The first synthesis of dihydro-3H-pyrido[2,3-b][1,4]diazepinols and a new alternative approach for diazepinone analogues

The first synthesis of a series of 2-aryl(heteroaryl)-4-trifluoromethyl-4,5-dihydro-3H-pyrido[2,3-b][1,4]diazepin-4-ols, where aryl = C₆H₅, 4-FC₆H₄, 4-ClC₆H₄, 4-BrC₆H₄, 4-CH₃C₆H₄, 4-OCH₃C₆H₄, 4,4′-biphenyl, 1-naphthyl and heteroaryl = 2-thienyl, 2-furyl obtained from the direct cyclocondensation reaction of 4-methoxy-1,1,1-trifluoroalk-3-en-2-ones with 2,3-diaminopyridine in 54-71% yield, is reported. Another alternative and efficient route for the synthesis of a series of 2-aryl(heteroaryl)-3H-pyrido[2,3-b][1,4]diazepin-4(5H)-ones from the reaction 4-methoxy-1,1,1-trichloroalk-3-en-2-ones with 2,3-diaminopyridine, in 54-70% yield, is also reported.     

Efficient synthesis of 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl (X: NMe2; OMe) by homocoupling of 1-bromo-3,5-di(p-X-phenylethynyl)benzene or by heterocoupling of 3,3′,5,5′-tetraethynylbiphenyl with p-X-phenylbromobenzene with nickel or palladium complexes, respectively

The conjugated 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl derivatives were efficiently obtained by homocoupling of 1-bromo-3,5-di(p-X-phenylethynyl)benzene mediated by zero-valent nickel complexes.The 1-bromo-3,5-di(p-X-phenylethynyl)benzene was previously prepared by heterocoupling between 1-bromo-3,5-di(ethynyl)benzene and p-X-iodobenzene (X: NMe₂; OMe) catalysed by the palladium/copper system in good yield. The necessary 1-bromo-3,5-di(ethynyl)benzene was obtained by heterocoupling between 1,3,5-tribromobenzene and 2-methyl-3-butyn-2-ol catalysed by palladium and successive treatment with sodium hydroxide in dry toluene, in good yield.The same 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl (X: NMe₂; OMe) derivatives were alternatively synthesised in highest yield by heterocoupling between 3,3′,5,5′-tetra(ethynyl)biphenyl and p-X-bromobenzene (X: NMe₂; OMe) catalysed by palladium in excellent yields. Previously, 3,3′,5,5′-tetra(ethynyl)biphenyl was obtained in practically quantitative yield by homocoupling of 1-bromo-3,5-di[4-(2-methyl-3-butyn-2-ol)] benzene mediated by the zero-valent nickel complex to the 3,3′,5,5′-tetra{di[4-(2-methyl-3-butyn-2-ol)]}biphenyl followed the treatment with sodium hydroxide.     

Synthesis, structure and complexation of the fluorinated 1,3-enaminoketones containing at the nitrogen atom substituents with a terminal C≡C bond

The reaction of fluorinated lithium 1,3-diketonates with propargylamine hydrochloride and 1,1,1-trifluorpentane-2,4-dione or 1,1,1-trifluoro-4-methoxypent-3-en-2-one with propargylamine and 3-aminophenylacetylene were performed to obtain fluorinated 1,3-enaminones containing at a nitrogen atom substituents with terminal C≡C bonds: (Z)-1,1,1-trifluoro-4-(2-propynylamino)-3-pentene-2-one, (Z)-1,1,2,2-tetrafluoro-5-(2-propynylamino)-4-hexen-3-one, and 4-(3-ethynylphenylamino)-1,1,1-trifluoropentyl-3-en-2-one. Reactions of 4-(3-ethynyl-phenylamino)-1,1,1-trifluoro-pentyl-3-en-2-one with Cu(II) acetate or nanosized powder of copper or its oxides led to the respective chelate complex. The structure of (Z)-1,1,2,2-tetrafluoro-5-(2-propynylamino)-4-hexen-3-one and a copper complex of 4-(3-etinilphenylamino)-1,1,1-trifluoropenta-3-en-2-one was determined by XRD.     

