动力学光度法测定痕量钒

生物无机化学已初步确认,钒是人体必需元素,因此研究和建立高灵敏度测定方法具有重要意义.催化动力学光度法测定痕量V(V)已有报道,但利用 V(V)的阻抑作用而建立测定V(V)的动力学光度法未见报道.本文研究了硫酸介质中,V(V)对溴酸钾氧化酸性品红反应的抑制作用,建立了测定痕量V(V)的新型动力学光度法.方法灵敏度高,是目前测定V(V)的最灵敏方法之一.     

第9届流动分析国际会议

19届流动(注射)分析国际会议于2003年2月18日至21日在澳大利亚Geelong市召开,由Deakin大学主办,大会报告共4个。(1)巴西Sa彲Ｐａｕｌｏ大学Ｉ.Gutz,流动分析中的电化学———远远超出检测器的范围之外;(2)联合王国Hull大学G.Green way,芯片上的实验室 收缩型流动分析;(3)美国全球流动注射分析中S.G.Marshall,区带流体学;(4)报告人未详(待考),固相反应器与液相发射器。特邀报告共7个。(1)瑞士Basel大学P.Haus er,流动分析用的电化学传感检测;(2)澳大利亚Melbourne大学S.Kolev,在气相扩散和全蒸发流动注射分析中的金属形态的分离;(…     

曲利本蓝-氨基糖苷类抗生素的显色反应及其分析应用

曲利本蓝 (TB)与硫酸卡那霉素 (KANA)和硫酸妥布霉素 (TOB)等氨基糖苷类抗生素在pH 2 .0～ 7.0的条件下反应生成蓝色离子缔合物。其最大显色波长位于 680nm(TOB)和 686nm(KANA) ,线性范围分别是 0～ 1 1 .0 μg mL(TOB)和0～ 1 3.0 μg mL(KANA) ,摩尔吸光系数 (ε)分别为 5 .32× 1 0 3(TOB)和 3.64× 1 0 3(KANA)L·mol-1·cm-1;最大褪色波长位于 5 88nm(TOB)和 5 90nm(KANA) ,线性范围均为 0～ 1 1 .0 μg mL ,摩尔吸光系数 (ε)分别为 1 .84× 1 0 4 (TOB)和 1 .1 1× 1 0 4(KANA)L·mol-1·cm-1。当用双波长叠加法时 ,ε值分别为 2 .37× 1 0 4 (TOB)和1 47× 1 0 4 (KANA)L·mol-1·cm-1。探讨了适宜的反应条件及主要的分析化学性质。该方法用于市售药物中氨基糖苷类抗生素的测定。     

沙打旺中两种新三萜化合物

沙打旺(Astragalus Adsurgens Pall)是豆科黄芪属植物,我们对其化学成分和毒性成分进行了研究,从中分出2个新的四环三萜类化合物9和10.本文报道它们的分离鉴定工作。 1 新化合物的特征 化合物9:白色粉末,m.p.249～251℃,[a]_D~(20):—47.06°(C 0.34,CHCl_3),HRMS(M~+)m/z:486.3345,结合元素分析,分子式定为C_(30)H_(46)O_5.IR(cm~(-1))示有3367～3567(—OH),1724,1740(C—O,五元环);~1H NMR(δppm,CDCl_3,TMS),1.07～1.37处有7个—CH_3,0.44(1H,d,J=4.49 Hz),0.65(1H,d,J=4.48 Hz)AB型偶合系统和IR 3050cm~(-1),提示分     

