The effect of the starting material on the thermal decomposition of iron oxyhydroxides

The effect of the iron precursor on the thermal decomposition of iron oxyhydroxides was studied by DSC, DTA and TG in this work. Samples were prepared from iron nitrate, iron sulfate and iron chloride and the thermal curves obtained were analyzed by specific area measurements, X-ray diffraction and Mössbauer spectroscopy. It was found that the iron oxyhydroxide precursors affect the temperatures of the hematite formation as well as the textural properties of the final hematite producing particles with different diameters as following: iron sulfate (3.3 nm)相似文献   

Catalytic Performance of Spherical MCM-41 Modified with Copper and Iron as Catalysts of NH3-SCR Process

Spherical MCM-41 with various copper and iron loadings was prepared by surfactant directed co-condensation method. The obtained samples were characterized with respect to their structure (X-ray diffraction, XRD), texture (N₂ sorption), morphology (scanning electron microscopy, SEM), chemical composition (inductively coupled plasma optical emission spectrometry, ICP-OES), surface acidity (temperature programmed desorption of ammonia, NH₃-TPD), form, and aggregation of iron and copper species (diffuse reflectance UV-Vis spectroscopy, UV-Vis DRS) as well as their reducibility (temperature programmed reduction with hydrogen, H₂-TPR). The spherical MCM-41 samples modified with transition metals were tested as catalysts of selective catalytic reduction of NO with ammonia (NH₃-SCR). Copper containing catalysts presented high catalytic activity at low-temperature NH₃-SCR with a very high selectivity to nitrogen, which is desired reaction products. Similar results were obtained for iron containing catalysts, however in this case the loadings and forms of iron incorporated into silica samples very strongly influenced catalytic performance of the studied samples. The efficiency of the NH₃-SCR process at higher temperatures was significantly limited by the side reaction of direct ammonia oxidation. The reactivity of ammonia molecules chemisorbed on the catalysts surface in NO reduction (NH₃-SCR) and their selective oxidation (NH₃-SCO) was verified by temperature-programmed surface reactions.     

Rapid and solvent-free solid-state synthesis and characterization of Zn3V2O8 nanostructures and their phenol red aqueous solution photodegradation

Zinc vanadate (Zn₃V₂O₈) nanostructures have been successfully synthesized via simple, rapid and solvent-free solid-state method by using different complex precursors of Zn and NH₄VO₃ as novel starting materials. Effects of various zinc (II) Schiff base complex precursors and calcination temperatures were investigated to reach optimum condition. It was found that particle size and optical property of the as-prepared products could be greatly influenced via these parameters. The products were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectra, energy dispersive X-ray microanalysis (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Photoluminescence and ultraviolet-visible (UV–Vis) spectroscopy. The photocatalytic activity of zinc vanadate nano and bulk structures were compared by degradation of phenol red aqueous solution.     

The Construction of Au/Carbon Nanocomposite Material,Characterization and Their Application in Catalytic Reaction of Styrene Epoxidation

The composite nanofibers from Au nanoparticles/carbon nanofibers (Au/CNFs) were fabricated through electrospinning, chemical reduction and high-temperature calcination methods. The polyacrylonitrile acted as the carbon precursor polymer. A series of characterization methods, which include UV–Vis diffuses reflectance spectra, UV–Vis spectra, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction respectively, were used to investigate the morphology and properties of catalysts. The result showed that the gold nanoparticles were well-distributed in/on the CNFs. In the end, the composite material was applied to epoxidation of styrene to investigate its catalytic activity.     

不同锌盐改性的HZSM-5催化剂上甲醇芳构化反应

分别用ZnSO4,Zn(AcO)2,Zn(NO3)2和ZnCl2溶液对HZSM-5分子筛浸渍改性得到不同Zn盐改性的HZSM-5催化剂.采用X射线衍射、N2物理吸附、热重-质谱分析、氨程序升温脱附和吡啶吸附红外光谱等方法对改性后的催化剂进行了表征,并在固定床反应装置上考察了其甲醇芳构化反应性能.结果表明,不同Zn盐改性的HZSM-5催化剂上Zn物种的存在形式不同会导致其表面酸中心强度与分布具有较大差异,经ZnSO4改性的HZSM-5催化剂表面上强B酸中心和Zn物种的存在使其表现出最佳的甲醇芳构化反应性能.     

