Solvent Effects on Spectral Property and Dipole Moment of the Lowest Excited State of Coumarin 343 Dye

Steady-state absorption and fluorescence spectra, and time-resolved fluorescence spectra of coumarin 343 (C343) were measured in different solvents. The effect of the solvent on the spectral properties and dipole moment of the lowest excited state of C343 were investigated. It was found that the absorption and fluorescence spectra red-shifted slightly and strongly with increasing solvent polarity, respectively, because the charge distribution of the excited state leaded to the increasing difference between the absorption and fluorescence spectra with increasing solvent polarity. The dipole moment of the lowest excited state of C343was determined from solvatochromic measurements and the quantum chemical calculation, and the results obtained from these two methods were fully consistent. Investigations of the time-resolved fluorescence of C343 in different solvents indicated that the fluorescence lifetimes increased nearly linearly with increasing solvent polarity from 3.09 ns in toluene to 4.45 ns in water. This can be ascribed to the intermolecular hydrogen bonding interactions between C343 and hydrogen donating solvents.     

A polarizable dipole–dipole interaction model for evaluation of the interaction energies for NH···OC and CH···OC hydrogen‐bonded complexes

In this article, a polarizable dipole–dipole interaction model is established to estimate the equilibrium hydrogen bond distances and the interaction energies for hydrogen‐bonded complexes containing peptide amides and nucleic acid bases. We regard the chemical bonds N? H, C?O, and C? H as bond dipoles. The magnitude of the bond dipole moment varies according to its environment. We apply this polarizable dipole–dipole interaction model to a series of hydrogen‐bonded complexes containing the N? H···O?C and C? H···O?C hydrogen bonds, such as simple amide‐amide dimers, base‐base dimers, peptide‐base dimers, and β‐sheet models. We find that a simple two‐term function, only containing the permanent dipole–dipole interactions and the van der Waals interactions, can produce the equilibrium hydrogen bond distances compared favorably with those produced by the MP2/6‐31G(d) method, whereas the high‐quality counterpoise‐corrected (CP‐corrected) MP2/aug‐cc‐pVTZ interaction energies for the hydrogen‐bonded complexes can be well‐reproduced by a four‐term function which involves the permanent dipole–dipole interactions, the van der Waals interactions, the polarization contributions, and a corrected term. Based on the calculation results obtained from this polarizable dipole–dipole interaction model, the natures of the hydrogen bonding interactions in these hydrogen‐bonded complexes are further discussed. © 2013 Wiley Periodicals, Inc.     

Solvent effect on the intramolecular hydrogen bond in 8-quinolinol N-oxide

Solvent effect on intramolecular hydrogen bond in 8-quinolinol N-oxide has been studied by IR, UV,¹H NMR and¹³C NMR spectroscopy, dipole moment measurements and quantum-mechanical calculations. The solute-solvent interactions are of local character and they vary considerably over the range of solvent under study. The results suggest that formation complexes with solvent molecules weaken the intramolecular hydrogen bond in 8-quinolinol N-oxide.     

ASSESSMENT OF DIELECTRIC ENRICHMENT AROUND TWO FLUOROPHORES IN BINARY SOLVENTS

Abstract We investigated dielectric enrichment, or the preferential interaction between a probe and a polar solvent, using two different fluorophores in binary solvents that will not form strong hydrogen bonds with the probe. The first probe, 6-propionyl( N,N -dimethylamino)naphthalene (PRODAN), undergoes a large change in dipole moment in the excited state. We found that its emission energy varies linearly with the dielectric parameter f(D) [f(D) = 2(D - 1)/(2D + 1)] in acetone/benzene and acetonekyclohexane mixtures. The emission of the second probe, N-acetyl tryptophanamide (NATA), also varies linearly with f (D) in ethylether/acetonitrile solvents. This lack of preferential solvation was further investigated by studies of NATA in acetonitrile/methanol mixtures where hydrogen bonding is possible. We found that NATA-methanol interactions are not energetic enough to give rise to significant preferential solvation. Since preferential solvation does not occur even for weakly hydrogen bonding solvents it is thus highly unlikely that dielectric enrichment, which takes place in the absence of specific interactions, occurs with any frequency. We postulate that previous reports of dielectric enrichment were due to a lack of consideration of changes in f (D) of the solvent.     

