热敏性高分子接枝聚苯乙烯微球的制备

通过使聚N－乙烯基异丁酰胺（PNVIBA）大分子单体与苯乙烯在乙醇／水的混合溶剂中进行自由基分散共聚，得到热敏性PNVIBA接枝聚苯乙烯（PNVIBA－g-PSt)高分子微球。用TEM对微球的形态进行了观察，同时考察了起始PNVIBA大分子单体浓度、苯乙烯浓度、引发剂浓度、聚合温度和混合溶剂中水对微球直径的影响。发现在较宽的聚合反应条件下，得到的接枝高分子颗粒均保持球形并具有单分散性，微球的数均直径（D）与反应条件的关系遵循：D＝K[PNVIBA]^-0.39[St]^0.80[I]^-0.14;微球直径随聚合温度的升高和混合溶剂中水含量增加而降低；颗粒形态可以通过改变聚合反应条件或添加第二小分子单体加以控制。     

分散共聚法制备特殊形态高分子微球的研究

以聚乙二醇 (PEG)大分子单体为反应性稳定剂 ,在丙烯腈的分散共聚反应中添加少量苯乙烯以形成疏水性核 ,制备得到了亚微米级高分子微球 .透射电子显微镜研究表明 ,该高分子微球具有特异的形态结构 .同时研究了分散共聚体系中各种反应因素对微球形态和直径的影响 ,结果表明 ,苯乙烯单体的添加量、PEG大分子单体的浓度及分子量、混合溶剂的组成对微球直径和形态均有明显的影响 .X 射线光电子能谱 (XPS)研究结果表明 ,微球表面聚集有亲水性PEG链 ,核为疏水的聚 (丙烯腈 苯乙烯 ) ,即形成的特异形态的PEG接枝高分子微球亦为复合型结构     

PAm-g-PMAA亲水性聚合物微球的合成

利用链转移自由基聚合和端基置换反应法 ,合成了苯乙烯基单封端的聚甲基丙烯酸叔丁酯 (PBMA)大分子单体 .在N ,N′ 亚甲基二丙烯酰胺 (Bis A)存在的条件下 ,使PBMA大分子单体与亲水性单体丙烯酰胺(Am)在乙醇 水的混合介质中进行分散共聚反应 ,得到了表面为PBMA接枝的聚丙烯酰胺 (PAm g PBMA)聚合物微球 .将所得PAm g PBMA微球在酸性条件下水解 ,得到了整体亲水的聚甲基丙烯酸接枝的聚丙烯酰胺(PAm g PMAA)聚合物微球 .用激光光散射、透射电子显微镜和X射线光电子能谱仪等对聚合物微球的直径、形态及表面组成进行了表征 .研究结果表明 ,在共聚反应中PBMA大分子单体的分子量与浓度、Bis A浓度和介质的组成对微球的形成与颗粒直径的大小有明显影响 ;所形成的聚合物颗粒是以PBMA为壳、以交联PAm为核的核壳结构微球 .     

PSt种子与“花瓣”形PSt/PAN复合颗粒的制备

以过硫酸钾为引发剂,在乙醇/水的混合介质中使苯乙烯进行无皂乳液聚合,得到了单分散亚微米级聚苯乙烯(PSt)微球.用扫描电子显微镜研究了引发剂浓度、单体浓度、反应温度和溶剂组成对PSt微球粒径的影响.结果表明,改变上述条件能明显影响其粒径.以所得单分散聚苯乙烯微球为种子,在丙烯酸单封端聚乙二醇大分子单体存在的条件下,使丙烯腈和少量苯乙烯进行新的无皂种子乳液聚合,在合适的条件下制得到了“花瓣”形的聚合物复合颗粒,为深入探讨这类特殊形态聚合物颗粒的形成机理提供了新的佐证.     

PNVA-g-PSt微球的功能化与离子吸附研究

由大分子单体法合成了表面聚N-乙烯基乙酰胺接枝聚苯乙烯(PNVA-g-PSt)微球,通过对该接枝链进行化学改性得到了新型功能化高分子微球.用透射电子显微镜、激光光散射和X射线光电子能谱对高分子微球的形态、表面组成和直径大小进行了表征,发现微球经水解后形态更加规整,在分散状态下直径有所增加且保持核-壳型结构.实验比较了几种高分子微球对Cu2 ,Pb2 离子的吸附效果.定量测定结果表明:高分子微球经功能化处理后,其吸附效果有了很大的改进,在较低浓度范围,Pb2 离子的脱除率可达100%.     

