Rapid Analysis of Trace Quantities (1 PPM) of Bromide in Natural Water

Abstract

An analytical procedure for the rapid assay of trace quantities of bromide ion is described. An exchange resin contained in a filter disk is used to separate the ion and the bromide concentration is then measured as an emission intensity on the x-ray spectrograph. Analytical error is estimated at 5% and 0.05 ppm Br is the statistical detectability limit when compared with a standard disk containing 100 ppm Br^?.     

A Novel Colorimetric Reagent for Potassium Based on Crown Ether Complex Formation

Abstract

The extraction study of alkali metal ions was made with a new type of crown ether, 4′-picrylaminobenzo-15-crown-5 (HL). Upon dissociation in alkaline medium orange-colored HL gives blood-red anion, L^?, and extracts selectively K⁺ (and to a lesser extent Rb⁺) ion into chloroform as a colored complex of composition ML·HL. A colorimetric determination of 10 - 400 ppm K⁺ in the presence of < 2000 ppm Na⁺ was possible using this new crown ether reagent.     

Spectrophotometric Determination of Sulfate by Solvent Extraction with Nonionic Surfactant Span 20 and Crystal Violet

Abstract

The sulfate ion is extracted into toluene with nonionic surfactant span 20 and crystal violet. A linear calibration curve was obtained between the absorbance due to crystal violet in the extract and sulfate concentrations over the range 2.5 × 10^?5 to 2.5 × 10^?4 mol 1^?1 (2.4 to 24 ppm) in the aqueous phase.     

119Sn NMR Spectra of Some Carbohydrate Organotin Derivatives

Abstract

The ¹¹⁹Sn NMR spectra of several sugar-tin derivatives were recorded. The geometric and steric isomers of all of the organotin derivatives studied were easily differentiated by ¹¹⁹Sn NMR. The appropriate ¹¹⁹Sn resonances are: ca - 50 ppm for trans and ?60 ppm for cis vinyltin derivatives (1-3), ca 16 ppm for allyltins 4-6, and ca ?32 ppm for tin-carbinols 9 and 11. When the hydroxyl group in carbinol 9 was converted to an O-acetyl group, the chemical shift of ¹¹⁹Sn was shifted to ?22 ppm.     

Extraction,Spectrophotometric and Atomic Absorption Spectrophotometric Determination of Molybdenum with Caffeic Acid and Application in High Purity Grade Steel and Environmental Samples

Abstract

A new selective and sensitive method for extraction of yellow Mo (VI)-caffeic acid complex with a liquid ion exchanger, Aliquat 336 from 4.0 pH, and spectrophotometric determination of molybdenum in trace amounts is described. the molar absorptivity of the complex is 1.1 × 10⁵ 1 mol^?1 cm^?1 at 340 nm and the colour system obeys Beer's law in the range 0.04–0.99 ppm of Mo(VI). the molybdenum is also determined with AAS and the method is applied for its determination in steel and environmental samples.     

Electroanalytical and spectral investigation of organic receptors as colorimetric and absorption ratiometric anion chemosensor

Colorimetric receptors R1 and R2 have been designed and synthesized by Schiff base condensation and characterised by standard spectroscopic techniques. Anion binding ability of the receptors have been investigated quantitatively through optical, electrochemical and ¹HNMR titration studies. UV-vis spectra of receptor R1 and R2 exhibited a significant red shift for F^? and AcO^? ions with a visual color response. Receptor R1 exhibited selective response towards AcO^? ion in the presence of HEPES buffer media. Incremental color change of receptor R2 with the higher equivalence of AcO^? ions clearly represent the ratiometric response. Cyclic voltammetric studies of R1 and R2 exhibits shift in oxidation and reduction peak with successive addition of AcO^? ions indicating the anion induced oxidation of -NH and reduction of the keto group and nitro species. Electrooptical and ¹H NMR titration studies of R2 collectively reflects the anion induced change of chromophore from C=N to N=N indicative of azo-hydrazone tautomeric signaling in the presence of AcO^? ions. Lower detection limit of 2.1 and 0.41 ppm achieved with sodium salt of AcO^? ion with R1 and R2 reflects their utility as colorimetric chemosensor.     

Indirect Spectrophotometric Determination of Fluoride In Water With Zirconium-Spadns By Flow Injection Analysis

Abstract

The zirconium-SPADNS method for the determination of fluoride based on the effect of fluoride ion on the color system (Zr-SPADNS), has been adapted to the continuous flow spectrophotometry. A manifold consisting of two lines was used. the decrease in the absorbance of Zr-SPADNS reagent at 590 nm is linear with fluoride concentration in the range 0.00-3.5 ppm. the method has a detection limit of 0.02 ppm fluoride. At a sampling rate of 50 determinations per hour, the precision was about 1% relative standard deviation. the method is applied to the determination of fluoride in natural water samples. the good agreement between the results obtained by this method and those obtained by a potentiometric method using a fluoride ion-selective electrode, show that the new method is potentially suitable for routine analysis. the effects of reaction conditions, flow parameters, and interferences on the FIA-spectrophotometric signals are reported. amount of interfering ion is present in quantity great enough to produce an error of 0.1 ppm or more, the sample must be distilled¹⁷     

