Catenation of 1,3‐Diphosphacyclobutane‐2,4‐diyl Units Having 2,4,6‐Tri‐tert‐butylphenyl Protecting Groups and a P‐sec‐Butyl Group in the Ring

Two and three stable 1‐sec‐butyl‐2,4‐bis(2,4,6‐tri‐tert‐butylphenyl)‐1,3‐diphosphacyclobutane‐2,4‐diyl units were catenated to construct multi‐biradical derivatives by utilizing 1,3‐di‐, 1,4‐di‐, and 1,3,5‐trimethylenebenzenes as bridging groups, respectively. UV/Vis spectroscopic and cyclovoltammetric (CV) properties of the multi‐biradicals indicate a non‐conjugative interaction between the concatenated biradical units.     

Two Sterically Encumbered 1,3,2‐Dioxaphospholanes – Reactions,Comparison of Crystal Structures and Computational Explanations

3,4,5,6‐Tetrachlorobenzo‐3‐(2,4,6‐tri‐tert‐butylphenyl)‐1,3,2‐dioxaphospholane ( 2 ) and benzo‐3‐(2,4,6‐tri‐tert‐butylphenyl)‐1,3,2‐dioxaphospholane ( 4 ), in which the reactive P^III‐center lies close to the sterically demanding Mes* group (Mes* = 2,4,6‐tri‐tert‐butylphenyl), were prepared from Mes*–Br and the corresponding P‐chloro‐phospholane. Compounds 2 and 4 reacted with various oxidants, azides, MeSO₃CF₃ or [(tht)AuCl] (tht = tetrahydrothiophene) to give the expected products. All crystal structures of the products display a strongly distorted Mes* system with a boat conformation of the phenyl ring and appreciable out‐of‐plane deviations of phosphorus and the ortho‐tert‐butyl groups to opposite sides of the ring. Quantum chemical calculations at the DFT (density functional theory) level of theory were used in order to discriminate between intra‐ and intermolecular forces, which are responsible for these distortions.     

New Aspects of 1,3‐Diphosphacyclobutane‐2,4‐diyls

1,3‐Di(tert‐butyl)‐2,4‐bis[2,4,6‐tri(tert‐butyl)phenyl]‐1,3‐diphosphacyclobutane‐2,4‐diyl was formed from [2,4,6‐tri(tert‐butyl)phenyl]phosphaacetylene and t‐BuLi. In addition, the X‐ray diffraction analysis was carried out, together with theoretical calculations of the structure and NMR data.     

Observation of a Metastable P‐Heterocyclic Radical by Muonium Addition to a 1,3‐Diphosphacyclobutane‐2,4‐diyl

A 1,3‐diphosphacyclobutane‐2,4‐diyl contains a unique unsaturated cyclic unit, and the presence of radical‐type centers have been expected as a source of functionality. This study demonstrates that the P‐heterocyclic singlet biradical captures muonium (Mu=[μ⁺e^?]), the light isotope of a hydrogen radical, to generate an observable P‐heterocyclic paramagnetic species. Investigation of a powder sample of 2,4‐bis(2,4,6‐tri‐t‐butylphenyl)‐1‐t‐butyl‐3‐benzyl‐1,3‐diphosphacyclobutane‐2,4‐diyl using muon (avoided) level‐crossing resonance (μLCR) spectroscopy revealed that muonium adds to the cyclic P₂C₂ unit. The muon hyperfine coupling constant (A_μ) indicated that the phosphorus atom bearing the t‐butyl group trapped muonium to provide a metastable P‐heterocyclic radical involving the ylidic MuP(<)=C moiety. The observed regioselective muonium addition correlates the canonical formula of 1,3‐diphosphacyclobutane‐2,4‐diyl.     