依文思蓝-氨基糖苷类抗生素的显色反应及其分析应用

在pH 2 .0～ 7.0的条件下 ,依文思蓝 (EB)与硫酸新霉素 (NEO)、硫酸卡那霉素 (KANA)、硫酸庆大霉素(GEN)和硫酸妥布霉素 (TOB)等氨基糖苷类抗生素反应生成蓝色离子缔合物 ,最大显色波长位于 672～ 676nm ;不同体系的线性范围从 0～ 9.0至 0～ 1 2 .0mg L ;摩尔吸光系数 (ε)在 1 .75× 1 0 4 ～ 3 .3 0× 1 0 4 L·mol- 1 ·cm- 1之间 ;最大褪色波长位于 61 6～ 62 0nm的区间。用褪色光度法测定时 ,线性范围从 0～ 6.0mg L至 0～ 1 4.0mg L;摩尔吸光系数 (ε)从 1 .2 2× 1 0 4 至 4.63× 1 0 4 L·mol- 1 ·cm- 1 。当用双波长叠加法时 ,ε值在 (2 .97～ 7.93 )× 1 0 4 L·mol- 1 ·cm- 1 之间。探讨了适宜的反应条件及主要的分析化学性质。该方法用于市售药物及尿液中氨基糖苷类抗生素含量的测定 ,结果满意     

流动注射分析法与多种仪器分析联用的进展

对流动注射分析法(FIA)与多种仪器分析方法,包括分光光度法、电感耦合等离子体原子发射光谱法(ICP-AES)、原子吸收光谱法(AAS)、化学发光法(CL)、荧光光度法、电化学分析法、生物传感器、毛细管电泳、免疫分析法等联用在最近两年中的新进展作了评述,引述文献42篇.     

一种刺松藻来源的硫酸阿拉伯聚糖的制备及特征结构表征

刺松藻(Codium fragile)经水提-醇沉获得粗多糖, 进一步将刺松藻粗多糖(CFP) 通过Q-Sepharose Fast Flow(QFF) 阴离子交换柱纯化得到6个多糖组分CFP1CFP6, 其中, 在CFP6中发现纯度较高的阿拉伯聚糖. 采用高效凝胶渗透色谱与十八角激光散射仪联用法和1-苯基-3-甲基-5-吡唑啉酮(PMP)柱前衍生高效液相色谱法对CFP6的分子量及单糖组成进行了分析. 结果表明, CFP6是一种分子量为79290的多糖, 由阿拉伯糖(Ara)和半乳糖(Gal)组成, 二者摩尔比为14.8:1.0. 通过多维核磁共振波谱、 液相色谱-质谱联用及二级质谱等方法对CFP6的糖苷键连接方式及其寡糖序列结构进行表征, 进一步阐明了该复杂多糖的特征结构. 经判断, CFP6主链由Ara组成, 通过 β-(1→3)糖苷键连接, 在Ara的C2位存在分支结构, 硫酸基位于Ara的C4或C2位.     

磷酸三丁酯萃取原子吸收光谱法测定微量Cr(Ⅲ)和Cr(Ⅵ)

常用的 APDC-MIBK 和 DDTC-MIBK 萃取原子吸收法一般只能测至十几个ppb 浓度的铬,且需在较高温度下进行萃取.本文报道一种用磷酸三丁酯(TBP)萃取原子吸收光谱法测定微量 Cr(Ⅲ)和 Cr(Ⅵ)的方法.实验表明,Cr_2O_7在盐酸介质中可与 TBP 形成 Cr(Ⅵ)-TBP-Cl-溶剂化合物,借此可测定0-0.25μg·ml~(-1)浓度范围内的 Cr(Ⅵ).若用 KMnO_4将平行试样中的 Cr(Ⅲ)氧化为 Cr(Ⅵ),测得总铬量,通过差减法即可算出Cr(Ⅲ)的含量.本法灵敏度高,准确度好.     

新型荧光光纤免疫磁珠流动分析系统研究(Ⅱ)

采用荧光素异硫氰酸酯 ( FITC)对新建立的荧光光纤免疫磁珠流动分析系统参数及性能进行了考察。不同泵速下测定流量的恒定性 ,其 RSD为 0 .2 3%～0 .76 % ( n=2 4 ) ;对 1× 1 0 -5～ 1× 1 0 -2 mol·L-1FITC溶液 ,线性相关系数 0 .986～ 0 .999;连续测定 1 2次 ,RSD为 0 .73%～ 0 .95% ;2 h内基线不产生飘移。     

3D－QSAR Study on Diindolylmethane and Its Analogues with Comparative Molecular Field Analysis(CoMFA)

Comparative molecular field analysis (CoMFA),a three dimensional quantitative structure-activity relationship (3D-QSAR) method was applied to a series of diindolylmethane(DIM) analogs to study the relationship between their structure and their induction of CYP 1A1-associated ethoxyresorufin-O-deethylase(EROD) activity.A DISCO model of pharmacophore was derved to guide the superposition of the compounds.The coefficient of cross-validation (q^2) and non cross-validation(r^2) for the model established by the study are 0.827 and 0.988 respectively,the value of variance ratio (F) is 103.53 and standard error estimate (SEE)is 0.044.These values indicate that the CoMFA model derived is significant and might have a good prediction for the catalytic activity of DIM compounds.As a consequence,the predicted activity values of new designed compounds were all higher than that of the reported value.     

