Co/ZrO2/SiO2催化剂上费-托合成反应动力学研究Ⅰ. 反应途径分析

 采用单位键指标-二次指数势(UBI-QEP)方法对模型催化剂Co(0001)晶面进行了费-托(F-T)合成反应的反应能学分析,发现以不含氧的CxHy,s 作为中间体的表面碳化物机理在能量上较为合理,而CH2,s 作为链增长单体的链增长方式是能量上最有利的F-T合成反应途径. 在Co/ZrO2/SiO2催化剂上的非稳态实验研究中发现,在F-T合成的操作温度范围内,H2O的生成是主要的表面O的移去方式; CO解离和表面碳物种Cs加氢可能是F-T合成中的重要速控步骤; 链增长过程是F-T合成反应中较快的基元反应步骤; 甲烷的生成具有多种不同活性的表面前驱体,导致生成的甲烷严重偏离经典的ASF分布规律. 结合F-T合成表面反应的研究结果,初步确定了F-T合成动力学研究中需要考虑的机理模型的范围是以CO解离和表面碳物种Cs加氢为速控步骤,以CH2,s 插入为链增长途径的表面碳化物机理. 该结果缩小了待选动力学模型的范围.     

ZrO2助剂对Co/SiO2催化剂在Fischer-Tropsch 合成反应中稳定性的影响

采用TPR、XRD、XPS和H2脉冲吸附等表征手段考察了ZrO2助剂对Co/SiO2催化剂在Fischer-Tropsch(F-T)合成中稳定性的影响。结果表明，ZrO2的引入促进了钴物种在催化剂上的分散并明显抑制了该催化剂的失活；在反应过程中ZrO2起到结构助剂的作用，明显抑制了Co/SiO2催化剂上硅酸钴或水合硅酸钴物种的生成。     

ZrO2助剂对费-托合成Co/SiO2催化剂失活过程中结构变化的影响

 采用X射线衍射和X射线吸收精细结构表征手段对ZrO2改性前后的Co/SiO2催化剂在费-托合成过程中因结构变化而失活进行了研究. 不同失活程度的催化剂通过在常压微型固定床反应器中调节反应环境分压比p(H2O)/p(H2)进行的一系列模型实验来获得. 结果表明,Co0晶粒的氧化和长大均可导致Co/SiO2催化剂失活,在高的水分压条件下,氧化是主要的失活原因. 在相同条件下,经ZrO2改性的Co/SiO2催化剂的失活可以得到明显抑制,催化剂稳定性显著提高.     

Co-Cu/SiO2催化剂的表征

用溶胶-凝胶法制备了Co-Cu/SiO2系列的担载型催化剂,采用SBET、TPR、XRD、O2滴定等技术对该催化剂进行了研究,并考察了催化剂在F-T合成反应中的催化性能.结果表明,样品的SBET较大,Co和Cu组分均很好分散;Cu2+的加入使得Co更易于被氢气还原,Co是经由Co3+→Co2+→Co0的还原过程,Cu的还原为Cu2+→Cu0;Cu2+的引入使得样品中钴的还原度增大,对F-T合成的催化性能有了一定的改善.     

F-T合成校正综合动力学模型

考虑了烯烃、醇与酸的再吸附及其非本征效应(烯烃、醇与酸在催化剂孔道中的扩散作用、物理吸附及溶解度效应)对产物分布的影响,推导了基于详细反应机理的亚甲基插入的烷基机理F-T合成校正综合动力学模型.利用文献数据对动力学模型进行了回归,获得了与文献报道结果相一致的动力学参数.由校正动力学模型计算的烷烃、烯烃、醇与酸产物分布及烯烃比、醇烃比及酸烃比与实验数据较好地吻合.动力学计算结果表明,在铁锰催化剂上,烷烃、烯烃、醇与酸生成的反应是平行竞争反应,烯烃、醇与酸在催化剂表面的再吸附及二次反应导致产物分布偏离了ASF分布.动力学研究还表明,相同碳数的醇与酸产物在催化剂表面上再吸附及二次反应的机会比相同碳数的烯烃大.通过比较相同碳数的烯烃、醇与酸的分子体积及沸点,指出了在铁锰催化剂上,低碳数的烯烃、醇与酸的再吸附及二次反应对产物分布影响的非本征效应中,烯烃、醇与酸的扩散阻力不是主导效应.     

ZnCl2/粘土-SA01催化合成二苯甲烷反应动力学研究

在ZnCl2/粘土-SA01催化剂上合成了二苯甲烷,考察了负载量、苯/苄基氯摩尔比、催化剂用量、反应温度和时间对该反应的影响,研究了以ZnCl2/粘土-SA01为催化剂合成二苯甲烷的反应动力学,为探讨其反应机理和研究烷基化反应动力学提供了依据.结果表明,温度在303-318K时,本征动力学方程为r=k[ZnCl2/粘土-SA01]0.8[C6H6][C6H5CH2Cl],属二级反应,表观反应活化能为88.6kJ/mol;在328-353K时,其本征动力学方程为r=k[ZnCl2/粘土-SA01]0.1,反应属零级反应,表观活化能为52.8kJ/mol.     

