Tin-sulfur based catalysts for acetylene hydrochlorination

In the present work, tin-sulfur based catalysts were prepared using Na₂SO₃ and (CH₃SO₃)₂Sn and were tested in acetylene hydrochlorination. Based on the analysis of experiments results, the acetylene conversion of (CH₃SO₃)₂Sn/S@AC is still over 90%after a 50 h reaction, at the reaction conditions of T = 200 ^oC, V_HCl/V_C2H2 = 1.1:1.0 and C₂H₂-GSHV = 15 h^–1. According to the results of X-ray photoelectron spectroscopy (XPS), HCl adsorption experiments, and acetylene temperature programmed desorption (C₂H₂-TPD), it is reasonable to conclude that the interaction between Sn and S not only can retard the oxidation of Sn²⁺ in catalysts but also strengthen the reactant adsorption capacity of tin-based catalysts. Furthermore, results obtained from nitrogen adsorption/desorption and XPS proved that the CH₃SO₃- can effectively decrease the coke deposition of (CH₃SO₃)₂Sn/AC and thus prolong the lifetime of (CH₃SO₃)₂Sn/AC.     

Mössbauer spectra as a “fingerprint” in tin-lithium compounds: Applications to Li-ion batteries

Several Li-Sn crystalline phases, i.e. Li₂Sn₅, LiSn, Li₇Sn₃, Li₅Sn₂, Li₁₃Sn₅, Li₇Sn₂ and Li₂₂Sn₅ were prepared by ball-milling and characterized by X-ray powder diffraction and ¹¹⁹Sn Mössbauer spectroscopy. The analysis of the Mössbauer hyperfine parameters, i.e. isomer shift (δ) and quadrupole splitting (Δ), made it possible to define two types of Li-Sn compounds: the Sn-richest compounds (Li₂Sn₅, LiSn) and the Li-richest compounds (Li₇Sn₃, Li₅Sn₂, Li₁₃Sn₅, Li₇Sn₂, Li₂₂Sn₅). The isomer shift values ranged from 2.56 to 2.38 mm s⁻¹ for Li₂Sn₅, LiSn and from 2.07 to 1.83 mm s⁻¹ for Li₇Sn₃, Li₅Sn₂, Li₁₃Sn₅, Li₇Sn₂ and Li₂₂Sn₅, respectively. A Δ−δ correlation diagram is introduced in order to identify the different phases observed during the electrochemical process of new Sn-based materials. This approach is illustrated by the identification of the phases obtained at the end of the first discharge of η-Cu₆Sn₅ and SnB_0.6P_0.4O_2.9.     

Acetylene hydrochlorination over tin nitrogen based catalysts: effect of nitrogen carbon-dots as nitrogen precursor

The catalysts comprising the main active compounds of Sn-Nx were synthesized using trichlorophenylstannane ((C₆H₅)Cl₃Sn), nitrogen carbon-dots (NCDs), and activated carbon (AC) as starting materials, and the activity and stability of catalysts was evaluated in the acetylene hydrochlorination. According to the results on the physical and chemical properties of catalysts (TEM, XRD, BET, XPS and TG), it is concluded that NCDs@AC can increase (C₆H₅)Cl₃Sn dispersity, retard the coke deposition of (C₆H₅)Cl₃Sn/AC and lessen the loss of (C₆H₅)Cl₃Sn, thereby further promoting the stability of (C₆H₅)Cl₃Sn/AC. Based on the characterization results of C₂H₂-TPD and HCl adsorption experiments, we proposed that the existence of Sn-N_x can effectively strengthen the reactants adsorption of catalysts. By combing the FT-IR, C₂H₂-TPD and Rideal-Eley mechanism, the catalytic mechanism, in which C₂H₂ is firstly adsorbed on (C₆H₅)Cl₃Sn to form (C₆H₅)Cl₃Sn-C₂H₂ and then reacted with HCl to produce vinyl chloride, is proposed.     