Determination of the compositions of polysaccharides from Chinese herbs by capillary zone electrophoresis with amperometric detection

In this paper, capillary zone electrophoresis with amperometric detection (CZE-AD) was applied to determine the compositions of hetero-polysaccharides from Chinese herbs, Angelica sinensis and flax by analyzing their hydrolyzed monosaccharides: fucose, galactose, glucose, arabinose, rhamnose and xylose. Under the selected optimum conditions, the six monosaccharides could be perfectly separated within 25 min and showed significant current responses at copper electrodes. The linear ranges of the six monosaccharides were all from 5.0 x 10(-6) to 2.0 x 10(-4) mol L(-1) and their detection limits were lower or near 1.0 x 10(-6) mol L(-1) (S/N = 3). Experiments showed that the Angelica sinensis polysaccharide was composed of fucose, galactose, glucose, arabinose, rhamnose and xylose (mole ratio 1.0:13.6:15.0:8.7:21.3:3.7), and the flax polysaccharide was composed of galactose, glucose and arabinose (mole ratio 1.0:4.98:1.1). The purity of these polysaccharides leached by the introduced leaching method was 98.3 and 97.6%, respectively. Analyzing polysaccharides by this method has some merits of speed, simple instrumentation and operation, high sensitivity and high reproducibility.     

Controlled Production of Exopolysaccharides from Enterobacter A47 as a Function of Carbon Source with Demonstration of Their Film and Emulsifying Abilities

The bacterium Enterobacter A47 has demonstrated the ability to synthesise distinct exopolysaccharides (EPS) as a function of the substrate used. The culture's performance was evaluated in experiments using either glucose or xylose, as single carbon sources, and compared with the substrate (glycerol) used in previous studies. The highest EPS production (13.23 g L^?1) was obtained in the glucose fed assay, with a volumetric productivity of 3.38 g L^?1 day^?1. The use of xylose resulted in lower productivity (1.39 g L^?1 day^?1). The synthesised polymers have the same main sugar monomers (fucose, glucose, galactose and glucuronic acid), but their relative proportion varied with the substrate used. The acyl groups' content and composition were also affected by the substrate used. The polymers produced from glycerol (EPS-s) and glucose (EPS-g) had identical shear-thinning behaviour and good emulsion-stabilising capacity and their films had similar mechanical and water vapour properties. However, the emulsions stabilised with EPS-g were less stable and destabilised within short periods of time or when subjected to heat and freezing/thawing procedures. On the other hand, the polymer produced from xylose had little emulsion-stabilising capacity and lower apparent viscosity than EPS-s and EPS-g, but its films were considerably more elastic.     

A Lactulose Bienzyme Biosensor Based on Self‐Assembled Monolayer Modified Electrodes

A bienzyme biosensor in which the enzymes β‐galactosidase (β‐Gal), fructose dehydrogenase (FDH), and the mediator tetrathiafulvalene (TTF) were coimmobilized by cross‐linking with glutaraldehyde atop a 3‐mercaptopropionic acid (MPA) self‐assembled monolayer on a gold disk electrode, is reported. The working conditions selected were E_app=+0.10 V and (25±1) °C. The useful lifetime of one single TTF‐β‐Gal‐FDH‐MPA‐AuE was surprisingly long, 81 days. A linear calibration plot was obtained for lactulose over the 3.0×10^?5–1.0×10^?3 mol L^?1 concentration range, with a limit of detection of 9.6×10^?6 mol L^?1. The effect of potential interferents (lactose, glucose, galactose, sucrose, and ascorbic acid) on the biosensor response was evaluated. The behavior of the SAM‐based biosensor in flow‐injection systems in connection with amperometric detection was tested. The analytical usefulness of the biosensor was evaluated by determining lactulose in a pharmaceutical preparation containing a high lactulose concentration, and in different types of milk. Finally, the analytical characteristics of the TTF‐β‐Gal‐FDH‐MPA‐AuE are critically compared with those reported for other recent enzymatic determinations of lactulose.     

