Ternary Systems LiBr–LiVO<Subscript>3</Subscript>–Li<Subscript>2</Subscript>CrO<Subscript>4</Subscript> and KBr–KVO<Subscript>3</Subscript>–K<Subscript>2</Subscript>CrO<Subscript>4</Subscript>

The binary system KVO₃–K₂CrO₄ and two ternary systems, LiBr–LiVO₃–Li₂CrO₄ and KBr–KVO₃–K₂CrO₄, were studied. In the ternary systems, the compositions and melting points of eutectic alloys were determined by differential thermal analysis: (49.0 mol % LiBr, 5.0 mol % LiVO₃, 46.0 mol % Li₂CrO₄, 400°C) and (17.0 mol % KBr, 78.0 mol % KVO₃, 5.0 mol % K₂CrO₄, 458°C), respectively.     

<Superscript>35</Superscript>Cl NQR for the SbCl<Subscript>3</Subscript> complex with aniline,SbCl<Subscript>3</Subscript>·NH<Subscript>2</Subscript>C<Subscript>6</Subscript>H<Subscript>5</Subscript>

The temperature dependence of the ³⁵Cl NQR frequencies and spin-lattice relaxation times has been investigated for a trigonal-bipyramidal vn complex SbCl₃·NH₂C₆H₅. Thermally activated motion of chlorine atoms (pseudorotation) was not revealed in the complex, in contrast to the vπ complexes of SbCl₃ with related molecular structures. The high potential barrier of pseudorotation in the aniline complex is likely to be due to the unusually high nonequivalence of Sb-Cl chemical bonds.     

New continuous solid solution in the Zn<Subscript>2</Subscript>InV<Subscript>3</Subscript>O<Subscript>11</Subscript>–Mg<Subscript>2</Subscript>InV<Subscript>3</Subscript>O<Subscript>11</Subscript> system

In this study, mechanical activation process was used for intimate mixing as well as producing finely ground particles, increased surface area and improved chemical reactivity of milled materials for producing SrTiO₃ from commercially pure strontium carbonate and TiO₂ as a contributive process. Characterization of milled powder mixture by X-ray diffraction analysis showed that disappearing, decreasing and/or shifting of the patterns occurred with mechanical activation that means amorphization was taken place. Amorphization was also demonstrated by FT-IR analysis where shift of band centers as well as the decrement of transmittance related to CO₃ was observed. Advantage of amorphization was established with high-temperature XRD analysis which showed 1300 °C was not enough for non-activated mixture to form SrTiO₃, whereas structure only composed of SrTiO₃ at 1000 °C for activated ones. The reason for this phenomenon was investigated by DTA-TG analysis, and it was based on energy accumulation originated from mechanical activation that corresponds to peak temperature shifting to the lower temperatures and CO₂ liberation at mechanical activation step arising from local temperature rising at the vial during high-energy milling that was understood from peak temperature, and area decrement of endothermic peak corresponds to decomposition of SrCO₃.     

Zr<Subscript>5</Subscript>Ir<Subscript>2</Subscript>In<Subscript>4</Subscript> – A Superstructure of the Lu<Subscript>5</Subscript>Ni<Subscript>2</Subscript>In<Subscript>4</Subscript> Type

Summary. Zr₅Ir₂In₄ was synthesized by reaction of the elements in a glassy carbon crucible in a water-cooled sample chamber of an induction furnace. The sample was characterized by X-ray diffraction on both powder and single crystals. Zr₅Ir₂In₄ crystallizes with a pronounced Lu₅Ni₂In₄ type subcell, space group Pbam, a=1739.5(6), b=766.3(2), c=338.9(2) pm. Weak additional reflections force a doubling of the subcell c axis. The superstructure of Zr₅Ir₂In₄ is of a new type: Pnma, a=1739.5(6), b=677.8(2), c=766.3(2) pm, wR2=0.0529, 1592 F² values, and 60 variable parameters. The group-subgroup scheme for the klassengleiche symmetry reduction is presented. The formation of the superstructure is most likely due to a puckering effect (size of the iridium atoms). The crystal chemistry of Zr₅Ir₂In₄ is briefly discussed.     

Interactions in the Sn<Subscript>2</Subscript>Sb<Subscript>6</Subscript>S<Subscript>11</Subscript>–PbSnSb<Subscript>4</Subscript>S<Subscript>8</Subscript> system

The Sn₂Sb₆S₁₁–PbSnSb₄S₈ system was studied by physicochemical analysis methods (differential thermal, X-ray powder diffraction, and microstructural analyses and microhardness and density measurements). It was found that this system is a quasi-binary section of the SnS–PbS–Sb₂S₃ ternary system of the eutectic type. The coordinates of the eutectic are 42 mol % PbSnSb₄S₈ and 600 K. In the studied system, regions of solid solutions were detected, which extend for solid solutions based on Sn₂Sb₆S₁₁ to 4 mol % PbSnSb₄S₈ (α) and for solid solutions based on PbSnSb₄S₈ to 6 mol % Sn₂Sb₆S₁₁ (β).     

Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-K<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-H<Subscript>2</Subscript>O system at 25°C

Phase formation in the Na₂MoO₄-K₂MoO₄-H₂O system was studied at 25°C. Two incongruently saturating complex phases are formed in this system: Na₃K(MoO₄)₂ · 9H₂O and NaK₃(MoO₄)₂. The densities, refractive indices, and dynamic viscosities of saturated solutions of the system were determined; molar volume and ionic strength isotherms were calculated. A correlation relation was found between solubility and solution properties in the system. The indicated double salts were recovered and characterized using chemical analysis, powder X-ray diffraction, complex thermal analysis, and IR spectroscopy.     

Transformations of CO<Subscript>2</Subscript> in Two-Phase Systems C<Subscript>8</Subscript>F<Subscript>18</Subscript>–H<Subscript>2</Subscript>O and C<Subscript>6</Subscript>F<Subscript>6</Subscript>–H<Subscript>2</Subscript>O

The transformation of carbon dioxide in aqueous emulsions of perfluorons in the presence of oxygen in the air results in the formation of a mixture of oxalic acid and a minor set of organic compounds C₄–C₈. The maximum CO₂ consumption occurs in the emulsion with the C₈F₁₈: H₂O vol/vol ratio of 1: 0.42 at pH 2.4; the H₂C₂O₄ yield is 11 mol %.     

Glass Formation in the Ternary System La<Subscript>2</Subscript>O<Subscript>3</Subscript>–As<Subscript>2</Subscript>S<Subscript>3</Subscript>–Er<Subscript>2</Subscript>O<Subscript>3</Subscript>

The boundaries of the glass formation region in the ternary system La₂O₃–As₂S₃–Er₂O₃ were found. Transparent glass of composition (La₂O₃)_0.03(As₂S₃)0.90(Er₂O₃)0.07 was studied by X-ray photoelectron and Raman spectroscopy. The intensities of the bands characterizing As–S, La–O, and Er–O bonds increased, and these bands were shifted toward higher energies. This was due to an increase in the covalence of these bonds and probably due to the formation of new bonds in the glasses. Samples in the glass formation region are resistant at 300 K to air, water, and organic solvents.     

Interaction in the systems TlBiSe<Subscript>2</Subscript>–Tl<Subscript>9</Subscript>BiSe<Subscript>6</Subscript>–PbSe and Tl<Subscript>9</Subscript>BiSe<Subscript>6</Subscript>–Tl<Subscript>4</Subscript>PbSe<Subscript>3</Subscript>–PbSe

Phase equilibria in the systems TlBiSe₂–Tl₉BiSe₆–PbSe and Tl₉BiSe₆–Tl₄PbSe₃–PbSe were studied by differential thermal, X-ray powder diffraction, and microstructural analyses. State diagrams of the quasi-binary sections Tl₉BiSe₆–Tl₄PbSe₃, TlBiSe₂–PbSe, and Tl₉BiSe₆–PbSe were constructed, and so were projections of liquidus surfaces and isothermal sections at 600 K for the secondary quasi-ternary systems TlBiSe₂–Tl₉BiSe₆–PbSe and Tl₄PbSe₃–Tl₉BiSe₆–PbSe. The coordinates of invariant points and the boundaries of solid solutions were determined.     

Crystal structure of glycine phosphite C<Subscript>2</Subscript>H<Subscript>5</Subscript>NO<Subscript>2</Subscript>·H<Subscript>3</Subscript>PO<Subscript>3</Subscript>

Single crystal X-ray diffraction study of glycine phosphite C₂H₅NO₂·H₃PO₃ was performed (monoclinic, space group P2₁/c, a = 7.401(3) Å, b = 8.465(3) Å, c = 9.737(3) Å; β = 100.73(5)°, Z = 4). It has been found that one of hydrogen atoms is located at the centre of symmetry forming two strong hydrogen bonds to yield H₄P₂O ₆ ^?2 dimers, while another hydrogen atom is statistically disordered over two positions and organizes the dimers into an infinite corrugated chain. The ordering of this hydrogen atom position and/or displacement of the other one from the centre of symmetry will lead to the loss of symmetry centre and lowering of the point group symmetry from C_2h to piezo-active group C₂ or C _s .     

