Weinreb Amide,Ketone and Amine as Potential and Competitive Secondary Molecular Stations for Dibenzo-[24]Crown-8 in [2]Rotaxane Molecular Shuttles

This paper reports the synthesis and study of new pH-sensitive DB24C8-based [2]rotaxane molecular shuttles that contain within their axle four potential sites of interaction for the DB24C8: ammonium, amine, Weinreb amide, and ketone. In the protonated state, the DB24C8 lay around the best ammonium site. After either deprotonation or deprotonation-then-carbamoylation of the ammonium, different localizations of the DB24C8 were seen, depending on both the number and nature of the secondary stations and steric restriction. Unexpectedly, the results indicated that the Weinreb amide was not a proper secondary molecular station for the DB24C8. Nevertheless, through its methoxy side chain, it slowed down the shuttling of the macrocycle along the threaded axle, thereby partitioning the [2]rotaxane into two translational isomers on the NMR timescale. The ketone was successfully used as a secondary molecular station, and its weak affinity for the DB24C8 was similar to that of a secondary amine.     

A pH‐Sensitive Lasso‐Based Rotaxane Molecular Switch

The synthesis of a pH‐sensitive two‐station [1]rotaxane molecular switch by self‐entanglement of a non‐interlocked hermaphrodite molecule, containing an anilinium and triazole moieties, is reported. The anilinium was chosen as the best template for the macrocycle benzometaphenylene[25]crown‐8 (BMP25C8) and allowed the self‐entanglement of the molecule. The equilibrium between the hermaphrodite molecule and the pseudo[1]rotaxane was studied by ¹H NMR spectroscopy: the best conditions of self‐entanglement were found in the less polar solvent CD₂Cl₂ and at high dilution. The triazole moiety was then benzylated to afford a benzyltriazolium moiety, which then played a dual role. On one hand, it acts as a bulky gate to trap the BMP25C8, thus to avoid any self‐disentanglement of the molecular architecture. On another hand, it acts as a second molecular station for the macrocycle. At acidic pH, the BMP25C8 resides around the best anilinium molecular station, displaying the lasso [1]rotaxane in a loosened conformation. The deprotonation of the anilinium molecular station triggers the shuttling of the BMP25C8 around the triazolium moiety, therefore tightening the lasso.     

Energy Transfer and Concentration‐Dependent Conformational Modulation: A Porphyrin‐Containing [3]Rotaxane

A zinc porphyrin‐containing [3]rotaxane A was synthesized through a copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction. Energy donors and acceptor porphyrin were introduced to dibenzo[24]crown‐8 (DB24C8) and dibenzyl ammonium (DBA) units of [3]rotaxane A to understand the intramolecular energy transfer process. Investigations of the photophysical properties of [3]rotaxane A demonstrated that the intramolecular efficient energy transfer readily occurred from the donors on the wheels to the porphyrin center on the axis. The fluorescence of energy donors in the region of 400 to 450 nm was efficiently absorbed by the porphyrin acceptor under irradiation at 345 nm, and finally a red light emission at about 600 nm was achieved. Further investigation indicated that the conformation of [3]rotaxane A was self‐modulated by changing its concentration in CH₂Cl₂. The triazole groups on the wheel coordinated or uncoordinated to Zn²⁺ through intramolecular self‐coordination with the change in the concentration of [3]rotaxane A in CH₂Cl₂. Therefore, this conformational change was reversible in a non‐coordinating solvent such as CH₂Cl₂ but inhibited in a coordinating solvent such as THF. Such interesting behaviors were rarely observed in porphyrin derivatives. This self‐modulation feature opens up the possibility of controlling molecular conformation by varying concentration.     

Translational isomerism in a [3]catenane and a [3]rotaxane

[structure: see text] Post-assembly covalent modification using Wittig chemistry of [2]rotaxane ylides, wherein NH(2)(+) centers in the dumbbell-shaped components are recognized by dibenzo[24]crown-8 (DB24C8) rings, has afforded a [3]catenane and a [3]rotaxane with a precise and synthetically prescribed shortage of DB24C8 rings. The nondegenerate pairs of translational isomers present in both of these interlocked molecular compounds provide the fundamental platform on which to construct sensory devices and nanochemomechanical systems.     

