Study of Forced Degradation Behaviour of Brinzolamide Using LC–ESI–Q-TOF and In Silico Toxicity Prediction

Brinzolamide (BZA) is a topical ophthalmic drug which is generally used to lower the intraocular pressure during glaucoma. It was subjected to forced degradation studies under hydrolytic (acidic, basic), oxidative, photolytic and thermal stress conditions; the drug degraded significantly in hydrolytic and oxidative conditions, leading to the formation of seven degradation products in total. It was stable on exposure to light and dry heat in the solid state. An ultra-performance liquid chromatography (UPLC) method was developed on a Waters CSH phenyl hexyl column (100 × 2.1 mm, 1.7 µm), using gradient elution of 0.1 % formic acid and methanol as mobile phase. The method was extended to quadrupole time-of-flight mass spectrometry (Q-TOF–MS) for the structural characterisation. All degradation products were comprehensively characterised by UHPLC–ESI/MS/MS experiments. The most probable mechanisms for the formation of degradation products were also proposed. In silico toxicity of the drug and its degradation products was determined using TOPKAT toxicity prediction software.

     

Preliminary study of the stability of calix[4]arene crown compounds under radiolysis

The extraction of (135)Cs from high activity waste arising from reprocessing of spent fuel can be achieved by using calix[4]arene crown compounds. The radiolytic degradation of calix[4]arene crowns as well as their solvent, o-nitrophenyloctyl ether (NPOE), was studied using electrospray ionization mass spectrometry (ESI-MS) (that formed Cs(+) or Na(+) adducts) in nitric acid, as well as by chemical ionization tandem mass spectrometry (MS/MS) experiments. The structures of major degradation products were identified with MS and specifically labelled nitric acid. Although NPOE and calix[4]arene crowns alone are relatively stable, under simulated conditions resembling the real industrial processes involving radiolysis in the presence of nitric acid, several products resulting from nitration and oxidation were observed.     

Microwave-assisted rapid photocatalytic degradation of malachite green in TiO2 suspensions: mechanism and pathways

Microwave-assisted photocatalytic (MPC) degradation of malachite green (MG) in aqueous TiO2 suspensions was investigated. A 20 mg/L sample of MG was rapidly and completely decomposed in 3 min with the corresponding TOC removal efficiency of about 85%. To gain insight into the degradation mechanism, both GC-MS and LC-ESI-MS/MS techniques were employed to identify the major intermediates of MG degradation, including N-demethylation intermediates [(p-dimethylaminophenyl)(p-methylaminophenyl)phenylmethylium (DM-PM), (p-methylaminophenyl)(p-methylaminophenyl)phenylmethylium (MM-PM), (p-methylaminophenyl)(p-aminophenyl)phenylmethylium (M-PM)]; a decomposition compound of the conjugated structure (4-dimethylaminobenzophenone (DLBP)); products resulting from the adduct reaction of hydroxyl radical; products of benzene removal; and other open-ring intermediates such as phenol, terephthalic acid, adipic acid, benzoic acid, etc. The possible degradation mechanism of MG included five processes: the N-demethylation process, adduct products of the hydroxyl radical, the breakdown of chromophores such as destruction of the conjugated structure intermediate, removal of benzene, and an open-ring reaction. To the best of our knowledge, it is the first time the whole MG photodegradation processes have been reported.     

Direct monitoring of drug degradation by easy ambient sonic-spray ionization mass spectrometry: the case of enalapril

Using enalapril maleate as a test case, the ability of ambient mass spectrometry, namely, via easy ambient sonic‐spray ionization mass spectrometry (EASI‐MS), to perform direct monitoring of drug degradation has been tested. Two manufacturing processes were investigated (direct compression and wet granulation), and the formation of degradation products was measured via both EASI‐MS and high‐performance liquid chromatography with ultraviolet detection for a total period of 18 months. Both techniques provide comparable results, which indicate that direct analysis by ambient mass spectrometric techniques presents a viable alternative for drug degradation monitoring with superior simplicity, throughput, and reliability (no sample manipulation), and comparable quantitative results. In terms of qualitative monitoring, the full mass spectra with intact species provided by EASI‐MS allow for comprehensive monitoring of known and unknown (or unexpected) degradation products. Copyright © 2011 John Wiley & Sons, Ltd.     

11B NMR study of p-carboxybenzeneboronic acid ions for complex formation with some monosaccharides.