两亲磁性高分子微球的合成与表征

在Fe3O4磁流体存在下 ,通过苯乙烯与聚氧乙烯大分子单体 (MPEO)分散共聚制备两亲磁性高分子微球 .研究了聚氧乙烯大分子单体对微球粒径的影响 .用扫描电子显微镜 (SEM)、原子力显微镜 (AFM)表征了磁性微球的粒径、表面形貌以及表面粗糙度 ,用傅立叶红外光谱 (FTIR)鉴定了共聚物的结构 .随着聚合物中聚氧乙烯大分子单体含量的增加 ,微球表面的粗糙度增加 ,通过改变共聚物中MPEO的含量 ,可以得到含有 0 4～ 3 5mg g羟值的两亲磁性高分子微球     

醇/水介质对PEG大分子单体与BMA分散共聚反应的影响

通过端基反应法合成了苯乙烯单封端的聚乙二醇(St- PEG)大分子单体,使其与甲基丙烯酸丁酯(BMA)在乙醇 水混合介质中进行分散共聚,得到了聚乙二醇接枝的聚甲基丙烯酸丁酯(PBMA- g -PEG)高分子微球.PBMA- g -PEG共聚物的亲溶剂 疏溶剂平衡将影响微球的形成,反应结束时,体系随BMA浓度和介质中水含量的变化呈现出4种不同的状态,透明清液、乳液、伴有沉淀或凝胶的乳液和凝胶.用透射电子显微镜(TEM)和激光光散射(LLS)对乳液体系的粒径及其形态进行了表征,表明所得接枝高分子微球形态规整具有较好的单分散性.通过控制介质中水的含量和BMA的浓度可得粒径在4 0～5 0 0nm范围的PBMA -g -PEG微球.     

磁性SiO2/PSt中空复合微球的细乳液法制备及表征

采用双原位细乳液聚合工艺,将疏水改性的磁性纳米粒子(MNP)加入到细乳液反应体系的油相中,利用增长的聚合物和单体TEOS之间的相分离原理,实现了聚合物的生成和TEOS的水解缩合同步进行,一步获得了磁性SiO2/PSt中空复合微球.通过红外光谱(FTIR)、透射电镜(TEM)、热重差热分析(TGA/DSC)和振动磁强计(VSM)对中空复合微球进行了表征.结果表明,制备的SiO2/PSt中空复合微球的尺寸范围为300～600 nm,当加入磁性纳米粒子后,得到的磁性SiO2/PSt中空微球保持了原来的中空结构,中空复合微球内腔的大小可以通过改变单体TEOS的加入量来控制.SiO2/PSt中空微球对磁性纳米粒子的包封率达到了86%.磁性SiO2/PSt中空复合微球具有超顺磁性,饱和磁强度值为14.7 emu/g.     

大分子单体聚N-乙烯甲酰胺与苯乙烯共聚合成热敏性功能高分子微球

用自由基聚合法合成了大分子单体聚N 乙烯甲酰胺和功能高分子微球 .用GPC、分光光度仪和扫描电子显微镜等对合成的聚合物进行了表征 .研究结果表明 ,大分子单体聚N 乙烯甲酰胺和功能高分子微球具有明显的热敏性特性 ,且合成的功能高分子微球具有单分散性 ,粒径在 1～ 5 μm之间     

分散聚合-种子溶胀聚合法制备中空微球的研究

采用分散聚合法制备聚苯乙烯(PSt).以甲苯一正辛醇作致孔溶剂,过氧化苯甲酰为引发剂,PSt为单分散种球,反应单体苯乙烯和交联单体二乙烯基苯(DVB)通过种子溶胀聚合法,在水介质中制备了呈单分散的中空聚合物微球[P(St-DVB),粒径5 μm-8μm],其形态及热力学行为经SEM,DSC和TGA表征.讨论了DVB用量及溶剂组成对P(St-DVB)形态的影响.     