Synthesis and hydrogenation of (E)-γ-aryl-γ-morpholino-α-trifluoromethylated allyl alcohols through the reaction of trifluoroacetaldehyde ethyl hemiacetal with enamines

Treatment of trifluoroacetaldehyde ethyl hemiacetal with enamines, derived from acetophenone derivatives, at room temperature gave (E)-1,1,1-trifluoro-4-morpholino-4-aryl-but-3-en-2-ols, which are intermediates for preparation of the β-trifluoromethylated aldol products, 4,4,4-trifluoro-3-hydroxy-1-aryl-butan-1-ones. The structure of the intermediate (E)-1,1,1-trifluoro-4-morpholino-4-(4-nitrophenyl)-but-3-en-2-ols could be assigned by ¹H, ¹³C NMR, IR, and X-ray crystallography. Furthermore, hydrogenation and reductive deamination of the intermediate (E)-1,1,1-trifluoro-4-morpholino-4-aryl-but-3-en-2-ols with hydrogen in the presence of a catalytic amount (10 mol %) of palladium on carbon in trifluoroethanol proceeded smoothly at room temperature to give 1,1,1-trifluoro-4-aryl-2-butanols in good to excellent yields.     

Novel four-component route to the synthesis of spiro[indoline-3,4′-pyridine]-3′-carboxylate derivatives

An effective route to spiro[indoline-3,4′-pyridine]-3′-carboxylate derivatives is described. This involves reaction of isatin, 1-phenyl-2-(1,1,1-triphenyl-λ⁵-phosphanylidene)-1-ethanone, and benzylamine derivatives or aliphatic amines in the presence of alkyl acetoacetate (1,3-dicarbonyl compounds) in dry methanol under reflux conditions. The reactive 1:1 enaminone, which is obtained from the addition of the amine to 1,3-dicarbonyl compound, adds to the α,β-unsaturated ketone, which is formed from the reaction of isatin and 1-phenyl-2-(1,1,1-triphenyl-λ⁵-phosphanylidene)-1-ethanone, to produce the alkyl 1′-benzyl-2′-methyl-2-oxo-6′-phenyl-1′H-spiro[indoline-3,4′-pyridine]-3′-carboxylate derivatives in excellent yields.     

Novel synthesis of 3-(3,3,3-trifluoroprop-1-en-2-yl)furans via stereoselective processing and palladium-catalyzed cycloisomerization

The 3,3,3-trifluoroprop-1-en-2-yl-substituted furans (4) were synthesized via palladium-catalyzed cyclization-isomerization of 1,1,1-trifluoro-2-[(tert-butyldimethylsilyloxy)methyl]-3-alkynylbut-2-en-1-ols (3), which were readily obtained from 1,1,1-trifluoro-2-[(tert-butyldimethylsilyloxy)methyl]-3,3-dibromoprop-2-ene (1) in three steps.     

The unexpected cyclization routes of N,N′-bis(oxotrifluoroalkenyl)-1,3-phenylenediamines in polyphosphoric acid medium

The unexpected results of the cyclization reactions of N,N′-bis(oxotrifluoroalkenyl)-1,3-phenylenediamines [1,3-C₆H₄-(NHCRCHC(O)CF₃)₂], where R = H, Me, and Ph, in a strongly acidic medium (PPA), allowing the synthesis of new trifluoromethylated heterocycles containing the 1,7-phenanthroline nucleus in 32-40% yields and 7-aminoquinolines (38-40% yields), is reported. The bis-enaminoketone intermediates were easily isolated from the reactions of 4-alkoxy-4-alkyl(aryl)-1,1,1-trifluoroalk-3-en-2-ones with 1,3-phenylenediamine in ethanol under mild conditions (68-86% yields).     