The 11B NMR spectra of p-carboxybenzeneboronic acid (PCBA) ions demonstrated that their chemical shifts depend on the pH. At a lower pH, PCBA exists as a mixture of neutral PCBA and the monoanion with a trigonal structure, and at higher pH as the dianion with a tetrahedral structure. In the intermediate pH region, both the mono- and dianion coexist. The pKa of the monoanion of PCBA has been estimated to be 8.53. The complex formation constants of PCBA with several monosaccharides suggest that PCBA-fructose complex is most predominant.     

LC–MS/MS method for the characterization of the forced degradation products of Entecavir

A rapid, specific, and reliable isocratic LC–MS/MS method has been developed and validated for the identification and characterization of the stressed degradation products of Entecavir (ETV). ETV, an antiviral drug, was subjected to hydrolysis (acidic, alkaline, and neutral), oxidation, photolysis and thermal stress, as per the international conference on harmonization specified conditions. The drug showed extensive degradation under oxidative and acid hydrolysis stress conditions. However, it was stable to thermal, acidic, neutral, and photolysis stress conditions. A total of five degradation products were observed and the chromatographic separation of the drug and its degradation products were achieved on a Waters Symmetry C₁₈ (250 mm × 4.6 mm, id, 5 μm) column using 20 mM ammonium acetate (pH 3)/acetonitrile (50:50, v/v) as a mobile phase. The degradation products were characterized by LC–MS/MS and its fragmentation pathways were proposed. The LC–MS method was validated with respect to specificity, linearity, accuracy, and precision. No previous reports were found in the literature regarding the degradation behavior of ETV.     

Identification and Determination of Nicorandil and its Degradation Products by HPLC and GC/MS

Nicorandil [N-(2-hydroxyethyl)-nicotinamide nitrate NIC] is a novel kind of compound in the treatment of angina pectoris. NIC can be degraded easily in storage. The degradation products include N-(2-hydroxyethy) nicotinamide (HN), nitrate ion (NI), and ni…     

Identification and characterization of stressed degradation products of metoprolol using LC/Q-TOF-ESI-MS/MS and MS(n) experiments

A rapid, specific and reliable isocratic high-performance liquid chromatography combined with quadrupole time-of-flight electrospray ionization tandem mass spectrometry (LC/Q-TOF-ESI-MS/MS) method has been developed and validated for the identification and characterization of stressed degradation products of metoprolol. Metoprolol, an anti-hypertensive drug, was subjected to hydrolysis (acidic, alkaline and neutral), oxidation, photolysis and thermal stress, as per ICH-specified conditions. The drug showed extensive degradation under oxidative and hydrolysis (acid and base) stress conditions. However, it was stable to thermal, neutral and photolysis stress conditions. A total of 14 degradation products were observed and the chromatographic separation of the drug and its degradation products was achieved on a C(18) column (4.6 × 250 mm, 5 μm). To characterize degradation products, initially the mass spectral fragmentation pathway of the drug was established with the help of MS/MS, MS(n) and accurate mass measurements. Similarly, fragmentation pattern and accurate masses of the degradation products were established by subjecting them to LC-MS/QTOF analysis. Structure elucidation of degradation products was achieved by comparing their fragmentation pattern with that of the drug. The degradation products DP(2) (m/z 153) and DP(14) (m/z 236) were matched with impurity B, listed in European Pharmacopoeia and British Pharmacopoeia, and impurity I, respectively. The LC-MS method was validated with respect to specificity, linearity, accuracy and precision.     

Determination of amitraz and its degradation products and monitoring degradation process in quince and cucumber

Amitraz is a non-systemic acaracide and insecticide. Current maximum residue limits for amitraz are stated as ‘Amitraz including the metabolites containing the 2,4-dimethylaniline moiety’. Therefore, determination of amitraz and its all degradation products are important. In this study, we develop a gas chromatography/mass spectrometry (GC/MS) method for determination of amitraz and its degradation products 2,4 dimethylaniline (DMA), 2,4 dimethylformamidine (DMF) and N-(2,4-dimethyl phenyl)-N’-methylformamidine (DMPF) in cucumber and quince. The mechanism of the degradation process was monitored at different temperatures. Amitraz and its degradation products were extracted using the QuEChERS method. To determine amitraz and its degradation products, we used GC/MS. Quantification was carried out by using selected ion monitoring, and total ion chromatogram was used to monitor additional degradation products. The method was validated by studying linearity, limit of detection (LOD) and limit of quantification (LOQ), recovery and precision. The mechanism of the degradation process was monitored at different temperatures. Degradation of amitraz mainly to three degradation products, namely DMA, DMF and DMPF, increased with temperature. Besides these three main degradation products, two other new degradation products were detected.     

