首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 78 毫秒
1.
刘自力  刘红梅 《分子催化》2007,21(6):550-555
采用固相合成法制备了Bi2O3-WO3光催化剂,研究了Bi2O3-WO3光催化与臭氧氧化协同降解糖蜜酒精废水的多相催化降解过程,并采用X射线衍射光谱(XRD)、紫外漫反射光谱(DRS)、热重-差热扫描(TG-DSC)等手段对Bi2O3-WO3催化剂进行了表征.研究发现:Bi2O3-WO3是一性能良好的光催化剂,臭氧强化了Bi2O3-WO3光催化氧化过程,反应2 h后,糖蜜酒精废水的脱色率可达90.2%.Bi2O3-WO3光催化剂的禁带宽度为2.92 eV,其中γ-Bi2WO6和Bi2W2O9是其活性中心.焙烧温度对Bi2O3-WO3光催化剂的活性有较大的影响,其中1 073 K为适宜的焙烧温度.  相似文献   

2.
全球工业化进程的加快使人们饱受环境污染问题的困扰.半导体光催化技术作为一种高效、绿色、有潜力的新技术,在环境净化方面有着广阔的应用前景.Bi2O4是近年来新开发出的一种铋基光催化剂,在环境净化方面已有一些研究.但是,单体光催化剂通常存在光响应范围窄、光生载流子复合率高等问题,这些不足限制了Bi2O4的进一步应用.因此,需要通过适当的改性来拓宽其光响应范围和提高其载流子的分离效率,从而提高其光催化活性.构建Z型异质结被认为是提高光催化剂光生载流子分离效率并进一步提高光催化活性的有效方法.MoO3是一种宽禁带的n型半导体,具有独特的能带结构、光学特性和表面效应,是一种非常有前景的半导体光催化剂.虽然MoO3材料的光生载流子复合率高,带隙(2.7-3.2 eV)大,不利于其参与光催化反应,但MoO3与其他合适的半导体配位形成复合材料后能够有效提高其光生载流子的分离效率,从而提高其光催化活性.本研究采用简单的水热法制备了一种新型Z型MoO3/Bi2O4复合光催化剂,SEM和TEM分析结果表明,MoO3和Bi2O4紧密结合在一起.X射线光电子能谱分析表明,MoO3和Bi2O4之间存在很强的界面相互作用,这有助于电荷转移和光生载流子的分离.光致发光光谱、电阻抗和光电流测试也证明了MoO3/Bi2O4复合光催化剂的光生载流子分离效率更高,形成了更强的光电流.通过在可见光下降解RhB溶液评价了所合成光催化剂的光催化性能.15%MoO3/Bi2O4(15-MB)复合光催化剂表现出了最佳的可见光催化活性,在40 min内对10 mg/L RhB溶液的降解率达到了99.6%,其降解速率是Bi2O4的2倍.此外,15-MB复合光催化剂在经过五次循环降解RhB溶液后仍保持良好的光催化活性和稳定性,表明MoO3/Bi2O4复合光催化剂具有较强的应用潜力.通过自由基捕获实验确定了光催化反应中主要的活性自由基为 O2-和h+.通过莫特-肖特基测试和带隙计算得到MoO3和Bi2O4的价带和导带位置.最后,根据实验和分析结果提出了Z型MoO3/Bi2O4复合光催化剂在可见光下降解RhB溶液的机理.本研究为设计铋基Z型异质结光催化剂用于高效去除环境污染物提供了一种有前景的策略.  相似文献   

3.
采用简单混合法制备了一系列Bi2O3/Bi2WO6复合光催化剂.在紫外光降解水中苯酚的过程中,Bi2O3/Bi2WO6的光催化活性随Bi2O3含量的增加呈现先增大后减小的趋势.当Bi2O3最佳负载量等于12.5%(质量分数,w)时,该复合光催化剂的活性大约是单一Bi2WO6的4倍.固体样品表征表明,Bi2O3主要以β-Bi2O3存在,复合光催化剂是Bi2O3和Bi2WO6的简单混合物.此外,在电催化氧化水的过程中,β-Bi2O3/Bi2WO6薄膜电极的光电流远大于β-Bi2O3和Bi2WO6薄膜电极的光电流之和.Bi2O3对Bi2WO6光催化的促进作用是由于前者接受后者的光生空穴,提高Bi2WO6光生载流子的分离效率,从而加快了O2的还原和苯酚的降解.  相似文献   

