Salicylaldehyde hydrazones as fluorescent probes for zinc ion in aqueous solution of physiological pH

Salicylaldehyde hydrazones of 1 and 2 were synthesized and their potential as fluorescent probes for zinc ion was investigated in this paper. Both of the probes were found to show fluorescence change upon binding with Zn²⁺ in aqueous solutions, with good selectivity to Zn²⁺ over other metal ions such as alkali/alkali earth metal ions and heavy metal ions of Pb²⁺, Cd²⁺ and Hg²⁺. They showed 1:2 metal-to-ligand ratio when their Zn²⁺ complex was formed. By introducing pyrene as fluorophore, 2 showed interesting ratiometric response to Zn²⁺. Under optimal condition, 2 exhibited a linear range of 0-5.0 μM and detection limit of 0.08 μM Zn²⁺ in aqueous buffer, respectively. The detection of Zn²⁺ in drinking water samples using 2 as fluorescent probe was successful.     

Complete suppression of the fluorophore fluorescence by combined effect of multiple fluorescence quenching groups: A fluorescent sensor for Cu with zero background signals

The reaction-based fluorescent sensors have attracted increasing attention in the past decades. However, the application of these sensors for accurate sensing was significantly retarded by the background fluorescence from the sensors themselves. In this work, we demonstrated a novel strategy that the background fluorescence of the sensor could be completely eliminated by the combined effect of multiple fluorescence quenching groups. Based on this new strategy, as proof-of-principle study, a fluorescent sensor (CuFS) for Cu²⁺ was judiciously developed. In CuFS, three types of fluorescence quenching groups were directly tethered to a commonly used coumarin fluorophore. The fluorescence of coumarin fluorophore in CuFS was completely suppressed by the combined effect of these fluorescence quenching groups. Upon treatment with 22 μM Cu²⁺, sensor CuFS achieved a dramatic fluorescence enhancement (fluorescence intensity enhanced up to 811-fold) centered at 469 nm. The detection limits was determined to be 12.3 nM. The fluorescence intensity enhancement also showed a good linearity with the Cu²⁺ concentration in the range of 12.3 nM to 2 μM. By fabricating test strips, sensor CuFS can be utilized as a simple tool to detect Cu²⁺ in water samples. Furthermore, the fluorescent sensor was successfully applied in detecting different concentration of Cu²⁺ in living cells.     

A rigid conjugated pyridinylthiazole derivative and its nanoparticles for divalent copper fluorescent sensing in aqueous media

A rigid conjugated pyridinylthiazole derivative (1) and two bithiazole derivatives with similar structures (2, 3) were synthesized and characterized. Their optical properties were investigated through spectral analysis. By applying the three compounds to Cu²⁺ ions detection, it was shown that compound 1 could be employed as a selective and sensitive Cu²⁺ ions fluorescent chemosensor. For aqueous assay, the nanoparticles of compound 1 were prepared in aqueous media. Compared to the monomer, 1 nanoparticles were more fluorescence sensitive to Cu²⁺ ions. Its binding mode with Cu²⁺ ions was correlated well with Langmuir equation. Compound 1 nanoparticles exhibit a dynamic working range for Cu²⁺ ions from 0.02 to 0.50 μM with a detection limit of 10 nM. The proposed chemosensor has been used for the direct measurement of Cu²⁺ content in drinking water samples with satisfying results.     

An efficient sensor for relay recognition of Zn and Cu through fluorescence ‘off–on–off’ functionality

A new bis(8-carboxamidoquinoline) dangled binaphthol derivatized fluorescent sensor (L) was designed and synthesized. L behaves ratiometric response to Zn²⁺ with high selectivity accompanied by remarkable emission enhancement and red shift. The resultant L–Zn²⁺ complex can act as a Cu²⁺ sensing probe with fluorescence quenching behavior through direct Zn²⁺ ion replacement. Furthermore, the binding modes of Zn²⁺ and Cu²⁺ with L are elucidated by X-ray crystallographic analysis, respectively.     