Effects of NH 4 + and Cl− on the preparation of nanocrystalline TiO2 by hydrothermal method

Nanocrystalline TiO₂ powders with different morphologies and grain sizes were successfully synthesized by the hydrothermal method. Different concentrations of hydrochloric acid (HCl), ammonium chloride (NH₄Cl), ammonium sulfate [(NH₄)₂SO₄], and ammonium carbonate [(NH₄)₂CO₃] were used as additives in the hydrothermal process to investigate the effect of the concentration of ammonium (NH ₄ ⁺ ) and chloride ions (Cl^?) on the phase compositions, morphologies, and grain sizes of the prepared TiO₂. The as-synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscopy, Brunauer–Emmett–Teller analysis, and UV–Vis spectra. XRD results show that the as-synthesized powders are composed of anatase or a mixture of anatase and brookite. The grain size of the synthesized nano-TiO₂ powder ranged from 5.0 to 11.3 nm, and the related BET specific surface area varied from 127.5 to 191.0 m²/g. The photocatalytic activities of the prepared TiO₂ powders were evaluated by degradation of methylene blue (MB) in aqueous solution under UV light irradiation, and the results show that the photocatalytic performance of TiO₂ powders synthesized with additives is improved compared with that of TiO₂ prepared without any additives.     

Atom Transfer Radical Polymerization of Butadiene Initiated by Benzyl Chloride/MoCl5 Substituted by 1-octanol/PPh3

A novel initiator system, benzyl chloride/MoCl₅ substituted by 1-octanol/triphenyl phosphine (PPh₃), was applied to the atom transfer radical polymerization (ATRP) of butadiene. The characterization revealed the linear increase of the number average molecular weight with the monomer conversion and the rather wide molecular weight distributions of the polymerization products. The microstructure of the butadiene was detected by IR and ¹H-NMR. The chlorine atom at ω –end group of the polymer and the change of valence states of molybdenum detected by UV–Vis spectra revealed that the polymerization accorded primarily with the mechanism of ATRP.     

Spectroscopic investigation of heterogeneous Ziegler-Natta catalysts: Ti and Mg chloride tetrahydrofuranates, their interaction compound, and the role of the activator

X-ray powder diffraction (XRPD), Infrared, Raman, and UV/Vis spectroscopy have been used to investigate the structural, vibrational, and optical properties of Ti and Mg chloride tetrahydrofuranates as precursors of heterogeneous Ziegler-Natta catalysts for polyethylene production; as well as their interaction compound (pro-catalyst) and the final catalyst obtained after interaction with the AlR(3) activator. Although the structure of the precursors and of the pro-catalyst were well known, that of the catalyst (obtained by reaction of the pro-catalyst with AlR(3)) was not easily obtainable from XRPD data. IR and Raman spectroscopy provided important information on tetrahydrofuran (thf) coordination and on the ν(M-Cl) region; whereas UV/Vis spectroscopy gave the direct proof on both the formal oxidation state and the coordination environment of the active Ti sites. Those presented herein are among the first direct experimental data on the structure of the active Ti sites in Ziegler-Natta catalysts, and can be used to validate the many computational studies that have been increasing exponentially in the last few decades.     

Effect of copper precursors on the catalytic activity of Cu/ZSM-5 catalysts for selective catalytic reduction of NO by NH<Subscript>3</Subscript>

The Cu/ZSM-5 catalysts prepared by different copper precursors were used for the selective catalytic reduction (SCR) of NO _x with NH₃. The Cu/ZSM-5 catalyst prepared by the copper nitrate (Cu/ZSM-5-N) presented the best performance among the Cu/ZSM-5 catalysts and showed above 90 % NO _x conversion at 225–405 °C. The average particle size of CuO was 5.82, 9.20, and 11.01 nm over Cu/ZSM-5-N, Cu/ZSM-5-S (prepared by copper sulfate), and Cu/ZSM-5-C (prepared by copper chloride), respectively. The Cu/ZSM-5-N catalyst showed the highly dispersed copper species, the strong surface acidity, and the excellent redox ability compared with the Cu/ZSM-5-C and Cu/ZSM-5-S catalysts. The Cu⁺ and Cu²⁺ existed in the Cu/ZSM-5 catalysts and the abundant Cu⁺ over Cu/ZSM-5-N might be responsible for the superior SCR activity.     

Novel method for synthesis of titanium silicalite-1 (TS-1)

Titanium silicalite-1 (TS-1) was easily synthesized using inorganic silicon and titanium source, tetrapropylammonium bromide (TPABr) or TPAOH as templating molecule, NH3· H2O, HDA or TEAOH etc. as base sources. In this system, TPA cations (come from TPABr or TPAOH) served as tern-plating agents to direct the MFI structure. NH3H2O, TEAOH or HDA etc. provides the alkalinity necessary for crystallization. X-ray diffraction, UV-Vis, ER spectroscopies, SEM, 29 Si MAS NMR showed that the zeolites obtained possessed all the structural characteristics of TS-1, and titanium atoms were introduced into the framework in TS-1. This material was proved to have high crystallinity and high catalytic activity to allyl chloride epoxidation and propylene epoxidation. All the samples synthesized had similar catalytic properties with a standard TS-1 through compared inorganic reactant system with organic synthesis system using propylene epoxidation. The effects of silicon source and TPABr/SiO2 ratio were discussed.     