Promotional effect of Snad on the ethanol oxidation at Pt3Sn/C catalyst

Oxidation of ethanol was studied at Sn_ad modified and unmodified Pt₃Sn/C and Pt/C catalysts. Pt₃Sn/C and Pt/C catalysts were characterized by XRD. Potentiodynamic and chronoamperometric measurements were used to establish catalytic activity and stability. High activity achieved at Sn_ad modified Pt₃Sn/C catalyst has not been observed at any bimetallic catalyst so far. Promotional effect of Sn_ad on the ethanol oxidation was related to the enhancement of CO oxidation rate in bifunctional mechanism. It was shown that electrodeposited Sn exhibited different effect on the catalytic activity compared to Sn in alloy.     

Selective CO2 Reduction to Ethylene Mediated by Adaptive Small-molecule Engineering of Copper-based Electrocatalysts

Electrochemical CO₂ reduction reaction (CO₂RR) over Cu catalysts exhibits enormous potential for efficiently converting CO₂ to ethylene (C₂H₄). However, achieving high C₂H₄ selectivity remains a considerable challenge due to the propensity of Cu catalysts to undergo structural reconstruction during CO₂RR. Herein, we report an in situ molecule modification strategy that involves tannic acid (TA) molecules adaptive regulating the reconstruction of a Cu-based material to a pathway that facilitates CO₂ reduction to C₂H₄ products. An excellent Faraday efficiency (FE) of 63.6 % on C₂H₄ with a current density of 497.2 mA cm⁻² in flow cell was achieved, about 6.5 times higher than the pristine Cu catalyst which mainly produce CH₄. The in situ X-ray absorption spectroscopy and Raman studies reveal that the hydroxyl group in TA stabilizes Cu^δ+ during the CO₂RR. Furthermore, theoretical calculations demonstrate that the Cu^δ+/Cu⁰ interfaces lower the activation energy barrier for *CO dimerization, and hydroxyl species stabilize the *COH intermediate via hydrogen bonding, thereby promoting C₂H₄ production. Such molecule engineering modulated electronic structure provides a promising strategy to achieve highly selective CO₂ reduction to value-added chemicals.     

Study of activated carbon supported iron catalysts for the Fischer-Tropsch synthesis

Summary Characterization (BET and TPD) and reaction studies were conducted with activated carbon supported iron catalysts (Fe/AC) used for the Fischer-Tropsch synthesis (FTS). The TPD study showed that there existed interactions between metals and the AC surface. Greater association of Cu and K promoters with the AC surface resulted in stronger promoter to surface interaction, which enhanced the H₂ desorption ability of the Cu and K promoted Fe/AC catalyst prepared under vacuum impregnation (VI). Catalytic behavior of a Fe/AC catalyst (VI-15 Fe/2 Cu/2 K/81 AC, in parts per weight) was studied in a 1-liter slurry phase continuous stirred tank reactor. The catalyst presented moderate syngas conversion (44.3-60.6%) and high gaseous selectivity (CH₄, 12.8-15.1% and C₂-C₄, 42.4-46.1%) under 304^oC, 3.0 MPa, 1.1 L(STP)/g-cat/h, and H₂/CO = 2.0 during 166 h of testing. Detectable hydrocarbons up to C₁₈ were formed on the Fe/AC catalyst.     

Catalytic activity of bimetal-containing Co,Pd systems in the oxidation of carbon monoxide

The catalytic activity of low-percentage Co,Pd systems on ZSM-5, ERI, SiO₂, and Al₂O₃ supports in the oxidation of CO was studied. The activity of bimetal-containing catalysts was shown to depend on the nature of the catalyst and the amount and ratio of their active components. According to the results of thermoprogrammed reduction with H₂ (H₂ TPR) and X-ray photoelectron spectroscopy (XPS) data, the metals are distributed as isolated cations or Co^δ+-O-Pd^δ+ clusters with cobalt and palladium cations surrounded by off-lattice oxygen in Co,Pd systems. The 0.8% Co,0.5% Pd-ZSM-5 bimetal catalysts were found to be more active due to the presence of clusters.     