Characterization of degradation products of Ivabradine by LC‐HR‐MS/MS: a typical case of exhibition of different degradation behaviour in HCl and H2SO4 acid hydrolysis

A validated stability‐indicating HPLC method was established, and comprehensive stress testing of ivabradine, a cardiotonic drug, was carried out as per ICH guidelines. Ivabradine was subjected to acidic, basic and neutral hydrolysis, oxidation, photolysis and thermal stress conditions, and the resulting degradation products were investigated by LC‐PDA and LC‐HR‐MS/MS. The drug was found to degrade in acid and base hydrolysis. An efficient and selective stability assay method was developed on Phenomenex Luna C18 (250 × 4.6 mm, 5.0 µm) column using ammonium formate (10 mM, pH 3.0) and acetonitrile as mobile phase at 30 °C in gradient elution mode. The flow rate was 0.7 ml/min and detection wavelength was 286 nm. A total of five degradation products (I‐1 to I‐5) were identified and characterized by LC‐HR‐MS/MS in combination with accurate mass measurements. The drug exhibited different degradation behaviour in HCl and H₂SO₄ hydrolysis conditions. It is a unique example where two of the five degradation products in HCl hydrolysis were absent in H₂SO₄ acid hydrolysis. The present study provides guidance to revise the stress test for the determination of inherent stability of drugs containing lactam moiety under hydrolytic conditions. Most probable mechanisms for the formation of degradation products have been proposed on the basis of a comparison of the fragmentation pattern of the drug and its degradation products. In silico toxicity revealed that the degradation products ( I‐2 to I‐5 ) were found to be severe irritants in case of ocular irritancy. The analytical assay method was validated with respect to specificity, linearity, range, precision, accuracy and robustness. Copyright © 2015 John Wiley & Sons, Ltd.     

Chromatographic methods applied in the monitoring of biodesulfurization processes - State of the art

Analytical methodologies employed in biodesulfurization processes have been reviewed; attention is primarily focused on the use of analytical techniques in the identification of degradation products and on the monitoring of degradation processes in which microbial sulphur-specific transformations take place. This is the first review of analytical techniques applied to biodesulfurization processes. Methodologies based on gas chromatography (GC) are the most frequently employed, in tandem with various detectors, mainly with the mass spectrometry (MS) detector, and the flame ionization detector (FID). High performance liquid chromatography (HPLC) coupled with ultra violet (UV) detection has also been widely employed. Different sulphurated compounds are used as model in biodesulphurization processes, naphtothiophene (NTH), benzothiophene (BTH), alkilated BTH, dibenzothiophene (DBT), alkilated DBT and their transformation products has been reviewed. DBT is the most frequently employed.     

Characterization of forced degradation products of ketorolac tromethamine using LC/ESI/Q/TOF/MS/MS and in silico toxicity prediction

Ketorolac, a nonsteroidal anti‐inflammatory drug, was subjected to forced degradation studies as per International Conference on Harmonization guidelines. A simple, rapid, precise, and accurate high‐performance liquid chromatography combined with electrospray ionization quadrupole time‐of‐flight tandem mass spectrometry (LC/ESI/Q/TOF/MS/MS) method has been developed for the identification and structural characterization of stressed degradation products of ketorolac. The drug was found to degrade in hydrolytic (acidic, basic, and neutral), photolytic (acidic, basic, and neutral solution), and thermal conditions, whereas the solid form of the drug was found to be stable under photolytic conditions. The method has shown adequate separation of ketorolac tromethamine and its degradation products on a Grace Smart C‐18 (250 mm × 4.6 mm i.d., 5 µm) column using 20 mM ammonium formate (pH = 3.2): acetonitrile as a mobile phase in gradient elution mode at a flow rate of 1.0 ml/min. A total of nine degradation products were identified and characterized by LC/ESI/MS/MS. The most probable mechanisms for the formation of degradation products have been proposed on the basis of a comparison of the fragmentation of the [M + H]⁺ ions of ketorolac and its degradation products. In silico toxicity of the drug and degradation products was investigated by using topkat and derek softwares. The method was validated in terms of specificity, linearity, accuracy, precision, and robustness as per International Conference on Harmonization guidelines. Copyright © 2014 John Wiley & Sons, Ltd.     

