Spectroscopic characterization of the oxo-transfer reaction from a bis(mu-oxo)dicopper(III) complex to triphenylphosphine

The oxygen-atom transfer reaction from the bis(mu-oxo)dicopper(III) complex [Cu(III)(2)(mu-O)(2)(L)(2)](2+), where L =N,N,N',N' -tetraethylethylenediamine, to PPh(3) has been studied by UV-vis, EPR, (1)H NMR and Cu K-edge X-ray absorption spectroscopy in parallel at low temperatures (193 K) and above. Under aerobic conditions (excess dioxygen), 1 reacted with PPh(3), giving O=Ph(3) and a diamagnetic species that has been assigned to an oxo-bridged dicopper(II) complex on the basis of EPR and Cu K-edge X-ray absorption spectroscopic data. Isotope-labeling experiments ((18)O(2)) established that the oxygen atom incorporated into the triphenylphosphine oxide came from both complex 1 and exogenous dioxygen. Detailed kinetic studies revealed that the process is a third-order reaction; the rate law is first order in both complex 1 and triphenylphosphine, as well as in dioxygen. At temperatures above 233 K, reaction of 1 with PPh(3) was accompanied by ligand degradation, leading to oxidative N-dealkylation of one of the ethyl groups. By contrast, when the reaction was performed in the absence of excess dioxygen, negligible substrate (PPh(3)) oxidation was observed. Instead, highly symmetrical copper complexes with a characteristic isotropic EPR signal at g= 2.11 were formed. These results are discussed in terms of parallel reaction channels that are activated under various conditions of temperature and dioxygen.     

Two new terpyridine dimanganese complexes: a manganese(III,III) complex with a single unsupported oxo bridge and a manganese(III,IV) complex with a dioxo bridge. Synthesis, structure, and redox properties

Two new terpyridine dimanganese oxo complexes [Mn(2)(III,IV)(mu-O)(2)(terpy)(2)(CF(3)CO(2))(2)](+) (3) and [Mn(2)(III,III)(mu-O)(terpy)(2)(CF(3)CO(2))(4)] (4) (terpy = 2,2':6,2' '-terpyridine) have been synthesized and their X-ray structures determined. In contrast to the corresponding mixed-valent aqua complex [Mn(2)(III,IV)(mu-O)(2)(terpy)(2)(H(2)O)(2)](3+) (1), the two Mn atoms in 3 are not crystallographically equivalent. The neutral binuclear monooxo manganese(III,III) complex 4 exhibits two crystallographic forms having cis and trans configurations. In the cis complex, the two CF(3)CO(2)(-) ligands on each manganese adopt a cis geometry to each other; one CF(3)CO(2)(-) is trans to the oxygen of the oxo bridge while the second is cis. In the trans complex, the two coordinated CF(3)CO(2)(-) have a trans geometry to each other and are cis to the oxo bridge. The electrochemical behavior of 3 in organic medium (CH(3)CN) shows that this complex could be oxidized into its corresponding stable manganese(IV,IV) species while its reduced form manganese(III,III) is very unstable and leads by a disproportionation process to Mn(II) and Mn(IV) complexes. Complex 4 is only stable in the solid state, and it disproportionates spontaneously in CH(3)CN solution into the mixed-valent complex 3 and the mononuclear complex [Mn(II)(terpy)(2)](2+) (2), thereby preventing the observation of its electrochemical behavior.     

