Indeno[1,2‐b]fluorene‐Based [2,2]Cyclophanes with 4n/4n and 4n/[4n+2] π Electrons: Syntheses,Structural Analyses,and Excitonic Coupling Properties

Indeno[1,2‐b]fluorene‐based [2,2]cyclophanes with 4n/4n and 4n/[4n+2] π‐electron systems were prepared, and their structures were identified by X‐ray crystallography. With short π–π distances around 3.0 Å, [2.2](5,11)indeno[1,2‐b]fluorenophane and its precursor [2.2](5,11)indeno[1,2‐b]fluorene‐6,12‐dionophane exhibit remarkable transannular interactions, leading to their unusual electrochemical and photophysical properties. With the aid of femtosecond transient absorption spectroscopy, the transition from the monomeric excited state to the redshifted H‐type dimeric state was first observed, correlating to the calculated excitonic energy splitting and the steady‐state absorption spectra induced by charge‐transfer‐mediated superexchange interaction.     

Synthesis of the Unknown Indeno[1,2‐a]fluorene Regioisomer: Crystallographic Characterization of Its Dianion

Of the five possible indenofluorene regioisomers, examples of a fully conjugated indeno[1,2‐a ]fluorene scaffold have so far remained elusive. This work reports the preparation and characterization of 7,12‐dimesitylindeno[1,2‐a ]fluorene as a highly reactive species. Experimental and computational data support the notion of a molecule with pronounced diradical character that exists in a triplet ground state. As such, both NICS and ACID calculations suggest that the indeno[1,2‐a ]fluorene scaffold is weakly Baird aromatic. Reduction of the unstable red solid with Cs metal produces the dianion of the title compound, from which single crystals could be obtained and X‐ray data acquired, thus fully corroborating the proposed indeno[1,2‐a ]fluorene hydrocarbon core.     

A New Four‐Component Reaction for the Synthesis of Spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles]

A new four‐component synthesis of spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles] and spiro[acenaphthylene‐1(2H),4′‐[4H‐indeno[1,2‐b]pyridines] by the reaction of indane‐1,3‐dione, 1,3‐dicarbonyl compounds, isatins (=1H‐indole‐2,3‐diones) or acenaphthylene‐1,2‐dione, and AcONH₄ in refluxing toluene in the presence of a catalytic amount of pyridine is reported.     

Diversity‐Oriented Synthesis of Novel 2′‐Aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] Derivatives via a One‐Pot Four‐Component Reaction

A sequential one‐pot four‐component reaction for the efficient synthesis of novel 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] derivatives 5 in the presence of AcONH₄ as a neutral, inexpensive, and dually activating catalyst is described (Scheme 1). The syntheses are achieved by reacting ninhydrin ( 1 ) with benzene‐1,2‐diamines 2 to give indenoquinoxalines, which are trapped in situ by malono derivatives 2 and various α‐methylenecarbonyl compounds 4 through cyclization, providing the multifunctionalized 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] analogs 5 . This chemistry provides an efficient and promising synthetic way of proceeding for the diversity‐oriented construction of the spiro[indenoquinoxalino‐pyran] skeleton.     

One‐Pot,Four‐Component Synthesis of Novel Spiro[indeno[2,1‐b]quinoxaline‐11,4′‐pyran]‐2′‐amines

A one‐pot, four‐component reaction for the efficient synthesis of novel spiro[indeno[2,1‐b]quinoxaline‐11,4′‐pyran]‐2′‐amines by using InCl₃ is described. The syntheses are achieved by reacting ninhydrin with 1,2‐diaminobenzenes to give indenoquinoxalines, which are trapped in situ by alkyl malonates and various α‐methylencarbonyl compounds through cyclization, providing multifunctionalized spiro‐substituted indeno[2,1‐b]quinoxaline‐11,4′‐pyran‐2′‐amines.     