OH-radical induced degradation of hydroxybenzoic- and hydroxycinnamic acids and formation of aromatic products—A gamma radiolysis study

The OH-radical induced degradation of hydroxybenzoic acids (HBA), hydroxycinnamic acids (HCiA) and methoxylated derivatives, as well as of chlorogenic acid and rosmarinic acid was studied by gamma radiolysis in aerated aqueous solutions. Primary aromatic products resulting from an OH-radical attachment to the ring (hydroxylation), to the position occupied by the methoxyl group (replacement –OCH₃ by ?OH) as well as to the propenoic acid side chain of the cinnamic acids (benzaldehyde formations) were analysed by HPLC–UV and LC–ESI–MS. A comparison of the extent of these processes is given for 3,4-dihydroxybenzoic acid, vanillic acid, isovanillic acid, syringic acid, cinnamic acid, 4-hydroxycinnamic acid, caffeic acid, ferulic acid, isoferulic acid, chlorogenic acid, and rosmarinic acid. For all cinnamic acids and derivatives benzaldehydes were significant oxidation products. With the release of caffeic acid from chlorogenic acid the cleavage of a phenolic glycoside could be demonstrated. Reaction mechanisms are discussed.     

Chemistry of ascorbic acid and sulfur dioxide as an antioxidant system relevant to white wine

The impact of the combined ascorbic acid and sulfur dioxide antioxidants on white wine oxidation processes was investigated using a range of analytical techniques, including flow injection analysis for free and total sulfur dioxide and two chromatographic methods for ascorbic acid, its oxidative degradation products and phenolic compounds. The combination of different analytical techniques provided a fast and simultaneous means for the monitoring of oxidation processes in a model wine system. In addition, the initial mole ratio of sulfur dioxide to ascorbic acid was varied and the model wine complexity was increased by the inclusion of metal ions (copper(II) and iron(II)). Sulfur dioxide was found not to be a significant binder of ascorbic acid oxidative degradation products and could not prevent the formation of certain phenolic pigment precursors. The results provide a detailed insight into the ascorbic acid/sulfur dioxide antioxidant system in wine conditions.     

Characterization of process‐related impurities including forced degradation products of alogliptin benzoate and the development of the corresponding reversed‐phase high‐performance liquid chromatography method

The characterization of process‐related impurities and forced degradants of alogliptin benzoate (Alb) in bulk drugs and a stability‐indicating HPLC method for the separation and quantification of all the impurities were investigated. Alb was found to be unstable under acid and alkali stress conditions and two major degradation products (Imp‐F and Imp‐G) were observed. The optimum separation was achieved on Kromasil C₁₈ (250 × 4.6 mm, 5 μm) using 0.1% perchloric acid (pH adjusted to 3.0 with triethylamine) and acetonitrile as a mobile phase in gradient mode. The proposed method was found to be stability indicating, precise, linear (0.10–75.0 μg/mL), accurate, sensitive, and robust for the quantitation of Alb and its process‐related substances and degradation products. The structures of 11 impurities were characterized and confirmed by NMR spectroscopy, MS, and IR spectroscopy, and the most probable formation mechanisms of all impurities were proposed according to the synthesis route.     

Thermal Characterization of Materials Using Evolved Gas Analysis

Thermal analysis combined with evolved gas analysis has been used for some time. Thermogravimetry (TG) coupled with Fourier transform infrared (FTIR) spectroscopy(TG/FTIR), Thermogravimetry (TG) coupled with mass spectrometry (TG/MS), and Thermogravimetry (TG) coupled with GC/MS offers structural identification of compounds evolving during thermal processes. These evolved gas analysis (EGA) techniques allow to evaluate the chemical pathway of the degradation reaction by determining the decomposition products. In this paper the TG/FTIR, TG/MS, and Pyrolysis/GC-MS systems will be described and their applications in the study of several materials will be discussed, including the analysis of the degradation mechanisms of organically modified clays, polymers, and coal blends. This revised version was published online in July 2006 with corrections to the Cover Date.     

