PU/MOMMT纳米复合材料的制备与研究

纳米复合材料由于其纳米尺寸效应，表面效应以及纳米粒子与基体界面间强的相互作用，具有优于相同组分常规复合材料的力学、热学等性能，引起了人们的广泛关注。用纳米材料改性聚合物，制备纳米复合材料是获得高性能高分子复合材料的重要方法。1998年以来，Pinnavaia等首先制备了聚氨酯，蒙脱土（PU／MMT）纳米复合材料，研究了有机蒙脱土在聚醚中的分散性。其后Chen等将聚羟基己内酯/蒙脱土（PCL／MMT）纳米复合材料加入到PCL和二苯基甲烷-4，4＇-二异氰酸酯（MDI）合成的预聚体与1，4-丁二醇扩链反应后的溶液中，制备了PU／MMT纳米复合材料。少量PCL／MMT的引入可使复合材料的综合性能大幅提高。     

聚丙烯/蒙脱土纳米复合材料Ⅰ.制备、表征及动态力学性能

用原位接枝插层法成功地制备了聚丙烯 /蒙脱土纳米复合材料 (PPMNC) .采用X射线衍射研究复合材料中蒙脱土硅酸盐片层间距 ,发现硅酸盐片层间距从 1 94nm升至 4nm左右 .同时研究了PPMNC的动态力学性能 ,结果表明 :PPMNC的动态储能模量明显高于聚丙烯 (PP) ,尤其在T >Tg 高温段 ,甚至可以达到PP基体的 2倍     

双单体原位接枝插层法制备聚丙烯纳米复合材料的研究Ⅰ.制备、表征及力学性能的研究

用有机插层剂处理蒙脱土原土 ,制得有机蒙脱土 (O MMT) .采用双单体 (马来酸酐和苯乙烯 )原位接枝插层法 ,制备了聚丙烯 蒙脱土纳米复合材料母料 .将母料与聚丙烯基体在双螺杆上共混挤出 ,制得聚丙烯 蒙脱土纳米复合材料 (PP Montmorillonetenanocomposites,PMNC) .这是制备聚合物纳米复合材料的一种新方法 .通过X 射线衍射测试 (XRD)表明 ,有机蒙脱土片层 0 0 1面间距从原土的 1 4 9nm扩大到 2 96nm ,复合材料中蒙脱土片层 0 0 1面间距由有机蒙脱土的 2 96nm扩大到 4 0nm .力学性能测试表明 ,复合材料的力学性能明显优于PP基体 ,在提高材料拉伸强度的同时 ,缺口冲击强度也得到很大的提高 .用扫描电镜 (SEM)对材料的冲击断面形貌进行了研究 ,并从理论上分析了断裂机理 .随着蒙脱土含量的增加 ,冲击断裂形式逐渐从脆性断裂变成韧性断裂     

聚氨酯弹性体/蒙脱土纳米复合材料的合成与性能

采用聚氨酯本体预聚法 ,利用原位插层聚合合成了聚氨酯 蒙脱土纳米复合材料 .通过X 射线衍射(XRD)和Molau实验研究了蒙脱土在复合材料中的分散情况 .红外分析 (IR)表明随着蒙脱土含量的增加 ,复合材料羰基氢键减少 .动态力学分析 (DMA)以及差热分析 (DSC)结果说明随着蒙脱土含量的增加 ,材料的玻璃化温度降低 .聚氨酯纳米复合材料的拉伸强度和断裂伸长率同时提高 ,表现出较好的力学性能 .     

双功能催化体系制备聚丙烯/蒙脱土复合材料

为了制备聚丙烯/蒙脱土纳米复合材料,将Brookhart型的乙烯齐聚催化剂负载于有机蒙脱土片层间,进一步与丙烯聚合茂金属催化剂进行复配得到双功能催化体系。采用这种双功能催化剂体系通过催化乙烯齐聚得到α-烯烃/蒙脱土的齐聚产物,进一步将丙烯与这种齐聚产物共聚,合成了一系列结构不同的聚丙烯/蒙脱土纳米复合材料。通过气相色谱、X射线衍射(XRD)分析得出蒙脱土负载的铁系催化剂催化乙烯齐聚产物是以C_4~C_(16)为主的α-烯烃,蒙脱土以片层形式分散于齐聚产物的甲苯溶液中。研究了蒙脱土负载的铁系催化剂与共聚催化剂复配催化乙烯齐聚以及丙烯与齐聚产物共聚合的情况。通过XRD、透射电镜、差示量热分析、凝胶渗透色谱分析表征可知,蒙脱土以纳米片层剥离的形式均匀分散于聚丙烯基体中,聚丙烯/复合材料的结晶温度比纯聚丙烯有所下降,所得聚丙烯基体分子量在8.1×10~4~17.1×10~4g/mo L。     

