Activation‐Dependent Breathing in a Flexible Metal–Organic Framework and the Effects of Repeated Sorption/Desorption Cycling

A non‐interpenetrated metal–organic framework with a paddle‐wheel secondary building unit has been activated by direct thermal evacuation, guest exchange with a volatile solvent, and supercritical CO₂ drying. Conventional thermal activation yields a mixture of crystalline phases and some amorphous content. Exchange with a volatile solvent prior to vacuum activation produces a pure breathing phase with high sorption capacity, selectivity for CO₂ over N₂ and CH₄, and substantial hysteresis. Supercritical drying can be used to access a guest‐free open phase. Pressure‐resolved differential scanning calorimetry was used to confirm and investigate a systematic loss of sorption capacity by the breathing phase as a function of successive cycles of sorption and desorption. A corresponding loss of sample integrity was not detectable by powder X‐ray diffraction analysis. This may be an important factor to consider in cases where flexible MOFs are earmarked for industrial applications.     

Flexible Zirconium MOFs as Bromine‐Nanocontainers for Bromination Reactions under Ambient Conditions

A series of flexible MOFs (PCN‐605, PCN‐606, and PCN‐700) are synthesized and applied to reversible bromine encapsulation and release. The chemical stability of these Zr‐MOFs ensures the framework's integrity during the bromine adsorption, while the framework's flexibility allows for structural adaptation upon bromine uptake to afford stronger host–guest interactions and therefore higher bromine adsorption capacities. The flexible MOFs act as bromine‐nanocontainers which elongate the storage time of volatile halides under ambient conditions. Furthermore, the bromine pre‐adsorbed flexible MOFs can be used as generic bromine sources for bromination reactions giving improved yields and selectivities under ambient conditions when compared with liquid bromine.     

Polystyrene‐Supported Core–Shell Beads with Aluminium MOF Coating for Extraction of Organic Pollutants

Aluminium‐based metal–organic framework (MOF) coatings on polystyrene bead surfaces were easily synthesized by reacting an intermediate metal hydroxide coating with an organic linker. Several different sizes of polystyrene beads were coated with aluminium metal hydroxide to construct Al@PS core–shell bead materials. The activated Al@PS core–shell beads were involved to make a homogenous MOF‐based layer in the presence of the organic linker. By using different sizes of the PS support the size of MOFs on the PS composites could be fine‐tuned under specific reaction conditions. MOF‐coated core–shell bead materials (Al‐1,4‐NDC@PS and MIL‐53(Al)@PS) were characterized using various analytical techniques. Al‐1,4‐NDC@PS and MIL‐53(Al)@PS were evaluated for solid‐phase microextraction (SPME) of hydrophobic polycyclic aromatic hydrocarbons (PAHs) and hydrophilic non‐steroidal anti‐inflammatory drugs (NSAIDs), respectively. Al‐1,4‐NDC@PS‐1000 displayed high extraction recoveries ranging from 79.2 % to 99.8 % in the SPME of PAHs. Meanwhile, MIL‐53(Al)@PS‐1000 showed 85.9–99.0 % extraction recoveries in the SPME of NSAIDs. These results show that the proposed approach holds potential to extract organic analytes on an industrial scale.     

Precise Modulation of the Breathing Behavior and Pore Surface in Zr‐MOFs by Reversible Post‐Synthetic Variable‐Spacer Installation to Fine‐Tune the Expansion Magnitude and Sorption Properties

To combine flexibility and modifiability towards a more controllable complexity of MOFs, a post‐synthetic variable‐spacer installation (PVSI) strategy is used to implement kinetic installation/ uninstallation of secondary ligands into/from a robust yet flexible proto‐Zr‐MOF. This PVSI process features precise positioning of spacers with different length, size, number, and functionality, enabling accurate fixation of successive breathing stages and fine‐tuning of pore surface. It shows unprecedented synthetic tailorability to create complicated MOFs in a predictable way for property modification, for example, CO₂ and R22 adsorption/separation, thermal/chemical stability, and extended breathing behavior.     

