孔道有序排列高容量S@C复合电极材料的制备及电化学性能

用氨水对木材进行预处理, 去除其中的木质素, 再经过高温碳化和活化处理, 得到孔道有序排列的多级孔径三维碳材料, 于150 ℃下熔融吸附硫, 得到高容量 S@C复合电极材料. 扫描电子显微镜(SEM)、 X射线衍射(XRD)、 拉曼光谱及表面吸附实验等测试结果表明, 该碳材料呈现各向异性多级孔径的三维结构, 孔道与树干生长方向平行有序排列; 经过KOH活化后的碳材料孔道内壁上出现较多微孔, 从而具有较大的孔容和比表面积. 以S@C复合材料作正极组装了锂/硫电池, 电化学性能测试结果表明, 电池首次放电比容量达1595 mA·h/g, 接近于硫电极材料的理论比容量1670 mA·h/g.     

钛硅沸石分子筛TiMCM-41的微波合成与表征

ＭＣＭ４１分子筛是一类以表面活性剂季铵碱或季铵盐为模板剂,液晶模板机理合成,孔道六方有序排列,孔径大小可在１６～１０ｎｍ范围内调节的新颖中孔硅铝分子筛材料．在多相催化、离子交换、吸附分离以及高等无机材料等领域具有较高的工程应用与学术研究价值［１］...     

中孔分子筛MCM-41形成机理的考察

MCM－41分子筛是九十年代初期美国Mobil公司开发的一种新型中孔（mesoporous）材料[1]．它以C8－C16季俊碱表面活性剂作为模板剂水热法合成，具有2－10nm的孔径，孔道六方有序排列，高比表面和高吸附容量，中等酸性和稳定性，是一种有潜在应用前景的吸附和催化材料．目前，关于     

MCM-41介孔分子筛掺杂的微孔型聚合物电解质的制备与表征

以介孔分子筛MCM-41作填料,丙酮与二甲基甲酰胺混合液为溶剂,用直接造孔成膜的方法制备了微孔型聚合物电解质膜．该法避免使用造孔增塑剂,既简化了制膜工序,又减少电池中副反应的发生,使电池性能得以提高．MCM-41分子筛具有六方有序排列的单一柱状孔道结构和纳米级的粒子尺度,其骨架结构单元与一般聚合物电解质常用的纳米SiO2填料具有相同的化学成分,该分子筛堆积时形成的表面空隙及其独有的一维介孔孔道对聚合物电解质微孔的形成与连通、电导率的提高都具有重要作用,是一种极具实用价值的新型无机填料．     

竹炭模板合成高度有序二氧化硅微米线组

通过扫描电子显微镜(SEM)系统地研究了竹炭的微观结构，并以竹炭孔道为模板，以正硅酸乙酯为硅源，采用溶胶-凝胶法合成出高度有序的二氧化硅微米线组，其形貌和组成分别通过SEM，EDX和XRD进行表征．结果表明，所得微米线为较纯的方石英晶型，直径约1～2μm．长达200μm以上，呈束状高度有序排列，其形貌高度复制了竹炭微孔孔道的结构，说明微孔在限域反应中起模板作用。     

毛细压力法组装纳米聚合物微球的二维有序排列

通过半连续乳液聚合的方法获得了单分散性好,数均粒径为７０６９ｎｍ的苯乙烯,丙烯酸丁酯和丙烯酸（Ｓｔ／ＢＡ／ＡＡ）高分子微球,并通过毛细压力法,成功地在玻璃基体上组装成了紧密的二维有序排列点阵结构．点阵结构的形成过程可分为成核和增长两个阶段．在二维有序排列形成过程中,微粒之间的相互排斥作用可通过添加一定浓度的电解质来进行调节．组装后的二维有序排列用扫描电镜进行了观察．     

非离子型表面活性剂在SiO2凝胶中的造孔作用

以非离子型表面活性剂C13EO9(或简写为AEO9)为模板剂,在强酸性的乙醇-水体系中通过溶胶-凝胶途径合成SiO2分子筛。结果表明,经焙烧去除模板剂以后的分子筛具有双孔分布的特征,孔径主要集中在2.56nm和13.95nm。经高分辨电镜(HRTEM)和X射线衍射(XRD)测试分析,前者呈有序排列,类似于MSU系列分子筛的孔道结构,而后者则呈无序的排列,它是由胶体粒子聚集而形成的颗粒间孔,并与在相同条件下不加AEO9制备的无定形SiO2凝胶以及用离子型表面活性剂十六烷基三甲基溴化铵(CTAB)代替AEO9为模板剂制备的分子筛进行了比较,二者的孔道结构分别呈无序排列和六方有序排列的单一孔分布特征。     