Synthesis of chiral β-3-amino-2-hydroxyalkanoates and 3-alkyl-3-hydroxy-β-lactams by double asymmetric induction

Reactions of chiral (2S)-enolates of dioxolan-4-ones, derived from lactic, mandelic, and phenyllactic acids, with aliphatic (S_S)- and (S_R)-tert-butylsulfinyl aldimines afforded conformationally restrained C2-disubstituted N,O-orthogonally protected 3-amino-2-hydroxyalkanoates in the form of N-sulfinyl protected 1′-aminodioxolan-4-ones. The product distribution showed that there is significant kinetic selectivity, due to the presence of ‘matched’ and ‘mismatched’ components, between the (S)- or (R)-tert-butylsulfinyl aldimines and the (2S)-enolates of the 1,3-dioxolan-4-ones. Selective methoxide-induced removal of the acetal group of the N-sulfinyl-1′-aminodioxolanones yielded the corresponding N-sulfinyl protected methyl alkanoates. In addition, the selective acid-induced removal of the sulfinyl group of the N-sulfinyl-1′-aminodioxolanones provided the corresponding N-unprotected 1′-aminodioxolanones, whose base-induced cyclization afforded the corresponding β-lactams.     

Facile and catalytic degradation method of DDT using Pd/C-Et3N system under ambient pressure and temperature

The catalytic degradation method of p,p′-DDT [1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane] and its regioisomer o,p′-DDT [1,1,1-trichloro-2-(o-chlorophenyl)-2-(p-chlorophenyl)ethane] using the Pd/C-Et₃N system under ambient hydrogen pressure and temperature was established. The presence of Et₃N was necessary for the quick and complete breakdown of DDT. The independent degradation study of two intermediates, p,p′-DDD [2,2-bis(p-chlorophenyl)-1,1-dichloroethane] and p,p′-DDE [2,2-bis(p-chlorophenyl)-1,1-dichloroethylene] using GC-MS let us to speculate the degradation pathway of p,p′-DDT. In the initial phase of the reaction, p,p′-DDT degradation splits into two ways: a dehydrochlorination pathway and a hydrodechlorination pathway. In each pathway, reaction starts from an aliphatic moiety and subsequent hydrodechlorination from the benzene moieties takes place in a stepwise manner. The former pathway leads to the formation of 1,1-diphenylethane and the latter leads to the formation of 1,1-dichloro-2,2-diphenylethane. These diphenylethane analogs, which are less toxic compared with p,p′-DDT, are terminal degradation products in our system. The distinctive features of our catalytic degradation method of DDTs are reliability, simplicity, efficiency, and inexpensiveness.     

The highly regiospecific synthesis and crystal structure determination of 1,1′-2,5′ substituted ring-locked ferrocenes

1,1′-Ferrocene biscarboxaldehyde (1) has been prepared and the aldehyde groups were subsequently protected with acetal groups to produce 1,1′-bisacetalferrocene (2). A ring-locked ferrocene was synthesised by further derivatisation of the cyclopentadiene rings at the 2,2′ positions with phosphine substituents to produce 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene (3), which was subsequently coordinated to either a nickel chloride (5) or nickel bromide (6) metal centre. The ring-locked ferrocene complexes produced 2,5′-bis-(acetal)-1,1′-diphenylphosphinoferrocene substitution patterns. The acetal protecting groups of 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene were removed to produce 1,1′-bis-carboxaldehyde-2,2′-diphenylphosphinoferrocene (4). The Cp rings of 1,1′-bisacetalferrocene were also further derivatised at the 2,2′ positions with a silane to produce the ring-locked 1,1′-siloxane-2,5′-bisacetalferrocenophane (7). The acetal protecting groups were removed from this to produce 1,1′-siloxane-2,5′-ferrocenophanecarboxaldehyde (8). For both the phosphine and siloxane electrophiles, the substitution on the Cp rings gives chiral products (obtained as racemic mixtures). Due to the highly regioselective nature of the reaction and diastereoselectivity in the products only C₂-symmetric compounds were observed without the presence of meso diastereoisomers. Subsequent ring-locking forced the Cp rings to rotate, leading to 1,1′-ring-locked ferrocenes with 2,5′-arrangement of the acetal groups (i.e. on opposite faces of the ferrocene unit).     

Synthesis of trifluoromethyl-substituted salicylates by cyclocondensation of 1,3-bis(silyloxy)-1,3-butadienes with 4,4-dimethylthio-1,1,1-trifluorobut-3-en-2-one

A formal [3+3] cyclocondensation of 1,3-bis(silyl enol ethers) with the little-known 4,4-dimethylthio-1,1,1-trifluorobut-3-en-2-one was studied. In contrast to 4,4-dimethoxy-1,1,1-trifluorobut-3-en-2-one, this α-oxoketene dithioacetal reacts with 1,3-bis(trimethylsilyloxy)-1,3-butadienes in the presence of TiCl₄ to give mainly 6-methylthio-4-(trifluoromethyl)salicylates via 1,2-addition. The scope and limitations of the reaction are discussed.     