Nanoscale Trimetallic Metal–Organic Frameworks Enable Efficient Oxygen Evolution Electrocatalysis

Metal–organic frameworks (MOFs) are a class of promising materials for diverse heterogeneous catalysis, but they are usually not directly employed for oxygen evolution electrocatalysis. Most reports focus on using MOFs as templates to in situ create efficient electrocatalysts through annealing. Herein, we prepared a series of Fe/Ni‐based trimetallic MOFs (Fe/Ni/Co(Mn)‐MIL‐53 accordingly to the Material of Institute Lavoisier) by solvothermal synthesis, which can be directly adopted as highly efficient electrocatalysts. The Fe/Ni/Co(Mn)‐MIL‐53 shows a volcano‐type oxygen evolution reaction (OER) activity as a function of compositions. The optimized Fe/Ni_2.4/Co_0.4‐MIL‐53 can reach a current density of 20 mA cm^?2 at low overpotential of 236 mV with a small Tafel slope of 52.2 mV dec^?1. In addition, the OER performance of these MOFs can be further enhanced by directly being grown on nickel foam (NF).     

Design and Application of a Non‐enzymatic Sensor Based on Metal‐organic Frameworks for the Simultaneous Determination of Carbofuran and Carbaryl in Fruits and Vegetables

A novel, stable and sensitive non‐enzymatic sensor was developed with metal‐organic frameworks (MOFs) that have attracted great attention in electrochemical sensors applications in recent years. The pore structures of MIL (Fe)‐101 and MIL (Fe)‐53 are the families of MOFs that were constructed via a simple solvothermal procedure. The 35MIL‐101(Fe)‐reduced graphene oxide nanocomposite has been used for modification of glassy carbon electrode for the determination of carbofuran (CBF) and carbaryl (CBR). The porosity of the composites increased the voltammetric responses significantly for CBF and CBR in a mixed solution that makes the simultaneous determination of both carbamate pesticides possible. Characterization of MIL (Fe)‐101 and MIL (Fe)‐53 were performed with FT‐IR, XRD, BET and SEM. Finally, the introduced sensor under the optimal conditions showed low detection limits of 1.2 and 0.5 nM within the linear ranges of 5.0–200.0 nM and 1.0–300.0 nM for CBF and CBR, respectively. The non‐enzymatic sensor was successfully used to monitoring of carbamates residue in vegetable and fruit samples.     

Homochiral MOF–Polymer Mixed Matrix Membranes for Efficient Separation of Chiral Molecules

Homochiral metal–organic framework (MOF) membranes have been recently reported for chiral separations. However, only a few high‐quality homochiral polycrystalline MOF membranes have been fabricated due to the difficulty in crystallization of a chiral MOF layer without defects on porous substrates. Alternatively, mixed matrix membranes (MMMs), which combine potential advantages of MOFs and polymers, have been widely demonstrated for gas separation and water purification. Here we report novel homochiral MOF–polymer MMMs for efficient chiral separation. Homochirality was successfully incorporated into achiral MIL‐53‐NH₂ nanocrystals by post‐synthetic modification with amino acids, such as l ‐histidine (l ‐His) and l ‐glutamic acid (l ‐Glu). The MIL‐53‐NH‐l ‐His and MIL‐53‐NH‐l ‐Glu nanocrystals were then embedded into polyethersulfone (PES) matrix to form homochiral MMMs, which exhibited excellent enantioselectivity for racemic 1‐phenylethanol with the highest enantiomeric excess value up to 100 %. This work, as an example, demonstrates the feasibility of fabricating diverse large‐scale homochiral MOF‐based MMMs for chiral separation.     

