Preparation of selective micro glucose sensor without permselective membrane by electrochemical deposition of ruthenium and glucose oxidase

A carbon fiber microelectrode, surface of which ruthenium and glucose oxidase (GOx) were electrochemically codeposited, has been investigated. The Ru deposition onto the microelectrode increased current response to H₂O₂ oxidation, while decreased oxidation currents due to interfering substances, such as ascorbic acid, uric acid, p-acetamidophenol, l-cysteine and dopamine. The codeposition of Ru and GOx gave further suppression of the interfering signals with keeping the current response to H₂O₂. When amperometric glucose sensing was conducted by using the GOx and Ru modified microelectrode, an increase in GOx concentration in the deposition bath enlarged oxidation current of H₂O₂ generated from glucose oxidation by GOx. The presence of ascorbic acid in analyte gave no error in detection of glucose and errors caused by uric acid was +3% at the most for measuring 5 mM glucose, which is the normal physiological level in blood.     

Metallocene monomers and polymers. Ferrocenyl and ferrocenylene derivatives

The synthesis and study of some polyenes, polýiminoimides and Schiff polybases with ferrocene obtained by either polymerization or polycondensation are reported.The following monomers were used: ethynylferrocene, 1-chloro-1′-ethynyl-ferrocene, α-chloro-β-formyl-p-ferrocenylstyrene, p-ferrocenylphenylacetylene, p-ferrocenylacetophenone, 1,1′-diacetylferrocene and 1,1′-bis[β-(2-furyl)acryloyl]ferrocene which were characterized by spectral and thermodifferential analyses and Hückel MO calculations. The polymerization was performed in the presence of benzoyl and lauroyl peroxides, triisopropylboron and complex catalysts of [P(C₆H₅)₃]₂ NiX₂ type. The ferrocene derivatives were polycondensed with biuret, 4,4′-diaminodiphenyl ether, 4,4′-diaminodiphenyl thioether, 4,4′-diamino-2,2′-dinitrodiphenyl disulphide in the presence of metallic salts and p-toluene sulphonic acid as catalysts.Polymers with either linear or tridimensional structure showing good thermal stability and semiconducting properties have been obtained. Some polymers show catalytical activity in the polymerization of chloroformylated vinylic derivatives.     

Synthesis of ferrocene boronic acid-based block copolymers via RAFT polymerization and their micellization,redox responsive and glucose sensing properties

Current study is focused on the synthesis of three novel diblock copolymers poly(2-methacryloyloxy)ethyl ferrocene carboxylate-b-polymethyl vinyl amido phenyl boronic acid, poly(2-methacryloyloxy)ethyl ferrocene carboxylate-b-poly vinylamido phenyl boronic acid and poly(2-methacryloyloxy)ethyl ferrocene carboxylate-b-polystyrene boronic acid using S-methoxycarbonylphenylmethyl dithiobenzoate as reversible addition–fragmentation chain transfer polymerization agent. The synthesized block copolymers were characterized by gel permeation chromatography, fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance spectroscopy, dynamic light scattering, scanning electron microscopy and transmission electron microscopy. Detailed micellization behaviour of poly(2-methacryloyloxy)ethyl ferrocene carboxylate-b-polymethyl vinyl amido phenyl boronic acid (in binary organic solvents mixture and aqueous solution) was studied. Comparative studies of micellization showed that the larger aggregates were obtained in binary organic solvents system than during dialysis in aqueous medium. The redox responsive behaviour of poly(2-methacryloyloxy)ethyl ferrocene carboxylate-b-polymethyl vinyl amido phenyl boronic acid was investigated by water soluble oxidizing (Ammonium cerium nitrate) and reducing (Sodium hydrogen sulphite) agents. Glucose binding/sensing properties of poly(2-methacryloyloxy)ethyl ferrocene carboxylate-b-polymethyl vinyl amido phenyl boronic acid were also explored by micellization. It was found that the increase in polarity and swelling of poly(2-methacryloyloxy)ethyl ferrocene carboxylate-b-polymethyl vinyl amidophenyl boronic acid micelles was due to the redox behaviour of ferrocene, while binding of glucose with boronic acids hydroxyls appears as unimers or small aggregates.     

13C NMR study of polarizations and polarization ranges of vinylene groups in seven series of related compounds

Polarizations, polarization ranges and ratios of polarization ranges for vinylene groups in seven series, namely chalcone derivatives, ferrocene analogues of chalcone, stilbene derivatives, ferrocene analogues of stilbene, and styrene derivatives, were studied. The polarization ranges spanning the intervals between ¹³C NMR chemical shifts of the derivatives substituted by p-NO₂ and p-NMe₂ groups are compared in these related compounds. The influence of the side-chain groups in the vinylene moiety and of the sign of the polarization on the substituent-effect are discussed.     