A highly selective chemosensor derived from benzamide hydrazones for the detection of cyanide ion in organic and organic-aqueous media: design,synthesis, sensing and computational studies

ABSTRACT

A new, highly sensitive and selective chemosensing method has been developed for the detection of cyanide ion using benzamide hydrazone receptors (R1-R4). The sensing ability of these compounds towards CN^? in the presence of Br ^?, HSO₄ ^?, Cl^?, OH^?, I^?, F^?, AcO^?, NO₂ ^? and NO₃ ^? in DMF and DMF-Aqueous mixture (DMF:H₂O, 9:1 v/v) was investigated. The binding characteristics of the probe with cyanide ions carried out by ¹ H NMR titrations indicated the deprotonation of N-H group through H-bond interactions between benzamide hydrazones and cyanide ions; it has been theoretically supported by DFT. The binding constant (Ka) and stoichiometry of the host–guest complex formed was calculated by the Benesi–Hildebrand (B–H) plot, and strong interaction of the probe with CN^- ions forming a 1:2 binding stoichiometry has been noted in this study. In a DMF and aqueous medium for CN^? ion, the lower limit of detection (LOD in ppm) is compared to the limit of quantification (LOQ in ppm), which is quite better in terms of sensitivity.     

Chemical states of ppm cerium in steel by ToF-SIMS analysis

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) was employed for an analysis of the rare earth element Ce in pure iron and steel. Secondary ion images showed that the amount of the segregation of Ce and its oxides was much less as the concentration of Ce decreased to about 11 ppm in the pure iron. In terms of depth profiling from the surface to the matrix, variation of the CeO⁺/Ce⁺ ratio in a Ce oxides sample and a pure Ce sample exhibited difference between oxidized state and metallic state. It was demonstrated that metallic Ce was presented when the ratio of CeO⁺/Ce⁺ decreased to approximately 2 and even smaller. Oxygen content with concentration of tens of ppm may influence the ratio obviously. Such ToF-SIMS analysis was also feasible to discern the states of cerium in a Q345E steel with concentration in ppm level.     

An Improved Synthesis of 1, 4-Dithiaspiro [4.5] Decan-8-One (Cyclohexane-1, 4-Dione Monothioacetal)

Abstract

Recent experiments have shown that monobasic chromophoric crown ethers have very selective extraction behavior making them useful as analytical organic reagents.^(1–6) The chromogenic crown ethers are synthesized by reacting a chromophore like picryl chloride to an aminobenzo crown ether. One such compound 2″4″-dinitro-6-trifluoromethylphenyl-4′-aminobenzo-15-crown-5 (1) exhibits linear response to K⁺ from 700-5ppm in the presence of 3000ppm Na⁺.     

Spectrometric Determination of Nitrite in Aqueous Solution by the Diazotization-Coupling Method with p-Aminobenzophenone-N-(1-Naphthyl)-Ethylenediamine

Abstract

Nitrite ion at low concentration is determined spectrometrically by diazotization of p-aminobenzo-phenone and coupling of the resulting diazonium cation with N-(1-naphthy1)-ethylene-diamine to form a reddish-violet coloured water-soluble azo dye with maximum absorption at 555 nm. The method is suitable for the determination of nitrite over the range of 0.04–1.00 ppm. Beer's law is obeyed over this range of concentrations. The observed molar absorptivity and Sandell's sensitivity of the azo dye are 7.0 × 10⁴ mol^?1 cm^?1 and 6.5 × 10^?4 μg cm^?2, respectively. Interferences due to other ions were studied to test the selectivity.     

The Detection of Two Lithium Species in the Blood Serum of Mental Patients

Abstract

Li FT-NMR was used for the detection of different lithium species in human serum. Two serum samples from mentally ill patients undergoing lithium treatment were studied. Both samples gave spectra with a major peak corresponding to aqueous lithium ion and a much smaller peak at ?0.3 ppm relative to the lithium ion peak. Two serum samples from normal persons were spiked with lithium but the resulting spectra showed only the lithium ion peak.     

