0.16 g/l). We focused on the study to develop an effective technique to recover cobalt as a target metal. It is found that polyamine (PX 100) membranes allow better permeation rates of cobalt ions than sorbitan monooleate (Span 80) membranes. The separation factor (β_Co/Ni) in polyamine membranes averaged 70 at a carrier concentration of 12 mol/m³ and feed solution pH 5.5. The permeation rate of Co II was found to increase proportionately with feed pH while for Ni II it decreased substantially at pH above 5.5 indicative of slower interfacial reaction rate. We found that short contact time (4–6 min) of feed solution and emulsion improved separation factor (β_Co/Ni) at feed pH above 5.5 and also minimized chances of emulsion break up. We have also observed that Span 80 membranes are hydrolyzed readily in a moderate acidic sulphate solution (pH 4.0–5.5) to form viscous gels. Results have shown that excess carrier [(HR)₂] affects the stability of emulsion and thus the separation factor. The critical ratio of carrier to emulsifier [(HR)₂]/[C_sf] was found to be approximately 0.5. This paper concludes with a discussion on the prospects of ELM system in practical use.     

THE POLYMERIC COPPER(II) COMPLEX 1, 10-PHENANTHROLINE -N,N '-(μ-ISONICOTINATO-N,O) MONOAQUACOPPER(II) NITRATE DIHYDRATE

Abstract

The title complex has been prepared and its structure determined by X-ray diffraction. The complex crystallizes in space group C2/c with a = 26.892(5), b = 10.479(4), c = 14.179(2) Å, β = 98.59(2)°. Isonicotinate anions bridge adjacent Cu(II) atoms through the pyridine N atom and the carboxyl O atom to form zigzag polymeric chains along the b axis. The carboxyl group of the isonicotinate anion coordinates to the Cu(II) atom as a unidentate. Based on the molecular structure the infrared spectrum is discussed.     

Synthesis of high silicon content SAPO(4)-5 using anionic surfactants in a hexanol/aqueous two phase media

High silicon content SAPO(4)-5 (up to 0.511 atoms per unit cell) has been synthesised, using sodium 3-bromopropanesulfonate, sodium 1-butanesulfonate, sodium naphthalene-1-sulfonate or sodium n-decyl sulfate as surfactants; the SiO2 in the reaction gels ranged up to 3.0 (molar ratio), silicon incorporation was confirmed by XRD, XRF, TG-DTA, FT-IR and SEM techniques.     

Metal ion-promoted hydrolyses of ligand esters in the presence of polycarboxylates

Copper(II), nickel(II), cobalt(II), and zinc(II) accelerated the carboxylate-catalyzed hydrolyses of 2,4-dinitrophenyl isonicotinate (DNPI) and 2,4-dinitrophenyl picolinate (DNPP). The rate enhancement effect of the metal ions in the partially neutralized poly(methacrylic acid)- or poly(acrylic acid)-catalyzed hydrolysis of DNPI was greater than that in the monomeric acetate ion-catalyzed hydrolysis of this ester. This feature of the reactions was explained by the formation of a ternary complex composed of the polymer, the metal ion, and the substrate, in which the metal ion serves as a template for the nucleophilic reaction between the carboxylate groups along the polymer chain and the coordinated substrate. In DNPP the metal ion effect on the polycarboxylate-catalyzed hydrolysis was smaller than that on the acetate ion-catalyzed hydrolysis. This was interpreted as the result of differences in the structure of the complex.     

Extraction of cobalt by the AOT microemulsion system

The extraction of cobalt by Winsor II microemulsion system was studied. In the bis (2-ethylhexyl) sulfosuccinate sodium salt (AOT)/n-pentanol/n-heptane/NaCl system, AOT was used as a anionic surfactant to form microemulsion in n-heptane, n-pentanol was injected in the microemulsion as a cosurfactant. Co(II) was found to be extracted into the microemulsion phase due to ion pair formation such as Co²⁺(R–SO₃ ⁻)Cl. The influence of different parameters such as the volume ratio of aqueous phase to microemulsion, surfactant concentration, pH of the feed solutions, cosurfactant concentration as well as temperature on the extraction yield (E%) were investigated. The results showed that it was possible to extract 95% of cobalt by the AOT Winsor II microemulsion.     

