Synthese von 1H-[1]Benzothieno[3,2—c]pyrazol-Derivaten

Derivatives of 1H-[1]Benzothieno[3,2?c]pyrazole were synthesized by a new method: 1.3-dipolar cycloaddition of substituted benzo[b]thiophene-1.1-dioxides with C-methyl-N-phenyl and C,N-diaryl-nitrilimines, resp., gave the corresponding title compounds. The structure was proved by conversion to known compounds.     

Imidazo- und Diazino-Anellierungen an das [1]Benzothieno[2,3—d]pyrimidin-System

Derivatives of the following six ring systems were synthesized:

1. 3,10-Dihydro-[1]benzothieno[2,3-d]imidazo[1,5-a]-pyrimidine (I)
2. 6H-[1]Benzothieno[2,3-d]pyrazino[1,2-a]pyrimidine (II)
3. 1,5-Dihydro-[1]benzothieno[2,3-d]imidazo[1,2-a]-pyrimidine (III)
4. 6H-[1]Benzothieno[2,3-d]pyrimido[1,2-a]pyrimidine (IV)
5. 1,5-Dihydro-imidazo[1,2-a]thieno[2,3-d]pyrimidine (V)
6. 4H-Pyrimido[1,2-a]thieno[2,3-d]pyrimidine (VI)

The first four types are new heterocyclic systems. 2-Aminomethyl-5,6,7,8-tetrahydro-[1]benzothieno[2,3-d]pyrimidin-4(3H)-one (5), which was used as intermediate for typesI andII, was synthesized by various methods. TypesIII andIV were prepared from 2-methylthio-5,6,7,8-tetrahydro-[1]-benzothieno[2,3-d]pyrimidin-4(3H)-one via the corresponding 2-benzylamino derivatives, followed by ring closure.     

One-step synthesis of [1]benzothieno[3,2-b][1]benzothiophene from o-chlorobenzaldehyde

Simple one-step synthesis of [1]benzothieno[3,2-b][1]benzothiophene (BTBT) from commercially available o-chlorobenzaldehyde is reported. The procedure is also applicable to the synthesis of dinaphtho[2,3-b:2′,3′-f]thieno[3,2-b]thiophene (DNTT).     

Alkylation of 1-hydroxy-1H-[1,2,3]triazolo[4,5-e][1,2,3,4]tetrazine 5,7-dioxide

Alkylation of 1-hydroxy-1H-[1,2,3]triazolo[4,5-e][1,2,3,4]tetrazine 5,7-dioxide 1 and its silver salt 10 with different alkylating agents (diazomethane, diazoacetone, bromoacetone, α-bromoacetophenone, methyl iodide, methyl vinyl ketone) was studied. Alkylation of compound 1 with diazo compounds and salt 10 with halocompounds results predominantly in O-alkylation products, 1-alkoxy-1H-[1,2,3]triazolo[4,5-e][1,2,3,4]tetrazine 5,7-dioxides. The Michael reaction of compound 1 with methyl vinyl ketone involves the triazole nitrogen atom to give 1-(3-oxobutyl)-1H-[1,2,3]triazolo[4,5-e][1,2,3,4]tetrazine 3,4,6-trioxide. The structures of the compounds synthesized were established by ¹H, ¹³C, ¹⁴N NMR spectroscopy and mass spectrometry.     

Synthesen von basisch substituierten ([1]Benzo-)Thieno-[2,3—d]pyrimidin-Derivaten und von ([1]Benzo-)Thieno-[2,3-d]-1,2,4-triazolo[4,3-a]pyrimidin-Derivaten

Reaction of 2-methylthio-thieno[2.3-d]pyrimidin-4(3H)-ones with heterocyclic secondary amines, ethanolamine and hydrazine, resp., gave the corresponding derivatives with a basic substituent in position 2. Cyclization of the hydrazino compounds with formic acid gave derivatives of thieno[2.3-d]-1.2.4-triazolo[4.3-a]pyrimidine and [1]benzothieno[2.3-d]-1.2.4-triazolo[4.3-a]pyrimidine, two new heterocyclic systems.     

Nitrochlorination of methyl tricyclo[4.1.0.02,7]heptane-1-carboxylate and phenyl tricyclo[4.1.0.02,7]hept-1-yl sulfone

Treatment of methyl tricyclo[4.1.0.0^2,7]heptane-1-carboxylate and phenyl tricyclo[4.1.0.0^2,7]hept-1-yl sulfone with a ～1:8 mixture of N₂O₄ and NOCl in diethyl ether at ?5 to 0°C gave products of formal anti-addition of NO₂Cl at the central C¹-C⁷ bond. In the reaction with phenyl tricyclo[4.1.0.0^2,7]hept-1-yl sulfone nitryl chloride acts as an effective chlorinating agent; as a result, a mixture of diastereoisomeric syn- and anti-6,7-dichlorobicyclo[3.1.1]hept-6-yl phenyl sulfones at a ratio of 7.5:1 is formed.     