Thermally Stable Heterobinuclear Bivalent Group 14 Metal Complexes Ar2M−Sn[1,8-(NR)2C10H6] (M=Ge,Sn; Ar=2,6-(Me2N)2C6H3; R=CH2tBu)

The first thermally robust Ge ^II −Sn ^II compound 1 and the structurally characterized Sn^II-Sn^II analogue 2 , which maintain their structural integrity in solution, were obtained by treating MAr₂ (M=Ge, Sn; Ar=2,6-(Me₂N)₂C₆H₃) with Sn[1,8-(NR₂)₂C₁₀H₆] (R=CH₂tBu). On the basis of structural and spectroscopic data, the M−Sn bond is regarded as the interaction of a MAr₂ donor with an Sn[1,8-(NR₂)₂C₁₀H₆] acceptor.     

Chemical diffusion in intermediate phases in the lithium-tin system

The compositional variation of the chemical diffusion coefficient in the six intermediate phases LiSn, Li₇Sn₃, Li₅Sn₂, Li₁₃Sn₅, Li₇Sn₂, and Li₂₂Sn₅ of the lithium-tin system at 415°C has been measured. Among these intermediate phases, the phase Li₁₃Sn₅ has the highest chemical diffusion coefficient, varying with composition from 5.01 × 10^?5 to 7.59 × 10^?4 cm²/sec at that temperature. Combining this information with coulometric titration curves (emf versus composition), the self-diffusion coefficient of lithium has also been determined in the various intermetallic phases as a function of composition under the assumption that the tin atoms do not move appreciably compared with the lithium atoms. The lithium self-diffusion coefficient in the phase LiSn is lower than those in the more lithium-rich phases by one order of magnitude. This result is discussed in terms of the difference between the crystal structures of LiSn and the other lithium-rich phases in the lithium-tin system.     

Synthesis and Structure of the Bicyclic [Sn4Se11]6– Anion in Na6Sn4Se11 · 22 H2O

Na₆Sn₄Se₁₁ · 22 H₂O can be crystallised at –8 °C as yellow‐orange needles from the 1 : 2 H₂O/CH₃OH mother liquor of a superheated reaction mixture of NaOH(s), Sn and Se. The bicyclic [Sn₄Se₁₁]^6– anion exhibits crystallographic C₂ symmetry and is composed of corner‐bridged SnSe₄ tetrahedra. Two opposite tin atoms of an Sn₄Se₄ 8‐membered ring are linked by a common Se atom, thereby affording two 6‐membered boat‐shaped Sn₃Se₃ rings with a shared Sn–Se–Sn bridging unit. [Sn₄Se₁₁]^6– thus represents the immediate precursor of the well‐known adamantane‐like [Sn₄Se₁₀]^4– anion.     

Rational Design of Microporous MOFs with Anionic Boron Cluster Functionality and Cooperative Dihydrogen Binding Sites for Highly Selective Capture of Acetylene

Separation of acetylene (C₂H₂) from carbon dioxide (CO₂) or ethylene (C₂H₄) is important in industry but limited by the low capacity and selectivity owing to their similar molecular sizes and physical properties. Herein, we report two novel dodecaborate‐hybrid metal–organic frameworks, MB₁₂H₁₂(dpb)₂ (termed as BSF‐3 and BSF‐3‐Co for M=Cu and Co), for highly selective capture of C₂H₂. The high C₂H₂ capacity and remarkable C₂H₂/CO₂ selectivity resulted from the unique anionic boron cluster functionality as well as the suitable pore size with cooperative proton‐hydride dihydrogen bonding sites (B?H^δ????H^δ+?C≡C?H^δ+???H^δ??B). This new type of C₂H₂‐specific functional sites represents a fresh paradigm distinct from those in previous leading materials based on open metal sites, strong electrostatics, or hydrogen bonding.     