Synthesis and structure of 5,5′-[(E,E)-2,5-diiodohexa-1,5-diene-1,6-diyl]bis(2,3-dichloro-4,4-dimethoxycyclopent-2-en-1-one)

Treatment of 2,3,5-trichloro-5-[(E)-2,3-diiodoprop-1-en-1-yl]-4,4-dimethoxycyclopent-2-en-1-one with SmI₂ in THF gives 5,5′-[(1E,5E)-2,5-diiodohexa-1,5-diene-1,6-diyl]bis(2,3-dichloro-4,4-dimethoxycyclopent-2-en-1-one) and its meso form at a ratio of 3:1.     

Unusual transformations of lithium enolate of ethyl 4,4,4-trifluoro-3-oxobutanoate

The present paper describes unusual reactions of lithium enolate of ethyl 4,4,4-trifluoro-3-oxobutanoate with ammonium acetate and 1-aminonaphthalene. These reactions produce 4-amino-2,6-bis(trifluoromethyl)pyridine and 4-trifluoromethyl-2-[(Z)-1,1,1-trifluoroprop-1-en-2-ol-1-yl]benzo[h]quinoline, respectively. The reaction of 1,1,7,7,7-hexafluoroheptane-2,4,6-trione hydrate with 1-naphthylamine gives a mixture of 4-trifluoromethyl-2-[(Z)-1,1,1-trifluoroprop-1-en-2-ol-1-yl]benzo[h]quinoline and N,N??-bis(naphth-1-yl)-2,6-bis(trifluoromethyl)pyridine-4(1H)-imine, respectively.     

Synthesis and liquid crystal properties of a novel family of oligothiophene derivatives

In order to develop novel oligothiophene-based liquid crystals capable of hydrogen bonding, new terthiophene derivatives containing an alkylamide group, N,N′-dialkyl-5,5″-dichloro-2,2′:5′,2″-terthiophene-4,4″-dicarboxamide (DNC_nDCl3T, n=8, 18), N,N′-dialkyl-5,5″-dibromo-2,2′:5′,2″-terthiophene-4,4″-dicarboxamide (DNC_nDBr3T, n=5, 8, 16, 18), or N,N′-dialkyl-5,5″-diiodo-2,2′:5′,2″-terthiophene-4,4″-dica-rboxamide (DNC_nDI3T, n=8, 18), were designed and synthesized, and their thermal behaviour was examined. It was found that DNC₁₈DCl3T, DNC₁₈DI3T and DNC_nDBr3T (n=8, 16, 18) form a smectic A phase and that the alkyl chain length greatly affects liquid crystal phase formation. The absence of liquid crystallinity in the corresponding ester derivatives suggests that intermolecular hydrogen bonding also plays a role in the formation of a liquid crystal phases in the DNC_nDBr3T system.     

Investigation of reaction of dimedone and ethyl acetoacetate with 1,2-epoxy-3-chloropropane

Reactions of dimedone and ethyl acetoacetate with 1,2-epoxy-3-chloropropane in the presence of K₂CO₃ in DMSO medium were investigated. The reaction of 1,2-epoxy-3-chloropropane with ethyl acetoacetate afforded ethyl 5-hydroxy-2-methyl-5,6-dihydro-4H-pyran-3-carboxylate, with dimedone, 3-(1′,2′-epoxypropyloxy)-5,5-dimethyl-cyclohex-2-en-1-one.     

