气相中Cu+和Zn+与CS2反应的计算研究

以Cu⁺和Zn⁺与CS₂反应作为第一过渡金属离子与CS₂反应的范例体系. 采用密度泛函UB3LYP/6-311+G^*方法计算研究了第一过渡金属离子在基态和激发态与CS₂反应的反应机理. 全参数优化了反应势能面上各驻点的几何构型, 用频率分析方法和内禀反应坐标(IRC)方法对过渡态进行了验证. 并用UCCSD(T)/6-311G^*方法对各驻点作了单点能量校正. 在Cu⁺与CS₂反应中, 计算了单重态初始中间体¹IM1到三重态插入型中间体³IM2的反应交叉势能面. 确定了第一过渡金属离子与CS₂的反应为插入-消去反应, 找到了基态和激发态金属离子与CS₂反应的主要通道.     

气相中Cu+和Zn+与CS2反应的计算研究

以Cu⁺和Zn⁺与CS₂反应作为第一过渡金属离子与CS₂反应的范例体系. 采用密度泛函UB3LYP/6-311+G^*方法计算研究了第一过渡金属离子在基态和激发态与CS₂反应的反应机理. 全参数优化了反应势能面上各驻点的几何构型, 用频率分析方法和内禀反应坐标(IRC)方法对过渡态进行了验证. 并用UCCSD(T)/6-311G^*方法对各驻点作了单点能量校正. 在Cu⁺与CS₂反应中, 计算了单重态初始中间体¹IM1到三重态插入型中间体³IM2的反应交叉势能面. 确定了第一过渡金属离子与CS₂的反应为插入-消去反应, 找到了基态和激发态金属离子与CS₂反应的主要通道.     

YS+(1Σ+, 3Φ)与COS气相反应: YS++COS→YS2++CO的理论研究

采用密度泛函B3LYP方法研究了硫化钇离子YS⁺ (¹Σ⁺, ³Φ)与硫转移试剂COS在气相中的反应: YS⁺+COS→YS₂⁺+CO. 在单重基态和三重激发态势能面上都找到了四条反应通道. 但是除一条反应通道之外, 其他的反应机理和几何结构变化趋势在不同的势能面上有很大不同. 实验中生成YS₂⁺ 所表现出的吸热特征来自于在基态反应中的三条通道(A, B和C), 其活化势垒分别为28.3, 140.5和120.2 kJ·mol^-1. 计算结果表明硫转移反应没有双态反应活性, 因此产物YS₂⁺ 在低能量区的放热特征是由于基态反应物中还混有残留的激发态YS⁺.     

气相中Y＋, Zr＋, Nb＋与CO2反应的理论研究

以Y^＋, Zr^＋, Nb^＋与CO₂反应作为第二前过渡金属离子与CO₂反应的范例体系. 采用密度泛函UB3LYP方法, 对于Y, Zr, Nb采用Stuttgart赝势基组, 对于CO₂采用6-311＋G(2d)基组, 计算研究了三种金属离子在基态和激发态时与CO₂气相反应的机理. 结果表明三种金属离子与CO₂反应以高自旋进入反应通道, 在反应过程中发生系间窜越, 以低自旋中间体和最终产物离开反应通道. 用内禀坐标单点垂直激发计算的方法找到了势能面交叉点, 并作了相应的讨论. 因为有金属离子的参与, 使单分子CO₂的强吸热分解反应变为生成CO和MO^＋的放热过程.     

气相中Y＋, Zr＋, Nb＋与CO2反应的理论研究

以Y^＋, Zr^＋, Nb^＋与CO₂反应作为第二前过渡金属离子与CO₂反应的范例体系. 采用密度泛函UB3LYP方法, 对于Y, Zr, Nb采用Stuttgart赝势基组, 对于CO₂采用6-311＋G(2d)基组, 计算研究了三种金属离子在基态和激发态时与CO₂气相反应的机理. 结果表明三种金属离子与CO₂反应以高自旋进入反应通道, 在反应过程中发生系间窜越, 以低自旋中间体和最终产物离开反应通道. 用内禀坐标单点垂直激发计算的方法找到了势能面交叉点, 并作了相应的讨论. 因为有金属离子的参与, 使单分子CO₂的强吸热分解反应变为生成CO和MO^＋的放热过程.     

气相中CrO2+和H2反应的理论研究

用密度泛函UB3LYP/6-311++G(3df, 3pdpd)//6-311G(2dd, p)方法计算研究了在二重态和四重态两个势能面上的气相反应：CrO₂⁺ + H₂→CrO⁺+ H₂O. 对影响反应机理和反应速率的势能面交叉进行了讨论, 并运用Hammond 假设和Yoshizawa 等的内禀反应坐标(IRC)单点垂直激发计算的方法找出了势能面交叉点(crossing point (CP)). 运用碎片分子轨道(fragment molecular orbital(FMO))理论, 对初始复合物2IM1和4IM1的轨道相关进行了分析, 解释了CrO₂⁺活化H—H σ键及H₂迁移的机理.     