Reactivity of molecular dioxygen towards a series of isostructural dichloroiron(III) complexes with tripodal tetraamine ligands: general access to mu-oxodiiron(III) complexes and effect of alpha-fluorination on the reaction kinetics

We have synthesized the mono, di-, and tri-alpha-fluoro ligands in the tris(2-pyridylmethyl)amine (TPA) series, namely, FTPA, F(2)TPA and F(3)TPA, respectively. Fluorination at the alpha-position of these nitrogen-containing tripods shifts the oxidation potential of the ligand by 45-70 mV per added fluorine atom. The crystal structures of the dichloroiron(II) complexes with FTPA and F(2)TPA reveal that the iron center lies in a distorted octahedral geometry comparable to that already found in TPAFeCl(2). All spectroscopic data indicate that the geometry is retained in solution. These three isostructural complexes all react with molecular dioxygen to yield stable mu-oxodiiron(III) complexes. Crystal structure analyses are reported for each of these three mu-oxo compounds. With TPA, a symmetrical structure is obtained for a dicationic compound with the tripod coordinated in the kappa(4)N coordination mode. With FTPA, the compound is a neutral mu-oxodiiron(III) complex with a kappa(3)N coordination mode of the ligand. Oxygenation of the F(2)TPA complex gave a neutral unsymmetrical compound, the structure of which is reminiscent of that already found with the trifluorinated ligand. On reduction, all mu-oxodiiron(III) complexes revert to the starting iron(II) species. The oxygenation reaction parallels the well-known formation of mu-oxo derivatives from dioxygen in the chemistry of porphyrins reported almost three decades ago. The striking feature of the series of iron(II) precursors is the effect of the ligand on the kinetics of oxygenation of the complexes. Whereas the parent complex undergoes 90 % conversion over 40 h, the monofluorinated ligand provides a complex that has fully reacted after 30 h, whereas the reaction time for the complex with the difluorinated ligand is only 10 h. Analysis of the spectroscopic data reveals that formation of the mu-oxo complexes proceeds in two distinct reversible kinetic steps with k(1) approximately 10 k(2). For TPAFeCl(2) and FTPAFeCl(2) only small variations in the k(1) and k(2) values are observed. By contrast, F(2)TPAFeCl(2) exhibits k(1) and k(2) values that are ten times higher. These differences in kinetics are interpreted in the light of structural and electronic effects, especially the Lewis acidity at the metal center. Our results suggest coordination of dioxygen as an initial step in the process leading to formation of mu-oxodiiron(III) compounds, by contrast with an unlikely outer-sphere reduction of dioxygen, which generally occurs at negative potentials.     

mer-[Fe III(bpca)(CN)3]-: a new low-spin iron(III) complex to build heterometallic ladder-like chains

The novel mononuclear complex PPh(4)-mer-[Fe(III)(bpca)(3)(CN)(3)].H(2)O (1) [PPh(4)(+) = tetraphenylphosphonium cation and bpca = bis(2-pyridylcarbonyl)amidate anion] and ladder-like chain compound [[Fe(III)(bpca)(micro-CN)(3)Mn(II)(H(2)O)(3)] [Fe(III)(bpca)(CN)(3)]].3H(2)O (2) have been prepared and characterized by X-ray diffraction analysis. Compound 1 is a low-spin iron(III) compound with three cyanide ligands in mer arrangement and a tridentate N-donor ligand building a distorted octahedral environment around the iron atom. Compound 2 is an ionic salt made up of cationic ladder-like chains [[Fe(III)(bpca)(micro-CN)(3)Mn(II)(H(2)O)(3)]](+) and uncoordinated anions [Fe(III)(bpca)(3)(CN)(3)](-). The magnetic properties of 2 correspond to those of a ferrimagnetic chain with significant intrachain antiferromagnetic coupling between the low-spin iron(III) centers and the high-spin manganese(II) cations. This compound exhibits ferrimagnetic ordering below 2.0 K.     