Enantiopure cryptophane-129Xe nuclear magnetic resonance biosensors targeting carbonic anhydrase

The (+) and ( ? ) enantiomers for a cryptophane-7-bond-linker-benzenesulfonamide biosensor (C7B) were synthesised and their chirality was confirmed by electronic circular dichroism spectroscopy. Biosensor binding to carbonic anhydrase II (CAII) was characterised for both enantiomers by hyperpolarised (HP) ¹²⁹Xe NMR spectroscopy. Our previous study of the racemic ( ± ) C7B biosensor–CAII complex [Chambers, J.M.; Hill, P.A.; Aaron, J.A.; Han, Z.H.; Christianson, D.W.; Kuzma, N.N.; Dmochowski, I.J. J. Am. Chem. Soc.2009, 131, 563–569] identified two ‘bound’ ¹²⁹Xe@C7B peaks by HP ¹²⁹Xe NMR (at 71 and 67 ppm, relative to ‘free’ biosensor at 64 ppm), which led to the initial hypothesis that (+) and ( ? ) enantiomers produce diastereomeric peaks when coordinated to Zn²⁺ at the chiral CAII active site. Unexpectedly, the single enantiomers complexed with CAII also identified two ‘bound’ ¹²⁹Xe@C7B peaks: (+) 72, 68 ppm and ( ? ) 68, 67 ppm. These results are consistent with X-ray crystallographic evidence for benzenesulfonamide inhibitors occupying a second site near the CAII surface. As illustrated by our studies of this model protein–ligand interaction, HP ¹²⁹Xe NMR spectroscopy can be useful for identifying supramolecular assemblies in solution.     

Colorimetric Determination of Surfactants Using Lipase

Abstract

The inhibition effect of a surfactant on an enzymic reaction of lipase was investigated to determine small amounts of the surfactant. Surfactants could be determined by colori-metrically measuring the degree of their inhibition in the enzymic reaction. By the method studied, 10–200 ppm of LAS, 25–300 ppm of ABS, 10² ?10³ ppm of SDS, and 1–10% of polyethyleneglycol dodecyl ether and polyethylene glycol octylphenyl ether could be determined with coefficient of variance of about 2%.     

New Simultaneous Catalytic Determination of Thiocyanate and Iodide by Flow Injection Analysis

Abstract

Flow injection analysis (FIA) with a double injection technique was applied to catalytic determination of thiocyanate and iodide in the redox reaction between cerium (IV) and arsenic (III). Selective inactivation of the catalytic activity of thiocyanate was investigated. Amounts of only iodide and amounts of both thiocyanate and iodide were simultaneously determined by the FIA. Detection limits of the method were 0.2 ppm SCN^? and 0.1 ppm I^?.     

1H, 13C and 199Hg NMR Studies of the Complexation of HgCl2 by Imidazolidine-2-Thione and its Derivatives

Abstract

Mercury(II) complexes of imidazolidine-2-thione and its derivatives have been synthesized and their ¹H, ¹³C and ¹⁹⁹Hg NMR spectra measured. HgCl₂ forms L₂HgCl₂ type complexes (where L = imidazolidine-2-thione and its derivatives). The NH group of the ligand is shifted downfield by about +1.37 ppm in the ¹H NMR after complexation. The C-2 carbon in the ¹³C NMR is shifted by—6.50 ppm for mono N-substituted ligands, but by—5.30 ppm for N,N''-disubstituted ligands. The ¹⁹⁹Hg NMR resonance is shifted by about—60 ppm for N-substituted ligands, but—140 ppm shifts were observed for N',N'-disubstituted ligands.     

The Determination of Non-Oxidizable Species Using Electrochemical Detection in Ion Chromatography

Abstract

The use of an electrochemical detector for the ion chromatographic detection of non-oxidizable anions such as F^?, PO₄ ^?3, NO₃ ^?, and SO₄ ^?2 is described. The electrochemical detector is placed in line after a fiber suppressor and responds to eluent pH changes as the dissociated acids pass through the detector. The intensity of the signal is dependent on the applied potential at the cell with 0.3V being an optimum. Minimum detection limits with a 0.10 mL sample injection volume are below 0.5 ppm for F^?, Cl^?, PO₄ ^?3, NO₃ ^?, and SO₄ ^?2. No adverse effects on the silver working electrode have been observed.     

Spectroscopic studies of ionic solvation. XX. Cesium-133 NMR study of cesium salts in different solvents

Cesium-133 chemical shifts were measured in a number of solvents as a function of salt concentration and of the counterion. Infinite-dilution chemical shifts (vs. aqueous Cs⁺ ion at infinite dilution) ranged from +59.8 ppm for nitromethane solutions to –29.4 ppm for pyridine. In general, the magnitude of the downfield chemical shift reflected the donor ability of the solvents. Ion-pair formation constants were calculated from the concentration dependences of¹³³Cs chemical shifts in several nonaqueous solvents.     

Determination of Fluorine in Vegetation by Proton Activation Analysis

Abstract

Techniques have been developed for proton activation analysis using the ¹⁹F(p,p′y)¹⁹F reaction to measure the fluorine content of pulverized samples of vegetation which have been exposed to fluorides in the atmosphere or soil. The method is non-destructive and neither the chemical form of fluorine in the sample nor the type of vegetation analyzed appears to affect results. Calibration is performed by analyzing samples to which known amounts of fluorine are added. The fluorine content of 11 vegetation samples was determined by proton activation analysis and by standard chemical techniques. The values obtained by the two methods were in generally good agreement. Fluorine concentrations greater than 1 ppm can be measured with uncertainties ranging from about 50% at 5 ppm to less than 10% at concentrations above 50 ppm.