4.
光催化作为一种环境友好型、低能耗的技术,在环境净化等领域倍受关注.传统光催化剂,如TiO2,ZnO,V2O5和WO3等具有较高的光敏性,其价格低廉,自然无毒,常用于光电反应的应用当中.然而,这些催化剂具有较宽的禁带宽度,只能在紫外光下响应.为此,设计一种较窄带隙的高可见光活性的光催化剂具有一定的意义.近年来,氯氧化铋光催化剂受到了越来越多的关注,其在紫外光下具有非常优异的光催化性能.并且,研究者们已成功合成出非化学计量比的氯氧化铋,如Bi3O4Cl(2.60 eV),Bi12O17Cl2(2.10 eV),Bi12O15Cl6(2.86 eV)和Bi24O31Cl10(2.70 eV)等光催化剂.研究表明,较低的Cl/O比可能会减小催化剂的带隙宽度,并提高其光催化性能;其中Bi12O17Cl2的Cl/O比最小,是最有潜力的氯氧化铋光催化剂.然而,Bi12O17Cl2具有较高的光生电子空穴复合率,会极大的减弱其光催化活性.因此,将Bi12O17Cl2与具有高稳定性,结构相似且空穴复合率低的Bi OCl相结合,将会极大提高在可见光下Bi12O17Cl2的光催化活性.本文采用了超声水热法成功制备了具有高可见光催化活性的Bi OCl-Bi12O17Cl2纳米复合材料,用于去除染料和药物废水.扫描电子显微镜和比表面积分析仪的结果表明,纳米复合材料具有良好的分散性,结构为花瓣形状,其平均厚度为20至50 nm,且具有较高的比表面积.紫外-可见漫反射和光致发光光谱分析表明,纳米复合材料具有良好的可见光吸收性能,并且光生电子空穴复合率远低于Bi12O17Cl2.其在可见光下降解罗丹明B(/环丙沙星)的动力学常数分别约为Bi12O17Cl2,BiOCl和P25的8.14(/4.94),64.66(/11.91)和42.63(/36.07)倍.合适的形态,结构和光电性能是此纳米复合光催化剂具有优异光催化性能的原因.此外,该催化剂还显示出较宽的pH适用范围和优异的可重复利用性,有利于实际利用.机理研究表明,降解罗丹明B的主要活性物质是光生空穴和超氧自由基.总之,本文开发了一种绿色、稳定、高效的可见光光催化剂,对BiOCl基的光催化剂的研究作出了一定的贡献.  相似文献   

5.
采用自制的Bi2O3及氮掺杂Bi2O3(N-Bi2O3)光催化剂,以卤钨灯为光源,在可见光下对2,4-二氯酚进行光催化降解.结果表明,N-Bi2O3较Bi2O3具有更高的可见光催化活性.当N-Bi2O3光催化剂投加量为2.0 g/L、2,4-二氯酚初始浓度为20 mg/L和pH =7时,光催化反应320 min,2,4-二氯酚的降解率最高可达到91.5%.2,4-二氯酚的光催化反应初活性与其浓度之间的关系符合Langmuir-Hinshelwood动力学速率模型.对降解过程中总有机碳及Cl-测试结果表明,N-Bi2O3光催化剂能较好地完成对2,4-二氯酚的深度矿化及脱氯.  相似文献   

6.
利用半导体光催化剂Bi2 O3对含亚硝酸盐废水的处理进行了研究 ,并讨论了影响亚硝酸盐氧化率的主要因素 .实验结果表明 :选择活性较高的Bi2 O3作为光催化剂 ,当其用量为 0 .0 50 g ,试液 pH =3 .70 ,NO2 - —N起始浓度为4 0 0 .0mg/L ,光照 1h时 ,亚硝酸盐的氧化率达到 97.0 % .  相似文献   

7.
采用水热法制备Bi2WO6-BiPO4异质结光催化剂.利用模拟太阳光照射下的罗丹明B降解实验评价了Bi2WO6-BiPO4复合物的光催化性能.结果表明,Bi2WO6-BiPO4光催化活性比Bi2WO6和BiPO4高得多.当Bi2WO6与BiPO4的摩尔比为1:1时复合光催化剂对罗丹明B的降解率最高.Bi2WO6-BiPO4催化活性增强主要归结为两者之间形成了有效的异质结结构,其内建电场能够促进光生载流子的分离.同时,Bi2WO6的加入增强了其对可见光的吸收.研究表明O2^· -和h^+在光催化降解过程中是主要的活性物种.  相似文献   

8.
采用水热法制备了一系列Bi2WO6/Zn O异质结光催化剂,并对其进行X射线衍射(XRD)、紫外-可见光谱(UV-Vis DRS)、扫描电镜(SEM)、光电子能谱(EDS)等手段对其结构性质进行了表征。在含酚废水的液相反应体系中,研究了异质结Bi2WO6/Zn O复合光催化剂光催化降解苯酚的性能。结果表明,Bi2WO6/Zn O异质结的形成可以有效的抑制光生电子和空穴对的结合,使其光催化活性明显优于纯的Zn O和Bi2WO6;另外,异质结型Bi2WO6/Zn O复合光催化剂的表面OH·自由基更有利于光催化活性的提高。当Bi2WO6复合量为4wt%时,异质结Bi2WO6/Zn O复合光催化剂光催化降解苯酚的效果最佳。  相似文献   