Linear Schiff-base fluorescence probe with aggregation-induced emission characteristics for Al detection and its application in live cell imaging

A simple Schiff-base derivative with salicylaldehyde moieties as fluorescent probe 1 was reported by aggregation-induced emission (AIE) characterization for the detection of metal ions. Spectral analysis revealed that probe 1 was highly selective and sensitive to Al³⁺. The probe 1 was also subject to minimal interference from other common competitive metal ions. The detection limit of Al³⁺ was 0.4 μM, which is considerably lower than the World Health Organization standard (7.41 μM), and the acceptable level of Al³⁺ (1.85 μM) in drinking water. The Job's plot and the results of ¹H-NMR and FT-IR analyses indicated that the binding stoichiometry ratio of probe 1 to Al³⁺ was 1:2. Probe 1 demonstrated a fluorescence-enhanced response upon binding with Al³⁺ based on AIE characterization. This response was due to the restricted molecular rotation and increased rigidity of the molecular assembly. Probe 1 exhibited good biocompatibility, and Al³⁺ was detected in live cells. Therefore, probe 1 is a promising fluorescence probe for Al³⁺ detection in the environment.     

Ratiometric chemosensor for fluorescent determination of Zn2+ in aqueous ethanol

A new ratiometric and selective fluorescent chemosensor (1) for quantification of zinc ions in aqueous ethanol has been synthesized and investigated in this work. In an environmentally friendly media of 30% (v/v) water/ethanol and 10 mM Tris-HCl neutral buffer (pH 7.03), 1 displayed selective Zn²⁺ ratiometric fluorescence response, with a dynamic working range of 1.0-8.0 μM and a detection limit of 0.5 μM Zn²⁺. The determination of Zn²⁺ in synthesized water sample was also successful.     

Ratiometric fluorescent Zn chemosensor constructed by appending a pair of carboxamidoquinoline on 1,2-diaminocyclohexane scaffold

By appending a pair of carboxamidoquinoline pendants onto 1,2-diaminocyclohexane scaffold via N-alkylation, multifunctionalized ACAQ was designed and synthesized as a water soluble fluorescent ratiometric chemosensor for Zn²⁺. In 50% aqueous methanol buffer pH 7.4 solution, upon excitation at 316 nm, ACAQ (5 μM) displayed a selective ratiometric fluorescence changes with a shift from 410 to 490 nm in response to the interaction with Zn²⁺. After binding with 1 equiv of Zn²⁺, ACAQ exhibited a 12-fold enhancement in I₄₉₀/I₄₁₀ characterized by a clear isoemissive point at 440 nm. The metal sensor binding mode was established by Job’s plot and the combined fluorescence and ¹H NMR spectroscopic method. The selectivity of the probe toward biological relevant cations and transition metal ions was proven to be good. In addition, the interference caused by Cu²⁺ and Cd²⁺ in the quantitation of Zn²⁺ can be completely eliminated by the use of diethyldithiocarbamate as the screening agent. Exploitation of ACAQ as the sensing probe, ratiometric determination of Zn²⁺ with the limit of detection (LOD) at 28.3 nm can be realized. In addition, the unique responsive properties of the probe toward Fe³⁺ and Zn²⁺ were used to construct a fluorescent switch. The membrane permeability of ACAQ to living cells and bio-imaging of Zn²⁺ were demonstrated.     

A fluorescent and colorimetric chemosensor for selective detection of aluminum in aqueous solution

We have synthesized a new Schiff base 1, which detects Al³⁺ through fluorescence and naked eye in aqueous solution. The sensor 1 exhibited selective and sensitive recognition toward Al³⁺ via significant fluorescence enhancement (31-fold). Moreover, it showed a significant color change from colorless to yellow. The complex formation was proposed to be 1:1 ratio, based on the Job plot, ESI-mass spectrometry analysis, ¹H NMR titration, and IR analysis. The detection limit was 1.00 μM, which is below the WHO acceptable limit (1.85 μM) in drinking water. In addition, the sensor 1 could be recyclable simply through treatment with a proper reagent such as EDTA.     