Facile synthesis of [1]benzothieno[3,2-b]benzothiophene from o-dihalostilbenes

A convenient one-pot synthesis of [1]benzothieno[3,2-b]benzothiophene from readily available o-dihalostilbenes using combined reagents of sodium sulfide nonahydrate (Na₂S·9H₂O) or sodium hydrosulfide hydrate (NaSH·nH₂O) and sulfur is described along with plausible reaction paths in this intriguing reaction.     

Smiles rearrangement for the synthesis of 5-amino-substituted [1]benzothieno[2,3-b]pyridine

The Smiles rearrangement was successfully applied to 4-hydroxybenzo[b]thiophene furnishing a facile entry to the 4-amino derivative. The rearrangement was extended to 5-methoxy-4-methoxycarbonyl[1]benzothieno[2,3-b]pyridine obtained via aza-Wittig/electrocyclization reaction of novel N-(4-methoxybenzothiophen-2-yl)iminomethyldiphenylphosphorane with methyl trans-4-oxo-2-pentenoate. The preparation of a novel 5-amino-4-methoxycarbonyl[1]benzothieno[2,3-b]pyridine, which is of interest as a potential secondary peptide structure mimic, was successfully achieved.     

Substituted coumarin amidines: useful building blocks for the preparation of [1]benzopyrano[4,3-b]pyridin-5-one and [1]benzopyrano[4,3-d]pyrimidin-5-one derivatives

The synthesis of [1]benzopyrano[4,3-b]pyridin-5-ones 4a-f and 4g-j starting from 3-formylcoumarin and 3-cyanocoumarin N-functionalized amidines 3a-f and 3g-j, respectively, was reported. The ring-closure reaction mechanism, under basic or acidic media, was proposed. Furthermore, the reaction of 3-formylamidines 3a,c-f with ammonium acetate gave good yields of 2-substituted [1]benzopyrano[4,3-d]pyrimidin-5-ones 7.     

Reactions of tetrahydropyrido[4,5-d][1,2,4]triazolo[1,5-a]-pyrimidin-4-ones with activated alkynes. Synthesis of [1,2,4]triazolo[1′,5′:1,2]pyrimido[4,5-d]azocines

Triazolo[1′,5′:1,2]pyrimido[4,5-d]azocines were synthesized by the tandem expansion of the tetrahydropyridine ring in tetrahydropyridotriazolopyrimidines by the action of activated alkynes. Under these conditions, triazolopyridopyrimidines benzylated at the nitrogen atom of the pyrimidine moiety undergo the Hofmann cleavage of the tetrahydropyridine ring to form 5-vinyltriazolo[1,5-a]pyrimidines.     

Das erste [1]Titanocenophan mit Phosphor-Brücke

PhPCp ₂ could be prepared by the reaction ofPhPCl₂ withCpNa. The metallation ofPhPCp ₂ withn-BuLi and the following reaction with TiCl₄ led to the first P-bridged [1]titanocenophane. Structural assignments of this compound could be made on the base of its₁H-NMR spectrum.     

Reaction products of methyl tricyclo[4.1.0.02,7]heptane-1-carboxylate and tricyclo[4.1.0.02,7]hept-1-yl phenyl sulfone with dinitrogen tetraoxide

The reaction of methyl tricyclo[4.1.0.0^2,7]hepatne-1-carboxylate with dinitrogen tetraoxide in diethyl ether at ?10 to 0°C, followed by treatment of the reaction mixture with methanol, gave approximately equal amounts of methyl exo,syn-6,7-dinitro-and exo-6-hydroxy-syn-7-nitrobicyclo[3.1.1]heptane-endo-6-carboxylates. Tricyclo[4.1.0.0^2,7]hept-1-yl phenyl sulfone reacted with dinitrogen tetraoxide under analogous conditions to produce a mixture of diastereoisomeric exo,syn-and endo,syn-6,7-dinitro-6-phenylsulfonylbicyclo-[3.1.1]heptanes and 6,6-dimethoxy-endo-7-nitrobicyclo[3.1.1]heptane at a ratio of 4.5:2:1. Probable factors responsible for the different stereoselectivities in the addition of N₂O₄ at the central C¹-C⁷ bond of the initial tricycloheptane compounds were discussed. The structural parameters of the dinitro ester and related dinitro sulfone were compared on the basis of the X-ray diffraction data.     

Design and synthesis of self-included pillar[5]arene-based bis-[1]rotaxanes

Two strategies for the design of new pillar[5]arene-based mechanically self-interlocked molecules (MSMs) are reported here. The first strategy is based on the construction of an intermediate pseudo[1]rotaxane followed by the desired bis-[1]rotaxane. The other one is based on the construction of the desired bis-[1]-rotaxane directly via a condensation reaction through host-guest interactions between a mono-functionalized pillar[5]arene and the axle. This compound has interesting self-assembly properties in methanol and some extended applications of this compound will be reported in the near future.     