Synthesis of substituted 1-trifluoromethyl and 1-perfluoroalkyl-3-(arylamino)prop-2-en-1-one: advances in the mechanism of Combes 2-trifluoromethyl and 2-perfluoroalkyl quinolines synthesis

We report a new synthesis and our study of the mechanism of formation of substituted 1-trifluoromethyl and 1-perfluoroalkyl-3-(phenylamino)prop-2-en-1-one starting from 3-(R-phenoxy)-3-perfluoroalkyl-prop-2-enals and arylamines. Reactivity study of the intermediates confirmed that 3-perfluoroalkyl-N,N′-diphenyl-1,5-diazapentadienes are the synthetic intermediates of the synthesis of 2-perfluoroalkylquinolines. The mechanism of the reaction of 1-trifluoromethyl and 1-perfluoroalkyl-3-(phenylamino)prop-2-en-1-one with POCl₃ was studied. To our knowledge this is the first detection and isolation of N,N′-diaryldiazapentadiene derivatives as intermediates in the Combes F-alkyl substituted quinoline synthesis starting from enaminoketones. Finally, we succeeded isolating and identifying unsymmetrically substituted 2-perfluorolakyldiazapentadiene.     

Synthesis of 3-sulfanylpropanols containing three consecutive stereocenters via tandem Michael-aldol reaction of enoylthioamides with acetals as key reaction

(2S,3S,1′R)-2-(α-Methoxybenzyl)-3-phenyl-3-sulfanylpropionamides were diastereoselectively prepared by the reactions of N-cinnamoyl-4S-isopropyl-5,5-dimethyloxazolidinethione with acetals in the presence of SnCl₄. The absolute configuration of the three newly created contiguous stereocenters was determined by the X-ray analysis of the disulfide. The amides were transformed into propanols by the reductive removal of the oxazolidinone moiety.     

Probing of PSE acetal protection for nucleoside chemistry

The use of phenylsulfonylethylidene (PSE) acetal as a new 3′,5′-bridged protecting group in nucleoside chemistry is reported. The PSE acetal demonstrates to be compatible with Lewis acids used in standard glycosylation reactions. In addition, a selective 2′-O-deacylation from a 3′,5′-O-(phenylsulfonyl)-2′-O-acetyl nucleoside can be achieved, giving access to subsequent chemical modifications in 2′ position. However, the PSE acetal cleavage surprisingly appeared to be purine/pyrimidine base dependent.     

Thin-Layer Chromatography of Some Monothio-β-Diketonate Complexes of Nickel,Zinc and Cobalt

Abstract

A silica gel adsorbent has been successfully used to separate three series of nickel, zinc and cobalt complexes of 1,1-difluoro-4-mercapto-4-(2′-thienyl)but-3-en-2-one, 1,1,1-trifluoro-4-mercapto-4-(2′-thienyl)but-3-en-2-one, 1,1,1-trifluoro-4-mercapto-2-(2′-naphthyl)but-3-en-2-one. For comparative purposes R_F data for the protonated ligands are also included. The ZnL₂ complexes gave R_F values in single and binary solvent systems which were similiar to the R_F values of the ligands; whereas, the NiL₂ and CoL₃ complexes gave R_F values which paralled each other in most solvents.     

The first application of 4-alkoxy-1,1,1-trifluoroalk-3-en-2-ones in a three-component condensation protocol for the synthesis of 3-acyl-4-aryl-2-(trifluoromethyl)-2-hydroxy-3,4,7,8-tetrahydro-2H-chromen-5(6H)-ones

The one-pot, simple and efficient three-component condensation protocol for the preparation of a series of twenty-five new 3-acyl-4-aryl-2-(trifluoromethyl)-2-hydroxy-3,4,7,8-tetrahydro-2H-chromen-5(6H)-ones, where aryl = Ph, 4-tolyl, 4-ClPh, 4-NO₂Ph and 4-CHOPh, and acyl = Ac, Bz, 4-FBz, furan-2-oyl, thien-2-oyl and naphth-1-oyl, employing 1,3-cyclohexanedione, five aryl aldehydes and for the first time, six 4-alkyl(aryl/heteroaryl)-4-methoxy-1,1,1-trifluoroalk-3-en-2-ones, is described. Yields in 15-75% were obtained when the MCRs were performed in the presence of a catalytic amount of triethylamine (25 mol%) and in ethanol as solvent under reflux for 16 h. A representative X-ray diffraction data for 3-acetyl-4-phenyl-2-(trifluoromethyl)-2-hydroxy-3,4,7,8-tetrahydro-2H-chromen-5(6H)-one is also showed.