Simple imine linked colorimetric and fluorescent receptor for sensing Zn ions in aqueous medium based on inhibition of ESIPT mechanism

Herein, we report the highly selective binding of Zn²⁺ ion by the salicylaldimine based Schiff base chromogenic receptor 1 [(N,N′-bis (salicylidine)-o-phenylenediamine]. Receptor 1 senses Zn²⁺ ion in aqueous medium by colorimetric and fluorescent response in the presence of other metal ions like Pb²⁺, Hg²⁺, Sn²⁺, Cd²⁺. Receptor 1 on binding with Zn²⁺ ion exhibits fluorescence enhancement which is due to the inhibition of the (ESIPT) mechanism.     

Microwave-assisted synthesis of 3-hydroxy-4-pyridinone/naphthalene conjugates. Structural characterization and selection of a fluorescent ion sensor

Two novel 3-hydroxy-4-pyridinone/naphthalene conjugates (L1 and L2) with different distances between the chelating and the fluorescent moieties were synthesized using conventional heating and microwave irradiation achieving a shorter reaction time. The structure of both compounds was confirmed by X-ray crystallography, revealing that these compounds were isolated as hydrochloride salts in dihydroxypyridinium forms. In solution and in the presence of a base, the tautomeric keto forms may be obtained as it was elucidated by NMR analysis. The dihydroxypyridinium form of L1 exhibits fluorescence at 450 nm, both in ACN and DMSO, whereas the corresponding keto form exhibits fluorescence at 365 nm. In contrast, the dihydroxypyridinium form of L2 only fluoresces in DMSO, exhibiting a band at 340 nm, while the keto form is non-fluorescent. These distinct fluorescent behaviors reveal that the tautomeric form in which the ligands are isolated and the distance between the chelating and fluorescent functions strongly influences their fluorescence properties. Ligand L1 exhibits better fluorescence properties and its fluorescence intensity is quenched in the presence of variable concentration of Cu²⁺, Zn²⁺, and Fe³⁺, thus making it suitable to be used as ion sensor.     

Fluorescence sensing of Cu within a pseudo 18-crown-6 cavity

We report herein a pseudo-crown based fluorescent receptor (1) for the selective detection of Cu²⁺ cation. Receptor 1 can detect Cu²⁺ even in 5 μM level in acetonitrile-water (9:1 v/v). Compound 1 is very effective for the detection of Cu²⁺ amongst the series of metal ions studied (Li⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Pb²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Mn²⁺).     

Mono- and oligosaccharide sensing by phenylboronic acid-appended 5,15-bis(diarylethynyl)porphyrin complexes

Porphyrin derivatives bearing a pair of boronic acid groups (1, 1·Zn, and 1·Cu) were designed and synthesized from 2 to construct a saccharide sensing system. Compounds 1, 1·Zn, and 1·Cu have a diethynyl porphyrin rotational axis, which is expected to act as a saccharide-binding modulator. Saccharide binding studies were conducted by UV-vis, fluorescence, and circular dichroism (CD) spectroscopies. In a water-methanol 1:1 (v/v) mixed solvent, we have found that 1·Zn can bind mono- and oligosaccharides including Lewis oligosaccharides to produce 1:1 host-saccharide complexes with the association constants of 10²−10³ M⁻¹ range. This paper thus demonstrates a new principle to design a boronic acid-based saccharide receptor.     

A reversible fluorescent–colorimetric Schiff base sensor for Hg ion

A simple (R)-(−)-2-phenylglycinol functionalized Schiff base L1 and its characterization as a fluorescent–colorimetric sensor for Hg²⁺ ion are described. The UV–vis and fluorescence analysis in methanol and aqueous solution show complex formation between L1 and Hg²⁺ ion with a micromolar association constant. Competition experiments performed for the acetate salts of Hg²⁺, Zn²⁺, Co²⁺, Pb²⁺, Cd²⁺, Mn²⁺, Cu²⁺, Ni²⁺, and Ba²⁺ revealed that compound L1 exhibits high selectivity toward Hg²⁺ displaying a color change easily detectable by naked-eye and a turn-off fluorescent effect due to a chelation-enhanced quenching (CHEQ) mechanism. Moreover, addition of EDTA to L1–Hg²⁺ recovers the fluorescence and color offering receptor L1 as a reversible sensor for real-time applications.     