Click chemistry inspired synthesis of ferrocene amino acids and other derivatives

This work reports the synthesis of a wide range of ferrocenyl-amino acids and other derivatives in excellent yield. Diverse amino acid containing azides were synthesized and ligated to ferrocene employing click reaction to access ferrocenyl amino acids. Chiral alcohols, esters, diols, amines containing azido group were tagged to ferrocene via click reaction to generate ferrocene derived chiral derivatives. A novel strategy for direct incorporation of ferrocene into a peptide and a new route to 1, 1′disubstituted ferrocene amino acid derivative are reported.     

Synthesis,spectroscopic and structural perspective of new ferrocenyl amides

Two new ferrocene derivatives with amide linkages were synthesized by the condensation of 4-ferrocenylaniline with n-alkyl acid chloride derivatives as pristine orange solids in good yields. FTIR and ¹H/¹³C NMR studies have confirmed the basic structure of the molecules with the involvement of intermolecular H-bonding, which together with the ferrocene-like packing ensures the stability of the crystal structure. Crystal structures for both compounds were solved by Rietveld refinements of high resolution X-ray powder diffraction data. The XRD results show that both compounds crystallize in the monoclinic space group P2₁/c. The primary feature of the crystal structure is a double layer of ferrocenyl groups stretched out in the b-c -plane perpendicular to the a-axis, with packing of the ferrocenyl groups occurring in a manner similar to that of pure ferrocene. Despite the close structural similarity, both compounds differ in the optimized geometry of respective Ferrocene conformers. The Cp rings are eclipsed for one Ferrocene conformer and close to staggered for the other, owing to the low energy barrier for the rotation of a cyclopentadienyl ring relative to the rest of the molecule.     

Synthesis of Ferrocene Based Naphthoquinones and its Application as Novel Non‐enzymatic Hydrogen Peroxide

At present, a highly sensitive hydrogen peroxide (H₂O₂) sensor is fabricated by ferrocene based naphthaquinone derivatives as 2,3‐Diferrocenyl‐1,4‐naphthoquinone and 2‐bromo‐3‐ferrocenyl‐1,4‐naphthoquinone. These ferrocene based naphthaquinone derivatives are characterized by H‐NMR and C‐NMR. The electrochemical properties of these ferrocene based naphthaquinone are investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) on modified glassy carbon electrode (GCE). The modified electrode with ferrocene based naphthaquinone derivatives exhibits an improved voltammetric response to the H₂O₂ redox reaction. 2‐bromo‐3‐ferrocenyl‐1,4‐naphthoquinone show excellent non‐enzymatic sensing ability towards H₂O₂ response with a detection limitation of 2.7 μmol/L a wide detection range from 10 μM to 400 μM in H₂O₂ detection. The sensor also exhibits short response time (1 s) and good sensitivity of 71.4 μA mM^?1 cm^?2 and stability. Furthermore, the DPV method exhibited very high sensitivity (18999 μA mM^?1 cm^?2) and low detection limit (0.66 μM) compared to the CA method. Ferrocene based naphthaquinone derivative based sensors have a lower cost and high stability. Thus, this novel non‐enzyme sensor has potential application in H₂O₂ detection.     

Synthesis of the first pentaethynylferrocene derivatives

Starting from a bisprotected ferrocene-1,2,3-triscarbaldehyde, Ohira-alkynylation and Pd-catalyzed protection of the free alkyne with 4-iodotoluene leads to a ferrocene in which one Cp-ring is 1,2,3-substituted by two acetal rings (1,2-position) and an internal alkyne. Metalation of the ferrocene nucleus with sec-BuLi, workup with DMF and reduction with LiAlH₄ leads to a 1,2,3,4-tetrasubstituted ferrocene carrying a hydroxymethyl group. The acetal groups are removed by para-toluenesulfonic acid and the aldehyde groups are converted into arylalkynes. A second metalation followed by workup with DMF furnishes a 1,2,3,4,5-pentasubstituted ferrocenecarbaldehyde. The aldehyde is transformed into an alkyne by the Ohira method and converted to an internal alkyne by Pd-catalyzed reaction with 4-iodotoluene. The sequence gives a 1,2,3,4,5-pentasubstituted ferrocene derivative with four alkyne groups and one hydroxymethyl group. Airless Marko oxidation of the alcohol is followed by another Ohira alkynylation. Pd-catalyzed arylation finishes the reaction sequence to give the symmetrical 1,2,3,4,5-pentakis(4′-tolylethynyl)ferrocene, the first pentaethynylferrocene derivative. A second, similar route was explored that furnished 1,2,3,4,5-pentakis(4′-butylphenylethynyl)ferrocene and its butadiyne-bridged dimer.     

