大分子植酸-聚有机硅倍半氧烷的合成及性能

采用溶胶-凝胶方法, 无需小分子酸催化剂, 利用硅烷化植酸的反应活性和酸催化活性, 与硅烷单体共水解缩聚, 在聚有机硅倍半氧烷分子链上原位接枝植酸, 合成了分子量大于50000的大分子植酸-聚有机硅倍半氧烷. 用GPC, 13C NMR, 29Si NMR, XPS, Raman光谱, SEM及电化学测试等分析手段进行表征, 对比不同酸催化植酸-聚有机硅倍半氧烷(PAP), 单宁酸-聚有机硅半氧烷(TAP), 盐酸-聚有机硅半氧烷(HCP)的结构和性能, 发现植酸-聚有机硅倍半氧烷上的螯合基团与金属表面的活性基团反应而键合, 在金属表面形成致密的保护膜, PAP与TAP和HCP比较具有优异的防腐性能.     

有机锡硅氧烷和有机锡聚合物

高分子化合物化学的发展,不仅限于碳、氢的有机化合物。例如将硅代替大分子链结构中的碳,形成—Si—O—Si—型的高分子,它的性能就得到很大的改善。1937年开始研究有机硅化合物,1940年就合成了Si—O—Si型的高分子,而在侧链上带有有机基团,出现了名为聚有机硅氧烷这一类有机化合物。     

含羧基聚有机硅氧烷—PEO复合物与LiCF3SO3复合膜的离子传导性

本文研究了含羧基聚有机硅氧烷——PEO复合物与LiCF_3SO_3复合膜的离子传导性能。实验结果表明,利用PEO与含羧基聚有机硅氧烷复合的方法能进一步提高含羧基聚有机硅氧烷—Li~+固体电解质膜的离子传导性。此复合膜在室温下的离子导电率可达10~(-5)S cm~(-1)。本文还研究了复合膜中所用PEO的分子量、PEO用量,LiCF_3SO_3含量、交联剂用量及温度对复合膜离子传导性的影响。     

超支化聚碳硅氮烷的合成与表征

聚碳硅氮烷是一种新型含硅有机金属聚合物,其主链由硅氮碳连接而成,侧链为有机基团;与其它含硅聚合物(聚硅氮烷、聚碳硅烷等)类似,聚碳硅氮烷适于用做力学性能极佳且耐高温氧化的氮化硅(Si3N4)和氮化硅/碳化硅(Si3N4/SiC)复相陶瓷的前驱体.[1]超支化聚合物具有溶解性好、粘度低     

有机硅氧烷预聚体的合成及其在化学固沙中的应用

以甲基三乙氧基硅烷为反应物,在盐酸催化下水解缩合,合成无色透明粘稠的液体有机硅氧烷预聚体,IR和1H NMR表征证实其为目的产物;当有机硅氧烷预聚体与工业乙醇的体积比为1∶1,以质量分数0.60%的NaOH-CH3OH溶液为固化剂,加入该溶液0.05 mL,在30 ℃,预聚体交联固化时间为9 min;在50 ℃,预聚体交联固化时间为4 min;首次将有机硅氧烷预聚体,或它与聚乙烯醇（PVA20-88）的混合物用作化学固沙剂,形成的固结层具有较好的耐水性和较高的抗剪强度;当PVA20-88与有机硅氧烷预聚体的质量比为1∶4时,粘聚力达到483.7 kPa,内摩擦角为68.39°,在160 h的紫外光照射下,具有很好的耐老化性。     

有机硅氧烷嵌段共聚物的合成及表征

以不同分量的α,ω-双(γ-氨丙基)聚二甲基硅氧烷预聚物为软段,分别以聚芳 酯、聚酰亚胺为硬段合成了嵌段长短不同及含量不同的聚有机硅氧烷-聚芳酯嵌段共聚物和聚有机硅氧烷-聚酰亚胺嵌段共聚物。     

