Protection Group Effects During α,γ‐Diol Lignin Stabilization Promote High‐Selectivity Monomer Production

Protection groups were introduced during biomass pretreatment to stabilize lignin's α,γ‐diol group during its extraction and prevent its condensation. Acetaldehyde and propionaldehyde stabilized the α,γ‐diol without any aromatic ring alkylation, which significantly increased final product selectivity. The subsequent hydrogenolysis catalyzed by Pd/C generated lignin monomers at near‐theoretical yields based on Klason lignin (48 % from birch, 20 % from spruce, 70 % from high‐syringyl transgenic poplar), and with high selectivity to a single 4‐n‐propanolsyringol product (80 %) in the case of the poplar. Unlike direct hydrogenation of native wood, hydrogenolysis of protected lignin with Ni/C also led to high selectivity to this single product (78 %), paving the way to high‐selectivity lignin upgrading with base metal catalysts. The use of extracted lignin facilitated valorization of polysaccharides, leading to high yields of all three major biomass polymers to a single major product.     

Isolation of Functionalized Phenolic Monomers through Selective Oxidation and CO Bond Cleavage of the β‐O‐4 Linkages in Lignin

Functionalized phenolic monomers have been generated and isolated from an organosolv lignin through a two‐step depolymerization process. Chemoselective catalytic oxidation of β‐O‐4 linkages promoted by the DDQ/tBuONO/O₂ system was achieved in model compounds, including polymeric models and in real lignin. The oxidized β‐O‐4 linkages were then cleaved on reaction with zinc. Compared to many existing methods, this protocol, which can be achieved in one pot, is highly selective, giving rise to a simple mixture of products that can be readily purified to give pure compounds. The functionality present in these products makes them potentially valuable building blocks.     

Synthesis of (−)‐3‐Carene‐2,5‐dione via Allylic Oxidation of (+)‐3‐Carene

Activated carbon‐supported CuCl₂ (CuCl₂/AC) is a heterogeneous catalyst for the liquid‐phase selective allylic oxidation of (+)‐3‐carene with tert‐butyl hydroperoxide (TBHP) and O₂ to produce (?)‐3‐carene‐2,5‐dione. The possible reaction mechanism and the effects of different factors on the allylic oxidation were investigated. The optimal conditions are as follows: reaction temperature, 45 °C; molar ratio of CuCl₂ to (+)‐3‐carene, 1%; volume ratio of (+)‐3‐carene to TBHP, 1:3; and reaction time, 12 h. Under the optimal conditions, the conversion of (+)‐3‐carene reached 100%, whereas the selectivity for (?)‐3‐carene‐2,5‐dione reached 78%. The CuCl₂/AC catalyst was characterized via X‐ray diffraction, and the chemical structure of the target compound was identified via infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, mass spectrometry, and optical analysis.     

N‐Heterocyclic Carbene Catalyzed Concerted Nucleophilic Aromatic Substitution of Aryl Fluorides Bearing α,β‐Unsaturated Amides

Concerted nucleophilic aromatic substitution (CS_NAr) has emerged as a powerful mechanistic manifold, in which nucleophilic aromatic substitution can proceed in one step without the need to form a Meisenheimer intermediate. However, all of the CS_NAr reactions reported thus far require a stoichiometric strong base or activating reagent, and no catalytic variants have yet been reported. Herein, we report an N‐heterocyclic carbene (NHC)‐catalyzed intramolecular cyclization of acrylamides that contain a 2‐fluorophenyl group on the nitrogen through a CS_NAr reaction. By using this catalytic method, it is possible to synthesize an array of quinolin‐2‐one derivatives, which are common structural motifs in pharmaceuticals and organic materials. DFT calculations unambiguously revealed that this reaction proceeds through the concerted nucleophilic aromatic substitution of aryl fluorides, in which a stereoelectronic σ (C_ipso‐C_β)→ σ*(C_ipso‐F) interaction critically contributes to the stabilization of the transition state for the cyclization.     

Asymmetric α‐Hydroxylation of Tetralone‐Derived β‐Ketoesters by Using a Guanidine–Urea Bifunctional Organocatalyst in the Presence of Cumene Hydroperoxide

Highly enantioselective catalytic oxidation of 1‐tetralone‐derived β‐keto esters was achieved by using a guanidine–urea bifunctional organocatalyst in the presence of cumene hydroperoxide (CHP), a safe, commercially available oxidant. The α‐hydroxylation products were obtained in 99 % yield with up to 95 % enantiomeric excess (ee). The present oxidation was successfully applied to synthesize a key intermediate of the anti‐cancer agent daunorubicin ( 2 ).     