Ag(I) and Zn(II) isonicotinate complexes: design,characterization, antimicrobial effect,and CT-DNA binding studies

Trinuclear Ag(I) (1) and dinuclear and mononuclear Zn(II) isonicotinate (2 and 3) complexes were prepared and characterized by X-ray crystallography, elemental analysis, IR spectroscopy, and thermal analysis. Single-crystal analysis of the Ag(I) complex reveals two different monodentate carboxylate coordination modes, protonated and deprotonated, respectively. IR spectra showed correlations between isonicotinate coordination modes and Δ(ν_as???ν_s)_IR values. In addition, the hydrogen bonds significantly influence a position of carboxylate absorption bands. Moreover, IC₅₀ and MIC data for bacteria, yeasts, and filamentous fungi were determined and the binding of Ag(I) and Zn(II) complexes to calf thymus DNA was investigated using electronic absorption, fluorescence, and CD measurements. Biological tests showed that the Ag(I) complex is more active than commercially used Ag(I) sulfadiazine against Escherichia coli. The fluorescence spectral results indicate that the complexes can bind to DNA through an intercalative mode. The Stern–Volmer quenching constants for investigated complexes obtained from the linear quenching plot are in the range of 1.67 × 10⁴–3.42 × 10⁴ M^?1.     

Acridine-based ligands from cobalt(II) mediated rearrangement of diphenylamine-based starting materials

The synthesis and characterisation of two cobalt(II) complexes, [Co^IIL^Br-acrCl₂] (1a) and [Co^IIL^H-acrCl₂] (1b), with acridine head-units resulting from an unexpected ligand rearrangement from a diphenylamine head-unit, and the intended cobalt(II) complex, Co^IIL^Br-dpa(Cl)(H₂O) (2), are reported. Single crystals of the two dark green acridine-based cobalt(II) complexes, 1a and 1b, form in a one-pot reaction of cobalt(II) chloride, the chosen diphenylamine-2,2′-dicarboxaldehyde (Ia 4,4-′dibromo- or Ib unsubstituted), triethylamine and two equivalents of 2,4-dimethylaniline in acetonitrile, in 23% yield. In contrast, the intended diphenylamine-based complex was isolated in two steps: first isolation of the Schiff base ligand, then complexation with cobalt(II) chloride and deprotonation with potassium tert-butoxide, in methanol/dichloromethane, giving 2 as a bright yellow solid in 67% yield. All three complexes feature cobalt(II) centres, with N₂Cl₂ approximately tetrahedral coordination for 1a and 1b confirmed by single crystal structure determinations. It is proposed that after one imine ‘arm’ forms, cobalt(II) coordination facilitates the other aldehyde undergoing an intramolecular cyclisation to form the new heterocyclic acridine head-unit. The structures of both of the resulting acridine-based complexes, 1a and 1b, and that of the originally intended Schiff base ligand, HL^Br-dpa, were confirmed by single-crystal X-ray diffraction. These are the first examples of complexes of an acridine ligand of this type.     

New cobalt(II) coordination polymer based on carboxyphenyl-tpy ligand: Photoluminescence,crystal structures and magnetic properties,without orbital contribution

One coordination polymer, [Co(3-ctpy)₂(H₂O)₂]_n*2nEtOH (1), was synthesized by a solvothermal method mixing the complex precursor cobalt(II) acetylacetonate (Co(acac)₂*2H₂O) with 4′-(4-carboxyphenyl)-3,2′:6′,3″-terpyridine (3-Hctpy). This paramagnetic complex has been isolated as a neutral, air and thermal stable solid and has been characterized by elemental analysis, FT-IR and single-crystal X-ray diffraction analysis. The thermal stability and photoluminescence properties were studied in the solid state. The magnetic behavior presents an interesting challenge since the Co(II) ion has a spin 3/2, which leads to multiple possibilities under the influence of an energy crystal field, from the identification of the ground state to possible transitions to excited states. The usual orbital contribution of the magnetic moment has been extinguished, due to an axially distorted octahedral environment for cobalt, changing the O_h symmetry (with ⁴T_1g ground state) to D_4h (with ⁴A_2g ground state). This decrease in symmetry is responsible for the quenching of the orbital contribution, as will be discussed in this article.     

Reversed-phase partition chromatographic separations with 2-ethylhexyl dihydrogen phosphate and di-2-ethylhexyl hydrogen phosphate

Di-2-ethylhexyl hydrogen phosphate (HDEHP) and 2-ethylhexyl dihydrogen phosphate (H(2)MEHP) are compared as stationary phases in reversed-phase chromatography of selected lanthanides, strontium, yttrium, barium, manganese(II), iron(III), cobalt(II), nickel, gold(III), platinum(IV), palladium(II) and silver. Chromatograms were mainly developed with hydrochloric acid at various concentrations. In general H(2)MEHP was found to be less satisfactory than HDEHP. Development of chromatograms by dilute aqueous electrolytes on paper is slower and separations of chemically similar metals such as lanthanides is not encouraging. However, movement of lanthanides by EDTA at pH 3 in an aqueous sodium perchlorate medium occurs only on H(2)MEHP-treated paper. Good separations of iron(III) and cobalt(II) are possible on paper treated with either ester, and gold(III) and platinum(IV) are separated on HDEHP-impregnated paper. Column methods for the separation of carrier-free gold-199 and iron-59 from macro-amounts of neutron-irradiated platinum and cobalt, respectively, have been developed.