Water oxidation catalyzed by the tetranuclear Mn complex [Mn(IV)4O5(terpy)4(H2O)2](ClO4)6

The tetranuclear manganese complex [Mn(IV)(4)O(5)(terpy)(4)(H(2)O)(2)](ClO(4))(6) (1; terpy = 2,2':6',2″-terpyridine) gives catalytic water oxidation in aqueous solution, as determined by electrochemistry and GC-MS. Complex 1 also exhibits catalytic water oxidation when adsorbed on kaolin clay, with Ce(IV) as the primary oxidant. The redox intermediates of complex 1 adsorbed on kaolin clay upon addition of Ce(IV) have been characterized by using diffuse reflectance UV/visible and EPR spectroscopy. One of the products in the reaction on kaolin clay is Mn(III), as determined by parallel-mode EPR spectroscopic studies. When 1 is oxidized in aqueous solution with Ce(IV), the reaction intermediates are unstable and decompose to form Mn(II), detected by EPR spectroscopy, and MnO(2). DFT calculations show that the oxygen in the mono-μ-oxo bridge, rather than Mn(IV), is oxidized after an electron is removed from the Mn(IV,IV,IV,IV) tetramer. On the basis of the calculations, the formation of O(2) is proposed to occur by reaction of water with an electrophilic manganese-bound oxyl radical species, (?)O-Mn(2)(IV/IV), produced during the oxidation of the tetramer. This study demonstrates that [Mn(IV)(4)O(5)(terpy)(4)(H(2)O)(2)](ClO(4))(6) may be relevant for understanding the role of the Mn tetramer in photosystem II.     

Slow magnetic relaxation in a mixed-valence Mn(II/III) Complex: [MnII2(bispicen)2(mu 3-Cl)2Mn(III)(Cl4Cat)2Mn(III)(Cl4Cat)2(H2O)2] infinity

A layered mixed-valence manganese complex, [Mn(II)(2)(bispicen)(2)(mu(3)-Cl)(2)Mn(III)(Cl(4)Cat)(2)Mn(III)(Cl(4)Cat)(2)(H(2)O)(2)](infinity), is synthesized and characterized structurally. It displays a slow magnetic relaxation and hysteresis effect.     

Synthesis and structural characterization of manganese(III,IV) and ruthenium(III) complexes derived from 2-hydroxy-1-naphthaldehydebenzoylhydrazone

Reaction of 2-hydroxy-1-naphthaldehydebenzoylhydrazone(napbhH₂) with manganese(II) acetate tetrahydrate and manganese(III) acetate dihydrate in methanol followed by addition of methanolic KOH in molar ratio (2 : 1 : 10) results in [Mn(IV)(napbh)₂] and [Mn(III)(napbh)(OH)(H₂O)], respectively. Activated ruthenium(III) chloride reacts with napbhH₂ in methanolic medium yielding [Ru(III)(napbhH)Cl(H₂O)]Cl. Replacement of aquo ligand by heterocyclic nitrogen donor in this complex has been observed when the reaction is carried out in presence of pyridine(py), 3-picoline(3-pic) or 4-picoline(4-pic). The molar conductance values in DMF (N,N-dimethyl formamide) of these complexes suggest non-electrolytic and 1 : 1 electrolytic nature for manganese and ruthenium complexes, respectively. Magnetic moment values of manganese complexes suggest Mn(III) and Mn(IV), however, ruthenium complexes are paramagnetic with one unpaired electron suggesting Ru(III). Electronic spectral studies suggest six coordinate metal ions in these complexes. IR spectra reveal that napbhH₂ coordinates in enol-form and keto-form to manganese and ruthenium metal ions in its complexes, respectively. ESR studies of the complexes are also reported.     

Topologically constrained manganese(III) and iron(III) complexes of two cross-bridged tetraazamacrocycles