Preparation of Cobalt Oxide Nanoclusters/Overoxidized Polypyrrole Composite Film Modified Electrode and Its Application in Nonenzymatic Glucose Sensing

A cobalt oxide nanocluster/overoxidized polypyrrole composite film electrochemical sensing interface was fabricated by two step electrochemical method. The electrochemical properties and electrocatalytic activity of the resulting modified electrode were also studied carefully. The results showed that this modified electrode exhibited good stability, good anti‐interference ability, as well as high electrocatalytic activity to the oxidation of glucose. The linear range for the amperometric determination of glucose was 2.0×10^?7–2.4×10^?4 mol L^?1 and 2.4×10^?4–1.4×10^?3 mol L^?1 with a detection limit of 5.0×10^?8 mol L^?1 (S/N=3), respectively. The sensitivity was 1024 µA mM^?1 cm^?2.     

Optimized hydrolysis and analysis of Radix Asparagi polysaccharide monosaccharide composition by capillary zone electrophoresis

Using orthogonal design, optimized conditions for the hydrolysis of the polysaccharide from Radix Asparagi were determined, as well as its monosaccharide composition. Optimized hydrolysis conditions were a temperature of 100°C in 1.5 M sulfuric acid solution for 5 h. The resulting monosaccharides were derivatized with 1‐phenyl‐3‐methyl‐5‐pyrazolone, then separated by capillary zone electrophoresis in 40 mM sodium tetraborate buffer (pH 10.1), and detected by ultraviolet absorption at 245 nm. Results indicate that the polysaccharide from Radix Asparagi is composed of xylose, arabinose, glucose, rhamnose, mannose, galactose, glucuronic acid, and galacturonic acid, which differs from published findings. Moreover, xylose, glucuronic acid, and galacturonic acid have not been previously reported in Radix Asparagi polysaccharide. This method is simple, fast, and yields a highly efficient separation. As well, these findings can be applied to quality control of Radix Asparagi and for in‐depth study of the biological activity of Radix Asparagi polysaccharide.     

Construction and Performance Characterization of Ion‐Selective Electrodes for Potentiometric Determination of Paroxetine Hydrochloride in Pharmaceutical Preparations and Biological Fluids

Three types of ion‐selective electrodes: PVC membrane, modified carbon paste (CPE), and coated graphite electrodes (CGE) have been constructed for determining paroxetine hydrochloride (Prx). The electrodes are based on the ion pair of paroxetine with sodium tetraphenylborate (NaTPB) using dibutyl phthalate as plasticizing solvent. Fast, stable and potentiometric response was obtained over the concentration range of 1.1×10^?5–1×10^?2 mol L^?1 with low detection limit of 6.9×10^?6 mol L^?1 and slope of a 56.7±0.3mV decade^?1 for PVC membrane electrode, the concentration range of 2×10^?5–1×10^?2 mol L^?1 with low detection limit of 1.2×10^?5 mol L^?1 and slope of a 57.7±0.6 mV decade^?1 for CPE, and the concentration range of 2×10^?5–1×10^?2 mol L^?1 with low detection limit of 8.9×10^?6 mol L^?1 and slope of a 56.1±0.1 mV decade^?1 for CGE. The proposed electrodes display good selectivity for paroxetine with respect to a number of common inorganic and organic species. The electrodes were successfully applied to the potentiometric determination of paroxetine hydrochloride in its pure state, its pharmaceutical preparation, human urine and plasma.     

