Evidence of lanthanum–chromium mixed oxides formed in CrOx/La2O3 model catalysts

CrO_x/La₂O₃ mixed oxides, prepared by impregnating La₂O₃ with appropriate aqueous solutions of (NH₄)₂CrO₄ and calcining at 600 °C for 4 h, have been investigated by means of XRD, TPR, XPS, DRIFTS, and Raman spectroscopy (RS). The formation of the compounds La₂CrO₆, La(OH)CrO₄ and LaCrO₄ under these conditions was evidenced. Strong peaks at 864, 884, 913, and 921 cm⁻¹, as well as weak peaks at 136, 180, 354, 370, and 388 cm⁻¹ in the RS spectrum of CrO_x/La₂O₃ have been assigned to La₂CrO₆.     

Green synthesis of methyl trifluoropyruvate catalyzed by solid acids

Solid acids – NiSO₄/Al₂O₃, Fe₂(SO₄)₃/Al₂O₃ and TiO₂/SO₄²⁻ – appeared to be effective catalysts for the acid catalyzed synthesis of methyl ester of trifluoropyruvic acid. They are active at 150–180 °C.     

The direct synthesis of dimethyl ether from syngas over hybrid catalysts with sulfate-modified γ-alumina as methanol dehydration components

A series of γ-Al₂O₃ samples modified with various contents of sulfate (0–15 wt.%) and calcined at different temperatures (350–750 °C) were prepared by an impregnation method and physically admixed with CuO–ZnO–Al₂O₃ methanol synthesis catalyst to form hybrid catalysts. The direct synthesis of dimethyl ether (DME) from syngas was carried out over the prepared hybrid catalysts under pressurized fixed-bed continuous flow conditions. The results revealed that the catalytic activity of SO₄²⁻/γ-Al₂O₃ for methanol dehydration increased significantly when the content of sulfate increased to 10 wt.%, resulting in the increase in both DME selectivity and CO conversion. However, when the content of sulfate of SO₄²⁻/γ-Al₂O₃ was further increased to 15 wt.%, the activity for methanol dehydration was increased, and the selectivity for DME decreased slightly as reflected in the increased formation of byproducts like hydrocarbons and CO₂. On the other hand, when the calcination temperature of SO₄²⁻/γ-Al₂O₃ increased from 350 °C to 550 °C, both the CO conversion and the DME selectivity increased gradually, accompanied with the decreased formation of CO₂. Nevertheless, a further increase in calcination temperature to 750 °C remarkably decreased the catalytic activity of SO₄²⁻/γ-Al₂O₃ for methanol dehydration, resulting in the significant decline in both DME selectivity and CO conversion. The hybrid catalyst containing the SO₄²⁻/γ-Al₂O₃ with 10 wt.% sulfate and calcined at 550 °C exhibited the highest selectivity and yield for the synthesis of DME.     

Coordination geometry of chromium(VI) species. The first example of cis-bridging chromate ions in helically structured catena(μ-CrO4-O,O′)[Ni(HIm)3H2O]

Nickel(II) chromate complex with imidazole (HIm) was isolated from the [Ni²⁺–HIm–CrO₄²⁻] system in various experimental conditions, i.e. reagent molar ratios and nickel(II) salts. The catena(μ-CrO₄-O,O′)[Ni(HIm)₃H₂O] (1) crystallizes in monoclinic crystal system—space group P2₁/n with cell parameters: a=11.784(2), b=8.899(2), c=13.934(3) (Å), β=95.19(3) (°). The unit cell contains two independent helixes, left- and right-handed, stabilized by intrahelical and interhelical hydrogen bonds (HB) and π–π interactions. The cis coordination of the CrO₄²⁻ anions and the HB systems appeared to be the main determinants of the helical architecture. To the best of our knowledge the cis-chromate coordination was observed for the first time. The cis coordination causes the distortion of the nickel octahedron, which was analysed by 4 K single crystal electronic spectra with D_4h symmetry approximation (gaussian resolution and crystal field parameters). This symmetry was also confirmed with the polarised electronic spectra. The magnetic properties of the complex suggest the occurrence of weak intrachain antiferromagnetic interactions between the magnetic Ni^II center. The computational DFT studies of complex 1 assuming three possible isomers mer[(HIm)₃]–cis[(CrO₄²⁻)₂], mer–trans and fac–cis suggested that the main contribution to the stability of 1 might have interhelical and intrahelical hydrogen bonds.     

