Oxidative entry to α-oxy N-acyl aminals and hemiaminals: efficient formation of 2-(N-acylaminal) substituted tetrahydropyrans

An efficient new method to synthesize α-oxy N-acyl aminals and hemiaminals in a single step from readily synthesized N-acyl enamines has been developed using PhI(OAc)₂ as the oxidant. The reaction conditions are very mild and the products are obtained in good yields (65-92%). A possible mechanistic pathway is laid out.     

Stereoselective synthesis of trans-α-ketohydrazones from silyl enol ethers mediated by iodobenzene diacetate

Stereoselective synthesis of a variety of trans-α-ketohydrazones from silyl enol ethers in the presence of iodobenzene diacetate [PhI(OAc)₂] as oxidant with N-aminophthalimide (PthNH₂) as the nitrogen source in CH₂Cl₂ at room temperature was accomplished in good yields (up to 75%) with exclusive trans-selectivity.     

Reaction of (diacetoxyiodo)benzene with excess of trifluoromethanesulfonic acid. A convenient route to para-phenylene type hypervalent iodine oligomers

Reaction of (diacetoxyiodo)benzene [PhI(OAc)₂] in trifluoromethanesulfonic acid (TfOH) resulted in oligomerization of PhI(OAc)₂. Quenching with NaBr gave the bromide salts of hypervalent iodine oligomers that were determined by thermolysis with KI to be a para phenylene type of oligomers. Neutralization of the reaction mixture of PhI(OAc)₂ and TfOH with aqueous NaHCO₃ yielded the triflate salts of iodine oligomers. Furthermore, quenching the reaction mixture with aromatic substrates afforded arylated iodine oligomers. These iodine oligomers were found to be 3-4 of the number average degree of polymerization (P_n) by GC analysis of the thermolysis products and ¹H NMR analysis. The major products, trimer and tetramer, were synthesized independently.     

PhI(OTf)2 Does Not Exist (Yet)**

PhI(OTf)₂ has been used for the past 30 years as a strong I(III) oxidant for organic and inorganic transformations. It has been reported to be generated in situ from the reactions of either PhI(OAc)₂ or PhI=O with two equivalents of trimethylsilyl trifluoromethanesulfonate (TMS-OTf). In this report it is shown that neither of these reactions generate a solution with spectroscopic data consistent with PhI(OTf)₂, with supporting theoretical calculations, and thus this compound should not be invoked as the species acting as the oxidant for transformations that have been associated with its use.     

Highly selective acetoxylation of sulfonamides via using phenyliodine(III) diacetate

A highly efficient acetoxylation reaction of N-aryl-arylsulfonamides has been developed, presumably proceeding via the selective functionalization of N-aryl C–H bonds. A stoichiometric amount of PhI(OAc)₂ was generally employed as the oxidation reagent, and various para-acetoxylated sulfonamide derivatives had been generated in excellent yields. This chemistry endowed an economic synthesis of valuable acetoxylated sulfonamides through direct C–O bond formation processes.     

Intramolecular metal-catalyzed amination of pseudo-anomeric C-H bonds

Intramolecular metal-catalyzed amination of a pseudo-anomeric C-H bond in a C-glycoside is reported. Treatment of α,β-C-carbamoyloxymethyl- or β-C-sulfamoyloxymethyl glycosides with Rh₂(OAc)₄, PhI(OAc)₂, and MgO provided original spirooxazolidines or spirooxathiazolidines in reasonable yields. No correlation between ‘anomeric’ stereochemistry and insertion efficiency was found for the conversion of carbamate derivatives whereas amination reactions of the corresponding sulfamate esters were found to be strongly dependent on the anomeric configuration.     

Metal-free chemoselective oxidation of sulfides by in situ generated Koser’s reagent in aqueous media

Selective oxidation of sulfides was successfully performed by employing phenyliodine diacetate as an oxidant with the catalysis of TsOH in aqueous solution under mild conditions. Sulfoxides were formed with 1.1 equiv of PhI(OAc)₂ at room temperature; whereas sulfones were obtained in the presence of 2.1 equiv of PhI(OAc)₂ at 80 °C under otherwise identical conditions. Notably, various sulfides were converted to corresponding sulfoxides or sulfones in good to high yields by this metal-free protocol.     

Regioselective ortho-acetoxylation/methoxylation of N-(2-benzoylphenyl)benzamides via substrate directed C-H activation

A highly regioselective ortho-acetoxylation of N-(2-benzoylphenyl)benzamides has been achieved using a catalytic amount of Pd(OAc)₂ (10 mol %) and a stoichiometric amount of PhI(OAc)₂ in a mixture of acetic anhydride and acetic acid via C-H activation to produce the corresponding 2-acetoxybenzamides in good yields. ortho-Methoxylation has been accomplished using methanol under similar conditions.     

PhI(OAc)2-mediated iminobromination for synthesis of bromomethyl cyclic imines starting from alkenyl carbonitriles and Grignard reagents

PhI(OAc)₂-mediated iminobromination was developed starting from alkenyl carbonitriles and Grignard reagents. The present transformation is carried out by a sequence of nucleophilic addition of Grignard reagents to alkenyl carbonitriles to form N-H imines and their iminohalogenation by subsequent treatment with PhI(OAc)₂.     

A mild and efficient amidation of cyclic ethers catalyzed by rhodium caprylate

A small quantity of Rh₂(O₂CC₇H₁₅)₄ (2.5 mol % to 0.6 mol %) catalyzed the α-amidation of cyclic ethers under mild conditions, 35 °C, in the presence of electron-withdrawing p-chlorobenzenesulfonamide/PhI(OAc)₂ as the nitrene source, in CH₂Cl₂ for 4 h. The corresponding N-substituted amino cyclic ethers were successfully obtained in good yields (up to 87% based on 99% conversion) and compatibility with other oxidant sensitive structures in one-pot reaction.     