Preparation of an Electrode That Immobilizes NAD‐Dependent Alcohol Dehydrogenase by Using a Redox Polymer Containing 1,10‐Phenanthroline‐5,6‐dione

A redox polymer (PAHA‐Ru), modified electrode exhibited excellent catalytic activity for the electrochemical oxidation of β‐nicotinamide adenine dinucleotide (NADH). PAHA‐Ru was composed of carboxyl groups and ruthenium complexes containing 1,10‐phenanthroline‐5,6‐dione (phen‐dione). The stability of the PAHA‐Ru film was increased by incorporating poly(diallyldimethylammonium chloride) (PDDA) owing to the formation of a polyelectrolyte complex between the PAHA‐Ru and PDDA. The catalytic efficiency of the oxidation of NADH using the PAHA‐Ru/PDDA‐modified electrode was also greater than that using a PAHA‐Ru‐modified electrode. NAD‐dependent alcohol dehydrogenase (ADH) was entrapped in the PAHA‐Ru/PDDA film on the surface of the glassy carbon electrode. Electrochemical oxidation of ethanol using the ADH‐entrapped electrode was also observed.     

Catalytic Asymmetric Synthesis of 3‐(α‐Hydroxy‐β‐carbonyl) Oxindoles by a ScIII‐Catalyzed Direct Aldol‐Type Reaction

A direct catalytic asymmetric aldol‐type reaction of 3‐substituted‐2‐oxindoles with glyoxal derivatives and ethyl trifluoropyruvate, catalyzed by a chiral N,N′‐dioxide–Sc(OTf)₃ (Tf=trifluoromethanesulfonyl) complex, has been developed that tolerates a wide range of substrates. The reaction proceeds in good yields and excellent enantioselectivities (up to 93 % yield, 99:1 diastereomeric ratio (dr), and >99 % enantiomeric excess (ee)) under mild conditions, to deliver 3‐(α‐hydroxy‐β‐carbonyl) oxindoles with vicinal quaternary–tertiary or quaternary–quaternary stereocenters. Even with 1 mol % catalyst loading or on scaleup (10 mmol of starting material), maintenance of ee was observed, which showed the potential value of the catalyst system. In studies probing the reaction mechanism, a positive nonlinear effect was observed and Sc^III‐based enolate intermediates were detected by using ESIMS. On the basis of the experimental results and previous reports, a possible catalytic cycle was assumed.     

Efficient Synthesis of β‐Hydroxy‐α‐Amino Acid Derivatives via Direct Catalytic Asymmetric Aldol Reaction of α‐Isothiocyanato Imide with Aldehydes

An easily available and efficient chiral N,N′‐dioxide–nickel(II) complex catalyst has been developed for the direct catalytic asymmetric aldol reaction of α‐isothiocyanato imide with aldehydes which produces the products in morderate to high yields (up to 98 %) with excellent diastereo‐ (up to >99:1 d.r.) and enantioselectivities (up to >99 % ee). A variety of aromatic, heteroaromatic, α,β‐unsaturated, and aliphatic aldehydes were found to be suitable substrates in the presence of 2.5 mol % L ‐proline‐derived N,N′‐dioxide L5 –nickel(II) complex. This process was air‐tolerant and easily manipulated with available reagents. Based on experimental investigations, a possible transition state has been proposed to explain the origin of reactivity and asymmetric inductivity.     

1,3,4‐Thiadiazolidine‐2,5‐dione: Crystal Structure,Calculation of Aromaticity and Photodecomposition Quantum Yield

Single crystals of 1,3,4‐thiadiazolidine‐2,5‐dione ( 1 ) have been grown and the X‐ray crystal structure showed the molecule to be planar with sp²‐hybridized nitrogen atoms. Density functional theory calculations of nucleus‐independent chemical shifts profiles show that 1 is non‐aromatic. From actinometry, it was found that continuous photolysis of 1 in methanol at λ = 254 nm resulted in a decomposition with the quantum yield Φ = 0.076(7) mol/Einstein at room temperature.     

Study of the reactions of 3‐acetoacetyl‐7‐methyl‐2H,5H‐pyrano[4,3‐b]pyran‐2,5‐dione with aromatic amines

The reactions of 3‐acetoacetyl‐7‐methyl‐2H,5H‐pyrano[4,3‐b]pyran‐2,5‐dione with aromatic amines afforded 3‐(arylaminomethylene)‐6‐methylpyran‐2,4‐dione. Our results allowed the correction of the structures reported in the literature for the products of these reactions.     