A “vertex electron pair” scheme (VEPS) for describing the skeletal electron distribution in borane-type clusters

A predominantly localized electron pair scheme is outlined for describing the electron distribution and bonding in closo borane anions B_nH_n²⁻ and related electron deficient deltahedral clusters, in which a skeletal electron pair is assigned to each vertex, one pair being regarded as delocalized just inside the roughly spherical surface on which the skeletal atoms lie. The scheme gives a clearer picture of the electron distribution than is conveyed by resonating 2- and 3-centre bonds in the polyhedron edges and faces, and allows the bond orders of the polyhedron edge links to be calculated readily. The consequence of formal removal of BH²⁺ units from closo species B_nH_n²⁻ to generate nido species B_n−1H_n−1⁴⁻ and arachno species B_n−2H_n−2⁶⁻ is explored, and seen to allow rationalization of two features of such deltahedral-fragment clusters: (i) why a high-connectivity vertex is left vacant and (ii) why the frontier orbitals of such species concentrate electronic charge around their open faces. Moreover, in the case of D_4‘h B₄H₄⁶⁻ (cf. C₄H₄²⁻) and D_5h B₅H₅⁶⁻ (cf. C₅H₅⁻), the approach leads directly to the familiar picture for aromatic ring systems in which the highest filled, doubly degenerate π-bonding molecular orbital concentrates electronic charge in rings above and below the polygon on which the skeletal nuclei lie. It also leads to the expectation that arachno clusters with non-adjacent vacant vertices will be more stable than those with adjacent vacant vertices.     

The electrolyte NRTL model and speciation approach as applied to multicomponent aqueous solutions of H2SO4, Fe2(SO4)3, MgSO4 and Al2(SO4)3 at 230–270 °C

This work presents chemical modeling of solubilities of metal sulfates in aqueous solutions of sulfuric acid at high temperatures. Calculations were compared with experimental solubility measurements of hematite (Fe₂O₃) in aqueous ternary and quaternary systems of H₂SO₄, MgSO₄ and Al₂(SO₄)₃ at high temperatures. A hybrid model of ion-association and electrolyte non-random two liquid (ENRTL) theory was employed to fit solubility data in three ternary systems H₂SO₄–MgSO₄–H₂O, H₂SO₄–Al₂(SO₄)₃–H₂O at 235–270 °C and H₂SO₄–Fe₂(SO₄)₃–H₂O at 150–270 °C. Employing the Aspen Plus™ property program, the electrolyte NRTL local composition model was used for calculating activity coefficients of the ions Al³⁺, Mg²⁺ Fe³⁺ and SO₄²⁻, HSO₄⁻, OH⁻, H₃O⁺, respectively, as well as molecular species. The solid phases were hydronium alunite (H₃O)Al₃(SO₄)₂(OH)₆, hematite Fe₂O₃ and magnesium sulfate monohydrate (MgSO₄)·H₂O which were employed as constraint precipitation solids in calculating the metal sulfate solubilities. A correlation for the equilibrium constants of the association reactions of complex species versus temperature was implemented. Based on the maximum-likelihood principle, the binary interaction energy parameters for the ionic species as well as the coefficients for equilibrium constants of the reactions were obtained simultaneously using the solubility data of the ternary systems. Following that, the solubilities of metal sulfates in the quaternary systems H₂SO₄–Fe₂(SO₄)₃–MgSO₄–H₂O, H₂SO₄–Fe₂(SO₄)₃–Al₂(SO₄)₃–H₂O at 250 °C and H₂SO₄–Al₂(SO₄)₃–MgSO₄–H₂O at 230–270 °C were predicted. The calculated results were in excellent agreement with the experimental data.     