A Modulator‐Induced Defect‐Formation Strategy to Hierarchically Porous Metal–Organic Frameworks with High Stability

The pore size enlargement and structural stability have been recognized as two crucial targets, which are rarely achieved together, in the development of metal–organic frameworks (MOFs). Herein, we have developed a versatile modulator‐induced defect‐formation strategy, in the presence of monocarboxylic acid as a modulator and an insufficient amount of organic ligand, successfully realizing the controllable synthesis of hierarchically porous MOFs (HP‐MOFs) with high stability and tailorable pore characters. Remarkably, the integration of high stability and large mesoporous property enables these HP‐MOFs to be important porous platforms for applications involving large molecules, especially in catalysis.     

MOF‐Templated Synthesis of Ultrasmall Photoluminescent Carbon‐Nanodot Arrays for Optical Applications

Arrays of ultrasmall and uniform carbon nanodots (CDs) are of pronounced interest for applications in optical devices. Herein, we describe a low‐temperature calcination approach with rather inexpensive reactants. After glucose molecules had been loaded into the pores of metal–organic frameworks (MOFs), well‐defined CD arrays were produced by heating to 200 °C. The size and spacing of the CDs could be controlled by the choice of templating MOF: HKUST‐1, ZIF‐8, or MIL‐101. The sizes of the obtained CDs were approximately 1.5, 2.0, and 3.2 nm, which are close to the corresponding MOF pores sizes. The CD arrays exhibited interesting photophysical properties, including photoluminescence with tunable emission and pronounced nonlinear optical (NLO) effects. The NLO properties of the obtained CD arrays were significantly different from those of a CD suspension, thus indicating the existence of collective phenomena.     

Control of Metal–Organic Framework Crystallization by Metastable Intermediate Pre‐equilibrium Species

There is an increasing amount of interest in metal–organic frameworks (MOFs) for a variety of applications, from gas sensing and separations to electronics and catalysis. However, the mechanisms by which they crystallize remain poorly understood. Herein, an important new insight into MOF formation is reported. It is shown that, prior to network assembly, crystallization intermediates in the canonical ZIF‐8 system exist in a dynamic pre‐equilibrium, which depends on the reactant concentrations and the progress of reaction. Concentration can, therefore, be used as a synthetic handle to directly control particle size, with potential implications for industrial scale‐up and gas sorption applications. These findings enable the rationalization of apparent contradictions between previous studies of ZIF‐8 and opens up new opportunities for the control of crystallization in network solids more generally.     

Multi‐shelled Hollow Metal–Organic Frameworks

Hollow metal–organic frameworks (MOFs) are promising materials with sophisticated structures, such as multiple shells, that cannot only enhance the properties of MOFs but also endow them with new functions. Herein, we show a rational strategy to fabricate multi‐shelled hollow chromium (III) terephthalate MOFs (MIL‐101) with single‐crystalline shells through step‐by‐step crystal growth and subsequent etching processes. This strategy relies on the creation of inhomogeneous MOF crystals in which the outer layer is chemically more robust than the inner layer and can be selectively etched by acetic acid. The regulation of MOF nucleation and crystallization allows the tailoring of the cavity size and shell thickness of each layer. The resultant multi‐shelled hollow MIL‐101 crystals show significantly enhanced catalytic activity during styrene oxidation. The insight gained from this systematic study will aid in the rational design and synthesis of other multi‐shelled hollow structures and the further expansion of their applications.     

Metal–Organic Frameworks (MOFs) as Multivalent Materials: Size Control and Surface Functionalization by Monovalent Capping Ligands

Control over particle size and composition are pivotal to tune the properties of metal organic frameworks (MOFs), for example, for biomedical applications. Particle‐size control and functionalization of MIL‐88A were achieved by using stoichiometric replacement of a small fraction of the divalent fumarate by monovalent capping ligands. A fluorine‐capping ligand was used to quantify the surface coverage of capping ligand at the surface of MIL‐88A. Size control at the nanoscale was achieved by using a monovalent carboxylic acid‐functionalized poly(ethylene glycol) (PEG‐COOH) ligand at different concentrations. Finally, a biotin–carboxylic acid capping ligand was used to functionalize MIL‐88A to bind fluorescently labeled streptavidin as an example towards bioapplications.     

Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

Adsorptive Separation of Acetylene from Light Hydrocarbons by Mesoporous Iron Trimesate MIL‐100(Fe)

A reducible metal–organic framework (MOF), iron(III) trimesate, denoted as MIL‐100(Fe), was investigated for the separation and purification of methane/ethane/ethylene/acetylene and an acetylene/CO₂ mixtures by using sorption isotherms, breakthrough experiments, ideal adsorbed solution theory (IAST) calculations, and IR spectroscopic analysis. The MIL‐100(Fe) showed high adsorption selectivity not only for acetylene and ethylene over methane and ethane, but also for acetylene over CO₂. The separation and purification of acetylene over ethylene was also possible for MIL‐100(Fe) activated at 423 K. According to the data obtained from operando IR spectroscopy, the unsaturated Fe^III sites and surface OH groups are mainly responsible for the successful separation of the acetylene/ethylene mixture, whereas the unsaturated Fe^II sites have a detrimental effect on both separation and purification. The potential of MIL‐100(Fe) for the separation of a mixture of C₂H₂/CO₂ was also examined by using the IAST calculations and transient breakthrough simulations. Comparing the IAST selectivity calculations of C₂H₂/CO₂ for four MOFs selected from the literature, the selectivity with MIL‐100(Fe) was higher than those of CuBTC, ZJU‐60a, and PCP‐33, but lower than that of HOF‐3.     

Effective and Selective Catalysts for Cinnamaldehyde Hydrogenation: Hydrophobic Hybrids of Metal–Organic Frameworks,Metal Nanoparticles,and Micro‐ and Mesoporous Polymers

Metal–organic frameworks (MOFs) as selectivity regulators for catalytic reactions have attracted much attention, especially MOFs and metal nanoparticle (NP) shelled structures, e.g., MOFs@NPs@MOFs. Nevertheless, making hydrophilic MOF shells for gathering hydrophobic reactants is challenging. Described here is a new and viable approach employing conjugated micro‐ and mesoporous polymers with iron(III) porphyrin (FeP‐CMPs) as a new shell to fabricate MIL‐101@Pt@FeP‐CMP. It is not only hydrophobic and porous for enriching reactants, but also possesses iron sites to activate C=O bonds, thereby regulating the selectivity for cinnamyl alcohol in the hydrogenation of cinnamaldehyde. Interestingly, MIL‐101@Pt@FeP‐CMP^sponge can achieve a high turnover frequency ( 1516.1 h⁻¹), with 97.3 % selectivity for cinnamyl alcohol at 97.6 % conversion.     

Flexible Zirconium Metal‐Organic Frameworks as Bioinspired Switchable Catalysts

Flexible metal–organic frameworks (MOFs) are highly desirable in host–guest chemistry owing to their almost unlimited structural/functional diversities and stimuli‐responsive pore architectures. Herein, we designed a flexible Zr‐MOF system, namely PCN‐700 series, for the realization of switchable catalysis in cycloaddition reactions of CO₂ with epoxides. Their breathing behaviors were studied by successive single‐crystal X‐ray diffraction analyses. The breathing amplitudes of the PCN‐700 series were modulated through pre‐functionalization of organic linkers and post‐synthetic linker installation. Experiments and molecular simulations confirm that the catalytic activities of the PCN‐700 series can be switched on and off upon reversible structural transformation, which is reminiscent of sophisticated biological systems such as allosteric enzymes.     

Long‐Term Photostability in Terephthalate Metal–Organic Frameworks

Prolonged (weeks) UV/Vis irradiation under Ar of UiO‐66(Zr), UiO66 Zr‐NO₂, MIL101 Fe, MIL125 Ti‐NH₂, MIL101 Cr and MIL101 Cr(Pt) shows that these MOFs undergo photodecarboxylation of benzenedicarboxylate (BDC) linker in a significant percentage depending on the structure and composition of the material. Routine characterization techniques such as XRD, UV/Vis spectroscopy and TGA fail to detect changes in the material, although porosity and surface area change upon irradiation of powders. In contrast to BCD‐containing MOFs, zeolitic imidazolate ZIF‐8 does not evolve CO₂ or any other gas upon irradiation.     