Unusually Strong Dipole–Dipole and Dipole–Quadrupole Interactions in a Nanoporous Solid. Crystal Structure and Related Properties of (VO)3[M(CN)6]2·nH2O (M = Fe,Co)

In porous Prussian blue (PB) analogues, the partially naked central metal atoms found at the cavities surface are responsible for many of their physical properties, among them the adsorption potentials. In the as‐synthesized PB analogues, such metal sites stabilize water molecules inside the cavity through coordination bond formation. The filling of the cavity volume is completed with water molecules linked to the coordinated ones through hydrogen bonds formation. Vanadyl‐based PB analogue shows quite different features. The metal(V) at the cavities surface has saturated its coordination sphere with the O atom of the vanadyl ion (V=O). In this material, the V=O group preserves enough strong dipole moment to stabilize adsorbed species at the cavity through dipole–dipole and dipole–quadrupole interactions. This contribution reports the preparation, crystal structure and properties for (VO)₃[M(CN)₆]₂ · nH₂O (M = Fe, Co). According to the refined crystal structure, IR spectra and TG data, six water molecules remain stabilized inside the cavities through a strong dipole–dipole coupling with the vanadyl group. The cavity contains additional water molecules interacting through hydrogen bond bridges with the water molecules coupled to the V=O group. The vanadyl ion is free of hydrogen bonding interactions with the water molecules. The recorded adsorption isotherms for N₂, CO₂ and H₂, three molecules with only quadrupole moment, reveal presence of relative strong adsorption forces due to dipole‐quadrupole interactions.     

Molecular modelling and spectral investigation of some triphenyltetrazolium chloride derivatives

The molecular parameters of 2,3,5-triphenyl-2H-tetrazolium chloride (TTC) and some compounds based on triphenylformazans (TPFs) — resulting from the enzymatic transformation of TTC, were subjected to comparative investigation on the basis of semi-empirical quantum-chemical simulations, revealing some changes in dipole moment and polarisability in the TPFs in comparison with TTC. Chemical shift due to substituents was discussed using electronic absorption bands in the UV-VIS range recorded for diluted solutions in various solvents as well as the absorption spectra recorded in the infrared range for KBr dispersions. The correlation of the spectral shift of the electronic absorption bands with a specific function on the solvent refractive index, as recommended by theoretical studies focused on solute-solvent interactions, revealed the major role played by dispersive and induction forces. For several solvents, a different behaviour could be assigned to specific interactions overlapping with universal solute-solvent interactions.     

Rapid Evaluation of Individual Hydrogen Bonding Energies in Linear Water Chains

A model is proposed to rapidly evaluate the individual hydrogen bonding energies in linear water chains. We regarded the two O--H bonds of a water molecule as two dipoles. The magnitude of the O--H bond dipole mo- ment can be varied due to the other water molecules＇ presence. An analytic potential energy function, which explicitly contains the permanent dipole-dipole interactions, the polarization interactions, the van der Waals interactions and the covalent interactions, was therefore established. The individual hydrogen bonding energies in a series of linear water chains were evaluated via the analytic potential energy function and compared with those obtained from the CP-corrected MP2/aug-cc-pVTZ calculations. The results show that the analytic potential energy function not only can produce the individual hydrogen bonding energies as accurately as the CP-corrected MP2/aug-cc-pVTZ method, but is very efficient as well, demonstrating the model proposed is reasonable and useful. Based on the individual hy- drogen bonding energies obtained, the hydrogen bonding cooperativity in the linear water chains was explored and the natures of the hydrogen bonding in these water chains were discussed.     

Amide I vibrational dynamics of N-methylacetamide in polar solvents: the role of electrostatic interactions

The vibrational frequency of the amide I transition of peptides is known to be sensitive to the strength of its hydrogen bonding interactions. In an effort to account for interactions with hydrogen bonding solvents in terms of electrostatics, we study the vibrational dynamics of the amide I coordinate of N-methylacetamide in prototypical polar solvents: D2O, CDCl3, and DMSO-d6. These three solvents have varying hydrogen bonding strengths, and provide three distinct solvent environments for the amide group. The frequency-frequency correlation function, the orientational correlation function, and the vibrational relaxation rate of the amide I vibration in each solvent are retrieved by using three-pulse vibrational photon echoes, two-dimensional infrared spectroscopy, and pump-probe spectroscopy. Direct comparisons are made to molecular dynamics simulations. We find good quantitative agreement between the experimentally retrieved and simulated correlation functions over all time scales when the solute-solvent interactions are determined from the electrostatic potential between the solvent and the atomic sites of the amide group.     