Determination of Oxytetracycline in Food Using a Disposable Montmorillonite and Acetylene Black Modified Microelectrode

Oxytetracycline is a broad-spectrum antibiotic used in animal husbandry that may cause the occurrence of antibiotic residues in food-producing animals. A detailed study of the electrochemical properties of oxytetracycline was carried out at montmorillonite and acetylene black modified carbon paste microelectrode. The oxytetracycline underwent an irreversible oxidation at montmorillonite-acetylene black/carbon paste microelectrode, which was an adsorption-controlled process with one proton and one electron. Using differential normal pulse voltammetry with accumulation at a fixed potential of 0.3 V for 120 s, oxytetracycline yielded a well-defined voltammetric response at 0.6 V in pH 7.4 citric acid–Na₂HPO₄ buffer. Furthermore, the oxidation peak current of oxytetracycline at the montmorillonite–acetylene black/carbon paste microelectrode linearly increased with concentration in the range of 0.5–50 µM with a low detection limit of 87 nM (S/N = 3). This methodology was successfully applied to the determination of oxytetracycline from food samples, suggesting that it has practical applications in monitoring oxytetracycline.     

The Reactivity of Ferrocene and Its Derivatives in the Reaction with Quinines

The reactivity of ferrocene derivatives with respect to p-quinones in acid media has been studied. A tentative mechanism of oxidation of ferrocene with p-qionone in acid media including two-step reduction of p-quinone to hydroquinone is proposed.     

Fluorescence sensors for monosaccharides based on the 6-methylquinolinium nucleus and boronic acid moiety: potential application to ophthalmic diagnostics

Continuous monitoring of glucose levels in human physiology is important for the long-term management of diabetes. New signaling methods/probes may provide an improved technology to monitor glucose and other physiologically important analytes. The glucose sensing probes, BMQBAs, fabricated using the 6-methylquinolinium moiety as a fluorescent indicator, and boronic acid as a chelating group, may have versatile applications in glucose sensing because of their unique properties. In this paper we discuss the design logic, synthesis, characterization and spectral properties of three new isomeric glucose sensors (BMQBAs), and a control compound (BMQ) in the presence and absence of sugars. The sensing ability of the new probes is based on a charge neutralization and stabilization mechanism upon sugar binding. The new probes have attractive fluorescence quantum yields, are highly water-soluble, and have spectral characteristics compatible with cheap and portable LEDs and LDs. One of the probes, o-BMQBA, has a sugar bound pK_a of 6.1, and a dissociation constant K_D of 100 mM glucose. These probes have been designed specifically to respond to tear glucose in a contact lens polymer for ophthalmic glucose monitoring, where the reduced sugar bound pK_a affords for sensing, in a lens environment that we have previously shown to be mildly acidic.     

Microelectrode Electrochemistry in Microemulsion Systems

Abstract

In this paper, we demonstrate the microelectrode electrochemistry of a simple electroactive probe (ferrocene) in SDS/n‐C₄H₉OH/H₂O microemulsion systems. The oxidation of ferrocene within the microemulsion environment was carried out at a Pt microelectrode using a three‐electrode assembly with a Pt wire acting as an auxiliary electrode and an Ag wire as the pseudo‐reference electrode. Excellent Nernstian electrochemical responses were observed. The well‐defined reversible electrochemical responses facilitated the measurement of the self‐diffusion coefficient of microemulsion droplets and introduced the possibility of probing the structural changes of microemulsion systems.     

A sensor for the in situ determination of acidity levels in concentrated sulfuric acid

A potentiometric method at imposed weak current between two paste electrodes, ferrocene and chloranil, permits the in situ determination of sulfuric acid concentrations (0.5–11.0 M). The different factors affecting the potential at imposed current as current intensity, temperature and H⁺ ion concentration are studied. The potentials measured between ferrocene and chloranil electrodes are directly linked to the acid concentration. The acidity R_i(H) function, which represents the determination of the H⁺ activity has been determined and compared to Strehlow R_o(H), Janata H_GF and Hammet H_o functions. R_i(H) is numerically equal to the thermodynamic R_o(H). Received: 19 October 1998 / Revised: 22 March 1999 / Accepted: 23 March 1999     

Highly specific-glucose fluorescence sensing based on boronic anthraquinone derivatives via the GOx enzymatic reaction

The boronic acid anthraquinones, oHAQB and pHAQB, have been designed, and demonstrated to serve as fluorogenic biosensors for glucose. The sensory molecule, oHAQB, has exhibited the specific-glucose sensing via the GOx enzymatic reaction. In this contribution, the fluorescence changes of oHAQB reasonably correspond to the concentration of glucose upon the conversion of boronic acid to hydroxy based sensor by H₂O₂ generated from glucose along with GOx enzymatic reaction. Our sensing ensemble was then successfully applied to determine the glucose concentration in the range of 0.08–0.42 mM. The limit of detection (LOD) of oHAQB for glucose detection using the GOx enzymatic probe is approximately 0.011 mM.     