Reciprocal system 3Tl<Subscript>2</Subscript>S + Sb<Subscript>2</Subscript>Se<Subscript>3</Subscript> ⇆ 3Tl<Subscript>2</Subscript>Se + Sb<Subscript>2</Subscript>S<Subscript>3</Subscript>

Phase equilibria in the reciprocal system 3Tl₂S + Sb₂Se₃ ? 3Tl₂Se + Sb₂S₃ are investigated by DTA, X-ray powder diffraction, and emf measurements. Some polythermal sections, the isothermal section of the phase diagram at 400K, and the liquidus-surface projection for this system are constructed. The types and coordinates of invariant and univariant equilibria are determined. It is shown that the system is non-diagonal. Broad regions of solid solutions are found on the basis of the binary compounds Tl₂S and Tl₂Se and along the boundary system Sb₂S₃-Sb₂Se₃ and the sections Tl₃SbS₃-Tl₃SbSe₃, TlSbS₂-TlSbSe₂, and TlSb₃S₅-TlSb₃Se₅ of the phase diagram.     

CsBr—Cs<Subscript>2</Subscript>ZnBr<Subscript>4</Subscript>—Cs<Subscript>2</Subscript>CdBr<Subscript>4</Subscript>—Cs<Subscript>2</Subscript>HgBr<Subscript>4</Subscript> Four-component system

Component interactions in the CsBr—Cs₂ZnBr₄—Cs₂CdBr₄—Cs₂HgBr₄ system were studied using differential thermal analysis (DTA) and powder X-ra y diffraction. The system is characterized by a continuous solid solution series. New compounds have not been found.     

From Cs<Subscript>2</Subscript>Mo<Subscript>6</Subscript>Cl<Subscript>14</Subscript> to Cs<Subscript>2</Subscript>Mo<Subscript>6</Subscript>Cl<Subscript>14</Subscript>·H<Subscript>2</Subscript>O and Vice Versa: Crystal Chemistry Investigations

We report here the synthesis, the crystal structure and the luminescent properties of the new cluster compounds Cs₂Mo₆Cl₁₄·H₂O and Cs₂Mo₆Br₁₄·H₂O. Single-crystal X-ray diffraction performed on Cs₂Mo₆Cl₁₄·H₂O indicates that the compound crystallizes in the monoclinic space group C2/c with refined cell parameters a = 19.578 Å, b = 15.151 Å, c = 9.347 Å, and β = 115.64°. The structure can be described from discrete \(\left[ {{\text{Mo}}_{ 6} {\text{Cl}}^{\text{i}}_{ 8} {\text{Cl}}^{\text{a}}_{ 6} } \right]^{ 2- }\) anionic cluster units arranged in a “A–A’–A–A’” pseudo prismatic stacking parallel to (b, c) plane with both Cs⁺ cations and water molecules located between the layers. Moreover, the centric character of the trigonal structure of Cs₂Mo₆Cl₁₄ was also studied by combination of single-crystal X-ray diffraction and both X-ray and neutron powder diffraction. The results suggest an important influence of the sample preparation on the symmetry of the crystal structure. The crystal structure relationship between the \(\left[ {{\text{Mo}}_{ 6} {\text{Cl}}^{\text{i}}_{ 8} {\text{Cl}}^{\text{a}}_{ 6} } \right]^{ 2- }\) anionic cluster unit arrangements in Cs₂Mo₆Cl₁₄ and Cs₂Mo₆Cl₁₄·H₂O is discussed. Finally, the characterization of the luminescent properties of Cs₂Mo₆X₁₄ and Cs₂Mo₆X₁₄·H₂O (X = Cl, Br) indicates that emission profile is comparable regardless existence of water molecule in the crystal structure.     

Coordinatively Unsaturated Polynuclear Mixed-Valent Sn<Superscript>II</Superscript>–Sn<Superscript>IV</Superscript> and Cu<Superscript>II</Superscript>–Sn<Superscript>IV</Superscript> Oxo-Centered Carboxylates

The tetranuclear mixed-valent oxo-cluster [Sn^IISn^IVO(O₂CCF₃)₄]₂ (1) has been prepared by reacting SnCl₂ with AgO₂CCF₃ in a sealed ampoule at 90 °C. Alternatively, 1 was obtained by acidolysis of Ph₃SnSnPh₃ with trifluoroacetic acid in solution. The X-ray diffraction study of 1 revealed the presence of a Sn^IIOSn₂^IVOSn^II core comprised of the penta-coordinated divalent and six-coordinated tetravalent tin atoms. The ¹¹⁹Sn NMR studies confirmed the stability of the cluster in solution and the presence of two different oxidation states of tin. An acidolysis of Ph₃SnSnPh₃ in the presence of [Cu₂^II(O₂CCF₃)₄] followed by sublimation of the resulting product at 90 °C afforded the first trinuclear mixed metal Sn–Cu cluster [(C₆H₅)₂Sn₂^IVCu^IIO(O₂CCF₃)₆] (2). The X-ray diffraction analysis of 2 revealed the presence of two phenyl groups attached to the six-coordinated tin(IV) atoms and the tetragonal pyramidal environment of the copper(II) atom. Both complexes have been obtained free of exogenous ligands.     

