Selenolate gold complexes with aurophilic Au(I)-Au(I) and Au(I)-Au(III) interactions

The gold(I) selenolate compound [Au(2)(SePh)(2)(mu-dppf)] (dppf = 1,1'-bis(diphenylphosphino)ferrocene) has been prepared by reaction of [Au(2)Cl(2)(mu-dppf)] with PhSeSiMe(3) in a molar ratio 1:2. This complex reacts with gold(I) or gold(III) derivatives to give polynuclear gold(I)-gold(I) or gold(I)-gold(III) complexes of the type [Au(4)(mu-SePh)(2)(PPh(3))(2)(mu-dppf)](OTf)(2), [Au(3)(C(6)F(5))(3)(mu-SePh)(2)(mu-dppf)], or [Au(4)(C(6)F(5))(6)(mu-SePh)(2)(mu-dppf)], with bridging selenolate ligands. The reaction of [Au(2)(SePh)(2)(mu-dppf)] with 1 equiv of AgOTf leads to the formation of the insoluble Ag(SePh) and the compound [Au(2)(mu-SePh)(mu-dppf)]OTf. The complexes [Au(4)(C(6)F(5))(6)(mu-SePh)(2)(mu-dppf)] and [Au(2)(mu-SePh)(mu-dppf)]OTf (two different solvates) have been characterized by X-ray diffraction studies and show the presence of weak gold(I)-gold(III) interactions in the former and intra- and intermolecular gold(I)-gold(I) inter-actions in the later.     

Synthesis, structural characterization, and theoretical studies of gold(I) and gold(I)-gold(III) thiolate complexes: quenching of gold(I) thiolate luminescence

The gold(I) thiolate complexes [Au(2-SC6H4NH2)(PPh3)] (1), [PPN][Au(2-SC6H4NH2)2] (2) (PPN = PPh3=N=PPh3), and [{Au(2-SC6H4NH2)}2(mu-dppm)] (3) (dppm = PPh2CH2PPh2) have been prepared by reaction of acetylacetonato gold(I) precursors with 2-aminobenzenethiol in the appropriate molar ratio. All products are intensely photoluminescent at 77 K. The molecular structure of the dinuclear derivative 3 displays a gold-gold intramolecular contact of 3.1346(4) A. Further reaction with the organometallic gold(III) complex [Au(C6F5)3(tht)] affords dinuclear or tetranuclear mixed gold(I)-gold(III) derivatives with a thiolate bridge, namely, [(AuPPh3){Au(C6F5)3}(mu2-2-SC6H4NH2)] (4) and [(C6F5)3Au(mu2-2-SC6H4NH2)(AudppmAu)(mu2-2-SC(6)H4NH2)Au(C6F5)3] (5). X-ray diffraction studies of the latter show a shortening of the intramolecular gold(I)-gold(I) contact [2.9353(7) or 2.9332(7) A for a second independent molecule], and short gold(I)-gold(III) distances of 3.2812(7) and 3.3822(7) A [or 3.2923(7) and 3.4052(7) A] are also displayed. Despite the gold-gold interactions, the mixed derivatives are nonemissive compounds. Therefore, the complexes were studied by DFT methods. The HOMOs and LUMOs for gold(I) derivatives 1 and 3 are mainly centered on the thiolate and phosphine (or the second thiolate for complex 2), respectively, with some gold contributions, whereas the LUMO for derivative 4 is more centered on the gold(III) fragment. TD-DFT results show a good agreement with the experimental UV-vis absorption and excitation spectra. The excitations can be assigned as a S --> Au-P charge transfer with some mixture of LLCT for derivative 1, an LLCT mixed with ILCT for derivative 2, and a S --> Au...Au-P charge transfer with LLCT and MC for derivative 3. An LMCT (thiolate --> Au(III) mixed with thiolate --> Au-P) excitation was found for derivative 4. The differing nature of the excited states [participation of the gold(III) fragment and the small contribution of sulfur] is proposed to be responsible for quenching the luminescence.     