A family of Mn3+ and Fe3+ complexes of 4,11-dimethyl-1,4,8,11-tetraazabicyclo[6.6.2]hexadecane (1) and 4,10-dimethyl-1,4,7,10-tetraazabicyclo[5.5.2]tetradecane (2) has been prepared by the chemical oxidation of the divalent manganese and iron analogues. The ligands are ethylene cross-bridged tetraazamacrocycles derived from cylam and cyclen, respectively. The synthesis and characterization of these complexes, including X-ray crystal structure determinations, are described. The structural evidence demonstrates that the tetradentate ligands enforce distorted octahedral geometries on the metal ions, with two cis sites occupied by labile ligands. Magnetic measurements reveal that the complexes are high spin with typical magnetic moments. Cyclic voltammetry shows reversible redox processes for the Fe3+/Fe2+ couples of the iron(III) complexes, while Mn3+/Mn2+ and Mn4+/Mn3+ couples were observed for the complexes with manganese(III). The manganese chemistry of 1 was studied in depth. The dichloro manganese(III) cation of 1 undergoes facile ligand substitution reactions at the labile, monodentate sites, for example substituting azide for chloride ligands. Air oxidation of the dichloro complex of Mn (1)2+ in basic solution does not give the expected mu-oxo dimeric product common to manganese. Instead, an unusual manganese(III)-OH complex has been isolated from this reaction and structurally characterized. A similar reaction under slightly different conditions gives a putative MnIII(OH)2 complex that metathesizes to MnIII(OMe)2 upon recrystallization from methanol.     

Hydrothermal synthesis and magnetic properties of novel Mn(II) and Zn(II) materials with thiolato-carboxylate donor ligand frameworks

The hydrothermal reaction of thiosalicylic acid, (C(6)H(4)(CO(2)H)(SH)-1,2) with manganese(III) acetate leads to formation of the coordination solid [Mn(5)((C(6)H(4)(CO(2))(S)-1,2)(2))(4)(mu3-OH)2] (1) via a redox reaction, where resulting manganese(II) centres are coordinated by oxygen donor atoms and S-S disulfide bridge formation is simultaneously observed. Reaction of the same ligand under similar conditions with zinc(II) chloride yields the layered coordination solid [Zn(C(6)H(4)(CO(2))(S)-1,2)] (2). Hydrothermal treatment of manganese(III) acetate with 2-mercaptonicotinic acid, (NC(5)H(3)(SH)(CO(2)H)-2,3) was found to produce the 1-dimensional chain structure [Mn(2)((NC(5)H(3)(S)(CO(2))-2,3)(2))(2)(OH(2))(4)].4H(2)O (3) which also exhibits disulfide bridge formation and oxygen-only metal interactions. Compound 3 has been studied by thermogravimetric analysis and indicates sequential loss of lattice and coordinated water, prior to more comprehensive ligand fragmentation at elevated temperatures. The magnetic behaviour of 1 and 3 has been investigated and both exhibit antiferromagnetic interactions. The magnetic behaviour of 1 has been modelled as two corner-sharing isosceles triangles whilst 3 has been modelled as a 1-dimensional chain.     

Reductive nitrosylation and proton-assisted bridge splitting of a (mu-oxo)dimanganese(III) complex derived from a polypyridine ligand with one carboxamide group

Aerobic oxidation of the Mn(II) complex [Mn(Papy3)(H2O)](ClO4) (1, PaPy3- is the anion of the designed ligand N,N-bis(2-pyridylmethyl)amine-N-ethyl-2-pyridine-2-carboxamide) in acetonitrile affords the (mu-oxo)dimanganese(III) complex [(Mn(PaPy3))2(mu-O)](ClO4)2 (3) in high yield. The unsupported single oxo bridge between the two high-spin Mn(III) centers in 3 is readily cleaved upon addition of proton sources such as phenol, acetic acid, and benzoic acid, and complexes of the type [Mn(PaPy3)(L)](ClO4) (5, L = PhO-; 6, L = AcO-; 7, L = BzO-) are formed. The basicity of the bridge is evident by the fact that simple addition of methanol to a solution of 3 in acetonitrile affords the methoxide complex [Mn(PaPy3)(OMe)](ClO4) (4). The structures of 3-5 and 7 have been determined. Passage of NO through a solution of 3 in acetonitrile produces the [Mn-NO]6 nitrosyl [Mn(PaPy3)(NO)](ClO4) (2) via reductive nitrosylation. Complexes 4-7 also afford the [Mn-NO]6 nitrosyl 2 upon reaction with NO. In the latter case, the anionic O-based ligands (such as MeO- and PhO-) act as built-in bases and promote reductive nitrosylation of the Mn(III) complexes.     