Self‐Assembled Mercapto‐Compound‐Gold‐Nanoparticle‐Modified Carbon Paste Electrode for Potentiometric Determination of Cadmium(II)

A new modified carbon paste electrode (CPE) based on a recently synthesized ligand [2‐mercapto‐5‐(3‐nitrophenyl)‐1,3,4‐thiadiazole] (MNT), self‐assembled to gold nanoparticles (GNP) as suitable carrier for Cd(II) ion with potentiometric method are described. The proposed electrode exhibits a Nernstian slope of 29.4±1.0 mV per decade for Cd(II) ion over a wide concentration range from 3.1×10^?8 to 3.1×10^?4 mol L^?1. The detection limit of electrode was 2.0×10^?8 mol L^?1 of cadmium ion. The potentiometric responses of electrode based on MNT is independent of the pH of test solution in the pH range 2.0–4.0. It has quick response with response time of about 6 s. The proposed electrode show fairly good selectivity over some alkali, alkaline earth, transition and heavy metal ions. Finally, the proposed electrode was successfully employed to detect Cd(II) ion in hair and water samples.     

Novel Membrane Potentiometric Thiocyanate Sensor Based on Tribenzyltin(IV) Dithiocarbamate

A novel PVC membrane ion‐selective electrode based on tribenzyltin(IV) dithiocarbamate [Sn(IV)–TBDTB] as neutral carrier was developed for thiocyanate (SCN^?) determination. The electrode exhibits a near‐Nernstian response for SCN^? with a slope of 62.8±2.0 mV per decade over a wide concentration range 1.0×10^?1–2.0×10^?6 mol L^?1 and a detection limit of 1.0×10^?6 mol L^?1 in MES–NaOH buffer, pH 6.0, at 25 °C. The electrode prepared with 1.5 wt.% Sn(IV)–TBDTB, 32.5 wt.% PVC and 66.0 wt.% 2‐nitrophenyloctyl ether (o‐NPOE) shows optimal response characteristics. Anti‐Hofmeister selectivity sequence for a series of anions shown by the electrode was as follows: SCN^?>Sal^?>I^?>ClO >phCOO^?>CH₃COO^?>Br^?>Cl^?>NO >NO >Citrate>SO₄^2?. The useful pH range for the electrode was found to be 3–7 with a response time 30–40 s. The electrode has been used for direct determination of thiocyanate in wastewater with satisfactory results.     

Magnetite NPs@C with Highly‐Efficient Peroxidase‐Like Catalytic Activity as an Improved Biosensing Strategy for Selective Glucose Detection

This work reports the novel application of carbon‐coated magnetite nanoparticles (mNPs@C) as catalytic nanomaterial included in a composite electrode material (mNPs@C/CPE) taking advantages of their intrinsic peroxidase‐like activity. The nanostructured electrochemical transducer reveals an enhancement of the charge transfer for redox processes involving hydrogen peroxide. Likewise, mNPs@C/CPE demonstrated to be highly selective even at elevated concentrations of ascorbic acid and uric acid, the usual interferents of blood glucose analysis. Upon these remarkable results, the composite matrix was further modified by the addition of glucose oxidase as biocatalyst, in order to obtain a biosensing strategy (GOx/mNPs@C/CPE) with enhanced properties for the electrochemical detection of glucose. GOx/mNPs@C/CPE exhibit a linear range up to 7.5×10^?3 mol L^?1 glucose, comprising the entirely physiological range and incipient pathological values. The average sensitivity obtained at ?0.100 V was (1.62±0.05)×10⁵ nA L mol^?1 (R²=0.9992), the detection limit was 2.0×10^?6 M while the quantification limit was 6.1×10^?6 mol L^?1. The nanostructured biosensor demonstrated to have an excellent performance for glucose detection in human blood serum even for pathological values.     

New extraction procedures for isolation of famotidine from aqueous samples

Liquid-liquid and solid-phase extraction procedures are proposed for famotidine isolation from aqueous samples. The isolation and spectrophotometric determination of famotidine is based on its complexation reaction with thymol blue. The composition of a complex between drug and reagent (1?:?1) was established. Dichloromethane and methanol were used as extraction solvents for LLE and SPE processes. Quantification of famotidine was done spectrophotometrically at 544?nm for dichloromethane or at 434?nm for methanolic extracts. The Beer law is obeyed in the famotidine concentration range 3?·?10^?5?mol?L^?1–2.0?·?10^?4?mol?L^?1 for LLE procedure and 2.0?·?10^?6?mol?L^?1–8.0?·?10^?5?mol?L^?1 for SPE.