Monomeric Magnesium and Calcium Complexes containing the Rigid,Dianionic 1, 2‐Bis[(2, 5‐di‐tert‐butylphenyl)imino]acenaphthene (dtb‐BIAN) and 1, 2‐Bis[(2‐biphenyl)imino]acenaphthene (bph‐BIAN) Ligands

The new rigid bidentate nitrogen ligands 1, 2‐bis[(2, 5‐di‐tert‐butylphenyl)imino]acenaphthene ( 1 ) (dtb‐BIAN) and 1, 2‐bis[(2‐biphenyl)imino]acenaphthene ( 2 ) (bph‐BIAN) have been synthesized by condensation of 1, 2‐acenaphthylenedione with 2, 5‐di‐tert‐butylaniline and 2‐aminobiphenyl, respectively. Reduction of 1 and 2 with magnesium and calcium results in the formation of the monomeric metal complexes [(dtb‐BIAN)Mg(THF)₂] ( 3 ), [(bph‐BIAN)Mg(DME)₂] ( 4 ), and [(bph‐BIAN)Ca(THF)₃] ( 5 ). Compounds 1 — 5 have been characterized by C/H analyses, IR, ¹H NMR, and ¹³C NMR spectra, the structures of 2 , 3 , and 5 have been estimated by single crystal X‐ray diffraction.     

Influence of P‐Bonded Bulky Substituents on Electronic Interactions in Ferrocenyl‐Substituted Phospholes

2,5‐Diferrocenyl‐1‐Ar‐1H‐phospholes 3 a – e (Ar=phenyl ( a ), ferrocenyl ( b ), mesityl ( c ), 2,4,6‐triphenylphenyl ( d ), and 2,4,6‐tri‐tert‐butylphenyl ( e )) have been prepared by reactions of ArPH₂ ( 1 a – e ) with 1,4‐diferrocenyl butadiyne. Compounds 3 b – e have been structurally characterized by single‐crystal XRD analysis. Application of the sterically demanding 2,4,6‐tri‐tert‐butylphenyl group led to an increased flattening of the pyramidal phosphorus environment. The ferrocenyl units could be oxidized separately, with redox separations of 265 ( 3 b ), 295 ( 3 c ), 340 ( 3 d ), and 315 mV ( 3 e ) in [NnBu₄][B(C₆F₅)₄]; these values indicate substantial thermodynamic stability of the mixed‐valence radical cations. Monocationic [ 3 b ]⁺–[ 3 e ]⁺ show intervalence charge‐transfer absorptions between 4650 and 5050 cm^?1 of moderate intensity and half‐height bandwidth. Compounds 3 c – e with bulky, electron‐rich substituents reveal a significant increase in electronic interactions compared with less demanding groups in 3 a and 3 b .     

Axially Dissymmetric Chiral (R)‐N,W‐Bis(2‐hydroxy‐3,5‐ditert‐butyl‐arylmethyl)‐1, 1′‐binaphthalene‐2,2′‐diamine as Chiral Ligands in the Reaction of Diethylzinc to Aldehydes†

Chiral ligand (A)‐N,N′‐Bis(2‐hydroxy‐3,5‐di‐tert‐butyl‐arylmethyl)‐1,1′‐binaphthalene‐2,2′‐diamine derived from the reduction of Schiff base (R)‐2,2′‐bis (3,5‐di‐tert‐butyl‐2‐hydroxybenzylideneamino)‐1, 1′‐binaphthyl with LiAlH₄, is fairly effective in the asymmetric addition reaction of diethylzinc to aldehydes by which good yields (46%‐94%) of the corresponding sec‐alcohols can be obtained in moderate ee (51%‐79%) with R configuration for a variety of aldehydes.     

Monoaryloxo ytterbium(III) chlorides supported by β‐diketiminato ligands as novel initiators for the living ring‐opening polymerization of ε‐caprolactone

Ring‐opening polymerization of ε‐caprolactone (ε‐CL) was carried out using β‐diketiminato‐supported monoaryloxo ytterbium chlorides L¹Yb(OAr)Cl(THF) (1) [L¹ = N,N′‐bis(2,6‐dimethylphenyl)‐2,4‐pentanediiminato, OAr = 2,6‐di‐tert‐butylphenoxo‐], and L²Yb(OAr′)Cl(THF) (2) [L² = N,N′‐bis(2,6‐diisopropylphenyl)‐2,4‐pentanediiminato, OAr′ = 2,6‐di‐tert‐butyl‐4‐methylphenoxo‐], respectively, as single‐component initiator. The influence of reaction conditions, such as polymerization temperature, polymerization time, initiator, and initiator concentration, on the monomer conversion, molecular weight, and molecular weight distribution of the resulting polymers was investigated. Complex 1 was well characterized and its crystal structure was determined. Some features and kinetic behaviors of the CL polymerization initiated by these two complexes were studied. The polymerization rate is first order with respect to monomer. The M_n of the polymer increases linearly with the increase of the polymer yield, while polydispersity remained narrow and unchanged throughout the polymerization in a broad range of temperatures from 0 to 50 °C. The results indicated that the present system has a “living character”. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1147–1152, 2006     