聚有机硅倍半氧烷的合成及其在涂层材料中的应用

聚有机硅倍半氧烷由于具有优异的力学、电学、光学性能,近年来被广泛应用作涂层材料以提高其热稳定性、耐腐蚀性、耐磨性、耐刮伤性、绝缘性等。介绍了聚有机硅倍半氧烷的合成方法及其在涂层材料中的应用。     

含安息香醚的硅氧烷合成及性能研究

在紫外光引发聚合过程中,安息香醚在光敏有机硅预聚物中相容性较差,从而影响聚合物光敏固化速度。为了改进其相容性,曾有文献报道合成含安息香醚的有机硅氧烷的有关工作。我们采用七甲基环四硅氧烷与α-烯丙基安息香醚(Ⅰ_(a,b))加成的方法,合成了未见报道的以碳硅键合安息香乙醚或丁醚为侧基的环状有机硅氧烷(Ⅱ_(a,b)),将其开环聚合得到相应的线型聚有机硅氧烷(Ⅲ_(a,b)),通过~1H NMR、IR、UV和元素分析对Ⅰ_(a,b),Ⅱ_(a,b)和Ⅲ_(a,b)的化学结构进行了表征,并研究了紫外光照射下Ⅰ_(a,b)、Ⅱ_(a,b)和Ⅲ_(a,b)对聚甲基γ-(甲基丙烯酰氧)丙基硅     

硅酸钠与有机硅氧烷前驱体自组装杂化硅基中孔材料

采用有机硅氧烷(RTES)与硅酸钠(Na2SiO3)共水解缩聚合成有机官能化的MSU型硅基中孔材料.考察了合成体系pH值对材料织构性能的影响以及不同有机硅氧烷与硅酸钠在中性条件下的自组装行为.发现在中性条件下，加入NaF可以有效避免带有较小有机基团的有机硅氧烷进入材料孔壁的可能性，而且合成体系的pH值对材料的孔径有一定的调控作用.     

环氧丙基杯[4]芳烃-壳聚糖交联聚合物的合成与吸附性能研究

通过1,3-二环氧丙基杯[4]芳烃衍生物与壳聚糖发生交联反应,合成了杯芳烃．壳聚糖聚合物。研究了其对阳离子的吸附性能后发现该聚合物结合了杯芳烃与壳聚糖的各自优势,不仅吸附能力较高,而且对Hg^2 表现出较好的吸附选择性。     

Preparation of Microemulsions of the Polysiloxanes Modified with Different Amines and Their Effect on the Color Shade of Dyed Cellulose

The microemulsions of three polysiloxanes modified with different amines are prepared. Three functional polysiloxanes are aminopropyl polydimethylsiloxane AP-PDMS, N-(β-aminoethyl)-γ-aminopropyl polydimethylsiloxane AEAP-PDMS, and N,N-(γ-dimethylamino-propyl)-γ-aminopropyl polydimethylsiloxane DMAP-PDMS, respectively. The effect of the microemulsions on the color shade of the dyed cellulose with reactive dyes is investigated by reflectance spectra, color yield (K/S), and the color differences (Δ E). The results show that the K/S of the yellow fabric treated with AP-PDMS decreased. The K/S of the red fabrics treated with AP-PDMS, AEAP-PDMS, and DMAP-PDMS all had very slight increase.The K/S of the blue fabrics treated with AP-PDMS, AEAP-PDMS, and DMAP-PDMS also all increased. The handle of the sample treated with AEAP-PDMS was better than those of the other samples, but the whiteness of it was worse. The wash fastness and the wet rubbing fastness of the dyed fabrics treated with three functional silicones had not noticeable change.     