非离子型表面活性剂在SiO2凝胶中的造孔作用

以非离子型表面活性剂C13EO9(或简写为AEO9)为模板剂,在强酸性的乙醇-水体系中通过溶胶-凝胶途径合成SiO2分子筛.结果表明,经焙烧去除模板剂以后的分子筛具有双孔分布的特征,孔径主要集中在2.56 nm和13.95 nm.经高分辨电镜(HRTEM)和X射线衍射(XRD)测试分析,前者呈有序排列,类似于MSU系列分子筛的孔道结构,而后者则呈无序的排列,它是由胶体粒子聚集而形成的颗粒间孔.并与在相同条件下不加AEO9制备的无定形SiO2凝胶以及用离子型表面活性剂十六烷基三甲基溴化铵(CTAB)代替AEO9为模板剂制备的分子筛进行了比较,二者的孔道结构分别呈无序排列和六方有序排列的单一孔分布特征.     

有机官能化MSU-x孔分子筛的界面特征

MSU- x是自 M41S系列介孔分子筛问世以来所合成的另一类新型介孔分子筛材料 ,它具有三维立体交叉排列的 " worm- like"孔道结构特征及采用中性模板剂、廉价无毒等诸多合成优点 [1～ 4],有着潜在的应用价值 .为了改善纯硅的介孔材料的表面和孔道性质 ,扩大其应用领域 ,除了在骨架引入金属离子或在其孔道中负载催化活性物质外 ,对介孔材料进行有机官能化制备无机-有机杂化材料改善其骨架和孔道性质是当前研究的热点之一 [5].正是由于活性有机基团的存在 ,使得这些材料可直接用于催化反应 ,或作为中间介质成为其它络合离子的主体 .由于有机基…     

水和醇类分子及其混合物在纳米孔道材料中的传输扩散

随着计算机科学技术的飞速发展,理论计算特别是分子动力学模拟技术在研究受限流体的性质时发挥着独特的作用。本文综述了近年来水和醇类分子及其混合物在纳米孔道材料中传输扩散的研究进展,包括单组分水、甲醇和乙醇等在多种纳米孔道材料中的传输扩散,以及甲醇/水和乙醇/水等混合物在碳纳米管和沸石膜中的吸附和分离,讨论了体系温度、分子浓度以及纳米孔道材料结构等因素对水和醇类分子传输扩散过程的影响。     

Dual fluorescence of graphene oxide: a time-resolved study

The fluorescence properties of graphene oxide (GO) was studied by recording the fluorescence lifetime, fluorescence emission, and excitation spectra, as well as UV-visible and near-IR absorption spectra. For the first time, we showed that a blue band (ca. 440 nm) and a long wavelength (LW) band (ca. 700 nm) are coexistent, which can be recorded simultaneously by controlling concentration, excitation wavelength, and pH values. Two bands are closely related by the protonation or deprotonation of GO. The blue band is favored by low GO concentration, short excitation wavelength, and high pH value, while the LW band is favored by low pH and long excitation wavelength. To reveal the nature of the dual emission of GO, the fluorescence lifetimes under various conditions were also measured. The blue band contains three emitting components; one of them has a lifetime as long as 10 ns, and its emitting intensity is fairly sensitive to pH, showing the potential for applications in sensing H(+) and fluorescence lifetime imaging. Combining the results under various conditions, we conclude that the electronic transition for this component is very likely due to n-π* transition. The LW band contains two main emitting components (0.2 and 2.1 ns) that also appear in the blue band as minor contributors; the related emission is assigned to π-π* transition. In summary, GO emission is of broadband (300-1250 nm), long-lived, pH sensitive, and excitation wavelength dependent. This makes it easily tailored for versatile applications.     

铝修饰改性对SBA-15分子筛性质及催化剂性能的影响

分别采用调变pH值合成法和后处理嫁接法制备了铝修饰改性的SBA-15分子筛,通过XRD、Al核磁、N₂吸附脱附、NH₃-TPD等方法对改性分子筛的理化性质进行了分析表征,考察了不同的Al修饰改性方法对分子筛性质和加氢裂化催化剂性能的影响。结果表明,调变pH值合成法能够有效地对SBA-15进行Al改性,得到的Al-SBA-15分子筛具有高度有序的六方孔道结构,较好的水热稳定性。Al的引入提高了SBA-15的表面酸性,并使其在加氢裂化反应中表现出较好的中油选择性。     