Pd‐Catalyzed Cyclocarbonylation of 2‐(2‐Bromoaryl)indoles with CO as a C1 Source: Selective Access to 6 H‐Isoindolo[2,1‐a]indol‐6‐ones and Indeno[1,2‐b]indol‐10(5 H)‐ones

A highly efficient and regioselective synthetic route to 6 H‐isoindolo[2,1‐a]indol‐6‐ones and indeno[1,2‐b]indol‐10(5 H)‐ones through the Pd‐catalyzed cyclocarbonylation of 2‐(2‐bromoaryl)indoles under atmospheric CO pressure has been achieved. Notably, the regioselectivity of the reaction was exclusively dependent on the structural characteristics of the indole substrates. With N‐unsubstituted indoles as the starting materials, the reaction afforded 6H‐isoindolo[2,1‐a]indol‐6‐ones in good‐to‐excellent yields. On the other hand, with N‐substituted indoles as the substrates, the reaction gave indeno[1,2‐b]indol‐10(5 H)‐ones in a highly regioselective manner.     

Regioselective three‐component synthesis of novel indeno[1,2‐b]‐pyrazolo[4,3‐e]pyridines‐fused derivatives of 4‐azafluorenone alkaloid

New fused indeno[1,2‐b]pyridine derivatives have been prepared in a multicomponent reaction from benzaldehydes, indanedione and the appropriate aminoheteroaryl compound. The simple methodology permitted the syntheses of a series of indeno[1,2‐b]pyrazolo[4,3‐e]pyridines 4 from 5‐aminopyrazol 1 and modulated by the corresponding benzaldehyde 2 .     

Polycyclic N‐Heterocyclic Compounds,Part 69: Synthesis of 5‐amino‐1,2‐dihydro[1]benzofuro[3,2‐d]furo[2,3‐b]pyridines and their transformations to related compounds

Reaction of 3‐(3‐cyanopropoxy)[1]benzofuran‐2‐carbonitriles with potassium tert‐butoxide gave 5‐amino‐1,2‐dihydro[1]benzofuro[3,2‐d]furo[2,3‐b]pyridines and 5‐amino‐2,3‐dihydro[1]benzofuro[3,2‐b]oxepin‐4‐carbonitriles as new ring systems. Reactions of the 5‐chloro derivative, obtained from 5‐amino‐1,2‐dihydro[1]benzofuro[3,2‐d]furo[2,3‐b]pyridine, produced a dihydrofuran ring‐opened compound and 5‐substituted compounds. J. Heterocyclic Chem.,(2011).     

Beiträge zur Chemie schwefelhaltiger Heterocyclen, 4. Mitt.: 6H-Benz[b]indeno[1,2-d]thiophen und 10H-Benz[b]indeno-[2,1-d]thiophen

Zusammenfassung Intramolekulare Cyclisierungsreaktionen von 3-Phenyl-benzo[b]thiophen-2-carbonsäurechlorid und von 2-Phenyl-benzo[b]thiophen-3-carbonsäurechlorid lieferten 6-Oxo-6H-benz[b]indeno[1,2-d]thiophen bzw. 10-Oxo-10H-benz[b]indeno[2,1-d]thiophen.

---

Contributions to the chemistry of sulfur containing heterocycles, IV.: 6H-Benzo[b]indeno[1,2-d]thiophene and 10H-benzo-[b]indeno[1,2-d]thiophene

Intramolecular cyclization reactions of 3-phenyl-benzo[b]thiophene-2-carbonyl chloride and of 2-phenyl-benzo[b]-thiophene-3-carbonyl chloride gave 6-oxo-6H-benz[b]indeno-[1,2-d]thiophene and 10-oxo-10H-benz[b]indeno[2,1-d]thiophene, respectively.

---

---

3. Mitt.:F. Sauter, Mh. Chem.99, 2100 (1968).     

Strategy to Construct Stair‐Shaped Partially Reduced Naphtho[1,2‐b]pyrano[2,3‐d]oxepines and Dinaphtho[1,2‐b,d]oxepines