Gold‐catalyzed Reactions of 3‐Alkynyloxireno[2, 3‐b]chromenones to Form 3(2H)‐Furanones via a Domino Pathway

3(2H)‐Furanones are efficiently generated from 3‐alkynyl oxireno[2,3‐b]chromenones by an Au/DDQ‐catalyzed domino reaction through a pathway composed of cyclization, C? C cleavage, nucleophilic addition, oxidation, and nucleophilic addition. It was found that stoichiometric AuCl₃ or catalytic Au with stoichiometric DDQ can oxidize the benzylic sp³ C? H bond to facilitate nucleophilic addition.     

A 3,4‐trans‐Fused Cyclic Protecting Group Facilitates α‐Selective Catalytic Synthesis of 2‐Deoxyglycosides

A practical approach has been developed to convert glucals and rhamnals into disaccharides or glycoconjugates with high α‐selectivity and yields (77–97 %) using a trans‐fused cyclic 3,4‐O‐disiloxane protecting group and TsOH?H₂O (1 mol %) as a catalyst. Control of the anomeric selectivity arises from conformational locking of the intermediate oxacarbenium cation. Glucals outperform rhamnals because the C6 side‐chain conformation augments the selectivity.     

Copper‐Catalyzed Enantioselective Allylic Alkylation with a γ‐Butyrolactone‐Derived Silyl Ketene Acetal

Herein, we report a Cu‐catalyzed enantioselective allylic alkylation using a γ‐butyrolactone‐derived silyl ketene acetal. Critical to the development of this work was the identification of a novel mono‐picolinamide ligand with the appropriate steric and electronic properties to afford the desired products in high yield (up to 96 %) and high ee (up to 95 %). Aryl, aliphatic, and unsubstituted allylic chlorides bearing a broad range of functionality are well‐tolerated. Spectroscopic studies reveal that a Cu^I species is likely the active catalyst, and DFT calculations suggest ligand sterics play an important role in determining Cu coordination and thus catalyst geometry.     

Exceptionally E‐ and β‐Selective NHC–Cu‐Catalyzed Proto‐Silyl Additions to Terminal Alkynes and Site‐ and Enantioselective Proto‐Boryl Additions to the Resulting Vinylsilanes: Synthesis of Enantiomerically Enriched Vicinal and Geminal Borosilanes

An exceptionally site‐ and E‐selective catalytic method for preparation of Si‐containing alkenes through protosilylation of terminal alkynes is presented. Furthermore, the vinylsilanes obtained are used as substrates to generate vicinal or geminal borosilanes by another catalytic process; such products are derived from enantioselective protoborations of the Si‐substituted alkenes. All transformations are catalyzed by N‐heterocyclic carbene (NHC) copper complexes. Specifically, a commercially available imidazolinium salt, cheap CuCl (1.0 mol %) and Me₂PhSi–B(pin), readily and inexpensively prepared in one vessel, are used to convert terminal alkynes to (E)‐β‐vinylsilanes efficiently (79–98 % yield) and in >98 % E and >98 % β‐selectivity. Vinylsilanes are converted to borosilanes with 5.0 mol % of a chiral NHC–Cu complex in 33–94 % yield and up to 98.5:1.5 enantiomeric ratio (e.r.). Alkyl‐substituted substrates afford vicinal borosilanes exclusively; aryl‐ and heteroaryl‐substituted alkenes deliver the geminal isomers preferentially. Different classes of chiral NHCs give rise to high enantioselectivities in the two sets of transformations: C₁‐symmetric monodentate Cu complexes are most suitable for reactions of alkyl‐containing vinylsilanes and bidentate sulfonate‐bridged variants furnish the highest e.r. for substrates with an aryl substituent. Working models that account for the observed trends in selectivity are provided. Utility is demonstrated through application towards a formal enantioselective total synthesis of naturally occurring antibacterial agent bruguierol A.     

Palladium‐catalyzed cyclization of β‐bromo‐α,β‐unsaturated ketones with arylhydrazines leading to 3‐substituted 1‐aryl‐1 H‐pyrazoles

β‐Bromo‐α,β‐unsaturated ketones are condensed with arylhydrazines to form hydrazones, which are in situ intramolecularly cyclized into 3‐substituted 1‐aryl‐1 H‐pyrazoles under a catalytic system of Pd(OAc)₂/1,3‐bis(diphenylhosphino)propane (dppp)/NaO^tBu. Copyright © 2012 John Wiley & Sons, Ltd.     