Coordination Behavior of Sterically Protected Phosphaalkenes on the AuCl Moiety Leading to Catalytic 1,6‐Enyne Cycloisomerization

Mes*‐substituted 2,3‐dimethyl‐1,4‐diphosphabuta‐1,3‐diene, 1,2‐diphenyl‐3,4‐diphosphinidenecyclobutene, 2,2‐bis(methylsulfanyl)‐1‐phosphaethene, and 3,3‐diphenyl‐1,3‐diphosphapropenes (Mes*=2,4,6‐tri‐tert‐butylphenyl) were employed as P ligands of gold(I) complexes. The (E,E)‐2,3‐dimethyl‐1,4‐diphosphabuta‐1,3‐diene functioned as a P2 ligand for digold(I) complex formation with or without intramolecular Au–Au contact, which depends on the conformation of the 1,3‐diphosphabuta‐1,3‐diene. The 1,2‐diphenyl‐3,4‐diphosphinidenecyclobutene, which has a rigid s‐cis P?C? C?P skeleton, afforded the corresponding digold(I) complexes with a slight distortion of the planar diphosphinidenecyclobutene framework and intramolecular Au–Au contact. In the case of the 2,2‐bis(methylsulfanyl)‐1‐phosphaethene, only the phosphorus atom coordinated to gold, and the sulfur atom showed almost no intra‐ or intermolecular coordination to gold. On the other hand, the 1,3‐diphosphapropenes behaved as nonequivalent P2 ligands to afford the corresponding mono‐ and digold(I) complexes. Some phosphaalkene–gold(I) complexes showed catalytic activity for 1,6‐enyne cycloisomerization without cocatalysts such as silver hexafluoroantimonate.     

Determinants for Tight and Selective Binding of a Medicinal Dicarbene Gold(I) Complex to a Telomeric DNA G‐Quadruplex: a Joint ESI MS and XRD Investigation

The dicarbene gold(I) complex [Au(9‐methylcaffein‐8‐ylidene)₂]BF₄ is an exceptional organometallic compound of profound interest as a prospective anticancer agent. This gold(I) complex was previously reported to be highly cytotoxic toward various cancer cell lines in vitro and behaves as a selective G‐quadruplex stabilizer. Interactions of the gold complex with various telomeric DNA models have been analyzed by a combined ESI MS and X‐ray diffraction (XRD) approach. ESI MS measurements confirmed formation of stable adducts between the intact gold(I) complex and Tel 23 DNA sequence. The crystal structure of the adduct formed between [Au(9‐methylcaffein‐8‐ylidene)₂]⁺ and Tel 23 DNA G‐quadruplex was solved. Tel 23 maintains a characteristic propeller conformation while binding three gold(I) dicarbene moieties at two distinct sites. Stacking interactions appear to drive noncovalent binding of the gold(I) complex. The structural basis for tight gold(I) complex/G‐quadruplex recognition and its selectivity are described.     

Differing Coordination Modes of (O‐Alkyl)‐p‐Ethoxyphenyldithiophosphonato Ligands in Copper(I), Silver(I) and Gold(I) Triphenylphosphine Complexes

The three (O‐methyl)‐p‐ethoxyphenyldithiophosphonato triphenylphosphine complexes of copper, silver and gold, [(Ph₃P)_nM{S₂P(OMe)C₆H₄OEt‐p}] (M = Cu, n = 2; M = Ag, Au, n = 1) investigated structurally by X‐ray diffraction exhibit remarkable structural differences. The copper compound is a four‐coordinate chelate monomer with Cu–S 2.4417(6) and 2.5048(6) Å; P–Cu–S 104.24(2)–114.01(2)°; Cu–S–P 82.49(3)° and 80.85(2)°. The silver compound is a cyclic dimer with bridging dithiophosphonato ligands and three‐coordinate silver atoms [Ag–S 2.5371(5) and 2.6867(5) Å; P–Ag–S 122.88(2)° and 122.17(2)°; Ag–S–P 89.32(2)° and 103.56(2)°]. The gold compound is monomeric with linear dicoordinate gold [Au–S 2.3218(6) Å; P–Au–S 177.72(2)°, Au–S–P 100.97(3)°].     