The clustering reactions of Na+ and Pb+ with several important ligands

Enthalpy, Entropy, and Gibb's free energy changes for the clustering reactions of Na⁺ and Pb⁺ with several important atmospheric molecules and organic solvents have been measured by using high pressure mass spectrometry (HPMS). The unusually strong bonding has been found in Na⁺ ion complexes where ligands have large high moments and polarizabilities as well as in Pb⁺ ion complexes. The enhancement of the bonding by ion-high moment, ion-induced dipole, and dispersion interactions may account for the strong bonding in some of Na⁺ ion complex systems, while the strong bonding in Pb⁺ ion complexes may results from the hybridization of 6s and 6p orbitals of Pb⁺ ion.     

Solvent effects on infrared spectra of progesterone in CHCl3/cyclo-C6H12 binary solvent systems

The infrared spectroscopy studies of the C3 and C20 carbonyl stretching vibrations (upsilon(C=O)) of progesterone in CHCl3/cyclo-C6H12 binary solvent systems were undertaken to investigate the solute-solvent interactions. With the mole fraction of CHC13 in the binary solvent mixtures increase, three types of C3 and C20 carbonyl stretching vibration band of progesterone are observed, respectively. The assignments of upsilon(C=O) of progesterone are discussed in detail. In the CHCl3-rich binary solvent systems or pure CHCl3 solvent, two kinds of solute-solvent hydrogen bonding interactions coexist for C20 C=O. Comparisons are drawn for the solvent sensitivities of upsilon(C=O) for acetophenone and 5alpha-androstan-3,17-dione, respectively.     

A PHOTOPHYSICAL STUDY OF SOLVATOCHROMIC PROBE 6-PROPIONYL-Z(N,N-DIMETHYLAMINO)NAPHTHALENE (PRODAN) IN SOLUTION

A photophysical study of 6-propionyl-2-( N,N -dimethylamino)naphthalene (PRODAN) in room-temperature solutions under various conditions is reported. The results show no unusual photophysical properties, except for an extremely large solvatochromic shift of PRODAN fluorescence spectrum. The previously reported extra blue emission band for PRODAN in an aqueous solution is identified to be due entirely to trace water-soluble impurities in the sample. The excited-state dipole moment of PRODAN is determined based on solvatochromic results using a known twisted intramolecular charge transfer (TICT) molecule p -( N,N -diethylamino)ethylbenzoate (DEAEB) as a reference to probe specific solute-solvent interactions. The possibility of TICT state formation in PRODAN is discussed, and a solvation equilibrium mechanism is proposed to account for the photophysical behavior of PRODAN.     

Dipole moment and dielectric relaxation of poly(dimethylsilazane) oligomers

The polarity of polysilazane chains is studied using as models hexamethyldisilazane (HMDSZ) and an oligomer of amine-terminated poly(1,1-dimethylsilazane) (PDMSZ). Solvent effects and the contribution of the atomic polarization to the dipole moment of both PDMSZ and HMDSZ are discussed. A qualitative interpretation of the dipole moment of the oligomer suggests that gauche states about the skeletal bonds may be disfavored with respect to the alternative trans states. The dielectric spectrum of PDMSZ presents a glass-rubber relaxation followed by two weak secondary absorptions. The experimental results show that the relaxation strength Δε of PDMSZ is lower than that corresponding to poly(1,1-dimethylsiloxane) (PDMS). The analysis of the glass-rubber relaxation by using the coupling scheme suggests that strong intermolecular interactions occur in the chains that presumably arise from hydrogen bonding interactions between amine groups. © 1993 John Wiley & Sons, Inc.     

Spectroscopic investigation of 3-pyrazolyl 2-pyrazoline derivative in homogeneous solvents

How solvent conditions such as solvent polarity and hydrogen-bonding affect the fluorescence of a newly synthesized 3-pyrazolyl 2-pyrazoline derivative (Pyz) having pharmaceutical activity has been explored. The solvatochromic effect of Pyz is due to a change in dipole moment of the compound in the excited state. The relaxation of S1 state is perturbed in hydrogen-bonding solvents. The fluorescence properties of the systems are strongly dependent on the polarity of the media. The non-radiative relaxation process is facilitated by an increase in the polarity of the media. The photophysical response of Pyz in different solvents has been explained considering solute-solvent interactions.     