Synthesis and properties of oligo(biradicals) composed of 1,3‐diphosphacyclobutane‐2,4‐diyl units and benzyl‐type linkers

We have succeeded in catenating two sterically encumbered 1,3‐di‐t‐butyl‐2,4‐bis(2,4,6‐tri‐t‐butylphenyl)‐1,3‐diphosphacyclobutane‐2,4‐diyl units with a spacer 1,2‐(CH₂)₂C₆H₄ to obtain bis(biradicals) as considerably stable compounds. We have discussed physicochemical properties of the dimer, together with DFT calculations of model compounds. Spectroscopic data, redox properties, and X‐ray structures of the oligo(biradicals) derivatives including other spacers like 1,3‐(CH₂)₂C₆H₄, 1,4‐(CH₂)₂C₆H₄, and 1,3,5‐(CH₂)₃C₆H₃, reveal that the P‐heterocyclic biradical moieties interact through nonconjugative pathways. These properties of oligo(biradicals) will facilitate to design novel molecular systems for electronics. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:404–411, 2010; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20625     

Synthesis and properties of fluorinated polyimides based on 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐2,5‐di‐tert‐butylbenzene and various aromatic dianhydrides

A novel fluorinated diamine monomer, 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐2,5‐di‐tert‐butylbenzene ( 2 ), was prepared through the nucleophilic substitution reaction of 2‐chloro‐5‐nitrobenzotrifluoride and 2,5‐di‐tert‐butylhydroquinone in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. Fluorinated polyimides ( 5a – 5f ) were synthesized from diamine 2 and various aromatic dianhydrides ( 3a – 3f ) via thermal or chemical imidization. These polymers had inherent viscosities of 0.77–1.01 dL/g. The 5 series polyimides were soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, and N,N‐dimethylformamide and were even soluble in dioxane, tetrahydrofuran, and dichloromethane. 5 (C) showed cutoff wavelengths between 363 and 404 nm and yellowness index (b*) values of 6.5–40.2. The polyimide films had tensile strengths of 93–114 MPa, elongations to break of 9–12%, and initial moduli of 1.7–2.1 GPa. The glass‐transition temperatures were 255–288 °C. The temperatures of 10% weight loss were all above 460 °C in air or nitrogen atmospheres. In comparison with a nonfluorinated polyimide series based on 1,4‐bis(4‐aminophenoxy)‐2,5‐di‐tert‐butylbenzene, the 5 series showed better solubility and lower color intensity, dielectric constants, and moisture absorption. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2272–2284, 2004     

Coordination Behavior of Sterically Protected Phosphaalkenes on the AuCl Moiety Leading to Catalytic 1,6‐Enyne Cycloisomerization

Mes*‐substituted 2,3‐dimethyl‐1,4‐diphosphabuta‐1,3‐diene, 1,2‐diphenyl‐3,4‐diphosphinidenecyclobutene, 2,2‐bis(methylsulfanyl)‐1‐phosphaethene, and 3,3‐diphenyl‐1,3‐diphosphapropenes (Mes*=2,4,6‐tri‐tert‐butylphenyl) were employed as P ligands of gold(I) complexes. The (E,E)‐2,3‐dimethyl‐1,4‐diphosphabuta‐1,3‐diene functioned as a P2 ligand for digold(I) complex formation with or without intramolecular Au–Au contact, which depends on the conformation of the 1,3‐diphosphabuta‐1,3‐diene. The 1,2‐diphenyl‐3,4‐diphosphinidenecyclobutene, which has a rigid s‐cis P?C? C?P skeleton, afforded the corresponding digold(I) complexes with a slight distortion of the planar diphosphinidenecyclobutene framework and intramolecular Au–Au contact. In the case of the 2,2‐bis(methylsulfanyl)‐1‐phosphaethene, only the phosphorus atom coordinated to gold, and the sulfur atom showed almost no intra‐ or intermolecular coordination to gold. On the other hand, the 1,3‐diphosphapropenes behaved as nonequivalent P2 ligands to afford the corresponding mono‐ and digold(I) complexes. Some phosphaalkene–gold(I) complexes showed catalytic activity for 1,6‐enyne cycloisomerization without cocatalysts such as silver hexafluoroantimonate.     

