Thermodynamic properties of strontium metaniobate SrNb<Subscript>2</Subscript>O<Subscript>6</Subscript>

The heat capacity and the enthalpy increments of strontium metaniobate SrNb₂O₆ were measured by the relaxation method (2-276 K), micro DSC calorimetry (260-320 K) and drop calorimetry (723-1472 K). Temperature dependence of the molar heat capacity in the form C _pm=(200.47±5.51)+(0.02937±0.0760)T-(3.4728±0.3115)·10⁶/T ² J K⁻¹ mol⁻¹ (298-1500 K) was derived by the least-squares method from the experimental data. Furthermore, the standard molar entropy at 298.15 K S _m⁰ (298.15 K)=173.88±0.39 J K⁻¹ mol⁻¹ was evaluated from the low temperature heat capacity measurements. The standard enthalpy of formation Δ_f H ⁰ (298.15 K)=-2826.78 kJ mol⁻¹ was derived from total energies obtained by full potential LAPW electronic structure calculations within density functional theory.     

Heat capacities and absolute entropies of UTi<Subscript>2</Subscript>O<Subscript>6</Subscript> and CeTi<Subscript>2</Subscript>O<Subscript>6</Subscript>

Summary As part of a larger study of the physical properties of potential ceramic hosts for nuclear wastes, we report the molar heat capacity of brannerite (UTi₂O₆) and its cerium analog (CeTi₂O₆) from 10 to 400 K using an adiabatic calorimeter. At 298.15 K the standard molar heat capacities are (179.46±0.18) J K^-1 mol^-1 for UTi₂O₆ and (172.78±0.17) J K^-1 mol^-1 for CeTi₂O₆. Entropies were calculated from smooth fits of the experimental data and were found to be (175.56±0.35) J K^-1 mol^-1 and (171.63±0.34) J K^-1 mol^-1 for UTi₂O₆ and CeTi₂O₆, respectively. Using these entropies and enthalpy of formation data reported in the literature, Gibb’s free energies of formation from the elements and constituent oxides were calculated. Standard free energies of formation from the elements are (-2814.7±5.6) kJ mol^-1 for UTi₂O₆ and (-2786.3±5.6) kJ mol^-1 for CeTi₂O₆. The free energy of formation from the oxides at T=298.15 K are (-5.31±0.01) kJ mol^-1 and (15.88±0.03) kJ mol^-1 for UTi₂O₆ and CeTi₂O₆, respectively.     

Heat capacity and heat content of BiNb<Subscript>5</Subscript>O<Subscript>14</Subscript>

The heat capacity and the heat content of bismuth niobate BiNb₅O₁₄ were measured by the relaxation time method, DSC and drop method, respectively. The temperature dependence of heat capacity in the form C _pm=455.84+0.06016T–7.7342·10⁶/T ² (J K^–1 mol^–1) was derived by the least squares method from the experimental data. Furthermore, the standard molar entropy at 298.15 K S _m=397.17 J K^–1 mol^–1 was derived from the low temperature heat capacity measurement.     

Kinetics of Li-ion transfer reaction at LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>, LiCoO<Subscript>2</Subscript>, and LiFePO<Subscript>4</Subscript> cathodes

Kinetics of LiFePO₄, LiMn₂O₄, and LiCoO₂ cathodes operating in 1 M LIPF₆ solution in a mixture of ethylene carbonate and dimethyl carbonate was deduced from impedance spectra taken at different temperatures. The most striking difference of electrochemical impedance spectroscopy (EIS) curves is the impedance magnitude: tens of ohms in the case of LiFePO₄, hundreds of ohms for LiMn₂O₄, and thousands of ohms for LiCoO₂. Charge transfer resistances (R _ct) for lithiation/delitiation processes estimated from the deconvolution procedure were 6.0 Ω (LiFePO₄), 55.4 Ω (LiCoO₂), and 88.5 Ω (LiMn₂O₄), respectively. Exchange current density for all the three tested cathodes was found to be comparable (0.55–1·10^?2 mAcm^?2, T = 298 K). Corresponding activation energies for the charge transfer process, \( {E}_{ct}^{\#} \), differed considerably: 66.3, 48.9, and 17.0 kJmol^?1 for LiMn₂O₄, LiCoO₂, and LiFePO₄, respectively. Consequently, temperature variation may have a substantial influence on exchange current densities (j _o) in the case of LiMn₂O₄ and LiCoO₂ cathodes.     