2]Pseudorotaxanes, [2]rotaxanes and metal-organic rotaxane frameworks containing tetra-substituted dibenzo[24]crown-8 wheels

[2]Pseudorotaxanes, [2]rotaxanes and metal-organic rotaxane framework materials that utilise DB24C8 as the wheel component are well known and structural variations based on changing the axle component are common. Studies in which the DB24C8 wheel is structurally modified are much more limited. Herein, is described the synthesis of symmetrical DB24C8 analogues containing four CH(2)OR (R = CH(2)CH(2)CH(3), CH(2)(C(6)H(5)), C(6)H(5) and C(6)H(4)(4-COOEt)) substituents on the 4 and 5 positions of the aromatic rings. The effect of these molecular appendages on the stability and structures of the interpenetrated and interlocked molecules derived from these new wheels is described. The major effects are an increase in association constants for the formation of [2]pseudorotaxanes relative to DB24C8, the crystal packing of [2]rotaxanes and a change on the internal structure of a 2D MORF (R = C(6)H(5)) compared to DB24C8.     

Efficient Intramolecular Energy Transfer between Two Fluorophores in a Bis‐Branched [3]Rotaxane

A bis‐branched [3]rotaxane, with two [2]rotaxane arms separated by an oligo(para‐phenylenevinylene) (OPV) fluorophore, was designed and investigated. Each [2]rotaxane arm employed a difluoroboradiaza‐s‐indacene (BODIPY) dye‐functionalized dibenzo[24]crown‐8 macrocycle interlocked onto a dibenzylammonium in the rod part. The chemical structure of the [3]rotaxane was confirmed and characterized by ¹H and ¹³C NMR spectroscopy and high‐resolution ESI mass spectrometry. The photophysical properties of [3]rotaxane and its reference systems were investigated through UV/Vis absorption, fluorescence, and time‐resolved fluorescence spectroscopy. An efficient energy‐transfer process in [3]rotaxane occurred from the OPV donor to the BODIPY acceptor because of the large overlap between the absorption spectrum of the BODIPY moiety and the emission spectrum of the OPV fluorophore; this shows the important potential of this system for designing functional molecular systems.     

Integrative Self‐Sorting: One‐Pot Synthesis of a Hetero[4]rotaxane from a Daisy‐Chain‐Containing Hetero[4]pseudorotaxane

The structural complexity of mechanically interlocked molecules are very attractive to chemists owing to the challenges they present. In this article, novel mechanically interlocked molecules with a daisy‐chain‐containing hetero[4]rotaxane motif were efficiently synthesized. In addition, a novel integrative self‐sorting strategy is demonstrated, involving an ABB‐type (A for host, dibenzo‐24‐crown‐8 (DB24C8), and B for guest, ammonium salt sites) monomer and a macrocycle host, benzo‐21‐crown‐7 (B21C7), in which the assembled species in hydrogen‐bonding‐supported solvent only includes a novel daisy‐chain‐containing hetero[4]pseudorotaxane. The found self‐sorting process involves the integrative recognition between B21C7 macrocycles and carefully designed components simultaneously containing two types of secondary ammonium ions and a host molecule, DB24C8 crown ether. The self‐sorting strategy is integrative to undertake self‐recognition behavior to form one single species of pseudorotaxane compared with the previous report. This self‐sorting system can be used for the efficient one‐pot synthesis of a daisy‐chain‐containing hetero[4]rotaxane in a good yield. The structure of hetero[4]rotaxane was confirmed by ¹H NMR spectroscopy and high‐resolution electrospray ionization (HR‐ESI) mass spectrometry.     

Ferrocene-containing [2]- and [3]rotaxanes. Preparation via an end-capping cross-metathesis reaction and electrochemical properties

Cross-metathesis reactions of terminal olefins with acrylic esters catalyzed by a Ru-carbene complex ((H2IMes)(PCy3)Cl2Ru = CHPh, H2IMes = N,N-bis(mesityl)-4,5-dihydroimidazol-2-ylidene) were applied to the end-capping of [2]pseudorotaxanes composed of dibenzo[24]crown-8 (DB24C8) and ferrocenylmethylammonium derivatives as the macrocyclic and axle components. A [3]rotaxane consisting of two DB24C8s and an axle molecule having ferrocenyl groups at both ends was obtained from the cross-metathesis reaction of two [2]pseudorotaxanes with Fe(C5H4CH2OCOCH = CH2)2. Cyclic voltammograms of the ferrocene-containing rotaxanes show reversible redox reactions whose potentials vary depending on the presence or absence of cationic dialkylammonium groups in the vicinity of the ferrocene units.     