Three different fluorescent responses to transition metal ions using receptors based on 1,2-bis- and 1,2,4,5-tetrakis-(8-hydroxyquinolinoxymethyl)benzene

The dipod 1,2-bis(8-hydroxyquinolinoxymethyl)benzene (3) and tetrapod 1,2,4,5-tetrakis(8-hydroxyquinolinoxymethyl)benzene (5) have been synthesized through nucleophilic substitution of respective 1,2-bis(bromomethyl)benzene (2) and 1,2,4,5-tetra(bromomethyl)benzene (4) with 8-hydroxyquinoline (1). For comparison, 1,3,5-tris(8-hydroxyquinolinoxymethyl)benzene derivatives (7a and 7b) have been obtained. The complexation behavior of these podands towards Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ metal ions has been investigated in acetonitrile by fluorescence spectroscopy. The sterically crowded 1,2,4,5-tetrapod 5 displays unique fluorescence ‘ON-OFF-ON’ switching through fluorescence quenching (λ_max 395 nm, switch OFF) with <1.0 equiv of Ag⁺ and fluorescence enhancement (λ_max 495 nm, switch ON) with >3 equiv Ag⁺ and can be used for estimation of two different concentrations of Ag⁺ at two different wavelengths. The addition of Cu²⁺, Ni²⁺, and Co²⁺ metal ions to tetrapod 5 causes fluorescence quenching, i.e., ‘ON-OFF’ phenomena at λ_max 395 nm for <10 μM (1 equiv) of these ions but addition of Zn²⁺ and Cd²⁺ to tetrapod 5 results in fluorescence enhancement with a gradual shift of λ_em from 395 to 432 and 418 nm, respectively. Similarly, dipod 3 behaves as an ‘ON-OFF-ON’ switch with Ag⁺, an ‘ON-OFF’ switch with Cu²⁺, and an ‘OFF-ON’ switch with Zn²⁺. The placement of quinolinoxymethyl groups at the 1,3,5-positions of benzene ring in tripod 7a-b leads to simultaneous fluorescence quenching at λ_max 380 nm and enhancement at λ_max 490 nm with both Ag⁺ and Cu²⁺. This behavior is in parallel with 8-methoxyquinoline 8. The rationalization of these results in terms of metal ion coordination and protonation of podands shows that 1,2 placement of quinoline units in tetrapod 5 and dipod 3 causes three different fluorescent responses, i.e., ‘ON-OFF-ON’, ‘ON-OFF’, and ‘OFF-ON’ due to metal ion coordination of different transition metal ions and 1, 3, and 5 placement of three quinolines in tripod 7, the protonation of quinolines is preferred over metal ion coordination. In general, the greater number of quinoline units coordinated per metal ion in 5 compared with the other podands points to organization of the four quinoline moieties around metal ions in the case of 5.     

Naphthalimide-based fluorescent Zn chemosensors showing PET effect according to their linker length in water

We have developed naphthalimide-based fluorescent chemosensors that exhibit fluorescence enhancement upon binding Zn²⁺ ion in 10 mM HEPES buffer (pH 7.4) at 25 °C. The fluorescence enhancement was induced by a PET inhibition process in which electron transfer from the nitrogen lone pair electrons of the Dpa unit to naphthalimide was blocked upon the binding of the sensor to Zn²⁺. The longer the linker length (n = 1-3) of the sensor, the less the PET efficiency becomes. Among the sensors (1, 2, and 3) examined, 1 shows the highest selectivity and sensitivity for Zn²⁺ over other transition metal ions and alkali metal ions in water.     