A concise and efficient base‐induced synthesis of stair‐shaped, 4‐methylthio‐2‐oxo‐5,6‐dihydro‐2H‐naphtho[1,2‐b]pyran[2,3‐d]oxepine‐3‐carbonitriles ( 3 ) has been delineated by the reaction of 3,4‐dihydronaphtho[1,2‐b]oxepin‐5(2H)‐one ( 1 ) and methyl 2‐cyano‐3,3‐dimethylthioacrylate in DMSO using powdered KOH as a base at room temperature. Amination of 3 has been achieved by reaction with secondary amine in ethanol at reflux temperature to yield 4‐sec‐amino‐2‐oxo‐5,6‐dihydro‐2H‐naphtho[1,2‐b]pyran[2,3‐d]oxepine‐3‐carbonitriles ( 4 ). Reaction of 3 with aryl methyl ketone ( 5 ) in DMSO at room temperature using powdered KOH as a base produced stair‐shaped 5‐aryl‐7,8‐dihydro‐1,4‐dioxa‐2,3‐dioxodinaphtho[1,2‐b,d]oxepine ( 6 ) in good yields. However, reaction of 6‐aryl‐2H‐pyran‐2‐one‐3‐carbonitrile ( 8 ) with 3,4‐dihydronaphtho[1,2‐b]oxepin‐5(2H)‐one ( 1 ) did not give similar product, but in lieu 4‐aryl‐5,6‐dihydronaphtho[1,2‐b]oxepino[4,5‐b]pyran‐2‐ylidene)acetonitrile ( 9 ) was isolated and characterized.     

A Novel Route to 1‐Substituted 3‐(Dialkylamino)‐9‐oxo‐9H‐indeno[2,1‐c]pyridine‐4‐carbonitriles

Heptalenecarbaldehydes 1 / 1′ as well as aromatic aldehydes react with 3‐(dicyanomethylidene)‐indan‐1‐one in boiling EtOH and in the presence of secondary amines to yield 3‐(dialkylamino)‐1,2‐dihydro‐9‐oxo‐9H‐indeno[2,1‐c]pyridine‐4‐carbonitriles (Schemes 2 and 4, and Fig. 1). The 1,2‐dihydro forms can be dehydrogenated easily with KMnO₄ in acetone at 0° (Scheme 3) or chloranil (=2,3,5,6‐tetrachlorocyclohexa‐2,5‐diene‐1,4‐dione) in a ‘one‐pot’ reaction in dioxane at ambient temperature (Table 1). The structures of the indeno[2,1‐c]pyridine‐4‐carbonitriles 5′ and 6a have been verified by X‐ray crystal‐structure analyses (Fig. 2 and 4). The inherent merocyanine system of the dihydro forms results in a broad absorption band in the range of 515–530 nm in their UV/VIS spectra (Table 2 and Fig. 3). The dehydrogenated compounds 5, 5′ , and 7a – 7f exhibit their longest‐wavelength absorption maximum at ca. 380 nm (Table 2). In contrast to 5 and 5′, 7a – 7f in solution exhibit a blue‐green fluorescence with emission bands at around 460 and 480 nm (Table 4 and Fig. 5).     

Reactions of hydrazonoyl halides 43 : Synthesis of some new 2,3‐dihydro‐1,3,4‐thiadiazoles,pyrazoles, pyrazolo[3,4‐d]‐pyridazines,thieno[2,3‐b]pyridines,pyrimidino[4′,5′:4,5]thieno[2,3‐b]‐pyridines and pyrrolo[3,4‐d]pyrazoles

2,3‐Dihydro‐1,3,4‐thiadiazoles, pyrazoles, pyrazolo[3,4‐d]pyridazines, thieno[2,3‐b]pyridines, pyrim‐idino[4′,5′:4,5]thieno[2,3‐b]pyridines and pyrrolo[3,4‐d]pyrazoles were obtained in a good yields by treatment of hydrazonoyl halides with each of alkyl carbodithioates, 3‐(dimethylamino)‐1‐naphtho[1,2‐d]furan‐2‐ylprop‐2‐en‐1‐one and N‐arylmalemides.     

Imidazo[2,1‐b]thiazoles,imidazo[2,1‐b]imidazoles and Pyrrolo[1,2‐c]imidazoles. synthesis,structure and evaluation of benzodiazepine receptor binding

As a continuation of our studies on bicyclic heterocycles with benzodiazepine receptor affinity, derivatives with a 5:5 bicyclic skeleton, namely imidazo[2,1‐b]thiazoles, imidazo[2,1‐b]imidazoles and pyrrolo[1,2‐c]imidazoles were prepared. The compounds possessed an aromatic substituent with different spatial arrangement and distance to the bicyclic skeleton. X‐ray structure analysis was performed for Z‐2‐(4‐chlorobenzylidene)‐5,5‐diphenyl‐2,3,5,6‐tetrahydroimidazo[2,1‐b]imidazoline‐3,6‐dione ( 6a ) and 5‐amino‐6‐cyano‐7‐phenyl‐1‐oxo‐3‐thioxo‐2,3‐dihydro‐1H‐pyrrolo[1,2‐c]imidazole ( 20a ). In contrast to the previously described arylideneimidazo[2,1‐b]thiazepinones the smaller heterocyclic ring systems investigated in this study were devoid of meaningful benzodiazepine receptor affinity as well as anti‐convulsant activity.     