A pH‐Dependent,Mechanically Interlocked Switch: Organometallic [2]Rotaxane vs. Organic [3]Rotaxane

We present the first [2]rotaxane featuring a functional organometallic host. In contrast to the known organic scaffolds, this assembly shows a high post‐synthetic modifiability. The reactivity of the Ag₈ pillarplex host is fully retained, as is exemplified by the first transmetalation in a rotaxane framework to provide the respective Au₈ analogue. Additionally, a transformation under acidic conditions to give a purely organic [3]rotaxane is demonstrated which is reversible upon addition of a suitable base, rendering the assembly a pH‐dependent switch. Hereby, it is shown that the mechanically interlocked nature of the system enhances the kinetic stability of the NHC host complex by a factor of >1000 and corresponds to the first observation of a stabilizing “rotaxand effect”.     

Mild and high-yielding syntheses of diethyl phosphoramidate-stoppered [2]rotaxanes

The mild and efficient reaction between triethyl phosphite and benzylic azides allows us not only to construct rotaxanes in high yield from dibenzo[24]crown-8 (DB24C8) and dibenzylammonium (DBA(+))-derived threads but also to incorporate di(p-toluidine)[24]crown-8, which binds DBA(+) ions much more weakly than does DB24C8, into a corresponding [2]rotaxane.     

A Strategy Utilizing a Recyclable Macrocycle Transporter for the Efficient Synthesis of a Triazolium‐Based [2]Rotaxane

A general synthesis of triazolium‐containing [2]rotaxanes, which could not be accessed by other methods, is reported. It is based on a sequential strategy starting from a well‐designed macrocycle transporter which contains a template for dibenzo‐24‐crown‐8 and a N‐hydroxysuccinimide (NHS) moiety. The sequence is: 1) synthesis by slippage of a [2]rotaxane building‐block; 2) its elongation at its NHS end; 3) the delivery of the macrocycle to the elongated part of the axle by an induced translational motion; 4) the contraction process to yield the targeted [2]rotaxane and recycle the initial transporter.     

An acid-base switchable [2]rotaxane

A chemically addressable, bistable [2]rotaxane, which incorporates a dumbbell-shaped component containing both secondary dialkylammonium and 1,2-bis(pyridinium)ethane recognition sites for its ring component, dibenzo[24]crown-8 (DB24C8), has been assembled. (1)H NMR spectroscopy has demonstrated that deprotonation (and reprotonation) of the secondary dialkylammonium (dialkylamine) recognition site induces the DB24C8 ring to move away from this site to the 1,2-bis(pyridinium)ethane one (and back again) in a discrete manner, particularly when the experiment is performed in CDCl(3) solution.     

A Novel Supramolecular System: Combination of Two Switchable Processes in a [2]Rotaxane

A novel supramolecular system, which is made up of a dibenzo[24]crown‐8 (DB24C8) ring component linked with a calix[4]arene derivative, a dumbbell component, containing a secondary ammonium center (‐NR₂H₂⁺‐) and a 4,4′‐bipyridinium (BIPY²⁺) unit, and stoppered with two 3,5‐di‐tert‐butylphenyl groups on the two termini of the dumbbell component, has been synthesized. The system displays a combination of two processes: the pH‐induced shuttling of a DB24C8 ring and the complexation/decomplexation of K⁺ ions. The switching process of this supramolecular system was investigated in detail by ¹H NMR spectroscopy. The results showed that the supramolecular system can only switch smoothly in CD₃CN. The two separated switchable processes can run together smoothly in this supramolecular system.     