Study of the Interaction of Some Potential Anticancer Gold(III) Complexes with Biologically Important Thiols Using NMR,UV–Vis,and Electrochemistry

The interaction of gold(III) complexes [Au(en)Cl₂]Cl, [Au(en)₂]Cl₃, [Au(cis‐DACH)Cl₂]Cl, and [Au(cis‐DACH)₂]Cl₃ (en = ethylenediamine, DACH = cis‐1,2‐diaminocyclohexane) with biologically important thiols, such as glutathione (GSH), dl ‐penicillamine (PSH), mercaptoacetic acid (MAA), and N‐(2‐mercaptopropionyl)glycine (MPG), has been studied using ¹H, ¹³C NMR, UV–vis spectroscopy and electrochemistry in aqueous solution. Kinetic data revealed that the reactivity of their substitution reaction followed the order: [Au(en)Cl₂]⁺ > [Au(en)₂]³⁺ > [Au(cis‐DACH)Cl₂]⁺ > [Au(cis‐DACH)₂]³⁺. The thiol reactivity increased with decreasing its size, viz. MAA ≫ MPG > PSH > GSH. Square wave stripping voltammetry displayed peaks for Au(III) and Au(I) at +0.875 V and +1.4 V respectively. The interaction of the complexes with thiols resulted in reduction of gold(III) to gold(I) and thiol ligands (RSH) were oxidized to disulfide (RSSR).     

Stable Anticancer Gold(III)–Porphyrin Complexes: Effects of Porphyrin Structure

In the design of physiologically stable anticancer gold(III) complexes, we have employed strongly chelating porphyrinato ligands to stabilize a gold(III) ion [Chem. Commun. 2003 , 1718; Coord. Chem. Rev. 2009 , 253, 1682]. In this work, a family of gold(III) tetraarylporphyrins with porphyrinato ligands containing different peripheral substituents on the meso‐aryl rings were prepared, and these complexes were used to study the structure–bioactivity relationship. The cytotoxic IC₅₀ values of [Au(Por)]⁺ (Por=porphyrinato ligand), which range from 0.033 to >100 μM , correlate with their lipophilicity and cellular uptake. Some of them induce apoptosis and display preferential cytotoxicity toward cancer cells than to normal noncancerous cells. A new gold(III)–porphyrin with saccharide conjugation [Au(4‐glucosyl‐TPP)]Cl ( 2 a ; H₂(4‐glucosyl‐TPP)=meso‐tetrakis(4‐β‐D ‐glucosylphenyl)porphyrin) exhibits significant cytostatic activity to cancer cells (IC₅₀=1.2–9.0 μM ) without causing cell death and is much less toxic to lung fibroblast cells (IC₅₀>100 μM ). The gold(III)–porphyrin complexes induce S‐phase cell‐cycle arrest of cancer cells as indicated by flow cytometric analysis, suggesting that the anticancer activity may be, in part, due to termination of DNA replication. The gold(III)–porphyrin complexes can bind to DNA in vitro with binding constants in the range of 4.9×10⁵ to 4.1×10⁶ dm³ mol^?1 as determined by absorption titration. Complexes 2 a and [Au(TMPyP)]Cl₅ ( 4 a ; [H₂TMPyP]⁴⁺=meso‐tetrakis(N‐methylpyridinium‐4‐yl)porphyrin) interact with DNA in a manner similar to the DNA intercalator ethidium bromide as revealed by gel mobility shift assays and viscosity measurements. Both of them also inhibited the topoisomerase I induced relaxation of supercoiled DNA. Complex 4 a , a gold(III) derivative of the known G‐quadruplex‐interactive porphyrin [H₂TMPyP]⁴⁺, can similarly inhibit the amplification of a DNA substrate containing G‐quadruplex structures in a polymerase chain reaction stop assay. In contrast to these reported complexes, complex 2 a and the parental gold(III)–porphyrin 1 a do not display a significant inhibitory effect (<10 %) on telomerase. Based on the results of protein expression analysis and computational docking experiments, the anti‐apoptotic bcl‐2 protein is a potential target for those gold(III)–porphyrin complexes with apoptosis‐inducing properties. Complex 2 a also displays prominent anti‐angiogenic properties in vitro. Taken together, the enhanced stabilization of the gold(III) ion and the ease of structural modification render porphyrins an attractive ligand system in the development of physiologically stable gold(III) complexes with anticancer and anti‐angiogenic activities.     