Heterocycles [h]-fused onto 4-oxoquinoline-3-carboxylic acid, Part VI [1]. Synthesis and X-ray structure of model indolo[3,2-b]- and [2,3-b]pyrido[2,3-f]quinoxaline-3-carboxylic esters

Cyclocondensation reaction of ethyl 7,8-diamino-1-cyclopropyl-6-fluoro-4-oxo-1,4-dihydroquinoline-3-carboxylate with 1-methylisatin produced a separable mixture of the corresponding indolo[3,2-b]- and [2,3-b]pyrido[2,3-f]quinoxaline-3-carboxylates, of which the latter isomer predominates. On the other hand, interaction with 1H-isatin or 5-chloroisatin gave the respective indolo[2,3-b]pyrido[2,3-f]quinoxaline-3-carboxylates as the sole regiospecific products. The structures of these new pentacyclic derivatives are based on microanalytical, spectral (IR, MS, and NMR) and X-ray crystal structure data.     

1-aza-1,3-enynes in synthesis of substituted 4H-[1,3]thiazino[3,2-a]benzimidazol-4-ols

Reaction of N-tert-butyl-1-aza-1,3-enynes with symmetrically substituted 2-mercaptobenzimidazoles in water-alcohol solutions afford 4H-[1,3]thiazino[3,2-a]benzimidazol-4-ols. The structure of compounds obtained was proved by the ¹H and ¹³C NMR spectroscopy and X-ray diffraction data.     

New synthetic approach to [1]benzopyrano[4,3-b]pyridin-5-one derivatives

A new synthesis of [1]benzopyrano[4,3-b]pyridin-5-ones 4 was developed starting from 3-formyl-coumarin N-functionalized amidines 3. The reaction is based likely on the intramolecular cyclocondensation of the C-α amidinic carbanion in basic medium on the formyl group.     

Synthesis and characterization of benzo[c]thiophene analogs incorporating benzo[b]thiophene/1-hexylindole/benzo[b]furan

Synthesis of 1,3-disubstituted benzo[c]thiophene analogs incorporating heterocycles such as benzo[b]thiophene/1-hexylindole/benzo[b]furan and thiophene units is described. Optical and electrochemical studies of the benzo[c]thiophene analogs are also reported.     

Angular distributions of photoelectrons in resonantly enhanced multiphoto ionization via the 7s[1 1/2]0 1 and 8s[1 1/2]0 1 states of Xe

Photoelectron angular distributions have been measured for the three-photon resonant one-photon ionization, (3+1), of Xe via the 7s[1 1/2]⁰ ₁ and 8s[1 1/2]⁰ ₁ states. The results are in good agreement with the theoretical predictions of Tang and Lambropoulos [13] for the 8s[1 1/2]⁰ ₁, but not for the 7s[1 1/2]⁰ ₁ state. Furthermore, the results are compared to those which have been obtained by Blazewicz et al. [1] for the three-photon resonant two-photon ionization, (3+2), of Xe via the 6s[1 1/2]⁰ ₁ state.     

DFT study on [4+2] and [2+2] cycloadditions to [60] fullerene

The functionalisation of C₆₀ fullerene with 2,3-dimethylene-1,4-dioxane (I) and 2,5-dioxabicyclo [4.2.0]octa-1(8),6-diene (II) was investigated by the use of density functional theory calculations in terms of its energetic, structural, field emission, and electronic properties. The functionalisation of C₆₀ with I was previously reported experimentally. The I and II molecules are preferentially attached to a C—C bond shared and located between two hexagons of C₆₀ via [4+2] and [2+2] cycloadditions bearing reaction energies of ?15.9 kcal mol^?1 and ?72.4 kcal mol^?1, respectively. The HOMO-LUMO energy gap and work function of C₆₀ are significantly reduced following completion of the reactions. The field electron emission current of the C₆₀ surface will increase after functionalisation of either the I or II molecule.     

Synthesis and crystal structures of the dioxovanadium complexes [VO2L1] and [VO2L2]2

Two new oxovanadium complexes, [VO₂L¹] (I) and [VO₂L²]₂ (II), where L¹ and L² are the deprotonated forms of 4-bromo-2-[(2-diethylaminoethylimino)methyl]phenol (HL¹) and 4-bromo-2-{[2-(2-hydroxyethylamino)ethylimino]methyl}phenol (HL²), respectively, have been synthesized and characterized by IR spectra and single crystal X-ray diffraction. The crystal of I is monoclinic: space group P2₁/n, a = 14.300(3), b = 7.010(2), c = 15.460(2) ?, ?? = 107.401(2)°, V = 1478.7(5) ?³, Z = 4. The crystal of II is monoclinic: space group P2₁/c, a = 7.270(2), b = 15.373(3), c = 11.893(3) ?, ?? = 99.302(2)°, V = 1311.8(5) ?³, Z = 2. Complex I is a mononuclear dioxovanadium(IV) complex. Complex II is a centrosymmetric dinuclear dioxovanadium(V) complex with a V...V distance of 3.117(2) ?. The Vatom in I is in a distorted square-pyramidal coordination, and that in II is in an octahedral coordination. The difference in the structures of the complexes is largely induced by the hydrogen bonds during the self-assembly process.