sPS/PA6/蒙脱土纳米复合材料的制备与性能

讨论了间规聚苯乙烯 (sPS) 尼龙 6(PA6) 磺化间规聚苯乙烯 (SsPS H) 蒙脱土纳米复合材料的制备技术和新材料的结构与性能特征 .蒙脱土经层间改性处理后 (MTN) ,可分别将SsPS H和aPS(无规聚苯乙烯 )插入其纳米层间 ,制备出插层型纳米复合物MTN SsPS和MTN aPS .在sPS/PA6/SsPS H三组分共混体系中加入MTN SsPS或MTN aPS ,进行四组分熔融共混即可制备出sPS/PA6/SsPS H/蒙脱土纳米复合材料 .TEM测定证实了蒙脱土在基体中的层厚分布约为 5 0nm .此外 ,采用DSC、DMA、XRD及力学性能测试仪等现代分析方法对sPS/PA6/SsPS H/蒙脱土纳米复合材料的结构与性能进行了详细研究 .研究结果表明这种纳米复合材料具有优良的综合性能     

插层聚合制备聚丙烯/蒙脱土纳米复合材料及其结构性能表征

将插层聚合的概念引入烯烃聚合,制备了聚丙烯／蒙脱土（PP／MMT）纳米复合材料。X射线衍射和TEM分析结果表明,蒙脱土在聚丙烯基体中达到了纳米级的分散,动态力学性能研究结果表明,在高于Tg的温度区域内PP／MMT纳米复合材料的储能模量（E′）成倍增加,加入8％的蒙脱土（MMT）,PP／MMT的E′提高近3倍。PP／MMT的玻璃化转变温度Tg有一定程度的提高,随蒙脱土含量的增加,PP／MMT的热分解温度和热变形温度（HDT）都有大幅度提高。     

有机蒙脱土/天然橡胶纳米复合材料的阻燃性能研究

采用机械混炼插层法制备有机蒙脱土/天然橡胶(TMT/NR)纳米复合材料.使用X-射线衍射(XRD)和红外表征了有机蒙脱土的结构特性,并用锥形量热仪测试了纳米复合材料的燃烧性能.结果表明,有机蒙脱土/NR纳米复合材料的热释放速率(HRR)、生烟速率(SPR)等较纯天然橡胶、未改性蒙脱土/NR复合材料均所有降低,表现出较好的阻燃性能.通过对纳米复合材料的燃烧性能和燃烧残余物分析,探讨了该体系的阻燃机理.     

熔体插层制备尼龙6/蒙脱土纳米复合材料的性能表征

通过熔体插层成功地制备了尼龙６／蒙脱土纳米复合材料，测试了力学性能、耐热性能和耐溶剂性．通过ＴＥＭ、ＷＡＸＤ、ＤＳＣ等手段，研究了结构与结晶行为，并与插层聚合的尼龙６／蒙脱土纳米复合材料进行了对比．实验表明通过熔体插层可使尼龙６基体插层于蒙脱土中，所得到的复合物的性能较尼龙６有很大提高，且与插层聚合的尼龙６／蒙脱土纳米复合材料的性能相当．     

丙烯酸树脂／蒙脱土纳米复合材料的制备研究

采用离子交换法,用十六烷基三甲基溴化铵对钠基蒙脱土(Na-MMT)进行改性制备了有机蒙脱土(OMMT).用丙烯酸(AA)、硫酸化蓖麻油、乳化剂OP-10、过硫酸钾为原料进行水溶液聚合制得丙烯酸树脂.将丙烯酸树脂与改性蒙脱土通过聚合插层制备了丙烯酸树脂/ 蒙脱土纳米复合材料.通过傅立叶变换红外(FTIR)和X-射线衍射 (XRD)等手段对复合材料的结构进行了表征,结果表明:丙烯酸树脂插层进入有机蒙脱土内可形成插层型或剥离型的纳米复合材料.蒙脱土含量及蒙脱土与丙烯酸树脂的反应温度、反应时间均对复合材料的剥离行为产生影响,在蒙脱土含量为树脂固含量的7%、温度为70℃、反应4h的条件下可得到完全剥离的纳米复合材料.     

Tribological performance and thermal behavior of epoxy resin nanocomposites containing polyurethane and organoclay

A series of epoxy resin nanocomposites modified by polyurethane and organically modified montmorillonite was prepared by effectively dispersing the organically modified montmorillonite in interpenetrating polymer networks (IPNs) of epoxy and polyurethane via the sequential polymeric technique and in situ polymerization. The tribological performance of the resultant EP/PU nanocomposites was investigated by a pin‐on‐disc tester, and the results showed that adding polyurethane and organically modified clay to the EP matrix had a synergistic effect on improving tribological performance of EP/PU nanocomposites. The morphologies of the worn surface were studied by scanning electron microscopy (SEM) observations, and the results indicated that the mechanism of improving tribological performance of EP/PU nanocomposites was different from that of pure EP or pure EP/PU IPNs. The thermal behavior of these nanocomposites was also investigated by thermogravimeric analysis (TGA), and the results indicated that adding organically modified clay to the matrix remedied the deterioration of the thermal degradation temperature of the interpenetrating networks. Copyright © 2008 John Wiley & Sons, Ltd.     