SMAI法制备的Co/SiO2催化剂及La3+促进Co/SiO2催化剂的比较

实验证明,钴基催化剂是非常有效的F-T合成催化剂. 由于钴基催化剂对形成长链烷烃具有高活性和高选择性,故它尤其适用于天然气间接转换为液态燃料和蜡的过程[1～5]. F-T合成用钴基催化剂由四个主要成分组成: 主金属(Co)、第二过渡金属、氧化物助剂(碱金属、稀土金属或过渡金属氧化物)及大比表面积氧化物载体(氧化硅或氧化铝)[5]. La对钴基催化剂的促进效果因其被加入到催化剂前体中的方式和顺序以及载体的性质和金属钴的状态等参数的变化而有所不同. 为了评价La对Co/SiO2催化CO加氢作用的促进效果,本文对溶剂化金属原子浸渍法(SMAI)制备的Co/SiO2和Co/La-SiO2进行了对比研究. 在保持某些参数(如载体的性质和金属钴的价态等)不变的情况下,评价了La的助催化效果,取得了一些有益的结果.     

结构助剂SiO2、Al2O3对铁基催化剂浆态床F-T合成性能的影响

采用连续共沉淀与喷雾干燥成型技术相结合的方法制备了微球状Fe/Cu/K/SiO2和Fe/Cu/K/Al2O3催化剂，研究SiO2和Al2O3作为结构助剂对铁基催化剂吸附行为、炭化行为及F-T合成反应性能的影响。表征结果表明,与Al2O3相比较，SiO2抑制了H2的吸附，但促进了CO的吸附，有利于催化剂的炭化。催化剂在260℃、1.5MPa、H2/CO=0.67和2000h-1下的浆态床F-T合成反应评价表明，Fe/Cu/K/SiO2催化剂具有较高的F-T合成活性、高的水煤气变换反应（WGS）活性，且其烃产物选择性明显向高炭数方向偏移，而Fe/Cu/K/Al2O3催化剂则表现出较低的F-T合成活性、低的水煤气变换反应（WGS）活性和高的轻质烃选择性。但Fe/Cu/K/Al2O3催化剂比Fe/Cu/K/SiO2催化剂具有更好的运行稳定性。     

Re/Pt/Ce0.8Zr0.2O2/蜂窝整体催化剂上低温水煤气变换反应动力学研究

采用微分反应器,研究了新型Re/Pt/Ce0.8Zr0.2O2/蜂窝催化剂上低温水煤气变换反应的动力学行为。利用非线性最小二乘法处理正交设计的实验数据,获得了动力学方程的模型参数。所得的结果符合幂函数型动力学方程,经F检验和相关指数检验,实验值和模拟计算值符合较好。在该催化剂上水煤气变换反应的活化能为70kJ/mol,与文献中报道的数值相吻合。该催化剂上反应速率对CO、H2O、H2和CO2的反应级数分别为0.09、0.88、-0.54和-0.11,与传统的Cu基低变催化剂上的反应级数相差较大。这表明,低温水煤气变换反应在两种催化剂上遵循不同的反应机理。     

工业Fe-Mn催化剂上基于详细反应机理的F-T合成动力学模型Ⅰ.烯烃再吸附动力学研究

 利用转篮式无梯度反应器,在工业Fe-Mn催化剂上,在较宽的工业操作相关的反应条件下进行了F-T合成反应动力学研究. 首次提出了利用转篮式无梯度反应器反应气氛和反应温度均一的优势,将烃生成反应动力学的估算从传统的对烃生成和水煤气变换这两类发生在不同活性中心的反应同时进行估算的方法中分离出来,简化了烃生成动力学模型的计算. 在基于亚甲基插入的亚烷基机理动力学模型基础上,考虑到乙烯与催化剂表面强的相互作用,将乙烯和乙烷的生成动力学参数单独计算. 动力学模型计算的链增长、烷烃和烯烃生成的活化能均与文献报道值具有较好的一致性. 由F-T合成动力学模型计算的合成气消耗速率、甲烷生成速率和C5+的生成速率较好地与实验值吻合. 通过动力学模型并结合实验结果分析发现,未考虑除化学反应之外的非本征因素的烯烃再吸附动力学模型不能够正确预测烃产物分布偏离ASF规律及烯烷比随碳数增加而下降的现象.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.     

Copper-catalyzed multicomponent reactions of 2-iodoanilines,benzylamines, and elemental sulfur toward 2-arylbenzothiazoles

A relatively cheap copper salt-catalyzed, three-component approach providing 2-arylbenzothiazoles in good to excellent yields from readily available 2-iodoanilines, benzylamines, and sulfur powder is reported. This methodology allows preparation of various classes of 2-arylbenzothiazoles and provides a general, reliable approach.