Highly stereoselective coordination polymerization of β‐myrcene from a lanthanide‐based catalyst: Access to bio‐sourced elastomers

Polymerization of β‐myrcene with neodymium borohydride‐based coordination catalysts is very efficient, affording poly‐β‐myrcene (polymyrcene, PMy) with high selectivity. With stoichiometric amounts of n‐butylethyl magnesium (BEM) as co‐catalyst, good control over macromolecular data along with cis‐stereoselectivity up to 98.5%, are obtained. In the presence of excess BEM, high level of transfer reactions efficiency between neodymium and magnesium is clearly evidenced whereas the selectivity switches to 3,4‐rich. Combining the neodymium pre‐catalyst with triisobutyl aluminum in the presence of a boron activator affords PMy in good yield, but the polymer material displays low solubility, likely due to the occurrence of crosslinking. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Functional Ionic Liquids Promoted Double Michael Reaction of Benzofuran‐3‐one or 1‐Indone and Symmetric Dienones: Construction of Spiro[benzofuran‐2,1’‐cyclohexane]‐3‐one or Spiro[cyclohexane‐1,2’‐indene]‐1’,4(3’H)‐dione Derivatives

The double Michael reactions between benzofuran‐3‐one or 1‐indone and symmetric dienones in the presence of catalytic ionic liquids were successfully developed and spiro[benzofuran‐2,1’‐cyclohexane]‐3‐one or spiro[cyclohexane‐1,2’‐indene]‐1’,4(3’H )‐dione derivatives containing a spiro quaternary stereogenic center, which widely exist in biologically active products and building blocks in organic synthesis, were obtained in excellent yields (up to 99%). This catalytic system was also extended to the double Michael reaction of less reactive 1‐indone and the desired products were also obtained in 31%‐62% yields. The catalytic system was highly active and efficient for a broad of substrates under mild conditions.     

Palladium(II) acetate catalyzed efficient synthesis of N‐aryl‐α,β‐unsaturated amides via carbonylative addition of aniline derivatives to aromatic alkynes

A series of new N‐aryl‐α,β‐disubstituted amides (gem or E1; trans or E2) were synthesized in good yields by carbonylative addition of aniline derivatives 1a–f to aromatic alkynes 2a,b catalyzed by Pd(OAc)₂ and 1,3‐bis(diphenylphosphino)propane. The catalytic synthesis of tertiary α,β‐unsaturated amides was also successfully achieved. Traces of products were observed in the absence of p‐toluenesulfonic acid used as an additive. The reaction is sensitive to the type of phosphine ligand and solvent. Copyright © 2002 John Wiley & Sons, Ltd.     

Catalytic Enantioselective Conjugate Alkynylation of α,β‐Unsaturated 1,1,1‐Trifluoromethyl Ketones with Terminal Alkynes

The first catalytic enantioselective conjugate alkynylation of α,β‐unsaturated 1,1,1‐trifluoromethyl ketones has been carried out. Terminal alkynes and 1,3‐diynes were treated with trifluoromethyl ketones in the presence of a low catalytic load of a Cu^I‐MeOBIPHEP complex (2.5 mol %) and triethylamine (10 mol %) to give the corresponding trifluoromethyl ketones bearing a propargylic stereogenic center at the β position with good yields and excellent enantiomeric excesses in most of the cases. No 1,2‐addition products were formed under the reaction conditions. The procedure showed broad substrate scope for alkyne, diyne, and enone. A rationale for the observed stereochemistry has been provided. Finally, the potential application of the reaction products in the synthesis of chiral tetrahydrofurans bearing a trifluoromethylated quaternary stereocenter has been devised.     

Synthesis of α,β‐ and β‐Unsaturated Acids and Hydroxy Acids by Tandem Oxidation,Epoxidation, and Hydrolysis/Hydrogenation of Bioethanol Derivatives

We report a reaction platform for the synthesis of three different high‐value specialty chemical building blocks starting from bio‐ethanol, which might have an important impact in the implementation of biorefineries. First, oxidative dehydrogenation of ethanol to acetaldehyde generates an aldehyde‐containing stream active for the production of C₄ aldehydes via base‐catalyzed aldol‐condensation. Then, the resulting C₄ adduct is selectively converted into crotonic acid via catalytic aerobic oxidation (62 % yield). Using a sequential epoxidation and hydrogenation of crotonic acid leads to 29 % yield of β‐hydroxy acid (3‐hydroxybutanoic acid). By controlling the pH of the reaction media, it is possible to hydrolyze the oxirane moiety leading to 21 % yield of α,β‐dihydroxy acid (2,3‐dihydroxybutanoic acid). Crotonic acid, 3‐hydroxybutanoic acid, and 2,3‐dihydroxybutanoic acid are archetypal specialty chemicals used in the synthesis of polyvinyl‐co‐unsaturated acids resins, pharmaceutics, and bio‐degradable/ ‐compatible polymers, respectively.