Anion-controlled assembly of four manganese ions: structural, magnetic, and electrochemical properties of tetramanganese complexes stabilized by xanthene-bridged Schiff base ligands

The reaction of manganese(II) acetate with a xanthene-bridged bis[3-(salicylideneamino)-1-propanol] ligand, H(4)L, afforded the tetramanganese(II,II,III,III) complex [Mn(4)(L)(2)(μ-OAc)(2)], which has an incomplete double-cubane structure. The corresponding reaction using manganese(II) chloride in the presence of a base gave the tetramanganese(III,III,III,III) complex [Mn(4)(L)(2)Cl(3)(μ(4)-Cl)(OH(2))], in which four Mn ions are bridged by a Cl(-) ion. A pair of L ligands has a propensity to incorporate four Mn ions, the arrangement and oxidation states of which are dependent on the coexistent anions.     

Synthesis, characterization, and solution properties of a novel cross-bridged cyclam manganese(IV) complex having two terminal hydroxo ligands

A novel monomeric tetravalent manganese complex with the cross-bridged cyclam ligand 4,11-dimethyl-1,4,8,11-tetraazabicyclo[6.6.2]hexadecane (Me2EBC), [Mn(IV)(Me2EBC)(OH)2](PF6)2, was synthesized by oxidation of Mn(II)(Me2EBC)Cl2 with H2O2 in the presence of NH4PF6)in aqueous solution. The X-ray crystal structure determination of this manganese(IV) compound revealed that it contains two rare terminal hydroxo ligands. EPR studies in dry acetonitrile at 77 K show two broad resonances at g = 1.96 and 3.41, indicating that the manganese(IV) exists as a high-spin d3 species. Resonance Raman (rR) spectra of this manganese(IV) species reveal that the dihydroxy moiety, Mn(IV)(OH)2, is also the dominant species in aqueous solution (pH < 7). pH titration provides two pK(a) values, 6.86(4) and 10.0(1), associated with stepwise removal of the last two oxygen-bound protons from [Mn(IV)(Me2EBC)(OH)2](2+). The cyclic voltammetry of this manganese(IV) complex in dry acetonitrile at 298 K demonstrates two reversible redox processes at +0.756 and -0.696 V (versus SHE) for the Mn4+/Mn3+ and Mn3+/Mn2+ couples, respectively. This manganese(IV) complex is relatively stable in weak acidic aqueous solution but easily degrades in basic solution to manganese(III) derivatives with an 88 +/- 1% yield.     

Copper-dioxygen adducts and the side-on peroxo dicopper(II)/bis(mu-oxo) dicopper(III) equilibrium: Significant ligand electronic effects