Further studies on polycyclic arene sulfides. Preparation and mutagenic activity of 9, 10, 10a, 11a‐tetrahydrotriphenyleno[1,2‐b]‐thiirene, 1a,2,3,10b‐tetrahydro‐5H‐thiereno[3,4]benzo[1,2‐b]fluorene and 1a,2,3,11b‐tetrahydroacenaphtho[1′,2′:6,7]naphth[1,2‐b]thiirene

The title compounds 6 , 8 and 10 , which are dihydroarene sulfides of the environmental pollutants triphenylene, benzo[b]fluorene and benzo[k]fluoranthene, have been synthesized from the corresponding epoxides and N,N‐dimethylthioformamide. The mutagenicity of the episulfides has been investigated using Salmonella typhimurium strains TA98 and TA100. While compounds 6 and 10 were mutagenic, the tetrahydrobenzo[b]fluorene episulfide 8 was inactive.     

Synthesis,Crystal Structures,and Properties of 6,12‐Diaryl‐Substituted Indeno[1,2‐b]fluorenes

Fused polycyclic indeno[1,2‐b]fluorene derivatives with aryl substituents at the 6,12‐positions have been prepared as a potential antiaromatic 20π electronic system. They showed strong absorptions in the visible region and amphoteric redox properties. The quinoid‐type molecular structures were revealed by X‐ray crystal‐structure analysis, which indicated that the bond lengths of the quinoid unit depend on the aryl substituents. Whereas nucleus‐independent chemical shift NICS(1) calculations indicate the antiaromatic nature of the s‐indacene core, they have higher stability than substituted acene derivatives. The derivatives with difluorophenyl or anthryl groups were stable in solution. Vapor‐deposited thin films showed ambipolar carrier transportation in the field‐effect transistor devices.     

On the chemistry of 5‐aryl‐2‐hydrazino‐benzo[6,7]cyclohepta[1,2‐b]pyrido[2,3‐e] pyrimidin‐4‐one

Several pyrido[2,3‐e]pyrimidine fused with other rings have been prepared by intramolecular cyclization of 5‐(4‐chlorophenyl)‐2‐hydrazino‐benzo [6,7]cyclohepta‐[1,2‐b]pyrido[2,3‐e]pyrimidine‐4‐one ( 1 ) with acids, carbon disulfide to form triazole derivatives ( 2,4 ), halo‐ketones to give triazine derivative ( 5 ), β‐ketoesters, β‐cyanoesters, and β‐diketones to yield 2‐(1‐pyrazolyl) derivatives ( 7,9,10 ), and aldehydes to form arylhydrazone derivatives ( 11a,b ) which cyclized to form triazoles ( 12a,b ). Also, acyclic N‐nucleosides are prepared by heating under reflux 2‐hydrazino‐benzo[6,7]cyclohepta[1,2‐b]pyrido[2,3‐e] pyrimidin‐4‐one ( 1 ) with xylose and glucose to give the corresponding acyclic N‐nucleosides ( 13a,b ) which are cyclized to afford the corresponding protected tetra and penta–O‐acetate C‐nucleosides ( 14a,b ). Deacetylating of the latter nucleosides afforded the free acyclic C‐nucleosides ( 15a,b ). © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:34–43, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20248     

Synthesis of Indeno[1,2‐d]pyrimidin‐5‐Ones and Their Fluorescence in Solid State

New fluorescent compounds, 2‐substituted indeno[1,2‐d]pyrimidin‐5‐ones ( 3a , 3b , 3c , 3d ) were synthesized in good yield by the reaction of 2‐[bis(methylsulfanyl)methylene]indan‐1,3‐dione ( 1 ) with the respective amidine derivatives [guanidine carbonate ( 2a ), acetamidine hydrochloride ( 2b ), S‐methylisothiourea sulfate ( 2c ), and S‐benzylisothiourea sulfate ( 2d )]. 4‐Substituted amino‐2‐aminoindeno[1,2‐d]pyrimidin‐5‐ones ( 7b , 7c , 7d ) were synthesized by a one‐pot reaction of 1 , 2a and the respective amine compounds ( 4b , 4c , 4d ) in pyridine. These fused pyrimidine derivatives showed fluorescence in the solid state.     