A sensor for the in situ determination of acidity levels in concentrated sulfuric acid

A potentiometric method at imposed weak current between two paste electrodes, ferrocene and chloranil, permits the in situ determination of sulfuric acid concentrations (0.5–11.0 M). The different factors affecting the potential at imposed current as current intensity, temperature and H⁺ ion concentration are studied. The potentials measured between ferrocene and chloranil electrodes are directly linked to the acid concentration. The acidity R_i(H) function, which represents the determination of the H⁺ activity has been determined and compared to Strehlow R_o(H), Janata H_GF and Hammet H_o functions. R_i(H) is numerically equal to the thermodynamic R_o(H). Received: 19 October 1998 / Revised: 22 March 1999 / Accepted: 23 March 1999     

Carbon Cavity Microelectrode for Electrical Wiring of Enzyme by Insoluble Electroactive Species in Aqueous Media

The carbon cavity microelectrode (CME), exhibiting a volume of 4×10^?6 cm³, offers a genuine alternative for immobilizing and connecting enzymes in aqueous electrolytes by powder of insoluble redox materials. In the present work, the electrochemical behavior of two redox species such as ferrocene (Fc) and tetrathiafulvalene (TTF) was investigated with CME to evaluate their potentialities in the electrical wiring of enzymes. For this purpose, powder of two enzymes, glucose oxidase (GOx) and horseradish peroxidase (HRP), was independently mixed with an insoluble redox material and forced to fill the single micro cavity of a carbon electrode covered by an inert insulator. The presence of the electroactive species, as well as the enzyme wiring was investigated by cyclic voltammetry. The amperometric detection of glucose was carried out by potentiostating the TTF/GOx and the Fc/GOx microelectrodes at 0.25 and 0.35 V respectively. The amperometric detection of H₂O₂ by the TTF/HRP microelectrode was performed at ?0.1 V vs. SCE.     

One Step Fabrication of Microbiosensor Prepared by the Codeposition of Enzyme and Platinum Particles

Abstract

Electrochemical incorporation of enzyme molecules into the growing matrix of platinum black particles is employed for the microfabrication of the enzyme electrode. Two electrochemical processes, i.e., electrochemical adsorption of enzyme molecules and electrolytic (reductive) deposition of metallic microparticles from its complex compound, are simultaneously carried out by using a microelectrode whose diameter is below 50 μm. A glucose sensor, a glucose oxidase-incorporated microelectrode, demonstrates high performance with high sensitivity and fast responsiveness.     

Electron self-exchange reaction of viologen and its derivatives in poly(ethylene glycol)

The electron self-exchange rates (k_ex) of viologen and its derivatives are estimated by using microelectrode voltammetry in poly(ethylene glycol) films. The dependences of supporting electrolyte concentration and sizes of viologen and its derivatives on k_ex and diffusion coefficients (D) are discussed. Results show that k_ex increases with the decrease of supporting electrolyte concentration and sizes of reactants.     

Synthesis, structural characterization and electrochemical study of 1,1′-ferrocenylene labeled amino acids

Unsymmetrical 1,1′-disubstituted ferrocenes bearing an amino acid moiety and a conjugated electron density controlling substituent were synthesized conveniently starting from 1,1′-ferrocenedicarbaldehyde. The novel ferrocene amino acid derivatives were completely characterized from their MS, ¹H NMR and ¹³C NMR spectra. Their electrochemical behavior was studied by cyclic voltammetry. Their formal redox potentials E_f were slightly influenced by the nature of the amino acid and mainly by the kind of the ethenyl substituent. Furthermore all the (Z)-isomers exhibited a slight anodic shift compared with the corresponding (E)-isomers.     

Synthesis and characterization of meso-ferrocenylethynyl 5,15-diphenylporphyrins

A series of four meso-ferrocenylethynyl (5,15-diphenylporphyrinato)nickel(II) derivatives have been synthesized by Sonogashira coupling reactions. Three of these compounds contain the electron-withdrawing groups including -CHO, -CHC(CN)₂, and -CCC₆H₄NO₂ at the remaining meso position, with a view to preparing push-pull chromophores, in which ferrocene serves as the electron donor. All the new compounds have been characterized spectroscopically and the molecular structure of one of these porphyrins (compound 11) has also been determined. The studies show that although the ferrocenylethynyl group can extend the π system of the central porphyrin core, the cyclopentadienyl rings of ferrocene are almost orthogonal to the porphyrin ring. This hinders ferrocene serving as a good electron donor in these systems.