A Boryl‐Substituted Diphosphene: Synthesis,Structure, and Reaction with n‐Butyllithium To Form a Stabilized Adduct by pπ‐pπ Interaction

A boryl‐substituted diphosphene was synthesized through the nucleophilic borylation of PCl₃ with a borylzinc reagent, followed by a reduction with Mg. A combined analysis of the resulting diboryldiphosphene by single‐crystal X‐ray diffraction, DFT calculations, and UV/Vis spectroscopy revealed a σ‐electron‐donating effect for the boryl substituent that was slightly weaker than that of the 2,4,6‐tri‐tert‐butylphenyl (Mes*) ligand. The reaction of this diboryldiphosphene with ⁿBuLi afforded a boryl‐substituted phosphinophosphide that was, in comparison with the thermally unstable Mes*‐substituted diaryldiphosphene, stabilized by a π‐electron‐accepting effect of the boryl substituent.     

Enhanced redox stability and electrochromic properties of aromatic polyamides based on N,N‐bis(4‐carboxyphenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine

A new bis(triphenylamine)‐type dicarboxylic acid monomer, N,N‐bis(4‐carboxyphenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine, was prepared by a well‐established procedure and led to a new family of redox‐active aromatic polyamides with di‐tert‐butyl‐substituted N,N,N′,N′‐tetraphenylphenylenediamine (TPPA) segments. The resulting polyamides were amorphous with good solubility in many organic solvents, and most of them could be solution cast into flexible polymer films. The polyamides exhibited high thermal stability with glass‐transition temperatures in the range of 247–293 °C and 10% weight‐loss temperatures in excess of 500 °C. They showed well‐defined and reversible redox couples during oxidative scanning, with a strong color change from a colorless or pale yellowish neutral form to green and blue oxidized forms. They had enhanced redox stability and electrochromic performance when compared with the corresponding analogs without tert‐butyl substituents on the TPPA unit. The polyamide with TPPA units in both the diacid and diamine components shows multicolored electrochromic behavior. A polyamide containing both the cathodic coloring anthraquinone chromophore and the anodic coloring TPPA chromophore has the ability to show red, green, and blue states, toward single‐component RGB electrochromics. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Highly Electron‐Deficient and Air‐Stable Conjugated Thienylboranes

Introduced herein is a series of conjugated thienylboranes, which are inert to air and moisture, and even resist acids and strong bases. X‐ray analyses reveal a coplanar arrangement of the thiophene rings, an arrangement which facilitates p–π conjugation through the boron atoms despite the presence of highly bulky 2,4,6‐tri‐tert‐butylphenyl (Mes*) or 2,4,6‐tris(trifluoromethyl)phenyl (^FMes) groups. Short B???F contacts, which lead to a pseudotrigonal bipyramidal geometry in the ^FMes species, have been further studied by DFT and AIM analysis. In contrast to the Mes* groups, the highly electron‐withdrawing ^FMes groups do not diminish the Lewis acidity of boron toward F^? anions. These compounds can be lithiated or iodinated under electrophilic conditions without decomposition, thus offering a promising route to larger conjugated structures with electron‐acceptor character.     