Capillary electrochromatographic separation of metal ion species with on-line detection by inductively coupled plasma mass spectrometry

A bonded phase capillary column containing macrocyclic polyamine, [28]ane-N₆O₂ functional groups was used for the electrophoretic separation of arsenic, chromium and selenium species. A simple device interfacing this capillary electrochromatography (CEC) systems to an inductively coupled plasma mass spectrometer (ICPMS) is described. The dimension of the capillary column was 160 cm×100 μm i.d. To accommodate this electrophoretic separation, an auxiliary capillary was used with nitric acid (0.05 M) as makeup liquid. With the electrokinetic method at –20 kV, 20 s and a nebulizer gas flow rate of 1 l min⁻¹, the sample injected was analyzed with an applied potential of −20 kV. The background electrolyte buffer for the separation of CrO₄²⁻–Cr³⁺ was phosphate (20 mM, pH 6.5). That for HAsO₄²⁻–Ph₄As⁺ was pyromellitate (20 mM, pH 6.0) and for SeO₄²⁻–SeO₃²⁻ was acetate (20 mM, pH 6.0). The role of the buffer’s anion was also discussed. The separation efficiency of the bonded phase was compared with the bare fused silica. Concentration detection limits for these metal ions were in the low ppb range. In addition, the matrix effect of the established system with the bonded phase was found smaller than that with the bare fused silica.     

Sulfur speciation by capillary electrophoresis with indirect spectrophotometric detection: In search of a suitable carrier electrolyte to maximize sensitivity

Various probes have been evaluated as alternative ions to chromate, which is most frequently used in the analysis of small inorganic anions by capillary electrophoresis with indirect UV detection. Sulfur species (S₂O₃²⁻, SO₄²⁻, S₄O₆²⁻, S(−II)) have been determined. The optimization of the method was particularly focused on S(−II) since this species rapidly yields S₂O₃²⁻ and SO₄²⁻ in the presence of oxidizing agents. Therefore, it could not be analysed by capillary electrophoresis with chromate as the background electrolyte. The alternative probe ions all contain aromatic rings (benzene or naphthalene) to provide the intrinsic background absorbance for indirect detection. They are all fully ionized at the pH chosen for this application (TRIS buffer, pH=8) and the range of their mobilities is large enough to suit the analytes mobilities. They have no oxidizing properties. Transfer ratios have been determined experimentally and compared to calculated values derived from the Kohlrausch regulation function. All experimental values were lower than expected from the calculations, which proves the limitations of the Kohlrausch theory concerning the configuration (electrolyte/analyte) of this study. However, maximizing (z_A/z_E)·ε_E (with z_A and z_E being the charges of the analyte and the probe, respectively, and ε_E the molar absorptivity of the probe) and keeping the mobility of the probe close to those of the analytes will give a good hint for the choice of the most suitable UV-absorbing probe. Pyromellitate and naphthalenetrisulfonate, the mobilities of which are close to that of S(−II), give the best sensitivity for this species, with good resolution and sensitivity for all other species.     

Structure and redox properties of CexPr1−xO2−δ mixed oxides and their catalytic activities for CO, CH3OH and CH4 combustion

A series of Ce_xPr_1−xO_2−δ mixed oxides were synthesized by a sol–gel method and characterized by Raman, XRD and TPR techniques. The oxidation activity for CO, CH₃OH and CH₄ on these mixed oxides was investigated. When the value x was changed from 1.0 to 0.8, only a cubic phase CeO₂ was observed. The samples were greatly crystallized in the range of the value x from 0.99 to 0.80, which is due to the formation of solid solutions caused by the complete insertion of Pr into the CeO₂ crystal lattices. Raman bands at 465 and 1150 cm⁻¹ in Ce_xPr_1−xO_2−δ samples are attributed to the Raman active F_2g mode of CeO₂. The broad band at around 570 cm⁻¹ in the region of 0.3 ≤ x ≤ 0.99 can be linked to oxygen vacancies. The new band at 195 cm⁻¹ may be ascribed to the asymmetric vibration caused by the formation of oxygen vacancies. The TPR profile of Pr₆O₁₁ shows two reduction peaks and the reduction process is followed: . The reduction temperature of Ce_xPr_1−xO_2−δ mixed oxides is lower than those of Pr₆O₁₁ or CeO₂. TPR results indicate that Ce_xPr_1−xO_2−δ mixed oxides have higher redox properties because of the formation of Ce_xPr_1−xO_2−δ solid solutions. The presence of the oxygen vacancies favors CO and CH₃OH oxidation, while the activity of CH₄ oxidation is mostly related to reduction temperatures and redox properties.     