The variation of ligand para substituents on pyridyl donor groups of tridentate amine copper(I) complexes was carried out in order to probe electronic effects on the equilibrium between mu-eta2:eta2-(side-on)-peroxo [Cu(II)2(O2(2-))]2+ and bis(mu-oxo) [Cu(III)2(O(2-))2] species formed upon reaction with O2. [Cu(I)(R-PYAN)(MeCN)n]B(C6F5)4 (R-PYAN = N-[2-(4-R-pyridin-2-yl)-ethyl]-N,N',N'-trimethyl-propane-1,3-diamine, R = NMe2, OMe, H, and Cl) (1R) vary over a narrow range in their Cu(II)/Cu(I) redox potentials (E(1/2) vs Fe(cp)2(+/0) = -0.40 V for 1(NMe2), -0.38 V for 1(OMe), -0.33 V for 1H, and -0.32 V for 1Cl) and in C-O stretching frequencies of their carbonyl adducts, 1R-CO: nu(C-O) = 2080, 2086, 2088, and 2090 cm(-1) for R = NMe2, OMe, H, and Cl, respectively. However, within this range of electronic properties for 1R, dioxygen reactivity is significantly affected. The reaction of 1Cl or 1H with O2 at -78 degrees C in CH2Cl2 gives UV-vis and resonance Raman spectra indicative of a mu-eta2:eta2-(side-on)-peroxo dicopper(II) adduct (2R). Compound 1(OMe) reacts with O2, yielding equilibrium mixtures of side-on peroxo (2(OMe)) and bis(mu-oxo) (3(OMe)) species. Oxygenation of 1(NMe2) leads to the sole generation of the bis(mu-oxo) dicopper(III) complex (3(NMe2)). A solvent effect was also observed; in acetone or THF, increased ratios of bis(mu-oxo) relative to side-on peroxo complex are observed. Thus, the equilibrium between a dicopper side-on peroxo and bis(mu-oxo) species can be tuned by ligand design-specifically, more electron donating ligands favor the formation of the latter isomer, and the peroxo/bis(mu-oxo) equilibrium can be shifted from one extreme to the other within the same ligand system. Observations concerning the reactivity of the dioxygen adducts 2H and 3(NMe2) toward external substrates are also presented.     

Dioxygen binding to complexes with Fe(II)2(mu-OH)2 cores: steric control of activation barriers and O2-adduct formation

A series of complexes with [Fe(II)(2)(mu-OH)(2)] cores has been synthesized with N3 and N4 ligands and structurally characterized to serve as models for nonheme diiron(II) sites in enzymes that bind and activate O(2). These complexes react with O(2) in solution via bimolecular rate-limiting steps that differ in rate by 10(3)-fold, depending on ligand denticity and steric hindrance near the diiron center. Low-temperature trapping of a (mu-oxo)(mu-1,2-peroxo)diiron(III) intermediate after O(2) binding requires sufficient steric hindrance around the diiron center and the loss of a proton (presumably that of a hydroxo bridge or a yet unobserved hydroperoxo intermediate). The relative stability of these and other (mu-1,2-peroxo)diiron(III) intermediates suggests that these species may not be on the direct pathway for dioxygen activation.     

Studies of a dinuclear manganese complex with phenoxo and bis-acetato bridging in the Mn2(II,II) and Mn2(II,III) states: Coordination structural shifts and oxidation state control in bridged dinuclear complexes

The dinucleating ligand, 2,6-bis{[(2-(2-pyridyl)ethyl)(2-pyridylmethyl)-amino]-methyl}-4-methylphenol) (L1OH) reacts with Mn(ClO4)2.6H2O to form the dinuclear complex [Mn2(II,II)(L1O)(mu-OOCCH3)2]ClO4 (1). The electrolytic oxidation of 1 at 0.7 V (vs Ag/AgCl) produces the mixed valent complex [Mn2(II,III)(L1O)(mu-OOCCH3)2](ClO4)2 (1ox) quantitatively, while electrolysis at 0.20 V converts 1ox back to 1. X-ray crystallographic structures show that both 1 and 1ox are dinuclear complexes in which the two manganese ions are each in distorted octahedral coordination environments bridged by the phenoxo oxygen and two acetate ions. The structural changes that occur upon the oxidation 1 to 1ox suggest an extended pi-bonding system involving the phenoxo ring C-O(phenoxo)-Mn(II)-N(pyridyl) chain. In addition, as 1 is oxidized to 1ox, the rearrangements in the coordination sphere resulting from the oxidation of one Mn(II) ion to Mn(III) are transmitted via the bridging Mn-O(phenoxo) bonds and cause structural changes that render the site of the second manganese ion unfit for the +3 state and hence unstable to reduction. Thus the electrolytic oxidation of 1ox in acetonitrile at 1.20 V takes up slightly greater than 1 F of charge/mol of 1ox, but the starting complex, 1ox, is recovered, showing the instability of the Mn2(III,III) state that is formed with respect to reduction to 1ox. Variable-temperature magnetic susceptibility measurements of 1 and 1ox over the temperature range from 1.8 to 300 K can be modeled with magnetic coupling constants J = -4.3 and -4.1 cm(-1), respectively showing the weak antiferromagnetic coupling between the two manganese ions in each dinuclear complex, which is commonly observed among similar phenoxo- and bis-1,3-carboxylato-bridged dinuclear Mn2(II,II) and Mn2(II,III) complexes.     