Enhanced electrochemical performance of LiFePO<Subscript>4</Subscript>/C nanocomposites due to in situ formation of Fe<Subscript>2</Subscript>P impurities

We have studied LiFePO₄/C nanocomposites prepared by sol-gel method using lauric acid as a surfactant and calcined at different temperatures between 600 and 900 °C. In addition to the major LiFePO₄ phase, all the samples show a varying amount of in situ Fe₂P impurity phase characterized by x-ray diffraction, magnetic measurements, and Mössbauer spectroscopy. The amount of Fe₂P impurity phase increases with increasing calcination temperature. Of all the samples studied, the LiFePO₄/C sample calcined at 700 °C which contains ～15 wt% Fe₂P shows the least charge transfer resistance and a better electrochemical performance with a discharge capacity of 136 mA h g^?1 at a rate of 1 C, 121 mA h g^?1 at 10 C (～70 % of the theoretical capacity of LiFePO₄), and excellent cycleability. Although further increase in the amount of Fe₂P reduces the overall capacity, frequency-dependent Warburg impedance analyses show that all samples calcined at temperatures ≥700 °C have an order of magnitude higher Li⁺ diffusion coefficient (～1.3?×?10^?13 cm² s^?1) compared to the one calcined at 600 °C, as well as the values reported in literature. This work suggests that controlling the reduction environment and the temperature during the synthesis process can be used to optimize the amount of conducting Fe₂P for obtaining the best capacity for the high power batteries.     

Layered LiNi<Subscript>0.80</Subscript>Co<Subscript>0.15</Subscript>Al<Subscript>0.05</Subscript>O<Subscript>2</Subscript> as cathode material for hybrid Li<Superscript>+</Superscript>/Na<Superscript>+</Superscript> batteries

LiNi_0.80Co_0.15Al_0.05O₂ (NCA) is explored to be applied in a hybrid Li⁺/Na⁺ battery for the first time. The cell is constructed with NCA as the positive electrode, sodium metal as the negative electrode, and 1 M NaClO₄ solution as the electrolyte. It is found that during electrochemical cycling both Na⁺ and Li⁺ ions are reversibly intercalated into/de-intercalated from NCA crystal lattice. The detailed electrochemical process is systematically investigated by inductively coupled plasma-optical emission spectrometry, ex situ X-ray diffraction, scanning electron microscopy, cyclic voltammetry, galvanostatic cycling, and electrochemical impedance spectroscopy. The NCA cathode can deliver initially a high capacity up to 174 mAh g^?1 and 95% coulombic efficiency under 0.1 C (1 C?=?120 mA g^?1) current rate between 1.5–4.1 V. It also shows excellent rate capability that reaches 92 mAh g^?1 at 10 C. Furthermore, this hybrid battery displays superior long-term cycle life with a capacity retention of 81% after 300 cycles in the voltage range from 2.0 to 4.0 V, offering a promising application in energy storage.     

Low-temperature heat capacity of sodium erbium molybdophosphate Na<Subscript>2</Subscript>Er(MoO<Subscript>4</Subscript>)(PO<Subscript>4</Subscript>)

Adiabatic calorimetry is used to measure the low-temperature heat capacity of Na₂Er(MoO₄)(PO₄)from 6.41 to 347.87 K. Experimental data are used to calculate the thermodynamic functions of Na₂Er(MoO₄)(PO₄), which at 298.15 K are as follows: C _p ⁰ (298.15 K) = 243,3 ± 0.4 J/(K mol), S ⁰(298.15 K) = 312.8 ± 0.8 J/(K mol), H ⁰(298.15 K) ? H ⁰(0 K) = 45280 ± 90 J/mol, and Φ⁰(298.15 K) = 136.1 ± 0.3 J/(K mol). A diffuse heat-capacity anomaly associated with splitting of the Stark levels (Schottky anomaly) is discovered in the low-temperature region.     