Thermal studies of ZnO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–TeO<Subscript>2</Subscript> glasses

The effect of TeO₂ additions on the thermal behaviour of zinc borophosphate glasses were studied in the compositional series (100 − x)[0.5ZnO–0.1B₂O₃–0.4P₂O₅]–xTeO₂ by differential scanning calorimetry, thermodilatometry and heating microscopy thermal analysis. The addition of TeO₂ to the starting borophosphate glass resulted in a linear increase of glass transition temperature and dilatometric softening temperature, whereas the thermal expansion coefficient decreased. Most of glasses crystallize under heating within the temperature range of 440–640 °C. The crystallization temperature steeply decreases with increasing TeO₂ content. The lowest tendency towards crystallization was observed for the glasses containing 50 and 60 mol% TeO₂. X-ray diffraction analysis showed that major compounds formed by annealing of the glasses were Zn₂P₂O₇, BPO₄ and α-TeO₂. Annealing of the powdered 50ZnO–10B₂O₃–40P₂O₅ glass leads at first to the formation of an unknown crystalline phase, which is gradually transformed to Zn₂P₂O₇ and BPO₄ during subsequent heating.     

Hydration of CBr<Subscript>3</Subscript>COOH molecules and CBr<Subscript>3</Subscript>CO<Stack><Subscript>2</Subscript><Superscript>–</Superscript></Stack> anions in aqueous solutions

The optimal structures and the vibrational frequencies of H-bonded complexes formed from one-two CBr₃COOH molecules or the CBr₃CO ₂ ^– anion with water molecules are calculated by density functional theory (B3LYP/6-31++G(d,p)). The comparison of the obtained results with the known Raman spectra of the CBr₃COOH–H₂O and NaCBr₃CO ₂ ^– ·H₂O solutions (with component molar ratios of ≤1:16) shows that they include stable hydrates: CBr₃COOH·H₂O and CBr₃CO ₂ ^– ·(H₂O)₆. The first one has a cyclic form, and the second has a cubic globular form. The vibrational band frequencies of the CBr₃COOH molecule and the CBr₃CO ₂ ^– anion in the spectra of both solutions are almost completely determined by the mutual arrangement of units in these hydrates.     

Phase Diagram of the System Tl<Subscript>2</Subscript>Te–Tl<Subscript>5</Subscript>Te<Subscript>3</Subscript>–Tl<Subscript>9</Subscript>GdTe<Subscript>6</Subscript>

The ternary system Tl–Gd–Te within the composition range Tl₂Te–T_l5Te₃–T_l9GdTe₆ was studied by a set of physicochemical analysis methods. Some internal polythermal sections and the isothermal section at 300 K of the phase diagram were built, projections of the liquidus and solidus surfaces were constructed, and the graphs of the concentration dependences of the parameters and microhardness were plotted. It was shown that much (more than 90%) of the area of the concentration triangle is occupied by the homogeneity region of solid solutions with the Tl₅Te₃ structure (δ-phase). Solid solutions based on Tl₂Te (α-phase) form within a narrow region. The regions of the α- and δ-phases are separated by two-phase region α + δ.     

Structural and Temperature Dependent Electrical Conductivity Properties of Dy<Subscript>2</Subscript>O<Subscript>3</Subscript>–Sm<Subscript>2</Subscript>O<Subscript>3</Subscript> CO-Doped Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>

In the present work, Dy₂O₃ and Sm₂O₃ double-doped Bi₂O₃-based materials are synthesized by exploiting the solid-state synthesis method. The structural and temperature dependent electrical properties of these ternary ceramic samples, which are candidate materials for solid oxide fuel cell (SOFCs) electrolyte, are determined by means of a powder X-ray diffractometer (XRD), the four point-probe method (FPPM), and the thermal-gravimetry/differential thermal analysis (TG/DTA). As a result of the XRD measurements, the fluorite-type fcc δ-phase with a stable structure is obtained for higher values of the dopant oxide material, which are the samples with the maximum content of fixed 20% Dy₂O₃ and 15% and 20% Sm₂O₃. The samples with the stable δ-phase structure have higher conductivities. The highest electrical conductivity is found for the (Bi₂O₃)0.6(Dy₂O₃)_0.2(Sm₂O₃)_0.2 sample, which was 2.5×10^–2 (Ohm cm)^–1 at 750 °C. The activation energies are also calculated from the Arrhenius charts, which were determined from the FPPM measurements. The lowest activation energy is found as 0.85 eV for the sample with the highest electrical conductivity.