Fluorogenic dual click derived bis-glycoconjugated triazolocoumarins for selective recognition of Cu(II) ion

Carbohydrate based fluorescent sensors S1 and S2 have been developed by fluorogenic dual click chemistry and are characterized by various spectroscopic techniques. Both the fluorescent probes displayed highly selective detection of Cu²⁺ ions by means of fluorescence quenching. The job plot experiment suggested 1:1 complexation of probes S1 and S2 with Cu²⁺ ions having detection limit of 6.99 μM and 7.30 μM, respectively. The binding constants for S1-Cu²⁺ and S2-Cu²⁺ complexation were evaluated to be 3.34 × 10³ M⁻¹ and 5.93 × 10³ M⁻¹, respectively.     

Fluorogenic ratiometric dipodal optode containing imine-amide linkages: Exploiting subtle thorium (IV) ion sensing

The (13E,19E)-N1′,N3′-bis[4-(diethylamino)-2-hydroxybenzylidene]malonohydrazide (L) has been developed for the detection of Th⁴⁺ ions using dual channel signalling system. The UV–vis absorbance and fluorescence spectroscopic data revealed the formation of L–Th⁴⁺ complex in 1:1 equilibrium. The density functional theory (DFT) also confirms the optimum binding cavity for the recognition of metal ion. The binding constant computed from different mathematical models for an assembly of L–Th⁴⁺. The detection limit of L for Th⁴⁺ recognition is to a concentration down to 0.1 μM (0.023 μg g⁻¹). The present sensing system is also successfully applied for the detection of Th⁴⁺ ion present in soil near nuclear atomic plants.     

Novel fluorescent sensor for Ag and Hg based on the BINOL-pyrene derivative via click reaction

A novel BINOL-pyrene derivative sensor 1 for Ag⁺ and Hg²⁺ incorporating the triazole moieties and pyrenes was synthesized via click reaction. Binding of Ag⁺ ion induces the formation of 1:1 Ag⁺-1 chelating complex, and occurs in a ratiometric manner through an enhanced monomer and declining excimer emission, which make it possible to ratiometrically detect Ag⁺. The competitive experiment shows 1 can be used as an Ag⁺ specific fluorescence sensor over a wide range of competing cations. In the meanwhile, the sensor 1 was found to be selectively quenched by only Hg²⁺ at both monomer and excimer emission. Furthermore, we obtained evidences for different fluorescence signaling behaviors with Ag⁺ and Hg²⁺ by ¹H NMR titration experiments.     

Zinc selective chemosensor based on pyridyl-amide fluorescence

Chemosensors are developed to image zinc ions. Fluorescence enhancement due to Zn²⁺ binding is an excellent way to detect its presence. A chemosensor for Zn²⁺ based on dipicolylamine (DPA) groups connected by a pyridyl amide backbone has been synthesized. Addition of 2-chloroacetyl chloride to 2,6-diaminopyridine affords 2,6-bis(chloroethylamido)pyridine, which is converted to the sensor BADPA-P by 2,2′-dipicolylamine displacement of chlorine. This compound along with two others, the mono-DPA, ADPA-P and the benzyl in place of pyridyl, BADPA-B, present three potential Zn²⁺ sensors. It was found that BADPA-P in the presence of Zn²⁺ shows a large increase in fluorescence, whether in polar organic or aqueous environments. Its fluorescence in the presence of Cd²⁺, unlike with Zn²⁺, is not enhanced when excited at longer wavelengths. Proton NMR measurements, indicate two Zn²⁺ ions bind to BADPA-P. Also, Zn²⁺ enhances fluorescence even when other metal ions are present.     

A highly selective turn-on fluorescent chemosensor for copper(II) ion

A new pyrene derivative (1) containing a diaminomaleonitrile moiety exhibits high selectivity for Cu²⁺ detection. Significant fluorescence enhancement was observed with chemosensor 1 in the presence of Cu²⁺. However, the metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Fe²⁺, Fe³⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ produced only minor changes in fluorescence values for the system. The apparent association constant (K_a) of Cu²⁺ binding in chemosensor 1 was found to be 5.55×10³ M⁻¹. The maximum fluorescence enhancement caused by Cu²⁺ binding in chemosensor 1 was observed over the pH range 5-7.5.