Controlling the Chair Conformation of a Mannopyranose in a Large‐Amplitude [2]Rotaxane Molecular Machine

Molecular machines boarding now! Molecular machines containing dibenzo[24]crown‐8 (DB24C8) and based on an anilinium and a pyridinium amide station have been prepared. The DB24C8 shuttles upon variation of pH and interacts differently with the pyridinium amide station depending on its substitution. When the DB24C8 sits around the disubstituted amide, the conformation of the pyranose changes from ¹C₄ to ⁴C₁.

     

Dynamic covalent approach to [2]- and [3]roxtanes by utilizing a reversible thiol-disulfide interchange reaction

A dynamic covalent approach to disulfide-containing [2]- and [3]rotaxanes is described. Symmetrical dumbbell-shaped compounds with two secondary ammonium centers and a central located disulfide bond were synthesized as components of rotaxanes. The rotaxanes were synthesized from the dumbbell-shaped compounds and dibenzo-[24]crown-8 (DB24C8) with catalysis by benzenethiol. The yields of isolated rotaxanes reached about 90 % under optimized conditions. A kinetic study on the reaction forming [2]rotaxane 2 a and [3]rotaxane 3 a suggested a plausible reaction mechanism comprising several steps, including 1) initiation, 2) [2]rotaxane formation, and 3) [3]rotaxane formation. The whole reaction was found to be reversible in the presence of thiols, and thermodynamic control over product distribution was thus possible by varying the temperature, solvent, initial ratio of substrates, and concentration. The steric bulk of the end-capping groups had almost no influence on rotaxane yields, but the structure of the thiol was crucial for reaction rates. Amines and phosphines were also effective as catalysts. The structural characterization of the rotaxanes included an X-ray crystallographic study on [3]rotaxane 3 a.     

Shuttling dynamics in an acid-base-switchable [2]rotaxane.

Molecular shuttles are an intriguing class of rotaxanes which constitute prototypes of mechanical molecular machines and motors. By using stopped-flow spectroscopic techniques in acetonitrile solution, we investigated the kinetics of the shuttling process of a dibenzo[24]crown-8 ether (DB24C8) macrocycle between two recognition sites or "stations"--a secondary ammonium (-NH2+-)/amine (-NH-) center and a 4,4'-bipyridinium (bipy2+) unit--located on the dumbbell component in a [2]rotaxane. The affinity for DB24C8 decreases in the order -NH2+- > bipy2+ > -NH-. Hence, shuttling of the DB24C8 macrocycle can be obtained by deprotonation and reprotonation of the ammonium station, reactions which are easily accomplished by addition of base and acid to the solution. The rate constants were measured as a function of temperature in the range 277-303 K, and activation parameters for the shuttling motion in both directions were determined. The effect of different counterions on the shuttling rates was examined. The shuttling from the -NH2+- to the bipy2+ station, induced by the deprotonation of the ammonium site, is considerably slower than the shuttling in the reverse direction, which is, in turn, activated by reprotonation of the amine site. The results show that the dynamics of the shuttling processes are related to the change in the intercomponent interactions and structural features of the two mutually interlocked molecular components. Our observations also indicate that the counterions of the cationic rotaxane constitute an important contribution to the activation barrier for shuttling.     

Active Esters as Pseudostoppers for Slippage Synthesis of [2]Pseudorotaxane Building Blocks: A Straightforward Route to Multi‐Interlocked Molecular Machines

The efficient synthesis and very easy isolation of dibenzo[24]crown‐8‐based [2]pseudorotaxane building blocks that contain an active ester motif at the extremity of the encircled molecular axle and an ammonium moiety as a template for the dibenzo[24]crown‐8 is reported. The active ester acts both as a semistopper for the [2]pseudorotaxane species and as an extensible extremity. Among the various investigated active ester moieties, those that allow for the slippage process are given particular focus because this strategy produces fewer side products. Extension of the selected N‐hydroxysuccinimide ester based pseudorotaxane building block by using either a mono‐ or a diamino compound, both containing a triazolium moiety, is also described. These provide a pH‐dependent two‐station [2]rotaxane molecular machine and a palindromic [3]rotaxane molecular machine, respectively. Molecular machinery on both interlocked compounds through variation of pH was studied and characterized by means of NMR spectroscopy.     