Polyurethane/montmorillonite nanocomposites prepared from crystalline polyols, using 1,4-butanediol and organoclay hybrid as chain extenders

Polyurethane/montmorillonite (PU/MMT) nanocomposites were prepared via in situ polymerization from highly crystalline poly(butylene succinate)/poly(ethylene glycol) polyols and 4,4^′-dicyclohexylmethane diisocyanate, using both 1,4-butanediol and 1, 2, or 3 wt.% of a tris(hydroxymethyl)aminomethane-MMT hybrid, as chain extenders. The corresponding nanocomposites were designated PU-1MMT, PU-2MMT and PU-3MMT, respectively. The layered silicates were mostly intercalated in the nanocomposites. The distances between the individual silicate layers in the PU-1MMT and PU-2MMT were in the range of 2-10 nm, while those in the PU-3MMT were only about 2 nm. The inefficient exfoliation of the clay in this system was mainly due to the high crystallinity and polarity of the PBS polyol. There were no significant changes in the thermal properties of the pure PU and PU nanocomposites. However, the tensile modulus and elongation of the PU-2MMT at break were significantly greater than those of the pure PU and PU-3MMT.     

Thermal Degradation Kinetics of Polyurethane/Organically Modified Montmorillonite Clay Nanocomposites by TGA

Polyurethane (PU) has been prepared by using polyether polyol (jagropol oil) and 1,6- hexamethylene diisocyanate (HMDI) as a cross-linker. The organically modified montmorillonite clay (MMT) is well-dispersed into urethane matrix by an in situ polymerization method. A series of PU/MMT nanocomposites have been prepared by incorporating varying amounts of nanoclay viz., 1, 3, 5 and 6 wt %. Thermogravimetric analysis (TGA) of the PU/MMT nanocomposites has been performed in order to establish the thermal stability and their mode of thermal degradation. The TGA thermograms exhibited the fact that nanocomposites have a higher decomposition temperature in comparison with the pristine PU. It was found that the thermal degradation of all PU nanocomposites takes place in three steps. All the nanocomposites were stable up to 205°C. Degradation kinetic parameters of the composites have been calculated for each step of the thermal degradation processes using three mathematical models namely, Horowitz–Metzger, Coats–Redfern and Broido's methods.     

Study on thermal properties of polyurethane nanocomposites based on organo-sepiolite

The effects of sepiolite modified with γ-aminopropyltriethoxylsilane (KH550-Sp) on thermal properties of polyurethane (PU) nanocomposites were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TG), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and tensile test. The DSC results showed that the glass transition temperature of hard segments in PU/KH550-Sp nanocomposite increased with the increase of KH550-Sp, because sepiolite restricted the formation of hydrogen bonding within hard segments of polyurethane. TG results revealed that the thermal stability of PU was improved by KH550-Sp, and the onset decomposition temperature for PU nanocomposites with a KH550-Sp content of 3 wt% was about 20 °C higher than that for pure PU. The tensile properties of pure PU and nanocomposites before and after ageing 120 °C for 72 h were determined, and it was observed that the percentage loss in tensile strength decreased with the addition of KH550-Sp because of an oxidation barrier of KH550-Sp confirmed by ATR-FTIR.     

Preparation and thermal stability of Al2O3-clay and Fe2O3-clay nanocomposites, with potential application as remediation of radioactive effluents

In the last years metal/clays, aluminosilicates with properties and characteristics of microporous materials, have received more attention, due to the possibility of their use as matrix for nanoparticles encapsulation and stabilization processes. Some types of clays were comparatively evaluated for treating the simulated radioactive wastewater. The raw clay from Valea Chioarului Romania and its pillared forms with Al, Fe, pillars for decontamination of waste-waters with medium and low radioactivity were used. Characterization of the obtained materials was carried out using techniques such as X-ray diffraction, Fourier transform infrared spectroscopy, BET analyses and thermogravimetric analysis (DTG-TG), respectively. Also, the thermal stability of nanocomposites was highly superior to native clay due to the presence of the well-dispersed clay nanolayer, which has a barrier property in a composite system. Clay nanocomposite sample materials were obtained with good thermal stability after calcination. Clay nanocomposites samples were evaluated for remediation of radioactive effluents by treating the radioactive wastes streams. The ion-exchange characteristics and the abilities to uptake radioisotopes of indigene clay from Valea Chioarului area-Romania were examined. The results showed that the precursor used in sample preparation influenced the structural and textural properties of nanocomposites and also capability of prepared modified clay samples by pillaring to be potential candidates for use in connection with environmental protection, remediation of radioactive effluents, respectively.     