A spectroscopic study on the 12-heteropolyacids of molybdenum and tungsten (H3PMo12−nWnO40) combined with cetylpyridinium bromide in the epoxidation of cyclopentene

The epoxidation of cyclopentene with hydrogen peroxide catalyzed by 12-heteropolyacids of molybdenum and tungsten (H₃PMo_12−nW_nO₄₀, n = 1–11), 12-tungstophosphoric acid and 12-molybdophosphoric acid combined with cetylpyridinium bromide as a phase transfer reagent was carried out in acetonitrile. Among 13 heteropolyacids investigated, catalyst of H₃PMo₆W₆O₄₀ showed the highest activity, giving a conversion of 60% and a selectivity of 95% in the epoxidation of cyclopentene. The fresh catalysts and the catalysts under reaction condition were characterized by UV–vis, FT-IR and ³¹P NMR spectroscopy, which has revealed that all of the molybdotungstophosphoric acids were degraded in the presence of hydrogen peroxide to form a considerable amount of phosphorus-containing species. The active species resulted from H₃PMo₆W₆O₄₀ are new kinds of phosphorus-containing species, which is different from {PO₄[WO(O₂)₂]₄}³⁻.     

Single crystal growth of Bi1−xSrxMnO3—Thermodynamics and experiment

The primary crystallization field of a perovskite solid solution Bi_1−xSr_xMnO_3−δ was delimited by calculating the respective phase equilibria in the quaternary Bi–Sr–Mn–O system. The calculations are based on the recent assessment involving all three ternary subsystems, a quaternary liquid approximated as a mixture of Mn, MnO, Mn₂O₃, SrO and Bi₂O₃ species with binary Redlich–Kister coefficients and the perovskite phase described in terms of a point defect model allowing Sr²⁺ for Bi³⁺ substitution, oxygen vacancy formation and the related Mn³⁺/Mn⁴⁺ mixing on Mn-sublattice. The crystallization path and the composition of the crystallized solid solution are compared with single crystal growth experiments performed by self-flux method from a Bi-rich melt. The crystallization path obtained for a selected feed composition for which the largest and high quality single crystal have been grown, turns out to end very close to the global eutectic point.     

Peroxidase immobilized on Amberlite IRA-743 resin for on-line spectrophotometric detection of hydrogen peroxide in rainwater

The importance of atmospheric hydrogen peroxide (H₂O₂) in the oxidation of SO₂ and other compounds has been well established. A spectrophotometric method for the determination of hydrogen peroxide in rainwater is proposed. This method is based on selective oxidation of hydrogen peroxide using an on-line tubular reactor containing peroxidase immobilized on Amberlite IRA-743 resin. The hydrogen peroxide in the presence of phenol, 4-aminoantipyrine and peroxidase, produces a red compound (λ = 505 nm). Beer's law is obeyed in a concentration range of 1–100 μmol l⁻¹ hydrogen peroxide with an excellent correlation coefficient (r = 0.9991), at pH 7.0, with a relative standard deviation (R.S.D.) <2%. The detection limit of the method is 0.7 μmol l⁻¹ (4.8 ng of H₂O₂ in a 200 μl sample). Measurements of hydrogen peroxide in rain samples were carried out over the period from November 2003 to January 2005, in the central area of the Juiz de Fora city, Brazil. The concentration of H₂O₂ varied from values lower than the detection limit to 92.5 μmol l⁻¹. The effects of the presence of nonseasalt (NSS) SO₄²⁻, NO₃⁻ and H⁺ in the concentration of hydrogen peroxide in the rainwater had been evaluated. The average concentrations of H₂O₂, NO₃⁻, NSS SO₄²⁻ and SO₄²⁻ are 23.4, 18.9, 7.9 and 10.3 μmol l⁻¹, respectively. The pH values for 82% of the collected samples are greater than 5.0. The spectrophotometeric method developed in this work that uses enzyme immobilized on the resin ion-exchange compared with the amperometric method did not present any significant difference in the results.     