[Bis­(trimethylsilyl)amido‐κN]{tert‐butyl[(E)‐2‐(tert‐butyl­imino)­ethyl]amido‐κ2N,N′}tin(II), a key inter­mediate in the synthesis of 1,3‐di‐tert‐butyl‐2,3‐dihydro‐1H‐1,3,2‐diaza­stannole

The title compound, [Sn(C₁₀H₂₁N₂)(C₆H₁₈NSi₂)], contains the Sn^II centre in a trigonal–pyramidal geometry. The basal plane is formed by three N atoms and the fourth apical position is occupied by a stereoactive lone pair. The Sn atom is displaced from the plane of the three N atoms by 1.1968 (12) Å. The Sn—N bonds are highly polarized toward the N atoms, as confirmed by natural bonding orbital analysis.     

Nitrosubstituted hydroxamate ligands in new triphenyltin(IV) complexes as prospective antimicrobial agents

New triphenyltin(IV) hydroxamate complexes, [Ph₃Sn(4-NO₂CnH)] and [Ph₃Sn(4-NO₂BzH)] have been synthesized by the reactions of Ph₃SnCl with potassium 4-nitrocinnamo hydroxamate [4-NO₂C₆H₄CHCHCONHOK] (KHL¹) and potassium 4-nitro benzohydroxamate [4-NO₂C₆H4CONHOK] (KHL²). The complexes were synthesized in 1:1 molar ratio in MeOH?+?C₆H₆ and characterized by physicochemical and IR, ¹H NMR, and mass spectrometry. The bidentate hydroxamate involving bonding through carbonyl and hydroxamic oxygen (O, O coordination) has been inferred from IR spectra. The electrochemical behavior of complexes has been analyzed. Quasi-irreversible two electron metal-centered cathodic process of type Sn^IV/Sn^II redox couple was indicated by cyclic voltammetric technique. The thermal behavior of 1 and 2 studied by TGA has shown continuous decomposition to yield Sn + 0.5SnO₂ and SnO₂ as final residues. The in vitro antimicrobial activity assays of 1 and 2 against pathogenic Gram-positive bacteria (Bacillus subtilis and Staphylococcus aureus), Gram-negative bacteria (Salmonella typhi and Pseudomonas aeruginosa), and fungi (Aspergillus fumigatus and Alternaria alternata) were done by MIC method. The complexes have exhibited appreciable antimicrobial activity relative to the respective standard Gentamycin and Nystatin drugs.     

Ansa‐Complexes of [Mn(η5‐C5H5)(η6‐C6H6)]: Preparation,Characterization, and Reactivity of [n]Manganoarenophanes (n=1, 2, 3)

We report the synthesis of [n]manganoarenophanes (n=1, 2) featuring boron, silicon, germanium, and tin as ansa‐bridging elements. Their preparation was achieved by salt‐elimination reactions of the dilithiated precursor [Mn(η⁵‐C₅H₄Li)(η⁶‐C₆H₅Li)]?pmdta (pmdta=N,N,N′,N′,N′′‐pentamethyldiethylenetriamine) with corresponding element dichlorides. Besides characterization by multinuclear NMR spectroscopy and elemental analysis, the identity of two single‐atom‐bridged derivatives, [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] and [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SiPh₂], could also be determined by X‐ray structural analysis. We investigated for the first time the reactivity of these ansa‐cyclopentadienyl–benzene manganese compounds. The reaction of the distannyl‐bridged complex [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)Sn₂tBu₄] with elemental sulfur was shown to proceed through the expected oxidative addition of the Sn?Sn bond to give a triatomic ansa‐bridge. The investigation of the ring‐opening polymerization (ROP) capability of [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] with [Pt(PEt₃)₃] showed that an unexpected, unselective insertion into the C_ipso?Sn bonds of [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] had occurred.     