A Boryl‐Substituted Diphosphene: Synthesis,Structure, and Reaction with n‐Butyllithium To Form a Stabilized Adduct by pπ‐pπ Interaction

A boryl‐substituted diphosphene was synthesized through the nucleophilic borylation of PCl₃ with a borylzinc reagent, followed by a reduction with Mg. A combined analysis of the resulting diboryldiphosphene by single‐crystal X‐ray diffraction, DFT calculations, and UV/Vis spectroscopy revealed a σ‐electron‐donating effect for the boryl substituent that was slightly weaker than that of the 2,4,6‐tri‐tert‐butylphenyl (Mes*) ligand. The reaction of this diboryldiphosphene with ⁿBuLi afforded a boryl‐substituted phosphinophosphide that was, in comparison with the thermally unstable Mes*‐substituted diaryldiphosphene, stabilized by a π‐electron‐accepting effect of the boryl substituent.     

Amino‐ und halogenfunktionelle Siloxititane

Amino‐ and halofunctional Siloxititanes Amino‐di‐tert‐butylsilanol reacts with tetrabutoxititane in a molar ratio of 2:1 to give di‐n‐butoxi(bis(di‐tert‐butyl‐n‐butoxi)siloxi)titane, (C₄H₉OSi(CMe₃)₂‐O)₂Ti(OC₄H₉)₂ ( 1 ), and lithium‐di‐tert‐butylchlorosilanolate in a molar ratio of 3:1 to give n‐butoxi(tris(di‐tert‐butyl‐n‐butoxi)siloxi)titane, (H₉C₄OSi(CMe₃)₂‐O)₃TiOC₄H₉ ( 2 ). The amino‐di‐tert‐butylsilanol substitutes the four chloroatoms of TiCl₄ in the presence of triethylamine as HCl‐acceptor. The tetrakis(amino‐di‐tert‐butyl)siloxititane ( 3 ) is formed. The lithium salt of di‐tert‐butylfluorosilanol reacts with TiCl₄ in a molar ratio of 2:1 to give 1, 1, 3, 3‐tetra‐tert‐butyl‐1‐fluoro‐3‐trichlorotitoxi‐1, 3‐disiloxane, FSi(CMe₃)₂‐O‐Si(CMe₃)₂‐O‐TiCl₃ ( 4 ). In the reaction of di‐tert‐butyl‐chlorosilanol and TiCl₄, the anion [chlorosiloxi‐octa(tri‐μ²‐chlorotitanate)]^— ( 5 ) with protonated diethylether as counterion is obtained by using diethylether as HCl‐acceptor. The crystal structure determinations of 3 and 5 are reported.     

NMR analysis of a series of 1,2‐bis(1‐R‐5‐oxo‐2,3‐dihydro‐1H‐pyrrol‐4‐ylidene)ethanes and X‐ray crystal structure analysis of the R = mesityl compound

Four tetramethyl 4,4′‐(ethane‐1,2‐diylidene)bis[1‐R‐5‐oxo‐4,5‐dihydro‐1H‐pyrrole‐2,3‐dicarboxylate] compounds, denoted class (1), are a series of conjugated buta‐1,3‐dienes substituted with a heterocyclic group. The compounds can be used as dyes and pigments due to their long‐range conjugated systems. Four structures were studied using ¹H NMR, ¹³C NMR and mass spectroscopy, viz. with R = 2,4,6‐trimethylphenyl, (1a), R = cyclohexyl, (1b), R = tert‐butyl, (1c), and R = isopropyl, (1d). A detailed discussion is presented regarding the characteristics of the three‐dimensional structures based on NMR analysis and the X‐ray crystal structure of (1a), namely tetramethyl 4,4′‐(ethane‐1,2‐diylidene)bis[5‐oxo‐1‐(2,4,6‐trimethylphenyl)‐4,5‐dihydro‐1H‐pyrrole‐2,3‐dicarboxylate], C₃₆H₃₆N₂O₁₀. The conjugation plane and stability were also studied via quantum chemical calculations.     