Self-assembled decanuclear Na(I)2Mn(II)4Mn(III)4 complexes: from discrete clusters to 1-D and 2-D structures, with the Mn(II)4Mn(III)4 unit displaying a large spin ground state and probable SMM behaviour

The synthesis, magnetic characterization and X-ray crystal structures are reported for five new manganese compounds, [Mn(III)(teaH(2))(sal)]·(1/2)H(2)O (1), [Na(I)(2)Mn(II)(4)Mn(III)(4)(teaH)(6)(sal)(4)(N(3))(2)(MeOH)(4)]·6MeOH (2), [Na(I)(2)Mn(II)(4)Mn(III)(4)(teaH)(6)(sal)(4)(N(3))(2)(MeOH)(2)](n)·7MeOH (3), [Na(I)(2)Mn(II)(4)Mn(III)(4)(teaH)(6)(sal)(4)(N(3))(2)(MeOH)(2)](n)·2MeOH·Et(2)O (4) and [K(I)(2)Mn(II)(4)Mn(III)(4)(teaH)(6)(sal)(4)(N(3))(2)(H(2)O)(2)](n)·5MeOH (5). Complex 1 is a mononuclear compound, formed via the reaction of Mn(NO(3))(2)·4H(2)O, triethanolamine (teaH(3)) and salicylic acid (salH(2)) in a basic methanolic solution. Compound 2 is a mixed-valent hetero-metallic cluster made up of a Mn(8)Na(2) decanuclear core and is formed via the reaction of sodium azide (NaN(3)) with 1. Compounds 3-5 are isolated as 1- or 2-D coordination polymers, each containing the decanuclear Mn(8)M(2) (M = Na(+) or K(+)) core building block as the repeating unit. Compound 3 is isolated when 1 is reacted with NaN(3) over a very short reaction time and forms a 1-D coordination polymer. Each unit displays inter-cluster bridges via the O-atoms of teaH(2-) ligands bonding to the sodium ions of an adjacent cluster. Increasing the reaction time appears to drive the formation of 4 which forms 2-D polymeric sheets and is a packing polymorph of 3. The addition of KMnO(4) and NaN(3) to 1 resulted in compound 5, which also forms a 1-D coordination polymer of the decanuclear core unit. The 1-D chains are now linked via inter-cluster potassium and salicylate bridges. Solid state DC susceptibility measurements were performed on compounds 1-5. The data for 1 are as expected for an S = 2 Mn(III) ion, with the isothermal M vs. H data being fitted by matrix diagonalization methods to give values of g and the axial (D) and rhombic (E) zero field splitting parameters of 2.02, -2.70 cm(-1) and 0.36 cm(-1) respectively. The data for 2-5, each with an identical Mn(II)(4)Mn(III)(4) metallic core, indicates large spin ground states, with likely values of S = 16 (±1) for each. Solid state AC susceptibility measurements confirm the large spin ground state values and is also suggestive of SMM behaviour for 2-5 as observed via the onset of frequency dependent out-of-phase peaks.     

Reactions of tetrabromocatecholatomanganese(III) complexes with dioxygen

New five- and six-coordinate complexes containing the [Mn(III)(Br4cat)2](-) core (Br4cat(2-) = tetrabromo-1,2-catecholate) have been prepared. Homoleptic [Mn(III)(Br4cat)3](3-) reacts rapidly with O2 to produce tetrabromo-1,2-benzoquinone (Br4bq). The [Mn(III)(Br4cat)2](-) fragment is a robust catalytic platform for the aerobic conversion of catechols to quinones. The oxidase activity apparently derives from the coupling of metal- and ligand-centered redox events.     