Chloro­di­methyl(N‐methyl­pyrrolidin­one)­tin(IV)‐μ‐chloro‐di­chloro­di­methyl­tin(IV)

The synthesis and the X‐ray structural analysis of the title compound, μ‐chloro‐1:2κ²Cl‐tri­chloro‐1κCl,2κ²Cl‐tetra­methyl‐1κ²C,2κ²C‐(N‐methyl­pyrrolidin‐2‐one)‐1κO‐ditin(IV), [Sn₂Cl₄(CH₃)₄(C₅H₉NO)], are described. The title compound is found to exhibit a distorted trigonal–bipyramidal geometry at both Sn^IV atoms. The Sn—Cl—Sn angle involving the bridging chlorine ligand is 135.56 (5)°, with the Sn—Cl bond lengths being 2.5704 (13) and 3.1159 (13) Å.     

Unusual electronic state of tin dopant atoms in surface layers of NiTiO<Subscript>3</Subscript>

The ¹¹⁹Sn Mössbauer spectra of polycrystalline NiTiO₃ samples impregnated with a solution containing 0.3 at % Sn⁴⁺ are evidence that annealing in H₂ converts tin into the state with the electron density |Ψ(0)|² on ¹¹⁹Sn nuclei corresponding to “Sn³⁺” ions. The stabilization of tin atoms in such an untypical formal oxidation state occurs at a depth of no more than 2–3 nm from the surface of titanate crystallites. It was revealed that the Sn³⁺ ions are not subjected to spin polarization even at temperatures considerably lower than the Néel temperature of NiTiO₃, which can be explained by their location in the Ni²⁺ positions. The formation of Sn3+ prevents the further reduction of tin to the divalent state and, hence, precludes localization of ¹¹⁹Sn probe cations in positions at the interface.     

Relationship between Pt particle size and catalyst activity for catalytic oxidation of ultrahigh‐concentration formaldehyde

The effects of particle size and kinetics of Pt/activated carbon (AC) catalysts on catalytic oxidation of formaldehyde (HCHO) were investigated. AC, f‐SiO₂ and MCM‐41 were used as supports to prepare low‐Pt‐content catalysts using H₂ reduction. Pt/AC catalyst shows the highest activity with the largest Pt particle size. By contrast, 0.1 wt% Pt/AC reduced using KBH₄ has much higher activity than that reduced using H₂, which can oxidize HCHO completely over 6000 ppm at 60°C in a fixed bed reactor. Transmission electron microscopy and X‐ray photoelectron spectroscopy results indicate that Pt/AC‐KBH₄ has larger Pt particles and lower valence state than Pt/AC‐H₂, which may be attributed to the ligand effect between Pt⁴⁺ and the AC support. The result of O₂ temperature‐programmed oxidation suggests that highly dispersed Pt⁴⁺ ions have stronger interaction with AC support and thus are harder to be reduced by H₂. Furthermore, Pt/AC is structure‐sensitive and larger‐sized Pt particles result in a high conversion of HCHO. Investigation of kinetics indicated that it is a zero‐order reaction for such a high HCHO concentration condition for Pt/AC‐KBH₄.     

Hydrolysis and chemical speciation of (C2H5)2Sn2+, (C2H5)3Sn+ and (C3H7)3Sn+ in aqueous media simulating the major composition of natural waters