Synthesis and Structure–Property Relationships of 2,2′‐Bis(benzo[b]phosphole) and 2,2′‐Benzo[b]phosphole–Benzo[b]heterole Hybrid π Systems

The first comprehensive study of the synthesis and structure–property relationships of 2,2′‐bis(benzo[b]phosphole)s and 2,2′‐benzo[b]phosphole–benzo[b]heterole hybrid π systems is reported. 2‐Bromobenzo[b]phosphole P‐oxide underwent copper‐assisted homocoupling (Ullmann coupling) and palladium‐catalyzed cross‐coupling (Stille coupling) to give new classes of benzo[b]phosphole derivatives. The benzo[b]phosphole–benzo[b]thiophene and ‐indole derivatives were further converted to P,X‐bridged terphenylenes (X=S, N) by a palladium‐catalyzed oxidative cycloaddition reaction with 4‐octyne through the C_β? H activation. X‐ray analyses of three compounds showed that the benzo[b]phosphole‐benzo[b]heterole derivatives have coplanar π planes as a result of the effective conjugation through inter‐ring C? C bonds. The π–π* transition energies and redox potentials of the cis and trans isomers of bis(benzo[b]phosphole) P‐oxide are very close to each other, suggesting that their optical and electrochemical properties are little affected by the relative stereochemistry at the two phosphorus atoms. The optical properties of the benzo[b]phosphole–benzo[b]heterole hybrids are highly dependent on the benzo[b]heterole subunits. Steady‐state UV/Vis absorption/fluorescence spectroscopy, fluorescence lifetime measurements, and theoretical calculations of the non‐fused and acetylene‐fused benzo[b]phosphole–benzo[b]heterole π systems revealed that their emissive excited states consist of two different conformers in rapid equilibrium.     

Donor/Acceptor Dihydroindeno[1,2‐a]fluorene and Dihydroindeno[2,1‐b]fluorene: Towards New Families of Organic Semiconductors

New families of donor/acceptor semiconductors based on dihydroindeno[1,2‐a]fluorene and dihydroindeno[2,1‐b]fluorene are reported. Due to the spiro bridges, this new generation of dihydroindenofluorenes allows a spatial separation of HOMO and LUMO, which retains the high E_T value of the dihydroindenofluorene backbone and excellent physical properties. This control of the electronic and physical properties has allowed a second generation of dihydroindeno[1,2‐a]fluorene to be obtained with strongly enhanced performance in green and sky‐blue phosphorescent organic light‐emitting diodes (PhOLEDs) relative to the first generation of materials. To date, this is the highest performance ever reported for a blue PhOLED by using a dihydroindenofluorene derivative. Through this structure–property relationship study, a remarkable difference of performance between syn and anti isomers has also been highlighted. This surprising behaviour has been attributed to the different symmetry of the two molecules, and highlights the importance of the geometry profiles in the design of host materials for PhOLEDs.     

The synthesis of novel polycyclic heterocyclic ring systems via photocyclization. 22 Dibenzo[f,h]benzothieno[2,3‐c]quinoline,dibenzo[f,h]benzothieno[2,3‐c][1,2,4]triazolo[4,3‐a]quinoline and dibenzo[f,h]naphtho[2′,1′:4,5]thieno[2,3‐c]quinoline

Photocyclization of 3‐chloro‐N‐(9‐phenanthryl)benzo[b]‐thiophene‐2‐carboxamide ( 3 ) and 3‐chloro‐N‐(9‐phenanthryl)‐naphtho[1,2‐b]thiophene‐2‐carboxamide ( 10 ) yielded dibenzo[f,h]benzothieno[2,3‐c]‐quinolin‐10(9H)‐one ( 4 ) and dibenzo[f,h]naphtho[2′,1′:4,5]thieno[2,3‐c]quinolin‐10(9H)‐one ( 11 ), respectively. Further elaboration of the lactams provided three novel unsubstituted new ring systems.