OH自由基的高精度量子化学研究

采用内收缩MRCI方法(Internally Contracted Multiconfiguration-Reference Configuration Interaction)研究了OH自由基, 计算得到其基态稳定构型的键长是0.09708 nm, 对应的实验值是0.096966 nm, 第一激发态的键长是0.10137 nm,实验值是0.10121 nm. 同时得到势能曲线PECs (Potential Energy Curve), 再分别由Murrell-Sorbie势能函数拟合计算和POLFIT程序计算得到OH自由基在基态X²Π和第一激发态A²Σ⁺时的光谱数据：平衡振动频率ω_e, 非谐性常数ω_eχ_e以及高阶修正ω_eY_e, 平衡转动常数B_e, 振转耦合系数α_e, 解离能D₀和垂直跃迁能量ν₀₀. 这些理论计算结果与最新的实验值非常吻合, 精确度比前人也有很大提高. 其中我们计算得到基态OH(X²Π)的解离能D₀＝35568.86 cm^－1, 第一激发态OH (A²Σ⁺)的解离能D₀＝18953.93 cm^－1, 从第一激发态A²Σ⁺ (ν＝0)到基态X²Π (v＝0)的垂直跃迁能ν₀₀＝32496.42 cm^－1.     

BH分子X 1Σ+、A 1Π和B 1Σ+ 态的势能函数

利用SAC/SAC-CI方法，使用D95++、6-311++g及cc-PVTZ等基组，对BH分子的基态(X ¹Σ⁺)、第一简并激发态(A ¹Π)及第二激发态(B ¹Σ⁺)的平衡结构和谐振频率进行了优化计算． 通过对三个基组计算结果的比较，得出了cc-PVTZ基组为三个基组中的最优基组的结论；使用cc-PVTZ基组，利用SAC的GSUM(group sum of operators)方法对基态(X ¹Σ⁺)， SAC-CI的GSUM方法对激发态(A ¹Π 和B ¹Σ⁺)进行单点能扫描计算, 用正规方程组拟合Murrell-Sorbie函数，得到了相应电子态的完整势能函数；从得到的势能函数计算了与基态(X ¹Σ⁺)、第一简并的激发态(A ¹Π)和第二激发态(X ¹Σ⁺)相对应的光谱常数(Be、αe、ωe 和ωeχe)，结果与实验数据较为一致． 其中基态、第一激发态与实验数据吻合得较好．     

气相中CrO2+活化甲烷C—H键的理论研究

用密度泛函UB3LYP/6-311＋＋G**方法计算研究了气相中CrO₂⁺ (²A₁/⁴A")活化甲烷C—H键的微观机理, 找到了四条反应通道. 对其中涉及的两态反应(TSR)进行了分析, 并对影响反应机理和反应速率的势能面交叉现象(potential energy surfaces crossing)进行了详细讨论, 进而运用Hammond假设和Yoshizawa等的内禀坐标单点垂直激发计算的方法找出了一系列势能面交叉点[crossing points (CPs)], 并作了相应的讨论. 进一步用碎片分子轨道理论[fragment molecular orbital (FMO)]对TS1中的轨道相互作用进行了分析, 解释了CrO₂⁺活化甲烷C—H键的机理.     

激发态Ti＋(3d14s2)与丙炔醇气相反应理论研究

用量子化学密度泛函(DFT)方法研究了激发态Ti^＋(3d¹4s²)与丙炔醇(PPA)气相反应的机理. 在B3LYP/DZVP水平上, 优化了反应的两个通道的反应物、中间体、过渡态和产物的几何构型, 并在MP4/[6-311＋G**(C,H,O)＋Lanl2dz (Ti)]水平上计算了各驻点的单点能量. 为了确证过渡态的真实性, 在B3LYP/DZVP水平上进行了内禀坐标(IRC)计算和频率分析, 获得了二重态反应势能面, 确定了反应机理. 研究结果表明生成产物为[C₃H₃O]^＋和Ti—H的通道是主要反应途径.     