The hydrolysis of (C₂H₅)₂Sn²⁺, (C₂H₅)₃Sn⁺ and (n‐C₃H₇)₃Sn⁺ has been studied, by potentiometric measurements ([H⁺]‐glass electrode), in NaNO₃, NaCl, NaCl/Na₂SO₄ mixtures and in a synthetic seawater (SSWE), as an ionic medium simulating the major composition of natural seawater, at different ionic strengths (0 ≤ I ≤ 5 mol dm^?3) and salinities (15 ≤ S ≤ 45), and at t = 25 °C. Five hydrolytic species for (C₂H₅)₂Sn²⁺, three for (C₂H₅)₃Sn⁺ and two for (C₃H₇)₃Sn⁺ are found. Interactions with the anion components of SSWE, considered as single‐salt seawater, are determined by means of a complex formation model. A predictive equation for the calculation of unknown hydrolysis constants of trialkyltin(IV) cations, such as tributyltin(IV), in NaNO₃, NaCl, and SSWE media at different ionic strengths is proposed. Equilibrium constants obtained are also used to determine the interaction parameters of Pitzer equations. Copyright © 2001 John Wiley & Sons, Ltd.     

Clay-Supported Molybdenum-Based Catalysts for Higher Alcohol Synthesis from Syngas

A kind of clay-supported K-Co-Mo catalyst was prepared by a sol-gel method combined with incipient wetness impregnation. The catalyst structure was characterized by X-ray diffraction, N₂ adsorption-desorption, H₂ temperature-programmed reduction, and X-ray photoelectron spectroscopy techniques and its catalytic performance for higher alcohol syn-thesis from syngas was investigated. The active components has a high dispersion on the clay support surface. The increase of the Mo loading promoted reduction of M⁶⁺ but had no signi cant in fluence on the reduction of Mo⁴⁺ and Co²⁺ species. After reduction, a kind of lower state Mo^δ+ (1<δ<4) species was observed on the surface. Compared with the unsupported catalyst, the clay supported K-Co-Mo catalysts showed much higher catalytic performance for alcohol formation. The reason can be explained that the supported catalyst have a high active surface area and the mesoporous structure prolonged the residence time of intermediates for alcohol formation to some extent, which promoted the formation of higher alcohols. The high activity of the catalyst reduced at 773 K may be attributed to the high content of Mo^δ+ (1<δ<4) species on the surface, which was regarded as the active site for the adsorption of nondissociative CO and responsible for the alcohol formation.     

Electronic state and local surrounding of <Superscript>119</Superscript>Sn in calcium-substituted holmium orthochromites

The influence of Ca²⁺ doped into the holmium sublattice on the magnetically active surrounding of Sn⁴⁺ ions located in the chromium sublattice of Ho_1–x Ca _x Cr_0.997Sn_0.003O₃ (x = 0, 0.003, and 0.1) compounds was studied by ¹¹⁹Sn Mössbauer spectroscopy. At concentrations [Ca] = [Sn] = 0.3 mol %, an increase was observed in the spectral contribution of Sn⁴⁺ sites, having the full number of nearest-neighbor Cr³⁺cations (n = 6), where they perceived a magnetic field H(Sn)_{4.2 K} = 82 kOe, compared to the contribution of the relevant sites in the undoped chromite (x = 0). This observation was interpreted as resulting from a reduced probability of appearance of Cr³⁺ vacancies in the nearest surrounding of heterovalent Sn⁴⁺ ions. For x = 0.1, on the contrary, the ¹¹⁹Sn spectrum revealed a reduced contribution from the Sn⁴⁺ sites with n = 6. This evolution is shown not to be due neither to the appearance of Cr⁴⁺ nor Cr⁶⁺ ions in the nearest neighborhood of Sn⁴⁺ in the chromium sublattice to balance the charge deficiency of the Ca²⁺ ions doped into the holmium sublattice. This allowed us to suggest that the observed effect was due to the onset of Sn⁴⁺ segregations in the structure of Ho_0.9Ca_0.1Cr_0.997Sn_0.003O₃, which contained a far greater amount of Ca²⁺ ions whose charge deficiency was balanced mostly by Cr⁴⁺ formation. Studies of samples that were prepared under a hydrogen atmosphere revealed the reduction of Sn⁴⁺ to the oxidation state +2, with the concomitant stabilization of the formed Sn²⁺ ions on crystallite surfaces on sites having low coordination numbers.