界面微环境中双亲卟啉的光谱研究

用敏感于微环境变化的UV-Vis光谱,研究了在SDS胶束微环境中,双亲原卟啉P1对体相pH值的依赖关系。体相pH值由弱碱性到强酸性改变的过程中,P1在SDS胶束内存在明显等色点,为一典型的双组分平衡,同时其质子化峰吸收强度逐渐增强,表明P1在胶束内发生了质子化;体相pH值从弱碱到强碱变化时,P1的Soret带红移,吸光度变小,半峰宽加大,这是卟啉从SDS胶束内核转移到胶束表面的结果,由此证明改变pH值可以实现卟啉跨膜转移的控制。     

Electrochemistry and Electrocatalysis with Myoglobin in Biomembrane-Like DHP-PDDA Polyelectrolyte-Surfactant Complex Films

The polyelectrolyte-surfactant complex DHP-PDDA was prepared by reacting the anionic surfactant dihexadecylphosphate (DHP) with polycationic poly(diallyldimethylammonium) (PDDA). Thin films made from DHP-PDDA on solid substrates demonstrated an ordered multibilayer structure by XRD and DSC. Incorporated myoglobin (Mb) in DHP-PDDA films on pyrolytic graphite (PG) electrodes showed a pair of well-defined and nearly reversible cyclic voltammetric peaks for the Mb Fe(III)/Fe(II) couple at about -0.3 V vs SCE in pH 7.0 buffers. Electron transfer between Mb and PG electrodes was greatly facilitated in the film microenvironment. The positions of the Soret absorption band suggest that Mb maintains its secondary structure similar to its native state in DHP-PDDA films in the medium pH range. Mb could act as an enzyme-like catalyst in DHP-PDDA films as demonstrated by catalytic reduction of trichloroacetic acid, nitrite, and oxygen with a decrease in the electrode potentials required. Mb-DHP-PDDA films may thus have potential application as biosensors. Copyright 2001 Academic Press.     

Effect of pH on colloidal properties of native ovalbumin aqueous systems

The effect of pH on the molecular shape and dispersed state of native ovalbumin molecules in 20 mM phosphate and acetic acid buffer solutions has been studied using small-angle x-ray scattering (SAXS) and a rheological method The degree of association of the OA molecule at the 0.5% colloid system increases slightly with decreasing pH, i.e., 2.10 at pH 7.0, and 2.88 at pH 4.0, and the radius of the OA molecule decreases slightly with decreasing pH, i.e., 24.5 Å at pH 7.0, and 22.0 Å at pH 4.0.The OA colloid shows apparent yield stress and rigidity which are due to a certain ordered arrangement of the molecules. The yield stress and the rigidity increase abruptly at a pH value near to an isoelectric point (ca. pH 4.4). In the dilute system this increment is attributed to the change in the ordered arrangement or in the interparticle interaction, and not to the change in the association state of the OA molecules. The values of the yield stress and the rigidity remain almost constant over a wide concentration range and this feature (an auto-controlled mechanism) is kept over a certain range of pH.     

芘荧光探针法研究海藻酸钠与SDS的作用

采用芘荧光法研究了海藻酸钠(NaAlg)与十二烷基硫酸钠(SDS)在不同pH水溶液中的相互作用.以芘单体的荧光光谱第一峰与第三峰的荧光强度之比(I1/I3)及激基缔合物与单体荧光强度之比(IE/IM)来探测芘分子所处环境的极性.结果表明:NaAlg水溶液随pH值降低,出现了聚合物的疏水微区;pH从7降到5,NaAlg类似简单盐,对SDS的临界胶束浓度(CMC)有明显的影响;在pH 3时,海藻酸主链上有足够的疏水片段,使得SDS与海藻酸通过疏水性作用而聚集.NaCl对NaAlg /SDS体系的影响亦较明显.     

晶面可控BiOCl光催化剂的制备及其催化反应活性研究

以五水合硝酸铋和氯化钾为原料,通过水热法合成了BiOCl光催化剂,并对其结构进行表征,考察了前驱体的pH对催化剂结构和降解8-羟基喹啉活性的影响。结果表明,随前驱体pH的增加,催化剂[001]晶面暴露程度下降,带隙能减小,且催化反应活性降低,这可归因于低的带隙能和高的光生载流子复合效率。进一步考察降解体系pH对催化剂反应活性的影响,结果表明,降解体系pH影响8-羟基喹啉在催化剂表面的吸附行为,进而影响催化剂的反应活性。     

Spectroscopy Investigation on Conformational Transition of Tea Glycoconjugate from Green Tea