Electrospun Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript>/Li<Subscript>2</Subscript>TiO<Subscript>3</Subscript> composite nanofibers for enhanced high-rate lithium ion batteries

Li₄Ti₅O₁₂/Li₂TiO₃ composite nanofibers with the mean diameter of ca. 60 nm have been synthesized via facile electrospinning. When the molar ratio of Li to Ti is 4.8:5, the Li₄Ti₅O₁₂/Li₂TiO₃ composite nanofibers exhibit initial discharge capacity of 216.07 mAh g^?1 at 0.1 C, rate capability of 151 mAh g^?1 after being cycled at 20 C, and cycling stability of 122.93 mAh g^?1 after 1000 cycles at 20 C. Compared with pure Li₄Ti₅O₁₂ nanofibers and Li₂TiO₃ nanofibers, Li₄Ti₅O₁₂/Li₂TiO₃ composite nanofibers show better performance when used as anode materials for lithium ion batteries. The enhanced electrochemical performances are explained by the incorporation of appropriate Li₂TiO₃ which could strengthen the structure stability of the hosted materials and has fast Li⁺-conductor characteristics, and the nanostructure of nanofibers which could offer high specific area between the active materials and electrolyte and shorten diffusion paths for ionic transport and electronic conduction. Our new findings provide an effective synthetic way to produce high-performance Li₄Ti₅O₁₂ anodes for lithium rechargeable batteries.     

Thermal analysis on C<Subscript>6</Subscript>H<Subscript>10</Subscript>Ge<Subscript>2</Subscript>O<Subscript>7</Subscript>-doped MgB<Subscript>2</Subscript>

Additives to MgB₂ can improve the superconducting functional characteristics, such as critical current density (J _c) and irreversibility field (H _irr). Recently, we have shown that repagermanium (C₆H₁₀Ge₂O₇) is an effective additive, enhancing both J _c and H _irr. To look into details of the processes taking place during the reactive sintering, a thermal analysis study (0.167 K s^?1, in Ar) is reported. We used differential scanning calorimetry between 298 and 863 K and simultaneous thermogravimetric—differential thermal analysis between 298 and 1233 K. Samples were mixtures of powders with composition 97 mol% MgB₂ and 3 mol% C₆H₁₀Ge₂O₇. Up to 863 K, repagermanium decomposes by multiple steps and forms amorphous phases. A reaction with MgB₂ is not observed. Above this temperature, partial decomposition of MgB₂ occurs. Crystalline Ge and MgO are detected before formation of Mg₂Ge and MgB₄, when temperature approaches the melting point of Ge (1211 K). Carbon substitution for boron in the crystal lattice of MgB₂ is observed for samples heated above 863 K. The amount of substitutional C does not significantly change with temperature.     

Facile synthesis of Fe@Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> core-shell nanowires as O<Subscript>2</Subscript> electrode for high-energy Li-O<Subscript>2</Subscript> batteries

Fe@Fe₂O₃ core-shell nanowires were synthesized via the reduction of Fe³⁺ ions by sodium borohydride in an aqueous solution with a subsequent heat treatment to form Fe₂O₃ shell and employed as a cathode catalyst for non aqueous Li-air batteries. The synthesized core-shell nanowires with an average diameter of 50–100 nm manifest superior catalytic activity for oxygen evolution reaction (OER) in Li-O₂ batteries with the charge voltage plateau reduced to ～3.8 V. An outstanding performance of cycling stability was also achieved with a cutoff specific capacity of 1000 milliampere hour per gram over 40 cycles at a current density of 100 mA g^?1. The excellent electrochemical properties of Fe@Fe₂O₃ as an O₂ electrode are ascribed to the high surface area of the nanowires’ structure and high electron conductivity. This study indicates that the resulting iron-containing nanostructures are promising catalyst in Li-O₂ batteries.     

Nanofibers of V<Subscript>2</Subscript>O<Subscript>5</Subscript>/C@MWCNTs as the cathode material for lithium-ion batteries

Vanadium pentoxide (V₂O₅) nanofibers (NFs) with a thin carbon layer of 3–5 nm, which wrapped on V₂O₅ nanoparticles, and integrated multiwalled carbon nanotubes (MWCNTs) have been fabricated via simple electrospinning followed by carbonization process and post-sintering treatment. The obtained composite displays a NF structure with V₂O₅ nanoparticles connected to each other, and good electrochemical performance: delivering initial capacity of 320 mAh g^?1 (between 2.0 and 4.0 V vs. Li/Li⁺), good cycling stability (223 mAh g^?1 after 50 cycles), and good rate performance (~?150 mAh g^?1 at 2 A g^?1). This can attribute to the carbon wrapped on the V₂O₅ nanoparticles which can not only enhance the electric conductivity to decrease the impendence of the cathode materials but also maintain the structural stability to protect the nanostructure from the corruption of electrolyte and the strain stress due to the Li-ion intercalation/deintercalation during the charge/discharge process. And, the added MWCNTs play the role of framework of the unique V₂O₅ coated by carbon layer and composited with MWCNT NFs (V₂O₅/C@MWCNT NFs) to ensure the material is more stable.     