A computational study of the LiH dimer

A theoretical study of the properties of the linear LiH dimer was undertaken. In this dimer, an unusual type of hydrogen bonding (termed "inverse" hydrogen bonding by some authors), which involves the hydrogen bonded molecule acting as an electron donor (rather than as a proton donor), is exhibited. The optimized geometry, dipole moment, interaction energy, atomic charges, harmonic vibrational frequencies, and frequency shifts for the dimer are computed at the SCF, MP2, and QCISD levels of theory using mainly a 6-31++G(d,p) basis set. We also examined the relative stability of the mono-deuterated isotopomers of linear (LiH)(2), i.e., Li-H...Li-D and Li-D...Li-H. Analysis of the normal vibrational modes, changes in the partial atomic charges, and changes in the vibrational frequencies of LiH on complexation were used to gain insight into the bonding and properties of the linear LiH dimer and its isotopomers.     

Evaluation of the liquid-liquid partition coefficient of bis(acetylacetonato)copper(II): Contribution of specific solute-solvent interaction

Partition coefficients of Cu(acac)₂ were determined in eleven organic solvents-0.10M perchlorate systems. Their magnitude was compared with that of the enol form of Hacac and evaluated by a modified equation based on the regular solution theory. The partition coefficient of the copper (II) chelate has been demonstrated to strongly depend on some specific solute-solvent interactions such as direct coordination to the central metal and hydrogen bonding to the ligand molecules. In the case of chloroform, particularly the specific interaction has been elucidated by an association reaction, for which the equilibrium constant has been determined.     

Hydrophilic interactions between organic and water molecules as models for monolayers at the gas/water interface

Model clusters of surfactant prototypes with small number of water molecules are calculated at different levels of theory. All approaches used yield correct trends in the variation of the dipole moment upon tail elongation or polar headgroup variation. Models including one, two, or more water molecules are optimized. The most stable structures are those with maximum number of atoms involved in hydrogen bonding. The normal components of the dipole moment prove to be less sensitive to the nature (aliphatic or aromatic) of the hydrophobic tail, in accord with findings from the phenomenological models. Values of the dipole moment approaching the experimental estimates required inclusion of sufficient aqueous environment (>20 water molecules per hydrophilic head) and of lateral intersurfactant interactions into the model.     

Copolymerization of acrylamide and styrene. II. Reactivity ratios with unperturbed acrylamide

It was reported earlier that the copolymerization of acrylamide and styrene is strongly affected by the copolymerization medium. The effect was attributed to a change in the polarity of the ethylenic bond in the acrylamide monomer due to hydrogen bonding and/or dipole—dipole interaction, depending on the medium. In view of those findings, it was suggested that absolute values for the reactivity ratios for the copolymerization of these two monomers might be obtained only when the acrylamide monomer is unperturbed. Copolymerizations of these monomers at a number of ratios, therefore, were done in benzene, which does not undergo hydrogen bonding and has no dipole moment, at high dilution, when amide—amide interactions between acrylamide molecules should be essentially eliminated. The values of r₁ and r₂(M₁ = acrylamide) were 9.14 ± 0.27 and 0.67 ± 0.08, respectively. There appears to be some indication in this system that high dilution adversely affects the reactivity of the acrylamide monomer while enhancing that of styrene. This aspect requires more study.     

Solvatochromic study of 1,2-dihydroxyanthraquinone in neat and binary solvent mixtures

Preferential solvation of a solvatochromic probe has been studied in binary mixtures comprising of a non-protic and a protic solvent. The non-protic solvents employed are carbon tetrachloride (CCl(4)), acetonitrile (AcN) and N,N-dimethyl formamide (DMF) and the protic solvents are methanol (MeOH) and ethanol (EtOH). The probe molecule exhibits different spectroscopic characteristics depending upon the properties of the solubilizing media. The observed spectral features provide an indication of the microenvironment immediately surrounding the probe. Solvatochromic shifts of the ground and excited states of the probe were analysed by monitoring the charge transfer absorption band and the fluorescence emission spectra in terms of the solute-solvent and solvent-solvent interactions. Fluorescence emission spectra show the dual emission due to excited state proton transfer nature of the probe molecule. The effect of solvent and the excitation energy on dual emission are also studied. The observed magnitude of the Stokes shift in the above solvents has been used to deduce experimentally the dipole moment ratio of the probe molecule for the excited state to the ground state. The dipole moment of excited state is higher than the ground state.