Stress degradation study and structure characterization of oxidation degradation product of dexlansoprazole using liquid chromatography-mass spectrometry/time of flight,liquid chromatography-tandem mass spectrometry and nuclear magnetic resonance

The present study deals with the forced degradation behavior of dexlansoprazole under International Conference on Harmonisation (ICH) prescribed stress conditions. The drug was found to be more labile under acid, base, neutral, oxidative hydrolysis and thermal stress, while it was moderately stable under photolytic conditions. The known and unknown degradation products were separated on a C-18 column using a stability-indicating method. Liquid chromatography-mass spectrometry (LC-MS) analysis was performed for all the degradation studies. Isolation and structure characterization of oxidation degradation products were executed using sophisticated tools, viz. preparative high performance liquid chromatography (HPLC), liquid chromatography-mass spectrometry/time of flight (LC-MS/TOF), liquid chromatography-tandem mass spectrometry (LC-MS/MS), and nuclear magnetic resonance (NMR). This study demonstrates an ample methodology of degradation studies and structure elucidation of unknown degradation products of dexlansoprazole, which helps in the development and stability study of active pharmaceutical ingredients and formulated products.     

液相色谱-飞行时间质谱、液相色谱-串联质谱和核磁共振用于右旋兰索拉唑的强制降解研究和氧化降解产物的结构表征(英文)

The present study deals with the forced degradation behavior of dexlansoprazole under International Conference on Harmonisation(ICH)prescribed stress conditions. The drug was found to be more labile under acid,base,neutral,oxidative hydrolysis and thermal stress,while it was moderately stable under photolytic conditions. The known and unknown degradation products were separated on a C-18 column using a stabilityindicating method. Liquid chromatography-mass spectrometry(LC-MS)analysis was performed for all the degradation studies. Isolation and structure characterization of oxidation degradation products were executed using sophisticated tools,viz. preparative high performance liquid chromatography(HPLC),liquid chromatographymass spectrometry / time of flight(LC-MS / TOF),liquid chromatography-tandem mass spectrometry(LC-MS /MS),and nuclear magnetic resonance(NMR). This study demonstrates an ample methodology of degradation studies and structure elucidation of unknown degradation products of dexlansoprazole,which helps in the development and stability study of active pharmaceutical ingredients and formulated products.     

Characterization of photodegradation products of alachlor in water by on-line solid-phase extraction liquid chromatography combined with tandem mass spectrometry and orthogonal-acceleration time-of-flight mass spectrometry

On-line solid-phase extraction liquid chromatography in combination with mass spectrometry (MS), i.e. MS/MS and orthogonal-acceleration time-of-flight MS, was used for the characterization of photodegradation products of alachlor in river water. Various MS/MS scan functions were used, in particular the precursor-ion and the daughter-ion modes, to screen for degradation products with structures closely related to that of alachlor and to obtain information on characteristic fragments of the degradation products. Elemental compositions of compounds found and some of their fragments were calculated from the accurate mass information obtained with orthogonal-acceleration time-of-flight MS. Some ten degradation products could be characterized by combining various types of mass spectral information. Since quite a number of isomers were identified, structures of the degradation products were proposed by considering the most likely fragmentation patterns in MS/MS experiments. Degradation products of alachlor found in the current study were compared with those reported in the literature.     

Identification of degradation products in loxoprofen sodium adhesive tapes by liquid chromatography-mass spectrometry and dynamic pressurized liquid extraction-solid-phase extraction coupled to liquid chromatography-nuclear magnetic resonance spectroscopy

Rapid and unambiguous identification of three degradation products (DP-1, DP-2 and DP-3) found in heat-stressed loxoprofen sodium adhesive tapes (Loxonin tapes) was achieved by LC-MS and dynamic pressurized liquid extraction (PLE)-solid-phase extraction (SPE) coupled to LC-NMR without complicated isolation or purification processes. The molecular formulae of the degradation products were determined by accurate mass measurements and product ion analyses and on-line hydrogen/deuterium (H/D) exchange experiments provided information about changes in the degradation of loxoprofen. To compensate for the low sensitivity of NMR, on-line dynamic PLE-SPE was employed and higher concentrations of degradation products trapped on the SPE column were afforded in a shorter time than they would be in such time-consuming sample preparations as pre-concentration after extraction. The loop-storage procedure was used in the LC-NMR analysis to allow the acquisition of the (1)H spectra of the three degradation products in one chromatographic run without affecting the peak separation and to avoid the carry-over of previously eluted DP-1 of high concentration by washing the NMR detection cell prior to the measurement of the DP-2 spectrum. Based on the resulting (1)H NMR spectra in combination with the MS results, DP-1 was successfully identified as an oxidation product having an oxodicarboxylic acid structure formed by the cleavage of the cyclopentanone ring of loxoprofen, DP-2 as a cyclopentanone ring-hydroxylated loxoprofen and DP-3 as a loxoprofen l-menthol ester.