Ligand deprotonation significance in the formation of the molybdate ion-malic acid complexes

Using the temperature jump technique, the study of the kinetics of the complexing of oxomolybdate anion with malic acid has been carried out in aqueous solutions of pH 7.15–8.5 at ionic strength 0.1 M (KNO₃) and 25°'C. A reaction scheme for the formation of 1 : 1 complexes is proposed which accounts for the observed relaxation rates.

The significance of the ligand deprotonation on the complexation reaction of MoO₄²⁻ by a single protonated ligand, i.e. MoO₄²⁻+LH^nk→MoO₃(OH)Lⁿ⁻², (where n = 1 -, 2 -, etc), is analysed on the basis of a simple model. A linear correlation between the log k and the pK of the monoprotonated ligand (LH) is found for this reaction when the global process is controlled by the proton transfer from the ligand to an oxogroup, i.e. log k = a - 0.5xpK. It is found that this correlation is satisfied by MoO₄²⁻ and WO₄²⁻. The experimental slopes for these oxyanions are −0.503 and −0.543 respectively, in agreement with the predictions.     

Photodegradation of a textile dye catalyzed by sol–gel derived nanocrystalline TiO2 via ultrasonic irradiation

Nanocrstalline pure anatase titania were prepared by sol–gel process at room temperature followed by ultrasonication (Ti–US). The photocatalytic activity of Ti–US has been evaluated by the degradation of textile dye, Methylene Blue in presence and absence of common inorganic salts (NO₃⁻, C₂O₄²⁻, SO₄²⁻, citrate). It was observed that, in presence of anions, the degradation of the dye increases significantly. The influence of the presence of H₂O₂ on the degradation rate was studied. The dependence of photodegradation of the dye rates on various parameters such as dye concentration, photocatalyst concentration and pH were also investigated. The photodegradation rate follows first order kinetics. H₂O₂ and UV light have a negligible effect in absence of Ti–US catalyst. The relative photonic efficiency of the system is reported using phenol as a standard organic compound.     

Theoretical study on magnetic coupling interaction for Cu(II) binuclear systems with extended bridging groups

The magnetic coupling interaction for Cu(II) binuclear systems with bridging groups C₂O₄²⁻, C₂O₂(NH)₂²⁻ (cis), C₂O₂(NH)₂²⁻ (trans) and C₂S₂(NH)₂²⁻ (trans) was studied by the broken symmetry (BS) approach within the framework of the density functional theory (DFT). The influence of different coordination atoms and geometry on magnetic coupling interaction was theoretically analyzed. Both of the calculated and experimental results were compared. The variation trends of coupling interaction calculated are in agreement with experimental ones.     

On the origin of the splittings of the ν3(SO4) modes in the specular reflectance IR spectra of gypsum

The IR polarized spectra of gypsum CaSO₄·2H₂O were recorded at incidence angles of approximately 10 and 16 degrees. Band singlet or doublet was observed for the higher frequency ν₃(SO₄²⁻) mode of B_u symmetry type, depending on polarization (n or p). A doublet was observed for the lower frequency ν₃(SO₄²⁻) mode of B_u symmetry type too, irrespectively of the type of polarization. In order to give an explanation for the doublets origin, a model permittivity function was constructed. Quite good agreement exists between the reflectance based on the model permittivity function and the experimentally measured one for the high-frequency doublet. The origin of the lower frequency doublet could not be explained in this way, but may be speculated to result from an Evans type interaction between a combination of a water libration and ν₂(SO₄²⁻), with the lower frequency ν₃(SO₄²⁻) mode.     