The conformational transition of a new glycoconjugate, tea glycoconjugate (TGC), was investigated by spectroscopy techniques including circular dichroism (CD) and ultraviolet (UV) spectroscopy. The solution behaviors of TGC in the mediums of different temperature, pH value, and ions were compared. Results showed that the native conformation of TGC was partially ordered. The CD value and UV absorbance of TGC altered with the change of pH value, temperature, the addition of ions, and also accompanied order-disorder transition. Especially the conditions with temperature higher than the glass transition temperature (Tg=62℃), higher pH value or lower pH value will have the most impact on the conformation of TGC, which will destroy the hydrogen bonds between the TGC molecules. The results indicated that the outside factors play important roles on the stability of the conformation of TGC.     

含铜有序介孔Cu-KIT-6的合成及其苯乙烯环氧化催化性能:pH值的影响

苯乙烯侧链C=C的选择性氧化一直是烯烃环氧化研究领域关注的热点之一.近几十年来,苯乙烯环氧化研究主要集中于多相过渡金属催化剂的开发与应用;以铜为主要活性物种的催化剂因具有较高的环氧苯乙烷选择性而备受瞩目.然而,采用pH调节法将铜离子引入三维六方介孔材料KIT-6阵列尚未见报道,尤其是pH值对合成材料的形貌、结构以及催化活性的影响尚未可知.基于此,本文采用pH调节法合成了铜嵌入KIT-6介孔材料Cu-KIT-6x(x代表初始溶胶的pH值,x=1.43,2.27,3.78,3.97,4.24,6.62),并将其应用于苯乙烯环氧化反应.采用X射线粉末衍射、氮气吸附脱附、透射电子显微镜以及X射线光电子能谱等手段对Cu-KIT-6x的表面结构及形貌进行了细致表征.结果表明,随着pH的变化,Cu-KIT-6x催化剂的物理特性、表面结构尤其是铜物种种类和含量均变化较大.较低的pH导致铜物种主要以Cu2+形式存在,难以引入到KIT-6骨架中,且不利于介孔材料的合成,最终导致产生无序介孔结构.当pH增大到3.78时,约有4.6 wt%的Cu(II)以?Cu?O?Si?形式成功引入KIT-6骨架中,获得了具有较高比表面积且有序的孔结构.此外,由于Cu2+的引入,骨架内部分Si4+被取代,促使Cu-KIT-63.78拥有可与载体KIT-6相媲美的大孔径.然而,当pH继续增大时,过量的Cu2+从KIT-6骨架中析出,以CuO形式存在于载体表面,从而导致Cu-KIT-6的孔径逐渐增大;同时NaOH对三维立方介孔结构的破坏,使得介孔结构坍塌及比表面积显著降低.以苯乙烯环氧化反应评价了Cu-KIT-6x系列催化剂的催化活性.当以叔丁基过氧化氢为氧化剂,乙腈为溶剂,在70 oC反应6 h后,Cu-KIT-63.78表现出最优的苯乙烯转化率(43.5%)及环氧苯乙烷选择性(86.6%).使用4次后,Cu-KIT-63.78展示了稳定的苯乙烯转化率、环氧苯乙烷选择性及有序的孔结构,充分表明其具有出色的稳定性.各表征结果揭示了在适宜pH下合成的Cu-KIT-63.78催化剂具有较高的铜含量、有序的立方Ia3d介孔结构及合适的结构参数,因而在苯乙烯环氧化反应中表现优异活性和良好稳定性.     

On the 3-dimensional effects in etched chips for high performance liquid chromatography-separations

In an attempt to quantify the potential of photolithographically etched micro-pillar arrays as a perfectly ordered alternative for the packed bed of spheres, the additional band broadening originating from the top and bottom plate has been investigated using computational fluid dynamics simulations. These calculations provide insight in the theoretical expectations that can be made for the experimental work that is currently being conducted by a number of groups. The calculations show that the additional band broadening contribution can be expected to go through a transient regime as a function of the axial distance along the array. In its fully developed regime and in the most relevant velocity range, the top and bottom wall contribution almost doubles the band broadening compared to the band broadening in a perfectly ordered array of non-porous, non-retentive pillars without top and bottom wall. Compared to the band broadening in an array of porous, retentive pillars on the other hand, the top and bottom wall-effect can be expected to become negligible. A simplified, phenomenological model yielding a first principles prediction of both the transient and the steady-state top and bottom wall band broadening as a function of the inter-pillar distance and the pillar height is proposed and shows good qualitative agreement with the exact calculations.