Green fabrication of sandwich-like and dodecahedral C@Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@C as high-performance anode for lithium-ion batteries

Sandwich-structured C@Fe₃O₄@C hybrids with Fe₃O₄ nanoparticles sandwiched between two conductive carbon layers have attracted more and more attention owing to enhanced synergistic effects for lithium-ion storage. In this work, an environment-friendly procedure is developed for the fabrication of sandwich-like C@Fe₃O₄@C dodecahedrons. Zeolitic imidazolate framework (ZIF-8)-derived carbon dodecahedrons (ZIF-C) are used as the carbon matrix, on which iron precursors are homogeneously grown with the assistance of a polyelectrolyte layer. The subsequent polydopamine (PDA) coating and calcination give rise to the formation of sandwiched ZIF-C@Fe₃O₄@C. When being evaluated as the anode material for lithium-ion batteries, the obtained hybrid manifests a high reversible capacity (1194 mAh g^?1 at 0.05 A g^?1), good high-rate behavior (796 mAh g^?1 at 10 A g^?1), and negligible capacity loss after 120 cycles.     

Facile synthesis of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> microsheets with porous micro-nanostructure as high-rate cathode materials for Li-ion batteries

Porous LiMn₂O₄ microsheets with micro-nanostructure have been successfully prepared through a simple carbon gel-combustion process with a microporous membrane as hard template. The crystal structure, morphology, chemical composition, and surface analysis of the as-obtained LiMn₂O₄ microsheets are characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscope (XPS). It can be found that the as-prepared LiMn₂O₄ sample presents the two-dimensional (2-D) sheet structure with porous structure comprised with nano-scaled particles. As cathode materials for lithium-ion batteries, the obtained LiMn₂O₄ microsheets show superior rate capacities and cycling performance at various charge/discharge rates. The LiMn₂O₄ microsheets exhibit a higher charge and discharge capacity of 137.0 and 134.7 mAh g^?1 in the first cycle at 0.5 C, and it remains 127.6 mAh g^?1 after 50 cycles, which accounts for 94.7% discharge capacity retention. Even at 10 C rate, the electrode also delivers the discharge capacity of 91.0 mAh g^?1 after 300 cycles (93.5% capacity retention). The superior electrochemical properties of the LiMn₂O₄ microsheets could be attributed to the unique microsheets with porous micro-nanostructure, more active sites of the Li-ions insertion/deinsertion for the higher contact area between the LiMn₂O₄ nano-scaled particles and the electrolyte, and better kinetic properties, suggesting the applications of the sample in high-power lithium-ion batteries.     

Low-temperature heat capacity and high-temperature thermal behavior of sodium lutetium molybdate phosphate Na<Subscript>2</Subscript>Lu(MoO<Subscript>4</Subscript>)(PO<Subscript>4</Subscript>)

The low-temperature heat capacity of Na₂Lu (MoO₄)(PO₄) was measured by adiabatic calorimetry in the range of 7.47–345.74 K. The experimental data were used to calculate the thermodynamic functions of Na₂Lu (MoO₄)(PO₄). At 298.15 K, the following values were obtained: C _p ⁰ (298.15 K) = 237.7 ± 0.1 J/(K mol), S ⁰(298.15 K) = 278.1 ± 0.8 J/(K mol), H ⁰(298.15 K) ? H ⁰ (0 K) = 42330 ± 20 J/mol, and Φ⁰(298.15 K) = 136.1 ± 0. 3 J/(K mol). A heat capacity anomaly was found in the range of 10-67 K with a maximum at T _tr = 39.18 K. The entropy and enthalpy of transition are ΔS = 12.39 ± 0.75 J/(K mol) and ΔH = 403 ± 16 J/mol. The thermal investigation of sodium lutetium molybdate phosphate in the high-temperature range (623–1223 K) was performed using differential scanning calorimetry. It was found that during melting in the range of 1030–1200 K, Na₂Lu(MoO₄)(PO₄) degrades to simpler compounds; the degradation scenario is verified by X-ray powder diffraction.     