A Controlled Route to a Luminescent 3 d10–5 d10 Sulfido Cluster Containing Unique AuCu2(μ3‐S) Motifs

The first examples of gold(I) trimethylsilylchalcogenolate complexes were synthesized and their reactivity showcased in the preparation of a novel gold–copper–sulfur cluster [Au₄Cu₄S₄(dppm)₂] (dppm=bis(diphenylphosphino)methane). The unprecedented structural chemistry of this compound gives rise to interesting optoelectronic properties, including long‐lived orange luminescence in the solid state. Through time‐dependent density functional theory calculations, this emission is shown to originate from ligand‐to‐metal charge transfer facilitated by Au???Cu metallophilic bonding.     

Formation of multinary intermetallics from reduction of perovskites by aluminum flux: M(3)Au(6+)(x)()Al(26)Ti (M = Ca, Sr, Yb), a stuffed variant of the BaHg(11) type

New intermetallic phases were synthesized by reacting oxidic perovskites and gold metal in aluminum flux. The combination of MTiO(3) (M = Ca, Sr, Ba) and Au metal in excess molten aluminum produces quaternary compounds M(3)Au(6+)(x)()Al(26)Ti with a stuffed BaHg(11) structure type. An analogue with M = Yb was also synthesized; it shows mixed valent behavior.     

Mechanism of trivalent gold reduction and reactivity of transient divalent and monovalent gold ions studied by gamma and pulse radiolysis

The detailed kinetics of the multistep mechanism of the Au(III) ion reduction into gold clusters have been investigated by radiation chemistry methods in 2-propanol. In particular, a discussion on the steady state radiolysis dose-dependence of the yields concludes to a comproportionation reaction of nascent gold atoms Au(0) with excess Au(III) ions into Au(II) and Au(I). This reaction should be achieved through Au(III) consumption before the coalescence of atoms Au(0) into gold clusters may occur. Then gold clusters catalyze the reduction of Au(I) by 2-propanol. It was also found that a long-lived Au(II) dimer, (Au(II))(2), was transiently formed according to the quantitative analysis of time-resolved absorbance signals obtained by pulse radiolysis. Then the disproportionation of Au(II) is intramolecular in the dimer instead of intermolecular, as usually reported. The yields, reaction rate constants, time-resolved spectra, and molar extinction coefficients are reported for the successive one-electron reduction steps, involving especially the transient species, such as Au(II), (Au(II))(2), and Au(I). The processes are discussed in comparison with other solvents and other metal ions.     

Insights into the Halogen Oxidative Addition Reaction to Dinuclear Gold(I) Di(NHC) Complexes