Synthesis of a [2]rotaxane incorporating a "magic sulfur ring" by the thiol-ene click reaction

The mild and highly efficient thiol-ene click reaction has been used to construct a rotaxane incorporating dibenzo-24-crown-8 (DB24C8) and a dibenzylammonium-derived thread in high yield under the irradiation of UV light. A rotaxane containing a disulfide linkage in the macrocycle was also synthesized by the thiol-ene click reaction. It has been demonstrated that the formation of the [2]rotaxane with the disulfide bond in the macrocycle occurs by a mechanism that is different to the threading-followed-by-stoppering process. The successful construction of a rotaxane directly from its constituent components, the macrocycle containing a disulfide linkage and the dibenzylammonium hexafluorophosphate salt, suggests that the space within the macrocycle incorporating the disulfide linkage is smaller than the phenyl unit and a plausible reaction mechanism has been proposed as follows: A small amount of the initiator forms two radicals upon the absorption of UV irradiation; the radicals act as a "key" to "unlock" the disulfide bond in the macrocycle. The resulting crown ether like moiety in the macrocycle is clipped around the ammonium ion center in the dumb-bell-shaped compound. The [2]rotaxane is generated upon recombination of the disulfide linkage.     

Host-[2]rotaxanes as cellular transport agents

Host-[2]rotaxanes, containing a diarginine-derivatized dibenzo-24-crown-8 (DB24C8) ether as the ring and a cyclophane pocket or an aromatic cleft as one blocking group, are cell transport agents. These hosts strongly associate with a variety of amino acids, dipeptides, and fluorophores in water (1 mM phosphate buffer, pH 7.0), DMSO, and a 75/25 (v/v) buffer to DMSO solution. All peptidic guests in all solvent systems have association constants (K(A)'s) in the range of 1 x 10(4) to 5 x 10(4) M(-)(1), whereas the K(A) range for the fluorophores is 1 x 10(4) to 9 x 10(5) M(-)(1). Association constants for the cyclophane itself, cyclophane 3, are smaller. These values are in the 1 x 10(3) to 5 x 10(3) M(-)(1) range, which shows that the rotaxane architecture is advantageous for guest binding. Cyclophane-[2]rotaxane 1 efficiently transports fluorescein and a fluorescein-protein kinase C (PKC) inhibitor into eukaryotic COS-7 cells, including the nucleus. Interestingly, cleft-[2]rotaxane 2 does not transport fluorescein as efficiently, even though the results from the fluorescence assays show that both [2]rotaxanes bind fluorescein with the same ability.     

Molecular shuttles by the protecting group approach

Two new [2]rotaxane-based molecular shuttles, in which a mechanically bound dibenzo[24]crown-8 (DB24C8) macroring shunts back and forth between two dialkylammonium recognition sites situated on a chemical dumbbell, have been constructed by a novel synthetic strategy that relies upon the use of the tert-butoxycarbonyl (Boc) protecting group. During the syntheses of both molecular shuttles, this protecting group masks a dialkylammonium recognition center which is liberated only after the [2]rotaxane constitution is established. In both cases, the molecular shuttles' other dialkylammonium center is essential for the rotaxane-forming reactions and it ensures that DB24C8 is interpenetrated by threadlike precursors, as a result of noncovalent bonding interactions, to produce [2]pseudorotaxanes which are stoppered subsequently through 1,3-dipolar cycloadditions between azides and bulky acetylenedicarboxylates. The new molecular shuttles have been examined by means of dynamic 1H NMR spectroscopy, which reveals that the movements of the DB24C8 macroring are very highly dependent both on solvent properties and on the nature of the spacer unit linking the two dialkylammonium centers. Thus, DB24C8 shunts facilely between the dialkylammonium centers when the shuttles are dissolved in solvents that readily donate their nonbonding electrons into noncovalent bonds, e.g., DMF, and when spacer units that do not offer much steric resistance to shuttling, e.g., hexamethylene, are used. On the other hand, shuttling is difficult in solvents that are less inclined to donate their electrons into noncovalent bonds, e.g., (CDCl2)2, and when relatively bulky benzenoid spacer units, e.g., p-xylylene, link the two dialkylammonium centers. It has been proposed that the DB24C8 might act as a "ferry" which carries a proton between dialkylammonium and dialkylamine moieties in a singly protonated [2]rotaxane by means of ion-dipole interactions.