Base‐Free Non‐Noble‐Metal‐Catalyzed Hydrogen Generation from Formic Acid: Scope and Mechanistic Insights

The iron‐catalyzed dehydrogenation of formic acid has been studied both experimentally and mechanistically. The most active catalysts were generated in situ from cationic Fe^II/Fe^III precursors and tris[2‐(diphenylphosphino)ethyl]phosphine ( 1 , PP₃). In contrast to most known noble‐metal catalysts used for this transformation, no additional base was necessary. The activity of the iron catalyst depended highly on the solvent used, the presence of halide ions, the water content, and the ligand‐to‐metal ratio. The optimal catalytic performance was achieved by using [FeH(PP₃)]BF₄/PP₃ in propylene carbonate in the presence of traces of water. With the exception of fluoride, the presence of halide ions in solution inhibited the catalytic activity. IR, Raman, UV/Vis, and EXAFS/XANES analyses gave detailed insights into the mechanism of hydrogen generation from formic acid at low temperature, supported by DFT calculations. In situ transmission FTIR measurements revealed the formation of an active iron formate species by the band observed at 1543 cm^?1, which could be correlated with the evolution of gas. This active species was deactivated in the presence of chloride ions due to the formation of a chloro species (UV/Vis, Raman, IR, and XAS). In addition, XAS measurements demonstrated the importance of the solvent for the coordination of the PP₃ ligand.     

Effect of synthesis parameters on the structural,morphological characteristics,and photocatalytic activity of La2O3 nanoparticles

This study investigates the influence of synthesis processes such as sonication, sol-gel, and microwave on the production of highly crystalline Lanthanum oxide nanoparticles (La₂O₃) employing Lanthanum nitrate and Ammonium hydroxide (NH₄OH) as precursors. X-ray diffraction (XRD), particle size analysis (DLS), Field emission scanning electron microscopy (FESEM), Fourier-transform infrared spectroscopy (FTIR), ultraviolet–visible absorption spectroscopy (UV–Vis), and electrochemical impedance spectroscopy (EIS) were used to examine the most effective processing method and its effects on the nanoparticle characteristics, such as structure, morphology, and optical and electrical behavior. Sonication produces La₂O₃ NPs with a smaller crystalline size, an agglomerated nanorod structure, a higher bandgap, and better electrical responsiveness than sol-gel and microwave techniques. Structural and optical characterization tests discovered this. The photocatalytic degradation activity of cationic Safranin and anionic Congo red dye exhibits degradation efficiency of around 90.13% and 89.66%, respectively.     

Synthesis and photocatalytic activity of nanocrystalline TiO2 co-doped with nitrogen and cobalt(II)

Nitrogen-modified cobalt-doped TiO₂ materials were successfully prepared via a modified sol–gel method. The structure and properties of the catalysts were characterized via X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution TEM, ultraviolet–visible light diffuse reflectance spectra (UV–Vis DRS), N₂ adsorption–desorption isotherms, and energy-dispersive X-ray spectroscopy. The XRD patterns of the pure and co-doped TiO₂ samples indicate that the predominant phase was anatase. The average grain size obtained from TEM was approximately 10 nm. The Brunauer–Emmett–Teller analysis results indicate that the specific surface area was 77.7 m² g^?1. The UV–Vis DRS results for the co-doped sample reveal an absorption edge that had been red-shifted to 500 nm. The photocatalytic activities of the samples were evaluated through photodegradation of papermaking wastewater under UV and visible light irradiation. Compared with the cobalt-doped TiO₂ sample and Degussa P25, the 3 mol% N-doped mesoporous N/Co-TiO₂ photocatalyst exhibited the highest photocatalytic activity, which can be ascribed to the synergistic effect of the N and Co co-doping.     