Preparation and characterization of poly(butylene terephthalate) nanocomposites from thermally stable organic-modified montmorillonite

In this paper, cetyl pyridium chloride (CPC) was employed to modify the montmorillonite. TGA analysis shows that the organic modified clay has higher thermal stability than hexadecyl trimethyl ammonium chloride modified montmorillonite and is suitable to be used for preparing poly(butylene terephthalate) (PBT)/clay nanocomposites at the high temperature. And then PBT/clay nanocomposites were prepared by direct melt intercalation. The results of XRD, TEM and HREM experiments show the formation of exfoliated-intercalated structure. The thermal stability of the nanocomposites does not evidently decrease, but the char residue at 600 °C remarkably increase compared with pure PBT. DSC results indicate that clay improves the melting temperature, the crystallization rate and crystallinity of the PBT molecules in the nanocomposites.     

聚氨酯/蒙脱土纳米复合材料的制备与性能研究

纳米复合材料由于其纳米尺寸效应 ,表面效应以及纳米粒子与基体界面间强的相互作用 ,具有优于相同组分常规复合材料的力学 ,热学等性能 ,引起了人们的广泛关注 .用纳米材料改性聚合物 ,制备纳米复合材料是获得高性能高分子复合材料的重要方法 ,采用较多的是插层复合法 ,可分为两类 ,一是单体预先插层于层状结构填料的晶片层间 ,然后聚合 ;二是聚合物溶液或熔体直接插层于层状结构填料的晶片层间 .聚氨酯 (PU)是由多异氰酸酯与多元醇通过加聚反应而形成的高聚物 ,其重复结构单元是氨基甲酸酯链段( R2 OCONHR1NHCOO) .PU弹性体具有耐磨…     

Layered silicate/epoxy nanocomposites: synthesis,characterization and properties

Novel epoxy‐clay nanocomposites have been prepared by epoxy and organoclays. Polyoxypropylene triamine (Jeffamine T‐403), primary polyethertriamine (Jeffamine T‐5000) and three types of polyoxypropylene diamine (Jeffamine D‐230, D‐400, D‐2000) with different molecular weight were used to treat Na‐montmorillonite (MMT) to form organoclays. The preparation involves the ion exchange of Na⁺ in MMT with the organic ammonium group in Jeffamine compounds. X‐ray diffraction (XRD) confirms the intercalation of these organic moieties to form Jeffamine‐MMT intercalates. Jeffamine D‐230 was used as a swelling agent for the organoclay and curing agent. It was established that the d₀₀₁ spacing of MMT in epoxy‐clay nanocomposites depends on the silicate modification. Although XRD data did not show any apparent order of the clay layers in the T5000‐MMT/epoxy nanocomposite, transmission electron microscopy (TEM) revealed the presence of multiplets with an average size of 5 nm and the average spacing between multiplets falls in the range of 100 Å. The multiplets clustered into mineral rich domains with an average size of 140 nm. Scanning electron microscopy (SEM) reveals the absence of mineral aggregate. Nanocomposites exhibit significant increase in thermal stability in comparison to the original epoxy. The effect of the organoclay on the hardness and toughness properties of crosslinked polymer matrix was studied. The hardness of all the resulting materials was enhanced with the inclusion of organoclay. A three‐fold increase in the energy required for breaking the test specimen was found for T5000‐MMT/epoxy containing 7 wt% of organoclay as compared to that of pure epoxy. Copyright © 2004 John Wiley & Sons, Ltd.     

Styrenic polymer nanocomposites based on an oligomerically-modified clay with high inorganic content

Clay was modified with an oligomeric surfactant containing styrene and lauryl acrylate units along with a small amount of vinylbenzyl chloride to permit the formation of an ammonium salt so that this can be attached to a clay. The oligomerically-modified clay contains 50% inorganic clay, and styrenic polymer nanocomposites, including those of polystyrene (PS), high-impact polystyrene (HIPS), styrene-acrylonitrile copolymer (SAN) and acrylonitrile-butadiene-styrene (ABS), were prepared by melt blending. The morphologies of the nanocomposites were evaluated by X-ray diffraction and transmission electron microscopy. Mixed intercalated/delaminated nanocomposites were formed for SAN and ABS while largely immiscible nanocomposites were formed for PS and HIPS. The thermal stability and fire properties were evaluated using thermogravimetric analysis and cone calorimetry, respectively. The plasticization from the oligomeric surfactant was suppressed and the tensile strength and Young's modulus were improved, compared to similar oligomerically-modified clays with higher organic content.