Sorption extraction of palladium(II) with modified polysiloxane

Sorption of palladium(II) from model solutions with polysiloxanes modified with amine and thiourea groups was stidied and it was found that the maximum sorption on aminopropyl polysiloxane is shifted slightly to alkaline region compared with a sulfur-containing sorbent. First time an effect of a series of external factors on a sorption kinetics of palladium with polysiloxanes was researched, diffusion coefficients of sorbate ions were calculated, and evaluation of their dependence on an initial concentration of metal, a grain diameter of the sorbent, and a temperature of sorption environment was carried out. It is shown that quantitative desorption of palladium from thiocarbamoylated polysiloxane is achieved by double treating the sorbent with hydrochloric acid solution of thiourea at high temperature.     

聚硅氧烷热稳定性研究进展

综述了聚硅氧烷的热老化机理、影响其热稳定性的因素和提高其热稳定性的途径。聚硅氧烷的热老化反应主要包括热解聚和热氧化两个反应。氧气、水或醇、酸、碱或残留催化剂、硅油、机械外力、填料、聚硅氧烷的链端基等都会影响聚硅氧烷的热稳定性。提高聚硅氧烷热稳定性的途径主要有改变聚硅氧烷的分子结构以及在体系中添加热稳定剂。     

Syntheses, Crystal Structures and Complexing Properties of 1,3-Distal Calix[4]arene Schiff Bases

Novel 1,3-distal p-tert-butylcalix[4]arene Schiff bases were efficiently synthesized in three steps. At first p-tert-butylcalix[4]arene was reacted with N-2-hydroxyethylphthalimide catalyzed by TPP/DEAD or alkylated with ω-haloalkylphthalimide in the system of K2CO3/KI/CH3COCH3 to give 1,3-distal diphthalimidoalkyl calixarenes, which were in turn hydrazinolyzed to give diaminoalkyl calixarenes. Then with the aid of the condensation of active calixarene amines with salicylaldehyde, 2-hydroxy-1-naphthaldehyde or pyridine-2-carboxaldehyde, a series of 1,3-distal calixarene Schiff bases was prepared in satisfied yields. The single crystal structures and complexing properties of these Schiff bases for transition metal ions were studied.     

Preparation and Properties of the Emulsions of the Polysiloxane Material Modified with Tertiary Amino Side Chain

A series of the polysiloxane materials modified with tertiary amino groups were synthesized. FTIR, ¹H NMR were used to characterize the polysiloxane structure. The emulsions of the modified polysiloxanes are prepared. Some surface properties of the polysiloxane materials with tertiary amino groups as resins were discussed. The results show that the polysiloxane materials modified with tertiary amino side chains had good flexibility and the repellency to water. With increasing the amino value of the polysiloxanes, the flexibility of the fabrics treated with the emulsion was improved. After the samples treated with the polysiloxanes, the thermal yellowing of the polysiloxane had emerged. The whiteness of fabrics treated with the polysiloxane decreased. The K/S of the yellow fabrics treated with the modified polysiloxanes had not obvious change, the K/S of the red and blue fabrics treated with the modified polysiloxanes slightly decreased. The shapes of the reflectance spectra curves of the dyed fabrics treated without and with the modified polysiloxanes had not noticeable change.     

Properties of ABA and BA polysiloxane amphiphiles modified by polyether

To investigate the effect of content of polyether (F400) grafted on the properties of polysiloxane amphiphiles, polyether was grafted on the polysiloxane by hydrosilylation reaction with H₂PtCl₆ catalyst. The modified polysiloxanes were divided into two types; moreover, the ratio of polyether and polysiloxane was 1:1 or 1:2. The first one was similar to the conventional surfactant structure that is BA polysiloxane amphiphile, which own one hydrophobic chain and one hydrophilic group. Another one was ABA polysiloxane amphiphile, which possess one hydrophobic chain and two hydrophilic groups at the terminal. In our work, we compared the property of modified polysiloxanes with various contents of polyether in aqueous solution at room temperature to analyze the impact of polyether content on siloxane surfactants. The conclusion was that siloxane amphiphiles possess good solubility, high surface activity, and excellent spreading property.     