气相中Nb＋活化CS2中的C-S键

以Nb＋与CS2反应作为第二前过渡金属离子与CS2反应生成金属硫化物离子和CS的范例体系．采用密度泛函UB3LYP方法,对于Nb＋采用Stuttgart赝势基组,对于C和S采用6—311＋G（2d）基组,计算研究了Nb＋在基态和激发态时与CS2气相反应的机理．全参数优化了反应势能面上各驻点的儿何构型,并且用频率分析方法和内禀反应坐标方法对过渡态进行了验证．结果表明Nb＋与CS2的反应是插入-消去反应,在反应过程中会发生系间窜越,并且找到了两个势能面的能量最低交叉点．     

Carbon disulfide reactions with atomic transition-metal and main-group cations: gas-phase room-temperature kinetics and periodicities in reactivity

The reactions of 46 atomic-metal cations with CS2 have been investigated at room temperature using an inductively-coupled plasma/selected-ion flow tube (ICP/SIFT) tandem mass spectrometer. Rate coefficients and products were measured for the reactions of fourth-period atomic ions from K+ to Se+, of fifth-period atomic ions from Rb+ to Te+ (excluding Tc+), and of sixth-period atomic ions from Cs+ to Bi+. Primary reaction channels were observed leading to S-atom transfer, CS2 addition and, with Hg+, electron transfer. S-atom transfer appears to be thermodynamically controlled and occurs exclusively, and with unit efficiency, in the reactions with most early transition-metal cations (Sc+, Ti+, Y+, Zr+, Nb+, La+, Hf+, Ta+, and W+) and with several main-group cations (As+, Sb+) and less efficiently with Se+, Re+ and Os+. Other ions, including most late transition and main-group metal cations, react with CS2 with measurable rates mostly through CS2 addition or not at all (K+, Rb+, Cs+). Traces of excited states (< 10%) were seen from an inspection of the observed product ions to be involved in the reactions with Mo+, Te+, Ba+ and Au+ and possibly Pt+ and Ir+. The primary products YS+, ZrS+, NbS+, HfS+, TaS+, WS+, ReS+ and OsS+ react further by S-atom transfer to form MS2(+), and TaS2(+) reacts further to form TaS3(+). CS2 addition occurs with the cations MCS2(+), MS+, MS2(+), CS2(+), and TaS3(+) to form M+(CS2)(n) (n < or = 4), MS+(CS2)(n) (n < or = 4), MS2(+)(CS2)(n) (n < or = 3), (CS2)2(+) and TaS3(+)(CS2). Up to four CS2 molecules add sequentially to bare metal cations and monosulfide cations, and three to disulfide cations. Equilibrium constant measurements are reported that provide some insight into the standard free energy change for CS2 ligation. Periodic variations in deltaG degrees are as expected from the variation in electrostatic attraction, which follows the trend in atomic-ion size and the trend in repulsion between the orbitals of the atomic cations and the occupied orbitals of CS2.     

Theoretical study of the reactions of the 1Σ+ ground state of MS+ (M = Sc,Y, and La) with oxygen‐transfer reagent MS+ + CO → ScO+ + CS in the gas phase

The reaction mechanisms of the ¹Σ⁺ ground state of MS⁺ (M = Sc, Y, and La) with oxygen‐transfer reagent MS⁺ + CO → MO⁺ + CS in the gas phase has been proposed and investigated by ab initio methods with the 6‐31G* basis set for nonmetal atoms and the effective core potentials of Lanl2dz for the metal atoms. A carbon migration from oxygen atom to sulfur atom via a four‐center transition state is involved on the reaction potential surface. The activation energies of the reactions are 34.0, 24.1, and 36.7 kcal/mol relative to their corresponding reactants and the reaction heats are 15.7, 18.6, and 18.0 kcal/mol (respectively, for M = Sc, Y, and La) at the MP4 (SDTQ)/6‐31G*//MP2/6‐31G* level plus zero‐point energy, which indicates that the cationic yttrium sulfide is more favorable for this type of reaction. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2003     

Theoretical Study on the Reaction of FeS+(6∑+,4Ф)with COS in the Gas Phase

The possible reaction mechanisms of FeST(6∑+and 4Ф states)with COS in the gas phase have been studied by using density functional theory at the B3LYP/TZVP and B3LYP/6-311+G*levels:the O/S exchange reaction(FeS++COS=FeO++CS2),O-transfer reaction(FeS++COS=FeSO++CS)and S-transfer reaction(FeS++COS=FeS2++CO).The calculation results show that the large barriers(205.7 and 310.1 kJ/mol)and the small probability of forming the preceding intermediate indicate a much lower efficiency of the O/S exchange and the O-transfer reactions and their corresponding products may not be observed experimentally.FeS2+,the product of S-transfer reaction,is predicted to be the main product.But the reactivity of the 6∑+ground state of FeS+toward COS is lower than the earlier transition metal sulfide cations MS+(M=Sc,Ti and V),although it has more reaction channels and different mechanisms.     