First Synthesis of a Binuclear [Mn(II)(bipy)-Fe(III)(porphyrin)] Complex: Spectroscopic Characterization and First Evidence of Reversible Formation of Manganese(III) as Manganese Peroxidase

A [(P)Fe(III)-Mn(II)] bimetallic complex, mimicking the active site of manganese peroxidase, has been synthesized. A modified highly fluorinated porphyrin, 5,10,15-tris(pentafluorophenyl)-20-(o-aminophenyl)porphyrin, has been used to introduce, through a short spacer linked to the amino function, a manganese auxiliary ligand, 6-aminomethyl-2,2'-bipyridine. Two successive metalations by FeCl(2) and MnCl(2) afforded the [(P)Fe(III)-Mn(II)] bimetallic complex that has been characterized by elemental analysis and FAB(+) mass spectrometry. X-band EPR spectroscopy and magnetic susceptibility measurements were in agreement with two high spin Fe(III) and Mn(II) centers without magnetic exchange interaction. Moreover, there is no higher intermolecular association through &mgr;-chloro bridging as observed by EPR with a simpler chloromanganese complex, Mn(bipy)(2)Cl(2), at high concentration. Addition of pentafluoroiodosobenzene in methanol at 0 degrees C led to the progressive and complete disappearance of the EPR Mn(II) signals, that were recovered after addition of a phenol. This result is consistent with Mn(III) formation. This production of Mn(III) requires the presence of the iron porphyrin and is proposed to occur through the intermediate formation of a Fe(IV) dimethoxide species which can be related to the oxidation of Mn(II) catalyzed by manganese peroxidase compound II.     

Ligand effect on reversible conversion between copper(I) and bis(mu-oxo)dicopper(III) complex with a sterically hindered tetradentate tripodal ligand and monooxygenase activity of bis(mu-oxo)dicopper(III) complex

A new sterically hindered tetradentate tripodal ligand (Me2-etpy) and its labeled analogue having deuterated methylene groups (d4-Me2-etpy) were synthesized, where Me2-etpy is bis(6-methyl-2-pyridylmethyl)(2-pyridylethyl)amine. Copper(I) complexes [Cu(Me2-etpy or d4-Me2-etpy)]+ (1 and 1-d4, respectively) reacted with dioxygen at -80 degrees C in acetone to give bis(mu-oxo)dicopper(III) complexes [Cu2(O)2(Me2-etpy or d4-Me2-etpy)2](2+) (1-oxo and 1-d4-oxo, respectively), the latter of which was crystallographically characterized. Unlike a bis(mu-oxo)dicopper(III) complex with a closely related Me2-tpa ligand having a 2-pyridylmethyl pendant, 1-oxo possessing a 2-pyridylethyl pendant is not fully formed even under 1 atm of O2 at -80 degrees C and is very reactive toward the oxidation of the supporting ligand. Thermal decomposition of 1-oxo gave an N-dealkylated ligand in yield approximately 80% based on a dimer and a corresponding aldehyde. The deuterated ligand d4-Me2-etpy greatly stabilizes the bis(mu-oxo)dicopper(III) complex 1-d4-oxo, indicating that the rate determining step of the N-dealkylation is the C-H bond cleavage from the methylene group. The reversible conversion between 1-d4 and 1-d4-oxo in acetone is dependent on the temperature, and the thermodynamic parameters (DeltaH and DeltaS) of the equilibrium were determined to be -53 +/- 2 kJ mol(-1) and -187 +/- 10 J mol(-1) K(-1), respectively. The effect of the 2-pyridylethyl pendant in comparison with the 2-pyridylmethyl and 6-methyl-2-pyridylmethyl pendants on the physicochemical properties of the copper(I) and bis(mu-oxo)dicopper(III) species is discussed.