一种复合聚硅氧烷膜的结构与形貌及性能研究

在乙酸乙酯稀溶液中,将氨值为0.6 mmol/g、Mn=14100的聚(N-β-氨乙基-γ-氨丙基甲基硅氧烷-co-二甲基硅氧烷)(ASO)与羧值为0.3 mmol/g、Mn=4048的聚[γ-(β-羧基丙烯酰胺基)丙基甲基硅氧烷-co-十二烷基甲基硅氧烷-co-二甲基硅氧烷](RCAS)共混自组装,可获得一种静电复合的聚硅氧烷ASO/RCAS.以单晶硅和棉纤维织物作载膜基质,用原子力显微镜(AFM)和光电子能谱(XPS)等仪器对ASO/RCAS的膜形貌及应用性能进行了研究.结果表明,由ASO和RCAS复合成的ASO/RCAS,微观形貌呈连续丘陵状凸起,膜厚度为1.501 nm,在2μm×2μm扫描范围内其均方根粗糙度为0.5 nm.将其附着固定在棉纤维表面,ASO/RCAS不仅能引起纤维表面条纹状沟壑消失,而且能使纤维表面的均方根粗糙度从处理前的24.6 nm降低为处理后的11.7 nm.另外,用ASO/RCAS处理的棉织物,其弯曲刚度明显降低、亲水性增加,且表面有舒适的油润感.当ASO与RCAS的质量比为1∶1时,复合聚硅氧烷ASO/RCAS的应用性能最佳.     

Modification of epoxy-novolac resins with polysiloxane containing nitrile functional groups: synthesis and characterization

Synthesis of the statistical epoxidized polycyanopropylmethylsiloxane-co-polydimethylsiloxanes (PCPMS-co-PDMS) has been demonstrated. The modified polysiloxanes were prepared via a two-step method; (1) the ring-opening polymerization of octamethylcyclotetrasiloxane (D₄) and tetramethylcyclotetrasiloxane (D₄H), (2) hydrosilylation reaction of the polysiloxane prepolymers with allyl cyanide and allyl glycidyl ether. Molar ratios of D₄H and D₄ were varied to produce the modified polysiloxanes with differences in polarity. ¹H-NMR, ²⁹Si-NMR, ¹³C-NMR and FTIR were used to monitor the formation of the modified polysiloxanes and DSC was used to study their thermal behaviors (T_g, −118 to −68 °C). The use of the modified polysiloxanes as an elastomeric component in epoxy-novolac networks was also investigated. TEM and their transition temperatures suggested that the epoxy-novolac networks with high content of PDMS modifiers exhibited microphase separation. The fracture toughness properties of the networks with the polysiloxane modifiers were improved over the controls without polysiloxanes.     

PHASE STRUCTURE AND PROPERTIES OF EPOXY RESIN MODIFIED BY POLYSILOXANE BEARING PENDANT AMINO GROUPS

Polysiloxane-modified epoxy resins were prepared through the reaction of epoxy resin with polydimethylsiloxanesbearing pendant N-(β-aminoethyl)-γ-aminopropyl groups. The morphology and properties of the cured epoxy resins modifiedby the polysiloxanes were investigated. It was found that the phase structure and properties of the cured epoxy resins dependmainly on the amino group content in the polydimethylsiloxane and the level of the modifier. The change of phase structurein the cured epoxy resin systems was responsible for the dramatic change in their mechanical and surface properties.     

Thermal stability of hybrid materials based on epoxy functional (poly)siloxanes

Epoxy functional (poly)siloxanes are one of the most important classes of modified silicones. Due to high reactivity of epoxy group and specific features of siloxane chain, they can make an excellent raw material for synthesis of hybrid materials. Results obtained in this study have shown that both the modification of epoxy resins with epoxy functional disiloxanes as well as the application of polysiloxanes with long polysiloxane chains and a specified content of epoxy groups makes it possible to produce hybrid materials of very good thermal stability. Crosslinking reactions were carried out with use of four diamines of which the best one appeared to be 4,4??-diaminodiphenylmethane. The highest thermal stability was found in the case of hybrid materials obtained from epoxy functional polysiloxanes.