Effect of zeolite structure on the selective catalytic reduction of NO with ammonia over Mn-Fe supported on ZSM-5, BEA,MOR and FER

A series of catalysts based on Mn-Fe loaded zeolites was prepared by impregnation and their activity in the selective catalytic reduction of NO with ammonia (NH₃-SCR) was investigated. The highest catalytic conversion was recorded for MnFe-ZSM-5 (MnFe-Z), followed by MnFe-BEA (MnFe-B) and MnFe-MOR (MnFe-M), while MnFe-FER (MnFe-F) showed a very poor activity over the entire temperature range. In order to evidence a correlation between the structure and acidity of the zeolites and NO conversion, the prepared samples were characterized by various techniques (ICP-AES, N₂ physisorption at 77 K, XRD, ²⁷NMR, Raman, FTIR spectroscopy of adsorbed ammonia, H₂-TPR, DRS UV–Vis, EPR and XPS). The superior catalytic activity of MnFe-Z at low temperature is attributed to the abundance of Mn⁴⁺ concentration as revealed by XPS, the highest NH₃-L/NH₄⁺ ratio indicative of the contribution of metals in generating Lewis acidic centers as evidenced by IR-NH3, and the better reducibility of manganese and iron on ZSM-5 which increases the kinetics for red-ox cycles as confirmed in TPR analysis. Fe₃Mn₃O₈ mixed oxide phase is also detected by XRD and XPS and can be associated with the high reducibility of MnFe-Z which generates a high oxidation ability favoring NO to NO₂ oxidation. Raman spectroscopy was also used to confirm the existence of a strong synergy between metals and ZSM-5 support revealed by the shift in the signal position and the decrease in band intensities. The results showed that the zeolite framework and acidity generate catalysts with different textural and structural properties which influence the metal dispersion and speciation and hence influence the catalytic performances.

     

Influence of copper precursors in the steam reforming of methanol over Cu/SnO2/SiO2 catalysts

Cu/SnO₂/SiO₂ catalysts, prepared with three different copper precursors (copper nitrate, sulfate and chloride), were characterized and investigated for the steam reforming of methanol. Cu/SnO₂/SiO₂ catalyst, prepared with copper nitrate, showed the highest activity among the tested catalysts. The highest activity of the catalyst prepared with copper nitrate was ascribed to the highly dispersed Cu particles from CO adsorption experiment. The selectivity of methanol to H₂ decreased with an increase in the amount of acid on the surface of Cu/SnO₂/SiO₂ catalysts from FT-IR experiments.This revised version was published online in December 2005 with corrections to the Cover Date.     

Synthesis,characterization, spectroscopic and catalytic oxidation studies of Fe(III), Ni(II), Co(III), V(IV) and U(VI) Schiff base complexes with N,O donor ligands derived from 2,3-diaminopyridine

Fifteen new complexes of transition metals were designed using three Schiff base ligands and aldol condensation of 2,3-diaminopyridine with 5-R-2-hydroxybenzaldehyde (R = F, Cl, Br) in the 1:2 molar ratio. The tetradentate ligands N,N′-bis(5-R-2-hydroxybenzaldehyde) pyridine were acquired with the common formula H₂[(5-R-sal)₂py] and characterized by IR, UV–Vis spectra, ¹H-NMR and elemental analysis. These ligands produce 1:1 complexes M[(5-R-sal)₂py] with Fe(III), Ni(II), Co(III), V(IV) and U(VI) metal ions. The electronic property and nature of complexes were identified by IR, UV–Vis spectra, elemental analysis, X-ray crystallography and cyclic voltammetric methods. The catalytic activity of complexes for epoxidation of styrene with UHP as primary oxidant at minimal temperature (10 °C) has been planned. The spectral data of the ligands and their complexes are deliberate in connection with the structural changes which happen due to complex preparation. The electrochemical outcome has good conformability with what suggested for electronic interaction among metal center and ligand by the UV–Vis and IR measurements.     

Epoxidation of cyclooctene by host (nanocavity of zeolite-Y) guest (copper(II) complexes with 16- and 17-membered diaza dioxa macrocyclic Schiff bases) nanocomposite materials

This work reports the synthesis and characterization of macrocyclic copper(II) complexes encapsulated within the nanopores of zeolite-Y. The obtained nanoparticles entrapped in the nanopores of zeolite have been characterized by FT-IR, UV–Vis, Diffuse reflectance spectra, spectroscopic techniques, molar conductance, magnetic moment data, XRD, thermal, and elemental analysis. The complexes (neat and encapsulated) were used for the oxidation of cyclooctene with tert-butyl hydroperoxide as oxidant in different solvents. The supported Cu[L₁]²⁺-Y exhibited a moderate 81.9% selectivity for epoxidation with 84.2% conversion. The catalytic activity and selectivity of the heterogeneous catalysts do not change after recycling five times.     