ATRP合成大分子单体法制备核壳结构微球

以α-溴代丙酸乙酯(EPN-Br)为引发剂, N,N, N′,N″,N″-五甲基二亚乙基三胺(PMDETA)为配体,使甲基丙烯酸叔丁酯进行原子转移自由基聚合,合成了端基带溴原子的聚甲基丙烯酸叔丁酯(PtBMA-Br)大分子中间体,通过其与甲基丙烯酸的亲核取代反应,得到了末端C=C双键含量高的大分子单体（MAA-PtBMA）,其相对分子质量可控制在5400-12000g/mol的范围内,分子量分布≤1.20。以偶氮二异丁腈为自由基引发剂,在乙醇中使MAA-PtBMA大分子单体与苯乙烯（St）进行分散共聚,制得了甲基丙烯酸叔丁酯接枝聚苯乙烯（PtBMA-g-PSt）微米级共聚微球,该微球具有核壳结构。     

SYNTHESIS AND POLYMERIZATION OF α-METHACRYLYOXYLETHYLOXYCARBONYLMETHYL-ω-(N,N-DIETHYLDITHIOCARBAMYL)POLYSTYRENE MACROMONOMERS

Polystyrene macromonomers with different molecular weight were prepared by radical polymerization of styrene(St) in benzene using β-methacryloxylethyl 2-N,N-diethyldithiocarbamylacetate (MAEDCA) as a monomer-iniferter.Characterization of the macromonomer by ~1H-NMR showed that the end groups were α-methacrylyoxylethyloxycarbonyl-methyl and ω-(N,N-diethyldithiocarbamyl). The macromonomer was difficult to homopolymerize, but it was easilycopolymerized with methyl methacrylate (MMA) initiated by AIBN to form graft copolymers (PMMA-g-PSt) with PStbranches randomly distributed along the PMMA backbone. Copolymerization reaction and the structure of the graftcopolymers were strongly affected by M_n and concentration of the macromonomer. The composition and M_n of the purified graft copolymer were determined by ~1H-NMR and GPC analysis.     

Preparation of P4VP-g-PSt Copolymer Microspheres with Controllable Size by Atom Transfer Radical Polymerization Synthesized Poly(4-vinylpyridine) Macromonomer

Poly(4‐vinylpyridine) macromonomer (St‐P4VP) with a styryl end group was synthesized by atom transfer radical polymerization (ATRP) of 4‐vinylpyridine using p‐(chloromethyl)styrene (CMSt) as functional initiator, CuCl as catalyst and tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as ligand in 2‐propanol. The structure of St‐P4VP macromonomer was identified by proton nuclear magnetic resonance (¹H NMR). The result of gel permeation chromatography (GPC) illustrated that the number‐average molecular weight of St‐P4VP could be controlled by adjusting polymerization conditions. Poly(4‐vinylpyridine) grafted polystyrene microspheres (P4VP‐g‐PSt) were then prepared by dispersion copolymerization of styrene with St‐P4VP macromonomers. The effects of polymerization reaction parameters such as medium polarity, concentration of St‐P4VP macromonomer and polymerization temperature on the sizes and size distribution of P4VP‐g‐PSt microspheres were investigated. The results of transmission electron microscopy (TEM), scanning electron microscopy (SEM) and laser light scattering (LLS) indicated that mono‐dispersed P4VP‐g‐PSt microspheres with average diameters of 100–200 nm could be obtained when the molar ratio of St to St‐P4VP was 0.25:100 in ethanol/water mixed solvents (V/V=80:20) at 60°C. Such kind of graft copolymer microspheres was expected to be applied to many fields such as drug delivery system and protein adsorption/separation system due to their particular structure.     

Graft copolymers having hydrophobic backbone and hydrophilic branches. X. Preparation and properties of water-dispersible polyanionic microspheres having poly(methacrylic acid) branches on their surfaces

The free radical copolymerization of poly(t-butyl methacrylate) (PBMA) macromonomer with styrene in ethanol give monodispersed microspheres with 0.8-1.6 μm diameter. The resulting microspheres were treated with HCl solution to convert into anionic microspheres having poly(methacrylic acid) chains. ESCA analysis of the microsphere surface suggested that PBMA chains were favorably located on the surface of the microspheres. The particle size of the microspheres decreased with increasing molecular weight and concentration of the macromonomer. Water dispersibilities of the microspheres were evaluated by measuring the relative turbidity of the suspension of microspheres as a function of pH. The results show that they were strongly dependent on pH. © 1995 John Wiley & Sons, Inc.     