Monolithic metal–organic framework MIL‐53(Al)‐polymethacrylate composite column for the reversed‐phase capillary liquid chromatography separation of small aromatics

A monolithic capillary column containing a composite of metal–organic framework MIL‐53(Al) incorporated into hexyl methacrylate‐co‐ethylene dimethacrylate was prepared to enhance the separation of mixtures of small aromatic compounds by using capillary liquid chromatography. The addition of 10 mg/mL MIL‐53(Al) microparticles increased the micropore content in the monolithic matrix and increased the Brunauer–Emmett–Teller surface area from 26.92 to 85.12 m²/g. The presence of 1,4‐benzenedicarboxylate moieties within the structure of MIL‐53(Al) as an organic linker greatly influenced the separation of aromatic mixtures through π–π interactions. High‐resolution separation was obtained for a series of alkylbenzenes (with resolution factors in the range 0.96–1.75) in less than 8 min, with 14 710 plates/m efficiency for propylbenzene, using a binary polar mobile phase of water/acetonitrile in isocratic mode. A reversed‐phase separation mechanism was indicated by the increased retention factor and resolution as the water percentage in the mobile phase increased. A stability study on the composite column showed excellent mechanical stability under various conditions. The higher resolution and faster separation observed at increased temperature indicated an exothermic separation, whereas the negative values for the free energy change of transfer indicated a spontaneous process.     

The Metal–Organic Framework MIL‐53(Al) Constructed from Multiple Metal Sources: Alumina,Aluminum Hydroxide,and Boehmite

Three aluminum compounds, namely alumina, aluminum hydroxide, and boehmite, are probed as the metal sources for the hydrothermal synthesis of a typical metal–organic framework MIL‐53(Al). The process exhibits enhanced synthetic efficiency without the generation of strongly acidic byproducts. The time‐course monitoring of conversion from different aluminum sources into MIL‐53(Al) is achieved by multiple characterization that reveals a similar but differentiated crystallinity, porosity, and morphology relative to typical MIL‐53(Al) prepared from water‐soluble aluminum salts. Moreover, the prepared MIL‐53(Al) constructed with the three insoluble aluminum sources exhibit an improved thermal stability of up to nearly 600 °C and enhanced yields. Alumina and boehmite are more preferable than aluminum hydroxide in terms of product porosity, yield, and reaction time. The adsorption performances of a typical environmental endocrine disruptor, dimethyl phthalate, on the prepared MIL‐53(Al) samples are also investigated. The improved structural stability of MIL‐53(Al) prepared from these alternative aluminum sources enables double‐enhanced adsorption performance (up to 206 mg g^?1) relative to the conventionally obtained MIL‐53(Al).     

One‐Step Synthesis of Hybrid Core–Shell Metal–Organic Frameworks

Epitaxial growth of MOF‐on‐MOF composite is an evolving research topic in the quest for multifunctional materials. In previously reported methods, the core–shell MOFs were synthesized via a stepwise strategy that involved growing the shell‐MOFs on top of the preformed core‐MOFs with matched lattice parameters. However, the inconvenient stepwise synthesis and the strict lattice‐matching requirement have limited the preparation of core–shell MOFs. Herein, we demonstrate that hybrid core–shell MOFs with mismatching lattices can be synthesized under the guidance of nucleation kinetic analysis. A series of MOF composites with mesoporous core and microporous shell were constructed and characterized by optical microscopy, powder X‐ray diffraction, gas sorption measurement, and scanning electron microscopy. Isoreticular expansion of microporous shells and orthogonal modification of the core was realized to produce multifunctional MOF composites, which acted as size selective catalysts for olefin epoxidation with high activity and selectivity.