Sn-doped Li<Subscript>1.2</Subscript>Mn<Subscript>0.54</Subscript>Ni<Subscript>0.13</Subscript>Co<Subscript>0.13</Subscript>O<Subscript>2</Subscript> cathode materials for lithium-ion batteries with enhanced electrochemical performance

Sn-doped Li-rich layered oxides of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ have been synthesized via a sol-gel method, and their microstructure and electrochemical performance have been studied. The addition of Sn⁴⁺ ions has no distinct influence on the crystal structure of the materials. After doped with an appropriate amount of Sn⁴⁺, the electrochemical performance of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ cathode materials is significantly enhanced. The optimal electrochemical performance is obtained at x = 0.01. The Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode delivers a high initial discharge capacity of 268.9 mAh g^?1 with an initial coulombic efficiency of 76.5% and a reversible capacity of 199.8 mAh g^?1 at 0.1 C with capacity retention of 75.2% after 100 cycles. In addition, the Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode exhibits the superior rate capability with discharge capacities of 239.8, 198.6, 164.4, 133.4, and 88.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively, which are much higher than those of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ (196.2, 153.5, 117.5, 92.7, and 43.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively). The substitution of Sn⁴⁺ for Mn⁴⁺ enlarges the Li⁺ diffusion channels due to its larger ionic radius compared to Mn⁴⁺ and enhances the structural stability of Li-rich oxides, leading to the improved electrochemical performance in the Sn-doped Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ cathode materials.     

Enhanced electrochemical properties of Li<Subscript>2</Subscript>ZnTi<Subscript>3</Subscript>O<Subscript>8</Subscript>/C nanocomposite synthesized with phenolic resin as carbon source

Li₂ZnTi₃O₈/C nanocomposite has been synthesized using phenolic resin as carbon source in this work. The structure, morphology, and electrochemical properties of the as-prepared Li₂ZnTi₃O₈ samples were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), Raman spectroscopy (RS), galvanostatic charge–discharge, and AC impedance spectroscopy. SEM images show that Li₂ZnTi₃O₈/C was agglomerated with a primary particle size of ca. 40 nm. TEM images reveal that a homogeneous carbon layer (ca. 5 nm) formed on the surface of Li₂ZnTi₃O₈ particles which is favorable to improve the electronic conductivity and inhibit the growth of Li₂ZnTi₃O₈ during annealing process. The as-prepared Li₂ZnTi₃O₈/C composite with 6.0 wt.% carbon exhibited a high initial discharge capacity of 425 and 159 mAh g^?1 at 0.05 and 5 A g^?1, respectively. At a high current density of 1 A g^?1, 95.5 % of its initial value is obtained after 100 cycles.     

Photo-fenton refreshable Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@HCS adsorbent for the elimination of tetracycline hydrochloride

A yolk–shell-structured sphere composed of a superparamagnetic Fe₃O₄ core and a carbon shell (Fe₃O₄@HCS) was etched from Fe₃O₄@SiO₂@carbon by NaOH, which was synthesized through the layer-by-layer coating of Fe₃O₄. This yolk–shell composite has a shell thickness of ca. 27 nm and a high specific surface area of 213.2 m² g^?1. Its performance for the magnetic removal of tetracycline hydrochloride from water was systematically examined. A high equilibrium adsorption capacity of ca. 49.0 mg g^?1 was determined. Moreover, the adsorbent can be regenerated within 10 min through a photo-Fenton reaction. A stable adsorption capacity of 44.3 mg g^?1 with a fluctuation <10% is preserved after 5 consecutive adsorption–degradation cycles, demonstrating its promising application potential in the decontamination of sewage water polluted by antibiotics.     

Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/rice husk-based maco-/mesoporous carbon bone nanocomposite as superior high-rate anode for lithium ion battery

Rice husks (RHs), a kind of biowastes, are firstly hydrothermally pretreated by HCl aqueous solution to achieve promising macropores, facilitating subsequently impregnating ferric nitrate and urea aqueous solution, the precursor of Fe₃O₄ nanoparticles. A Fe₃O₄/rice husk-based maco-/mesoporous carbon bone nanocomposite is finally prepared by the high-temperature hydrothermal treatment of the precursor-impregnated pretreated RHs at 600 °C followed by NaOH aqueous solution treatment for dissolving silica and producing mesopores. The macro-/mesopores are able to provide rapid lithium ion-transferring channels and accommodate the volumetric changes of Fe₃O₄ nanoparticles during cycling as well. Besides, the macro-/mesoporous carbon bone can offer rapid electron-transferring channels through directly fluxing electrons between Fe₃O₄ nanoparticles and carbon bone. As a result, this nanocomposite delivers a high initial reversible capacity of 918 mAh g^?1 at 0.2 A g^?1 and a reversible capacity of 681 mAh g^?1 remained after 200 cycles at 1.0 A g^?1. The reversible capacities at high current densities of 5.0 and 10.0 A g^?1 still remain at high values of 463 and 221 mAh g^?1, respectively.     

Co-precipitation spray-drying synthesis and electrochemical performance of stabilized LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> cathode materials

In this paper, the LiNi_0.5Mn_1.5O₄ cathode materials of lithium-ion batteries are synthesized by a co-precipitation spray-drying and calcining process. The use of a spray-drying process to form particles, followed by a calcination treatment at the optimized temperature of 750 °C to produce spherical LiNi_0.5Mn_1.5O₄ particles with a cubic crystal structure, a specific surface area of 60.1 m² g^?1, a tap density of 1.15 g mL^?1, and a specific capacity of 132.9 mAh g^?1 at 0.1 C. The carbon nanofragment (CNF) additives, introduced into the spheres during the co-precipitation spray-drying period, greatly enhance the rate performance and cycling stability of LiNi_0.5Mn_1.5O₄. The sample with 1.0 wt.% CNF calcined at 750 °C exhibits a maximum capacity of 131.7 mAh g^?1 at 0.5 C and a capacity retention of 98.9% after 100 cycles. In addition, compared to the LiNi_0.5Mn_1.5O₄ material without CNF, the LiNi_0.5Mn_1.5O₄ with CNF demonstrates a high-rate capacity retention that increases from 69.1% to 95.2% after 100 cycles at 10 C, indicating an excellent rate capability. The usage of CNF and the synthetic method provide a promising choice for the synthesis of a stabilized LiNi_0.5Mn_1.5O₄ cathode material.

Open image in new window

Graphical Abstract Micro/nanostructured LiNi_0.5Mn_0.5O₄ cathode materials with enhanced electrochemical performances for high voltage lithium-ion batteries are synthesized by a co-precipitation spray-drying and calcining routine and using carbon nanofragments (CNFs) as additive.

     

Equilibrium isotherms and isosteric heat for CO<Subscript>2</Subscript> adsorption on nanoporous carbons from polymers

Four nanoporous carbons obtained from different polymers: polypyrrole, polyvinylidene fluoride, sulfonated styrene–divinylbenzene resin, and phenol–formaldehyde resin, were investigated as potential adsorbents for carbon dioxide. CO₂ adsorption isotherms measured at eight temperatures between 0 and 60 °C were used to study adsorption properties of these polymer-derived carbons, especially CO₂ uptakes at ambient pressure and different temperatures, working capacity, and isosteric heat of adsorption. The specific surface areas and the volumes of micropores and ultramicropores estimated for these materials by using the density functional theory-based software for pore size analysis ranged from 840 to 1990 m² g^?1, from 0.22 to 1.47 cm³ g^?1, and from 0.18 to 0.64 cm³ g^?1, respectively. The observed differences in the nanoporosity of these carbons had a pronounced effect on the CO₂ adsorption properties. The highest CO₂ uptakes, 6.92 mmol g^?1 (0 °C, 1 atm) and 1.89 mmol g^?1 (60 °C, 1 atm), were obtained for the polypyrrole-derived activated carbon prepared through a single carbonization-KOH activation step. The working capacity for this adsorbent was estimated to be 3.70 mmol g^?1. Depending on the adsorbent, the CO₂ isosteric heats of adsorption varied from 32.9 to 16.3 kJ mol^?1 in 0–2.5 mmol g^?1 range. Overall, the carbons studied showed well-developed microporosity and exceptional CO₂ adsorption, which make them viable candidates for CO₂ capture, and for other adsorption and environmental-related applications.