Transport of Water and Ions Through a Clay Membrane

Colloidal platinum nanoparticles were prepared by ethanol reduction of PtCl(6)(2-) in the presence of poly(N-vinylformamide) (PNVF), poly(N-vinylacetamide) (PNVA), or poly(N-vinylisobuty-ramide) (PNVIBA). The effects of molecular weight and molar ratio of monomeric unit/Pt on the particle sizes and size distributions were characterized by transmission electron microscopy and UV-visible spectroscopy. The flocculation behavior of the polymer-stabilized colloidal Pt nanoparticles was studied with respect to the effects of temperature, addition of inorganic salts, and composition of the mixed solvents. The dispersion stability of the platinum colloids stabilized by poly(N-isopropylacrylamide) (PNIPAAm) and poly(vinylpyrrolidone) (PVP) was also examined. The sequence of polymer-stabilized platinum colloids in increasing order of dispersion stability was found to be PNIPAAm-Pt相似文献   

Preparation of micron-size monodisperse polymer particles by dispersion copolymerization of styrene with poly(2-oxazoline) macromonomer

This article describes the preparation of micron-size monodisperse polymer particles by dispersion copolymerization of styrene with a poly(2-oxazoline) macromonomer in an aqueous ethanol solution. The macromonomer acted as a comonomer as well as a stabilizer. The diameter of the particles increased as the concentration of the macromonomer decreased. The higher the molecular weight of the macromonomer, the smaller the particle size. The copolymerization in the solvent containing higher water content gave smaller polymer particles. Under the condition giving the monodisperse particles, the particles volume increased linearly with the yield of the particles. From ESCA analysis of the particle surface, poly(2-oxazoline) chains were enriched on the surface. © 1993 John Wiley & Sons, Inc.     

Solvent replacement to thermo‐responsive nanoparticles from long‐subchain hyperbranched PSt grafted with PNIPAM for encapsulation

Long‐subchain hyperbranched polystyrene (lsc‐hp PSt) with uniform subchain length was obtained through copper‐catalyzed azide‐alkyne cycloaddition click chemistry from seesaw macromonomer of PSt having one alkynyl group anchored at the chain centre and two azido group attached to both chain ends [alkynyl‐(PSt‐N₃)₂]. After precipitation fraction, different portions of lsc‐hp PSt having narrow overall molecular weight distribution were obtained for further grafting with alkynyl‐capped poly(N‐isopropylacrylamide) (alkynyl‐PNIPAM), which was obtained via single‐electron transfer living radical polymerization of NIPAM with propargyl 2‐bromoisobutyrate as the initiator and grafted onto the peripheral azido groups of lsc‐hp PSt via click chemistry. Thus, amphiphilic lsc‐hp PSt grafted with PNIPAM chains (lsc‐hp PSt‐g‐PNIPAM) was obtained and would have star‐like conformation in tetrahydrofuran (THF). By replacing THF with water, lsc‐hp PSt‐g‐PNIPAM was dissolved at molecular level in aqueous solution due to the hydrophilicity of PNIPAM and exhibited thermal induced shrinkage of PNIPAM arms. The water‐insoluble lsc‐hp PSt would collapse densely and could be served as a reservoir to absorb hydrophobic chemicals in aqueous solution. The influence of overall molecular weight of lsc‐hp PSt on the absorption of pyrene was studied. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

High molecular weight monodisperse polystyrene microspheres prepared by dispersion polymerization,using a novel bifunctional macromonomer

A novel bifunctional vinyl‐terminated polyurethane macromonomer was applied to the dispersion polymerization of styrene in ethanol. Monodisperse polystyrene (PS) microspheres were successfully obtained above 15 wt % of macromonomer relative to styrene. The steep slope from the reduction of the average particle size reveals that the macromonomer can efficiently stabilize higher surface area of the particles when compared with a conventional stabilizer, poly(N‐vinylpyrrolidone). The stable and monodisperse PS microspheres having the weight‐average diameter of 1.2 μm and a good uniformity of 1.01 were obtained with 20 wt % polyurethane macromonomer. The grafting ratio of the PS calculated from ¹H NMR spectra linearly increased up to 0.048 with 20 wt % of the macromonomer. In addition, the high molecular weights (501,300 g/mol) of PS with increased glass transition and enhanced thermal degradation temperature were obtained. Thus, these results suggest that the bifunctional vinyl‐terminated polyurethane macromonomer acts as a reactive stabilizer, which gives polyurethane‐grafted PS with a high molecular weight. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3566–3573, 2005