Gold(I) dicarbene complexes [Au₂(MeIm‐Y‐ImMe)₂](PF₆)₂ (Y=CH₂ ( 1 ), (CH₂)₂ ( 2 ), (CH₂)₄ ( 4 ), MeIm=1‐methylimidazol‐2‐ylidene) react with iodine to give the mixed‐valence complex [Au(MeIm‐CH₂‐ImMe)₂AuI₂](PF₆)₂ ( 1 a^I ) and the gold(III) complexes [Au₂I₄(MeIm‐Y‐ImMe)₂](PF₆)₂ ( 2 c^I and 4 c^I ). Reaction of complexes 1 and 2 with an excess of ICl allows the isolation of the tetrachloro gold(III) complexes [Au₂Cl₄(MeIm‐CH₂‐ImMe)₂](PF₆)₂ ( 1 c^Cl ) and [Au₂Cl₄(MeIm‐(CH₂)₂‐ImMe)₂](Cl)₂ ( 2 c^Cl‐Cl ) (as main product); remarkably in the case of complex 2 , the X‐ray molecular structure of the crystals also shows the presence of I‐Au‐Cl mixed‐sphere coordination. The same type of coordination has been observed in the main product of the reaction of complexes 3 or 4 with ICl. The study of the reactivity towards the oxidative addition of halogens to a large series of dinuclear bis(dicarbene) gold(I) complexes has been extended and reviewed. The complexes react with Cl₂, Br₂ and I₂ to give the successive formation of the mixed‐valence gold(I)/gold(III) n a^X and gold(III) n c^X (excluding compound 1 c^I ) complexes. However, complex 3 affords with Cl₂ and Br₂ the gold(II) complex 3 b^X [Au₂X₂(MeIm‐(CH₂)₃‐ImMe)₂](PF₆)₂ (X=Cl, Br), which is the predominant species over compound 3 c^X even in the presence of free halogen. The observed different relative stabilities of the oxidised complexes of compounds 1 and 3 have also been confirmed by DFT calculations.     

Electrochemical synthesis of gold and protein gradients on particle surfaces

A straightforward, versatile approach to the production of protein gradients on planar and spherical particle surfaces is described. The method is based on the spatially controlled oxidation of thiolated surfaces by Au(III) ions generated via the electrochemical oxidation of a gold electrode in a phosphate-buffered saline solution (10 mM PBS, pH 7.2, 150 mM NaCl). Because the gold electrode is in direct contact with the thiolated surfaces, the released Au(III) ions, which are present as Au(III) chloride complexes, give rise to the formation of a surface gradient of Au(I)-thiolate complexes depending on the local redox potential given by the local Au(III) concentration. As is shown on the basis of the use of X-ray photoelectron spectroscopy and fluorescently labeled proteins, the Au(I)-thiolate complexes can subsequently be functionalized with thiolated proteins, yielding surface density protein gradients on micrometer-sized nonconducting polymer beads as well as linear Au(I)-thiolate gradients on planar silicon surfaces.     

Biomimetic synthesis of gold nanoparticles and their aggregates using a polypeptide sequence

The polypeptide sequence MS14 (MHGKTQATSGTIQS) was used to explore a new method for biomimetic preparation of gold nanoparticles and their aggregates. Self‐congregation of gold nanoparticles into aggregates in MS14 aqueous solution and self‐assembly of gold crystallites onto the designed complex of MS14‐PET film [protonated poly(ethylene terephthalate)] proved the specific gold‐binding characteristic of the single‐copy peptide MS14 in vitro. In aqueous solution MS14 could recover Au(III) to Au(0), tested by means of TEM, EDX and XPS. Further research suggested that the pH of the solution and the concentration of Au(III) influenced the morphology and size of the gold nanoparticles formed. In addition, extra reducing agent, sodium citrate, was introduced into the HAuCl₄–MS14 system and uniformly dispersed nanoparticles under neutral condition were obtained. Finally, we discuss the possible mechanism of this biomimetic synthesis. Copyright © 2007 John Wiley & Sons, Ltd.     