Untersuchung des wirkungsmechanismus vom redox-indikator 2-hydroxy-4-amino-4'-methoxydiphenylamin und seineanwendungen

Either of two quinoidal structures might be formed in the oxidation of 2-hydroxy-4-amino-4'-miethoxydiphenylamine (2-Oxyvariamine Blue). It is shown that it is the paraquinoidal holoquinone that is formed. The ascorbimetric determination of certain oxidising agents (I₂, Br₂, IO₃⁻, BrO₃⁻, CrO₄²⁻), using 2-Oxyvariamine Blue and a hexacyanoferrate(II)hexacyanoferrate(III) system is described.     

The influence of coordination geometry and valency on the K-edge absorption near edge spectra of selected chromium compounds

X-ray absorption spectra at the chromium K-edge are reported for a number of selected chromium compounds of known chemical structure. The spectra were obtained with use of synchrotron radiation available at the ectron tretcher ccelerator ELSA in Bonn. The compounds studied include the tetrahedrally coordinated compounds Ca₂Ge_0.8Cr_0.2O₄, Ba₂Ge_0.1Cr_0.9O₄, Sr₂CrO₄, Ca₂(PO₄)_x(CrO₄)_1−xCl (x=0.25,0.5), Ca₅(CrO₄)₃Cl, CrO₃, the octahedrally coordinated compounds Cr(II)-acetate, CrCl₃, CrF₃, Cr₂O₃, KCr(SO₄)₂ · 12H₂O, CrO₂ and cubic coordinated metallic chromium. In these compounds chromium exhibits a wide range of formal oxidation states (0 to VI). The absorption features in the near edge region are shown to be characteristic of the spatial environment of the absorbing atom. The occurrence of a single pre-edge line easily allows one to distinguish between tetrahedral and octahedral coordination geometry, whereas the energy position of the absorption edge is found to be very sensitive to the valency of the excited chromium atom. Calculations of the ionisation potential of Cr in different oxidation states using the non-relativistic Hartree–Fock method (Froese–Fischer) confirm that the ionisation limit shifts to higher energy with increasing Cr valency. More detailed information on the electronic structure of the different compounds is gained by real-space full multiple scattering calculations using the FEFF8 code.     

Emission quenching of binuclear pyrophosphito platinum(II) complexes in aqueous solution by sulphur dioxide. Spectroscopic measurements on sulphur dioxide addition and chromous ion reduction

The emission intensity at 517 nm from Pt₂(pop)₄⁴⁻ (pop = P₂O₅H₂²⁻) is quenched by the addition of sulphur dioxide. The sulphur dioxide coordinates at the axial platinum(II) sites by a η¹-SO₂ bond. This coordination is supported by ³¹p NMR and Raman spectroscopy of aqueous solutions. The electronic spectrum of a sulphur dioxide saturated solution of Pt₂(pop)₄⁴⁻ shows an absorption at 428.5nm ( = 4.1 × 10⁴). From the decrease in the chromophore for uncomplexed Pt₂(pop)₄⁴⁻ the equilibrium constant for SO₂ binding is estimated to be 1.74 M₂l⁻². The effect of adding different quenchers to aqueous solutions of Pt_2(pop)4⁴⁻ is discussed. The compound Pt₂(pop)₄⁴⁻ will undergo 2-electron reduction with chromous ion.     

High surface area nickel aluminate spinels prepared by a sol–gel method

The oxide spinel NiAl₂O₄ and spinel-type solid solutions Al₂O₃–NiAl₂O₄ (at Ni/Al=1:4, and Ni/Al=1:8) were prepared by controlled hydrolysis of mixed metal alkoxides, followed by calcination of the resulting gels. Powder X-ray diffraction showed that all samples prepared were single phase cubic materials having the spinel-type structure. The cubic lattice parameter, a_o, was found to decrease gradually with increasing aluminium content of the mixed metal oxides. The specific surface area (determined by nitrogen adsorption at 77 K) was found to be in the range of 200–300 m² g⁻¹. The materials were found to be basically mesoporous, the most frequent pore radius being in the range 3.2–6.4 nm. IR spectroscopy of CO adsorbed at liquid nitrogen temperature gave a main band at 2186–2195 cm⁻¹, which was assigned to the C---O stretching vibration of surface Al³⁺CO adducts where coordinatively unsaturated Al³⁺ ions act as Lewis acid centres.