Intramolecular C?H Activation through Gold(I)‐Catalyzed Reaction of Iodoalkynes

The cycloisomerization reaction of 1‐(iodoethynyl)‐2‐(1‐methoxyalkyl)arenes and related 2‐alkyl‐substituted derivatives gives the corresponding 3‐iodo‐1‐substituted‐1H‐indene under the catalytic influence of IPrAuNTf₂ [IPr=1,3‐bis(2,6‐diisopropyl)phenylimidazol‐2‐ylidene; NTf₂=bis(trifluoromethanesulfonyl)imidate]. The reaction takes place in 1,2‐dichloroethane at 80 °C, and the addition of ttbp (2,4,6‐tri‐tert‐butylpyrimidine) is beneficial to accomplish this new transformation in high yield. The overall reaction implies initial assembly of an intermediate gold vinylidene upon alkyne activation by gold(I) and a 1,2‐iodine‐shift. Deuterium labeling and crossover experiments, the magnitude of the recorded kinetic primary isotopic effect, and the results obtained from the reaction of selected stereochemical probes strongly provide support for concerted insertion of the benzylic C H bond into gold vinylidene as the step responsible for the formation of the new carbon–carbon bond.     

Alternating copolymerization of carbon dioxide and propylene oxide catalyzed by (R,R)‐SalenCoIII‐ (2,4‐dinitrophenoxy) and Lewis‐basic cocatalyst

A binary catalyst system of a chiral (R,R)‐SalenCo^III(2,4‐dinitrophenoxy) (salen = N,N‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐diphenylethylenediimine) in conjunction with (4‐dimethylamino)pyridine (DMAP) was developed to generate the copolymerization of carbon dioxide (CO₂) and racemic propylene oxide (rac‐PO). The influence of the molar ratio of catalyst components, the operating temperature, and reaction pressure on the yield as well as the molecular weight of polycarbonate were systematically investigated. High yield of turnover frequency (TOF) 501.2 h^?1 and high molecular weight of 70,400 were achieved at an appropriate combination of all variables. The structures of as‐prepared products were characterized by the IR, ¹H NMR, ¹³C NMR measurements. The linear carbonate linkage, highly regionselectivity and almost 100% carbonate content of the resulting polycarbonate were obtained with the help of these effective catalyst systems under facile conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5050–5056, 2007     

Highly efficient blue organic light-emitting diodes based on 2-(diphenylamino)fluoren-7-ylvinylarene derivatives that bear a tert-butyl group

Blue fluorescent materials with a 2‐(diphenylamino)fluoren‐7‐ylvinylarene emitting unit and tert‐butyl‐based blocking units were synthesized. The photophysical properties of these materials, including UV/Vis absorption, photoluminescent properties, and HOMO–LUMO energy levels, were characterized and rationalized with quantum‐mechanical DFT calculations. The electroluminescent properties of these molecules were examined through the fabrication of multilayer devices with a structure of indium–tin oxide, 4,4′‐bis{N‐[4‐(N,N‐di‐m‐tolylamino)phenyl]‐N‐phenylamino}biphenyl, 4′‐bis[N‐(1‐naphthyl)‐N‐phenylamino]biphenyl, and blue materials doped in 2‐methyl‐9,10‐di(2‐naphthyl)anthracene/tris(8‐quinolinolato)aluminum/LiF/Al. All devices exhibit highly efficient blue electroluminescence with high external quantum efficiency (3.20–7.72 % at 20 mA cm^?2). A deep‐blue device with Commission Internationale de l’Eclairage (CIE) coordinates of (0.15, 0.11) that uses 7‐[2‐(3′,5′‐di‐tert‐butylbiphenyl‐4‐yl)vinyl]‐9,9‐diethyl‐2‐N‐(3,5‐di‐tert‐butylphenyl)‐2,4‐difluorobenzenamino‐9H‐fluorene as a dopant in the emitting layer showed a luminous efficiency and external quantum efficiency of 3.95 cd A^?1 and 4.23 % at 20 mA cm^?2, respectively. Furthermore, a highly efficient sky‐blue device that uses the dopant 7‐{2‐[2‐(3,5‐di‐tert‐butylphenyl)‐9,9′‐spirobifluorene‐7‐yl]vinyl}‐9,9‐diethyl‐2‐N,N‐diphenylamino‐9H‐fluorene exhibited a luminous efficiency and high quantum efficiency of 10.3 cd A^?1 and 7.7 % at 20 mA cm^?2, respectively, with CIE coordinates of (0.15, 0.20).