Gold Ion–Angiotensin Peptide Interaction by Mass Spectrometry

Stimulated by the interest in developing gold compounds for treating cancer, gold ion–angiotensin peptide interactions are investigated by mass spectrometry. Under the experimental conditions used, the majority of gold ion–angiotensin peptide complexes contain gold in the oxidation states I and III. Both ESI-MS and MALDI-TOF MS detect singly/multiply charged ions for mononuclear/multinuclear gold-attached peptides, which are represented as [peptide + a Au(I) + b Au(III) + (e - a -3b) H]^e+, where a,b ≥ 0 and e is charge. ESI-MS data shows singly/multiply charged ions of Au(I)-peptide and Au(III)-peptide complexes. This study reveals that MALDI-TOF MS mainly detects singly charged Au(I)-peptide complexes, presumably due to the ionization process. The electrons in the MALDI plume seem to efficiently reduce Au(III) to Au(I). MALDI also tends to enhance the higher polymeric forms of gold-peptide complexes regardless of the laser power used. Collision-induced dissociation experiments of the mononuclear and dinuclear gold-attached peptide ions for angiotensin peptides show that the gold ion (a soft acid) binding sites are in the vicinity of Cys (a soft ligand), His (a major anchor of peptide for metal ion chelation), and the basic residue Arg. Data also suggests that the abundance of gold-attached peptides increases with higher gold concentration until saturation, after which an increase in gold ion concentration leads to the aggregation and/or precipitation of gold-bound peptides.     

Dual catalysis with an Ir(III)-Au(I) heterodimetallic complex: reduction of nitroarenes by transfer hydrogenation using primary alcohols

A triazolyl-di-ylidene ligand has been used for the preparation of a homodimetallic complex of gold, and a heterodimetallic compound of gold and iridium. Both complexes have been fully characterized and their molecular structures have been determined by means of X-ray diffraction. The catalytic properties of these two complexes have been evaluated in the reduction of nitroarenes by transfer hydrogenation using primary alcohols. The two complexes afford different reaction products; whereas the Au(I)-Au(I) catalyst yields a hydroxylamine, the Ir(III)-Au(I) complex facilitates the formation of an imine.     

Effects of the Au(I)–Au(I) closed‐shell attraction on the electronic and phosphorescent properties in a series of coordination compounds: A theoretical study

The Au(I)–Au(I) closed‐shell or aurophilic attraction has been the subject of interest in the experimental and theoretical chemistry fields, due to the intriguing properties associated to it. The presence of phosphorescence in “aurophilic” compounds has been addressed to a wide range of applications, but it has not yet been fully understood. A theoretical study on the electronic and phosphorescent properties of the following series of dinuclear gold complexes has been performed: [Au₂(dmpm) (i‐mnt)] ( 1 ), [Au₂(μ‐Me‐TU) (μ‐dppm)] ( 2 ), and [Au₂(μ‐G)(μ‐dmpe)] ( 3 ). Full geometry optimizations at the second‐order Møller–Plesset perturbation theory (MP2) were carried out for each of the species. These calculations made evident that, at the ground‐state geometry, the Au(I) cations allocated at the center of the ring show a short Au–Au distance below the sum of the van der Waals radii, at the range of the aurophilic attraction. An intermolecular Au(I)–Au(I) closed‐shell attraction for a pair of the systems under study is found. This attraction is comparable to that of the hydrogen bonds. The phosphorescent properties experimentally observed for this series were also characterized through ab initio techniques. The obtained results allow to fit reasonably the excitation energies with the experimental data and to identify a correlation between the strength of the Au(I)–Au(I) interaction and the phosphorescent behavior. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