Spinel cobalt manganese oxide nano-composites grown hydrothermally on nanosheets for enhanced photocatalytic mineralization of Acid Black 1 textile dye: XRD,FTIR, FESEM,EDS and TOC studies

Spinel cobalt manganese oxide nano-composites were grown on nanosheets using acetate precursors in mono-ethylene glycol. Crystal structures and morphologies of nano-composites were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy and energy dispersive X-ray spectroscopy to characterize the element composition. Fourier transform infrared spectroscopy was used for structural characterization and UV–Vis diffuse reflectance spectra (UV–Vis DRS) for optical properties. XRD results showed tetragonal spinel cobalt manganese oxide (Co,Mn)(Co,Mn)₂O₄ and cubic spinel cobalt manganese oxide MnCo₂O_4.5 structural phases. The crystallite size calculated by the Scherrer’s equation was 17 nm. The morphological studies displayed the existence of 40–63 nm nano-powders grown on nanosheets with a good degree of crystallization. Optical properties of cobalt manganese oxide nano-composites exhibit absorbance edge, and the band gap calculated from UV–Vis DRS results was 1.78 eV. FTIR spectra indicated that hydroxyl and oxide groups were major active sites. The absorption bands observed at 656 and 568 cm^?1 are related to stretching vibrations of Mn–O and Co–O, respectively. The photocatalytic activities of nano-composites for photocatalytic mineralization of Acid Black 1 textile dye showed an outstanding performance. Photocatalytic process yielded 91% total organic carbon removals within 2.5 h of irradiation. The enhanced photocatalytic activity was attributed to better charge separation of the photo-generated electron–hole pairs in nano-composite.     

One pot synthesis of chromium incorporated SBA-16 under acid medium-Application in the selective oxidation of benzyl alcohol derivatives

Cr-SBA-16 mesoporous silica heterogeneous catalysts (Si/Cr = 7, 14, and 28) were successfully synthesized by one-pot hydrothermal method at low acidic medium. The catalysts were characterized by means of X-ray diffraction (XRD), N₂ adsorption-desorption at 77 K, Fourier Transform Infrared (FTIR), X-ray photoelectron (XPS) and Diffuse Reflectance UV–Vis (DRS) Spectroscopies, Thermogravimetric analysis (TGA), Scanning electron microscopy (SEM) and Transmission electron microscopy (TEM) techniques. Herein, Cr-SBA-16 catalysts are evaluated in the selective catalytic oxidation of benzyl alcohol derivatives using H₂O₂ as oxidant. From XPS and UV–Vis (DRS) spectroscopies the molar ratios between Cr⁶⁺/Cr³⁺ are found to increase versus chromium loading in the following order: Cr-SBA-16(28) < Cr-SBA-16(14) < Cr-SBA-16(7). Hence the highest Cr⁶⁺ in tetrahedrally environment is observed for Si/Cr = 7. We demonstrated for the first time that the selective catalytic oxidation of benzyl alcohol (BzOH) using H₂O₂ over Cr-SBA-16 occurs through noncompetitive adsorption mechanism and the reaction is pseudo-first order to BzOH. The activity of the reaction depends on the symmetry of chromium species, herein, high activity is observed for tetrahedral chromium species in Cr-SBA-16(7). The absence of any chromium ions in the filtrate shows no chromium leaching from the silica framework.     

含骨架铁ZSM-5的合成及其负载Pt催化剂在正十二烷脱氢反应中的催化性能

采用水热合成法使铁进入分子筛MFI骨架结构,成功合成出含骨架铁的分子筛Na-[Fe]-ZSM-5,并通过离子交换法负载Pt制备脱氢催化剂Pt/Na-[Fe]-ZSM-5。通过正十二烷脱氢反应,研究了该催化剂对长链烷烃脱氢制单烯烃反应的催化性能。采用N2吸附-脱附测试、X射线衍射(XRD)、傅立叶变换红外光谱(FT-IR)、氨气程序升温脱附(NH3-TPD)、吡啶吸附的红外光谱(Py-IR)、CO化学吸附、透射电子显微镜(TEM)等不同方法对催化剂进行了表征。结果表明,通过控制骨架铁含量可调控催化剂表面酸性;含骨架铁的ZSM-5分子筛载体具有抑制负载金属晶粒长大,保持金属高分散度的作用;其负载铂催化剂Pt/Na-[Fe]ZSM-5-50具有表面弱酸中心(0.69 mmol·g^-1)和高分散Pt中心,因而具有良好的长链烷烃脱氢活性、稳定性和单烯烃选择;在转化率稳定在~20%时,TOF为4.56 s^-1,单烯烃选择性为92.7%;在实验范围内,Pt/Na-[Fe]ZSM-5催化剂表面弱酸量和脱氢反应的本征活性(TOF)均随催化剂铁含量的增加而增加。