9.
半导体光催化技术是一种环境友好技术,它既能在温和条件下应用于环境领域——利用光能降解有机和无机污染物,又可应用于能源领域——将低密度的太阳能转化为高密度的洁净能源,因而在解决环境污染和能源匮乏问题方面展现出巨大的应用潜力.最近,一种新型Bi基光催化剂,Bi OIO3,表现出优异的紫外光催化性能.它由层状[Bi2O2]2+和[IO3]-组装而成,带隙为3.1 e V左右.然而,其较大的带隙限制了其对太阳光的利用.近年来,多种方法如金属掺杂、非金属掺杂、半导体复合、光敏化改性和加氢处理被用来提高半导体的光催化效率.其中,以Ag/AgX(X=Cl,I和Br)作为助催化剂可提高体系的可见光吸收和载流子的分离能力,从而增强光催化性能.基于此,我们设计并合成了一种新型的三元光催化剂.首先采用水热法合成了Bi OIO3纳米片,然后在室温条件下原位引进Ag/Ag Cl,制备了Ag/Ag Cl/Bi OIO3三元异质结构.与Ag/Ag Cl和纯的Bi OIO3相比,该三元Ag/Ag Cl/Bi OIO3复合物光催化剂对NO表现出优异的可见光光催化去除性能.本文采用X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描式电子显微镜(SEM)、电化学测试(光电流和阻抗谱)和紫外-可见漫反射光谱(UV-Vis)等表征手段研究了Ag/Ag Cl/Bi OIO3光催化性能增强的机制.SEM结果表明,制备的Ag/Ag Cl/Bi OIO3三元复合物为纳米颗粒和纳米片形貌,Ag/AgC l的引入对Bi OIO3形貌影响不大.XRD和XPS测试结果表明,与纯的Bi OIO3相比,随着Ag/AgC l的加入,复合物的峰位置发生了明显位移,表明Ag,AgC l和Bi OIO3三组分间存在强的相互作用.光电流响应图谱表明,随着Ag/Ag Cl的加入,Ag/Ag Cl/Bi OIO3的光电流强度明显增强,同时阻抗谱的圆弧直径明显减小,表明电子和空穴的分离能力增强.UV-Vis图谱中,Bi OIO3在可见光区几乎没有吸收,而三元复合物表现出明显的可见光吸收,且随着Ag/AgC l量的增加,复合物的可见光吸收增强,该吸收归结于复合物中Ag的表面等离子体吸收.结合之前报道的光催化剂体系如Ag/Ag Cl和Ag/Ag Cl/Ti O2,我们提出了Ag/Ag Cl/Bi OIO3复合物光催化剂性能增强的机制.在可见光照射下,Ag0因其表面等离子体吸收而产生电子空穴对.由于功函数不同,Ag和Bi OIO3之间形成肖特基势垒.电子从Ag0表面转移到Bi OIO3的导带上,Bi OIO3导带上电子的电势不足以把O2氧化成·O-2,但电子能以多电子的形式与O2和H+生成水.同时,Ag0表面的空穴能将AgC l表面的Cl-氧化成Cl0.光照诱导AgC l表面的部分Ag+离子被还原,所以AgC l粒子的表面带负电荷.Cl0是活性自由基,能够氧化去除NO,反应之后自身被还原成Cl-.由此可见,在三元复合光催化剂中,Ag0在可见光照射下因其表面等离子体效应产生电子空穴对,随后Bi OIO3有效地分离了光生载流子,使得复合材料能有效地利用光生电子和空穴.故三元Ag/Ag Cl/Bi OIO3复合物光催化剂增强的光催化性能可归结于Ag的表面等离子体吸收和Bi OIO3的载流子分离能力.该结果有助于设计和制备具有优异的光催化性能的Bi OIO3基材料.  相似文献   

10.
以Bi(NO3)3·5H2O、Na OH、Ti(OC4H9)4为原料,采用水热法制备Bi0.5Na0.5Ti O3纳米光催化剂。用XRD、TEM表征了Bi0.5Na0.5Ti O3光催化剂的结构和形貌。以亚甲基蓝为模型污染物,考察了不同浓度的Na OH对Bi0.5Na0.5Ti O3晶体在紫外光和可见光照射下光催化活性的影响。通过荧光技术研究了Bi0.5Na0.5Ti O3光催化剂表面羟基自由基的生成,探究了清除剂对光催化降解污染物活性的影响。结果表明:Na OH的浓度对Bi0.5Na0.5Ti O3光催化剂的紫外光和可见光活性有很大的影响,当Na OH浓度为8mol·L-1时制备的Bi0.5Na0.5Ti O3晶体光催化活性最高,光照1h,亚甲基蓝的紫外及可见光催化降解率分别达到69.8%、53.4%,在光催化降解过程中·O2ˉ和·OH起主要作用,尤其是·O2-起了重要作用。  相似文献   

11.
The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.  相似文献   

12.
非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。  相似文献   

13.
翟宗玺  刘树深  夏树屏 《化学学报》1990,48(10):946-950
用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。  相似文献   

14.
Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.  相似文献   

15.

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

  相似文献   

16.
Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.  相似文献   

17.
In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.  相似文献   

18.
Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, Mo, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.  相似文献   

19.
20.
The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe2O3. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号