Cooperative Effect of Two Metals: CoPd(OAc)4‐Catalyzed CH Amination and Aziridination

The first Co/Pd‐cocatalyzed intramolecular C?H amination and aziridination reactions were developed. Sulfamate esters were converted to oxathiazinanes by using CoPd(OAc)₄ as catalyst and PhI(OAc)₂ as oxidant. The mutual presence of both Co and Pd is crucial for the catalytic activity. This combination of two metals with simple acetate ligands provides an economical alternative to the Rh‐catalyzed insertion of nitrenoids into C?H bonds.     

Epoxidation of olefins catalyzed by manganese(III) porphyrin in a room temperature ionic liquid

The epoxidation of several alkenes catalyzed by (meso-tetrakis(pentafluorophenyl)porphinato) manganese(III) chloride (MnTFPPCl) was carried out in a 3:1 [bmim]PF₆ ionic liquid/CH₂Cl₂ mixed solvent. The conversion and the yield of epoxide are excellent. It was also found that [bis(acetoxy)iodo]benzene [PhI(OAc)₂] is a more efficient oxidant than PhIO. The catalyst in the ionic liquids can be recycled for several runs without substantial diminution in the catalytic activity.     

NIS/PhI(OAc)2‐Mediated Diamination/Oxidation of N‐Alkenyl Formamidines: Facile Synthesis of Fused Tricyclic Ureas

Facile synthesis of bicyclic ureas by NIS/PhI(OAc)₂‐mediated diamination/oxidation of N‐alkenyl formamidines is reported. Bulky aromatic groups such as 2,6‐diisopropylphenyl and mesityl and alkyl groups were tolerated towards the process. Several control experiments have been performed, and the reaction outcomes indicate that the oxidation process is probably concerted with the diamination cyclization, and succinimide generated from NIS‐mediated aminoamidiniumation step promoted the PhI(OAc)₂‐mediated oxidation step. The new methodology provides an efficient method for the synthesis of fused tricyclic ureas.     

One-pot synthesis of isoxazoles from enaminones: an application of Fe(II) as the catalyst for ring expansion of 2H-azirine intermediates

We report an application of FeCl₂ as an inexpensive, nontoxic, and efficient catalyst in a clean ring expansion reaction of 2H-azirine derivatives, an intermediate formed through the PhI(OAc)₂-mediated azirination of readily available enaminones. An alternative one-pot protocol for the synthesis of various substituted isoxazoles from their corresponding enaminones has been further established based on this reaction, and herein described.     

A facile approach to [1,2,4]triazolo[3,4-i]purine via PIDA oxidation ring-closing reaction

A facile conversion of 6-(2-arylidenehydrazineyl) purines to [1,2,4] triazolo [3,4-i] purines is presented using PhI(OAc)₂ as oxidant in only 10 min under room temperature. This approach is metal-free, wide functional group tolerant, and provides an efficient and convenient method to synthesize purine-fused tricyclics.     

Chelation-assisted palladium-catalyzed acyloxylation of benzyl sp C-H bonds using PhI(OAc)2 as oxidant

A chelation-assisted palladium-catalyzed acyloxylation of the sp³ C-H bond of benzyl by carboxylic acid is described, which employs PhI(OAc)₂ as a stoichiometric oxidant. The procedure tolerates a series of functional groups, such as methoxyl, chloro, bromo, iodo, vinyl, formyl, phenolic hydroxyl, nitro, and cyano groups, providing the acyloxylation products in moderate to good yields.     

Synthesis of seco-psymberin/irciniastatin A: the discovery of a novel PhI(OAc)2 mediated cascade cyclization reaction

The psymberin unsaturated ‘psymberate’ side chain 7 was synthesized in 7 steps (36% yield) with good diastereoselectivity using commercially available starting material to control the stereochemistry at C₄ and C₅. The synthesis of seco-psymberin was completed in an efficient manner based on a CuI mediated coupling reaction between vinyl iodide 8 and ‘psymberamide’ 7. In an attempt to synthesize natural psymberin from the seco-intermediate, a novel PhI(OAc)₂ mediated cascade ring closing reaction was discovered. A possible mechanistic pathway for the formation of the ring closing product was presented.     

Gold-catalyzed direct oxidative coupling reactions of non-activated arenes

A general gold-catalyzed oxidative homo- and hetero-coupling of arenes in mild conditions is described. This reaction gives moderate to excellent yield using PhI(OAc)₂ as an oxidant. The effects of temperature, solvent, oxidant and concentration of substrate in this process have also been studied in detail. The product identity and distribution as well as the substrate limitation give us insights into this type of gold catalysts. Depending upon the reaction conditions, the gold catalyst behaves as a simple Lewis acid, which produces amines from arenes using DIAD as an aminating reagent.     

Oxidative nitration of the amino group: synthesis of dinitramide and cyanonitramide salts

A convenient preparative method for the synthesis of potassium dinitramide and cyanonitramide salts was developed. The method involves reactions of nitramide or cyanamide with KNO₂ and PhI(OAc)₂ or PhIO in methanol.     

An efficient one-step synthesis of fulleroisoxazolines and fulleropyrazolines mediated by (diacetoxyiodo)benzene

An efficient one-step strategy for the synthesis of fulleroisoxazolines/fulleropyrazolines from fullerene and aldoximes/hydrazones mediated by PhI(OAc)₂ has been described.