C-X（X = Cl，Br，I）键解离能作为烧结Au/AC催化剂再分散的描述因子及相关蕴意

负载型 Au基催化剂在工业过程中具有非常广泛的潜在应用,如催化加氢/脱氢过程、精细化学品合成、能源催化转化及环境保护等过程,表现出很高的催化活性和选择性. Au基催化剂活性物种或活性中心基本由纳米粒子或化合物构成,但在应用过程中因 Ostwald熟化效应或粒子迁移作用,尤其是高温高压等苛刻反应条件下,均随应用时间延长从小尺寸粒子逐渐长为大粒子,造成活性降低或完全失活,这也是负载型催化剂失活的最主要原因之一.其中因成本、稀缺等特性,负载型 Au催化剂的烧结问题是影响和制约其应用的主要因素.除可通过载体改性、助剂和官能团配位稳定等方法来延缓其失活过程外,对已烧结催化剂的高效、快捷和绿色的再分散/再生过程也具有基础和应用研究的重要意义.活性炭载 Au催化剂(Au/AC)广泛应用于乙炔氢氯化反应中,以期替代高毒性的汞基催化剂,但在反应过程中因高活性的 Au3+物种易被还原而形成 Au0物种进而烧结导致失活;如新鲜 Au/AC催化剂表面的 Au粒子尺寸为1-2 nm,经乙炔氢氯化反应后变为33 nm左右;随之在453 K、0.1 MPa、乙炔体积空速(GHSV)为600 h-1、氯化氢与乙炔摩尔比为1.1的反应条件下,乙炔转化率从81.8%降至11.2%.如何有效对大粒子 Au再分散/再生可为其应用提供有力支撑.有研究表明,气相 CH3I在甲醇羰基化反应过程中明显改变 Au/AC表面的 Au粒子尺寸;或采用浓盐酸或王水也可将烧结的 Au/AC催化剂进行再分散/再生.但已有的 Au基催化剂再分散/再生过程均伴随着强酸、强氧化或高毒性在分散剂的应用,对环境的影响及后续处理有明显的局限性,且再分散机理尚不明确.在前期工作基础上,本文采用系列卤代烃(碘代烃、溴代烃和氯代烃)对烧结的 Au/AC进行再分散/再生研究.结果表明,在室温常压条件下 CHI3可以快捷高效地对烧结 Au/AC催化剂进行再分散/再生,具有最优的再分散性能;通过对系列碘代烃 C-I键的解离能分析,发现 C-I解离能越低越有利于大粒子 Au的再分散.同时,溴代烃和氯代烃对烧结的 Au/AC催化剂也具有再分散能力,但比碘代烃的再分散效率低. C-X键的解离能与再分散效率有高相关性,即 C-X键的解离能越低越有利于 Au的再分散.总体上,三类卤代烃再分散效率高低顺序为 C-I＞C-Br＞C-Cl.进而,通过不同分散过程中 Au粒子分散状态推测了卤代烃对 Au粒子的再分散机理,即卤代烃先在 Au粒子表面化学吸附,然后 C-X键解离,形成 Au-X物种,小粒子 Au在 AC表面聚集并稳定,最后形成高分散 Au粒子(粒径<1 nm)催化剂.以乙炔氢氯化反应考察了再生 Au/AC催化剂性能,结果表明,该催化剂上乙炔转化率可达79.4%,基本恢复至初始水平,且该方法可对失活催化剂进行多次高效再生.     

Reactivity and stability of organocopper(I), silver(I), and gold(I) ate compounds and their trivalent derivatives

Organocuprate (R(2)Cu(-)) reagents react with a carbon electrophile to form a new C-C bond, yet their silver and gold counterparts seldom serve for such purposes. The origin of this striking difference is discussed with the aid of the quantum mechanical calculations using hybrid density functional method. The copper reaction takes place through two steps, the nucleophilic reaction of the ate complex R(2)Cu(I)(-) with an electrophile E(+) and the decomposition of the resulting R(2)(E)Cu(III) intermediate. These two steps were examined for Cu, Ag, and Au to find the reasons for the superiority of organocopper compounds to the silver and the gold counterparts. The first reaction is favored because of the higher-lying d-orbitals that directly participate in the nucleophilic reaction. The second reaction is faster with copper because of the intrinsic instability of the high valent copper species.     

Exthaktiv-Spekthophotometrische Bestimmung Von Rh(III) in Gegenwart Der Platinmetalle,Gold Und Silber Unter Anwendung Von 1-(2-Pyridylazo)-2-Naphthol

Abstract

A spectrophotometric method is described for the determination of 25–150μ;g of rhodium (III) using 1-(2-pyridylazo)-2-naphthol. One milligram of Ir(III) or Ir(IV), 200μ;g Ru(IV), 400μ;g Os(IV), 350μ;g Pt(IV), 5 mg Ag(I), and 100μ;g Au(III) do not interfere. Larger amounts of silver and gold are removed as AgCl and, after reduction with ascorbic acid, Au metal. A modification of the method permits the successive determination of 4–100μ;g of Hh(III) and 50–500μ;g of Pd(II) in a single sample.