Reactivity and binding energies of transition metal halide ions with benzene

We have generated novel halogen-ligated transition metal ions MX(n)+ (M = Sc, Ti, V, and Fe, X = Cl, Br and I, n = 1-3). We have explored their reactions with benzene, a typical aromatic hydrocarbon. Attachment of one benzene molecule is usually rapid, whereas attachment of a second benzene molecule is generally much slower. The kinetics were analyzed to estimate binding energies, modeling the attachment reaction as a radiative association process. In all cases the Standard Hydrocarbon semiquantitative estimation approach was employed, and in some cases the more accurate variational transition state (VTST) kinetic modeling approach was also applied. Density functional (DFT) quantum calculations were also performed to give computed binding energies for some of the complexes. Taking previously determined binding energies for halogen-ligated alkaline-earth ions as benchmarks, it is concluded that binding of the first benzene molecule to the transition-metal species is strongly enhanced by specific chemical interactions, while binding of the second benzene molecule is more nearly electrostatic. The binding energies are not strongly dependent on the identity of the transition metal ion, and the metal-ion dependences can be rationalized in terms of valence-orbital occupations of the metals. The binding energies are nearly independent of the identity of the halogen ligands.     

Laser ablation and secondary ion mass spectrometry of inorganic transition-metal compounds. Part I: comparison between static ToF-SIMS and LA-FTICRMS

Most of the first-row transition-metal oxides, M(A)O(B) (M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn) were examined by static secondary ion mass spectrometry (s-SIMS) and laser ablation/ionization Fourier transform ion cyclotron resonance mass spectrometry (LA-FTICRMS). Positive and negative ions show strong correlation between the studied oxide and the detected cluster ions. Specific M(x)O(y) (+/-) species were systematically observed with both MS techniques for each investigated M(A)O(B) transition-metal oxide. Moreover, the ion composition and ion distribution are greatly dependent on the ionization technique. Laser ablation (LA)/ionization leads to larger cluster ions (ionic species with nearly hundred atoms were in particular detected for Sc2O3 and Y2O3 oxides), whereas hydrogenated, dihydrogenated, and sometimes trihydrogenated species were observed in s-SIMS. However, the ion distribution for a given M(x)O(y) (+/-) ion series (i.e. ions including the same number of metal atoms M) generally presented important similarities in both techniques.Finally, it was demonstrated that the chemical state of metal atoms in the observed ionic species is closely dependent on the metal electronic valence shell. High valence states (+III, +IV, +V, and +VI) are favored for metals with a less-than-half full valence shell configuration, whereas for other first-row transition metals (manganese, iron, cobalt, nickel, copper and zinc) lower metal valence states (0, +I or, +II) are involved.     

A comprehensive theoretical study on the reactions of Sc+ with CnH2n+2 (n=1-3): structure,mechanism, and potential-energy surface

The reactions of Sc(+)((3)D) with methane, ethane, and propane in the gas phase were studied theoretically by density functional theory. The potential energy surfaces corresponding to [Sc, C(n), H(2n+2)](+) (n=1-3) were examined in detail at the B3LYP/6-311++G(3df, 3pd)//B3LYP/6-311+G(d,p) level of theory. The performance of this theoretical method was calibrated with respect to the available thermochemical data. Calculations indicated that the reactions of Sc(+) with alkanes are multichannel processes which involve two general mechanisms: an addition-elimination mechanism, which is in good agreement with the general mechanism proposed from earlier experiments, and a concerted mechanism, which is presented for the first time in this work. The addition-elimination reactions are favorable at low energy, and the concerted reactions could be alternative pathways at high energy. In most cases, the energetic bottleneck in the addition-elimination mechanism is the initial C--C or C--H activation. The loss of CH(4) and/or C(2)H(6) from Sc(+)+C(n)H(2n+2) (n=2, 3) can proceed along both the initial C--C activation branch and the Cbond;H activation branch. The loss of H(2) from Sc(+)+C(n)H(2n+2) (n=2, 3) can proceed not only by 1,2-H(2) and/or 1,3-H(2) elimination, but also by 1,1-H(2) elimination. The reactivity of Sc(+) with alkanes is compared with those reported earlier for the reactions of the late first-row transition-metal ions with alkanes.     

气相中Y^＋活化CS2中的C—S键

以Y+与CS2反应作为第二行前过渡金属离子与CS2反应的范例体系.采用密度泛函UB3LYP方法,对于Y+采用Stuttgart赝势基组,对于CS2采用6-311+G(2d)基组,计算研究了Y+离子在基态和激发态时与CS2气相反应的机理.并用UCCSD(T)方法在相同的基组水平上对各驻点作了单点能量校正.结果表明Y+离子与CS2的反应是插入-消去反应,在反应过程中会发生系间窜越,并且找到了两个势能面的能量最低交义点.